Now here's a weird one. Bash cuts off at 50 characters.

In tty, if I type more than 50 characters(including prompt) at the prompt it starts to wrap at the other side. I'm running at VGA, so this shouldn't be happening, right?

this is usually a PS1 issue. you have to wrap any \[non-printing characters\] like so:
PS1='\[\e[1;31m\]u\[\e[0m\]@\[\e[1;33m\]h \[\e[0m\]>'

Similar Messages

HP PSC 2355 all-in-one printer cuts off bottoms of letters

My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
On a Mac, 10.9.3.

Hi @timed
I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

SMS is cut off at 153 characters!

Hi all,
Been searching everywhere for a solution to this one.
When I receive long texts, they're cut off at 153 characters.
After a little bit of investigating with FileZ, I found that the rest of the message contents are in "SMS Messages2"!
I know it's not the SIM card as I've tried it in another phone and it worked. Also, the message is obviously arriving on the phone.
Also tried dbFixit but that reports no errors.
Tired deleting SMS Messages2 but still no joy.
Would rather not delete Message Database but if I have to...
Thanks in advance,
TimO
Post relates to: Treo 680 (Unlocked GSM)
This question was solved.
View Solution.

I had the same problem n got it solved through palm live chat. Here's the solution:
1. Download and install File on the device from http://www.freewarepalm.com/utilities/filez.shtml
This third party web site link is provided by Palm as a convenience to you. The content or software provided on this web site is not owned or maintained by Palm. Palm is not responsible for the information.
2. Go to "View Preferences" (If you're in "View and edit files" mode, press "close" to go back to the main screen).
3. Choose 'Saved' on the selection on the right side.
4. Find PIL! key and delete it.
5. Done, it doesn't even need a reset.
Post relates to: Centro (Unlocked GSM)

HT1399 I downloaded an album, but one song cuts off just a few bars in. How do I reload that album to capture the whole thing?

I downloaded an album, but one of the songs cuts off a few bars in. Do I need to reload that song/that album and how do I do that? Also, how do I take songs out of my library and "park" them somewhere in case I want to put them back in? Right now I'm just really sick of some songs.

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

XLST-mapping get's cut off after 4440 characters per tag

Hi there,
I currently have a problem with a XSLT-mapping in SAP PI: The mapping itself is working fine and correct. It is transforming the input-xml and the creates a well-formed xml-output.
But I have a problem when a xml-tag is having more than 4440 characters in it. In this case the XML-output just gets cut off, eaven there are plenty more chararcters left. Is there any way that this xml-tag still get's created?
regards
Christian Gessner

Hi there,
I currently have a problem with a XSLT-mapping in SAP PI: The mapping itself is working fine and correct. It is transforming the input-xml and the creates a well-formed xml-output.
But I have a problem when a xml-tag is having more than 4440 characters in it. In this case the XML-output just gets cut off, eaven there are plenty more chararcters left. Is there any way that this xml-tag still get's created?
regards
Christian Gessner

Iw64 long text cuts off after certain characters

Hi all,
I have requirement where the issue is that long text is not printing completely and getting cut off in certain number of characters.
Any help is appreciated.

It still wraps up the output.
You may have embedded carriage returns in your columns.
Let me explain you with an example.
SQL> create table mytable(col1 varchar2(80));
SQL> insert into mytable
2 select lpad('ab',80,'cd') from dual;
1 row created.
SQL> select lpad('ab',50,'cd')||chr(10)||lpad('ab',29,'cd') from dual
2
SQL> insert into mytable
2 select lpad('ab',50,'cd')||chr(10)||lpad('ab',29,'cd') from dual;
1 row created.
SQL> select * from mytable;
COL1
cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdab
cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdab
cdcdcdcdcdcdcdcdcdcdcdcdcdcab

Here's a weird one: DAE + DTDM

A couple of months after Logic Pro 7.2.3 was released I felt confident in the posts I was reading about it and decided to upgrade. Well it wasn't too long before it was obvious that it was not working well for me - glitches, quitting, generally unstable - so I uninstalled it and went back to 7.2.1. Since then LP has been fairly reliable but I have wanted to enjoy the benefits of all 4 processors and thought I would look into upgrading again. I had previously been using OS X 10.4.6 since Pro Tools 7.1 was not qualified past that version, but now it is qualified for 10.4.8 so I upgraded the OS and LP and Pro Application support at the same time.
Then something very strange happened.
I had finished working on a cue which used mostly DTDM instances of EXS24 and a few DAE tracks for vocals and reverbs. The master DAE output 1-2 had a Waves L1 on it and everything seemed fine. After shutting down my system and booting up the next day, the same song which had played perfectly the day before was now only playing out of the left side. Further investigation showed that all DTDM objects were only coming out of the left while all DAE objects were coming out in stereo. I removed the L1 from the master output but no change. I switched all of my tracks to come out of output 3-4 and now everything played in stereo. I worked like this until the end of the day and then inserted an L1 on output 3-4 and the right side disappeared again. I bounced without the L1 and shutdown. The next day I did a test and found that I could not insert an L1 on out 3-4 without losing the right side but when I switched all tracks back to out 1-2 I could use the L1 fine.
This has never happened before and I'm wondering if for some reason LP 7.2.3 is just not happy on my system.
I read a post where someone mentioned that Pro Tools 7.3cs3 was the most stable combination with LP they have seen in awhile. Anyone else have this experience?
Thanks,
MQ
Quad G5 - 6.5 gig RAM Mac OS X (10.4.8) Logic 7.2.3 / ProTools 7.1cs10 HD2

I read a post where someone mentioned that Pro Tools 7.3cs3 was the most >stable combination with LP they have seen in awhile. Anyone else have this >experience?
It's been running pretty good here. (10.4.9)
To operate Audio suite plug-ins is much smoother than before.
No strange error anymore.
We get severe distorion from the DTDM sounds ...
This seems to be caused by "Stream Manager" for EXS24 TDM.
Indigos (Virus) use DSP but EXS24s use stream manager.
This is the most buggy part of Logic TDM.
Keep some DAE Aux tracks for EXS24 TDM for all your songs.
Whenever you get the distotion (most likely it happens when loading new large presets or reset Multi in Kontakt2 or loading more loops in Stylus RMX),
simply instanciate EXS24 TDM on Aux track or do opposit way.
This fix the problem right away so that I always have DAE Aux track with EXS24 right next of Kontakt2 track in arrange window.
This bug is almost nothing. No big deal.
Newer version of Reactor5 was little bit buggy. I deleted the preference of the plugin and it fixed the problem.
Eventide reverb (part of AnthologyII) gets "DAE error 7053" when I change presets during playback. This bug is also almost nothing.
Altiverb XL TDM v6.0.7 cause "internal signal loop by itself. This bug was sooo bad and I had no clue how to fix. I re-installed v6.0.6 and it does not cause the problem. (mono version of v6.0.7 on Aux track did not cause this error but I went back to previous version anyway bucause I want use it on Bus track)
This plugin does not show the name and Audio Ease said it's Logic's bug.
(hard to beleive it bucause all other TDM plugin does not have this problem.)
To instanciate Waves L3 LL TDM sometimes does not show the interface.
Simply double click the plugin to re-open to fix. No big deal at all.
Sometime my Logic does crash and I think it is most likely caused by stream manager and Kontakt2. (my $0.02)
DTDM section is basically very stable and I see no bugs.
I usually don't think about these bugs and finish lots of project without crash.

Here's A Weird One For Y'all

So, because I'm using Apple TV at home with an old Sony TV, I had to buy an HDMi to DVI-D cable then realized that the TV didn't have a digital audio input. I then purchased an Optical audio in to RCA out converter and installed it. (Haven't got it to work yet. When I click the buttons on the remote control, I hear that through the TV but when I play a movie or iTunes, I hear nothing). Anyway . . .
Later that day, I'm recording a session in my studio on my iMac using ProTools 9 and I'm laying down a guitar part to a song that's been recorded for almost a month. I'm scratching my head because after tuning the guitar at concert pitch, it's totally out of tune with the track. Not knowing what to do, I tune the guitar to the track, play my part and I'm done with it. Afterwards, I use X-Form to tune an 808 kick drum (not bcz it was out of tune, I just did it for another reason).
I turn on the vocal tracks and realize that they sound awful. The pitch is lower and they sounbd as if they'd been heavily processed with a bad version of Auto Tune. I start checking my system to figure out what the hecks gone a miss. I look at Elastic Audio, X-Form etc. I check the Preferences, restart my computer and even open up previous auto saved versions of the song. Nothing's wrong. For the life of me I'm stumped so I go the Avid website and try describe my situation and nothing really comes up but out of the corner of my eye I see someone has written about clocking issues and sample rates. Bingo! I'm reminded how changing the sample rate of a sesion (say from 48 kHz to 44.1 kHz) will drastically affect the pitch and tempo of an audio file if it's not first converted to whatever format you wish to change it to.
Then I remember (but am very doubtful this has anything to do with my problem) I had switched the audio selection in my Apple TV Menu to 16 bit (instead of auto) in order to see if it helped my Apple TV audio problem). All along I'm thinking well, this is stupid. How would switching my Apple TV audio affect ProTools on my iMac? They're not connected! I still don't know the answer, however when I switched the audio menu back to "Auto" from 16bit, Protools played back my track perfectly in tune. Somehow, switching the Apple TV audio to 16 bit also converted my ProTools session from 48 kHz to 44.1kHz!!! I have no clue how that happened.
Anyone else ever come across this weird phenomenon?

Hi Willi,
Thankyou so much for pointing out the error of my ways....
You are obviously an expert, but one does have to ask are you the expert in: what is appropriate / required for my business, for this particular job, with this particular client or this particular printer (as specified by the client)? Are you the expert in the options available to me in regional Australia?
Yet you can decide that my workflow is wrong when you have no idea of all this; or the final output for the file. I also publish eBooks and interactive workbooks for students and guess what, for those I don't use PS. For some jobs one has no choice but to go with the clients choices, they are the ones paying the money after all. I know that this workflow is not the most efficient, however it was the choice available to me.
I posted the original question as I had never seen the problem of a single page disappearing, thought it was interesting and that others may have had the same / similar problems and would therefore find constructive answers interesting.

Here's a weird one

I am running a very simple query against a table
select * from nom_hierarchy where signf=1;
This query causes a Ora-03113 error to occur. If I do a
select * from nom_hierarchy where signf<>1;
it works!
the column signf is defined as NUMBER(1,0) not null default(0)
and there are several of these in the table. I have tried similar queries on those columns and not had a problem.
have put a call into Oracle for this problem. But just wanted let you all know that Oracle does seem to have some weird bugs within it. I've found many query bugs in Oracle and thank god the RULE hint still exists.

> the version is 10gR2
Need the full version number - to the 4th number. 10.1.0.2 is very different than 10.2.0.1 ito patch sets and even possibly some features.
> This column is not indexed, there are two indexes on the table. If one is
corrupt, why does it affect just this query in this way?
That depends on the execution plan. Can you post it when using the CBO (and failing) and when using the RBO?
> I'm not able to check the alert log, The DBA did that and basically he stated
that we are to contact Oracle.
Silly IMO. The first cause of action should be to look at the error code of that internal error and looking it up on Metalink's ORA-600 lookup tool. This often gives an accurate diagnosis of the problem and at times a URL to the bug and patch number applicable to solve it.
> But implying that the CBO is perfect and Oracle not buggy, Maybe I'm just
having some bad luck?
The CBO is more often than not incorrectly understood, abused and then slammed as not working correctly.
My take is that one has to deal with evidence and facts. And the little you have provided do not point to the CBO as being The Problem. And I've only ever ran into a single dinkum real CBO bug - I have a lot more "worse luck" (?) with internal Oracle errors such as DFS lock handles, PL/SQL states being reset for what seems to be no reason, enqueues on flushing warm buffers, etc.
Oracle is not bug free by any means. But it is very far from a buggy product. And my experience says that when dealing with new developers to Oracle, 99% of their so-called Oracle bugs are not - instead these are bugs in their code or in their understanding of an Oracle feature.
Not saying that this is the case with the problem you've reported. Does not at all sound like a "developer-end" induced problem.
But nor would I attribute it immediately to the CBO either. One need to isolate the error before making any call whether or not even Oracle itself is to blame for the error (it could be a corrupted data block for example).
I've once had very nasty Oracle I/O errors.. which turned out to have nothing to do with Oracle itself, but incompatibility issues with the storage vendor's I/O load balancing driver software.
An accurate diagnosis depends on a detailed problem analysis in order to isolate the problem. Any calls made before that is just speculation.

IPod Touch 4G cuts off last few seconds of song.

My iPod touch cuts of the last few seconds of songs, the longer the song, the more is cut off. Think "Yes - Yours Is No Disgrace", lists the time as 9:40 in the playlist, but on the "now playing" screen is only 9:35. No problem in iTunes or my other 3 iPods with the same song. It's very consistent and always happens at the same place. "gapless album" setting makes no difference. I will try re-ripping the album with iTunes to see if that helps, but don't see why it should.

Resetting "almost" worked - the first time I played the song after resetting it showed 9:40 in the now playing screen, but ultimately it still cut off, and then when I restarted the song it again showed only 9:35. But thanks for the suggestion.
I re-ripped the album using iTunes, and it now plays fine. I am suspecting that the decoder used in the iPod touch is different from other iPods. Now I've got to go and re-rip all the albums that have the problem <groan>.

Ipod cuts off a song?

alright, it's been a while.
I've got one song a friend of mine made, and gave to me (we do music gigs together), but the track cuts off at about 24 seconds, and goes to the next song. Funny thing is, it plays fine through on my iTunes, but just that one track cuts off on my ipod.
Thing is, I have over 10 songs that we've done together and the other ones play fine. Still, is this an issue with encoding? I've tried reseting the ipawd and whatnot. Thanks for any suggestions.

Hi. This is a known issue. The iPod Classic seems to fail to play the occasional track that iTunes, and indeed earlier iPod's, has been happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored but causes the iPod to bail out. The workaround is to get iTunes to re-encode the file, e.g. convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if & when the bug is resolved you can put your original file back onto the iPod.
tt2

Song Titles Get Cut Off

I have decided to convert all of the music on my computer from MP3 to AAC format, but when i convert songs the titles tend to be cut off after 35 characters or less. A good portion of my music has rather long names in the file titles because some of them have either those featured on the song or the name of the album within the file title while they are MP3, but after having converted them to AAC this causes an inconvenience because the title will be cut off at odd places such as just after the "artist - album title" or for example if the song title itself was "portion of the song title" the newly created AAC file will only display "artist - album title - portio" rather than "artist - album title - portion of the song title" as would be preferred. I have tried turning of the option of "Automatically retrieve CD track names from the Internet" and this has not helped at all.
Is the shortening of the song titles simply an issue that I will just have to live with or is there some other option/possibly downloadable patch that could stop this from happening to my selection of music? I would love to convert the music to AAC but i also enjoy not having sore eyes and a headache from tedious tasks like copying and pasting the song names from a website into the file names for hours. Any help would be greatly appreciated.

it wouldnt be such a problem if the conversion process just cut out the album title in the name of the file, but it's the fact that the album title remains part of the file title and the song name will be cut off instead so when viewing the files in the folder they all have either the exact same name minus and appended number or they all have only a portion of the title to the track

Itunes cut off song names

My songs names are cutted by itunes, a tried to convert with the ID3 converter but nothing has changed...
Thank you for your help and sorry for my poor english.

If you mean that the file and folder names are cut off at 40 characters long, then that is a "feature" of iTunes for Windows.
tt2

Cut off song

If a song has 2.05 seconds on the listing and 2 seconds are silent, Qiucktime 10 stops the song at 2.03 -- and does not finish with the silent part. Does anyone know how to change QT 10 to play all the song, QT 7 did the whole song!

If you mean that the file and folder names are cut off at 40 characters long, then that is a "feature" of iTunes for Windows.
tt2

My friend wanted to create a new iCloud account that was different to her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now

My friend wanted to create a new iCloud account that was different to her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now what can I do to fix it she has paid or apps and songs and of she makes another account everything will be lost.
Need help please :) thanks

Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

Now here's a weird one. Bash cuts off at 50 characters.

Similar Messages

Maybe you are looking for