NPS and Cisco ASA 5510 - AnyConnect Certificate based authentication
Hi everyone,
Hoping someone can help please.
We're trying to go for a single VPN solution at our company, as we currently have a few through, when buying other companies.
We're currently running a 2008 R2 domain, so we're looking at NPS and we have Cisco ASA 5510 devices for the VPN side.
What we would like to achieve, is certificate based authentication. So, user laptop has certificate applied via group policy based on domain membership and group settings, then user goes home. They connect via Cisco AnyConnect via the Cisco ASA 5510 and
then that talks to MS 2008 R2 NPS and authenticates for VPN access and following that, network connectivity.
Has anyone implemented this before and if so, are there any guides available please?
Many Thanks,
Dean.
Hi Dean,
Thanks for posting here.
Yes, this is possible . But we have guide about a sample that using Windows based server (RRAS) to act as VPN server and working with Windows RADIUS/NPS server and use certificate based authentication method (Extensible Authentication Protocol-Transport
Layer Security (EAP-TLS) or PEAP-TLS without smart cards) for reference :
Checklist: Configure NPS for Dial-Up and VPN Access
http://technet.microsoft.com/en-us/library/cc754114.aspx
Thanks.
Tiger Li
Tiger Li
TechNet Community Support
Similar Messages
-
OWA and ActiveSync certificate based authentication
I have Exchange 2013 CU3 installed and want to activate the certificate based authentication for ActiveSync and OWA. But I want to have the login without certificate as well for users without a certificate.
I already found some information how to do that on Exchange 2010 and I already did all steps to activate it.
But at one point I cant find anything to configure in Exchange 2013. So I have activated the AD certificate based authentication in ISS and configured the OWA folder in IIS to accept client certificates. This seems to work as I get asked to use the certificate
when I open the OWA page. But then I am landing on the OWA login page where I have to enter username and password.
So it seems that I am missing something. In the tutorials for Exchange 2010 they activate the certificate based authentication in the Management console. But I cant find anything in ECP to activate.
Can anyone help me?Hi,
We can create an additional Web Site in IIS to configure additional OWA and ECP virtual directory for external access. And configuring the Default Web Site for internal access.
Then we can configure internal one with Integrated Windows authentication and Basic authentication while the external one configured for forms-based authentication of Domain\user name format. For more information about
Configuring Multiple OWA/ECP Virtual Directories, we can refer to:
https://blogs.technet.com/b/exchange/archive/2011/01/17/configuring-multiple-owa-ecp-virtual-directories-on-exchange-2010-client-access-server.aspx
Thanks,
Winnie Liang
TechNet Community Support -
Anyconnect 3.1 and user certificate-based authentication
Hi experts,
I'm trying to test a basic full tunnel VPN connection from Anyconnect 3.1 installed on a Windows 7 machine to a Cisco ASA, using only certificate authentication.
Steps i took:
1) I've created a Windows 2008 certificate authority for testing, and imported the root CA certificate into both the Windows 7 client and into Cisco ASA
2) I generated a certificate signing request on the W7 client, got that signed by W2008 CA and imported the signed certificate into W7. Both user certificate and root CA are in the personal certificate store
3) On ASA, I've also generated a certificate signing request, got that signed by W2008 CA and imported the signed certificate back in ASA
I then used ASDM to configure ASA to support Anyconnect on its untrust interface.
When I use Anyconnect on the W7 client to connect to ASA, I got "No valid certificates available for authentication" and "certificate validation failure" messages as seen in the below screenshot
I can confirm that both user and root CA certificate exist in the personal certificate store
The corresponding ASA configuration and debug output are shown in the attached txt file. On the ASA, I've made sure its ID certificate has CN=<public IP of ASA> since I don't have a DNS setup in place.
Can anyone suggest what could be wrong with my setup?Problem has been fixed by using IP address instead of hostname in the Anyconnect Client profile, since I don't have a DNS setup in my environment.
Once that is done I was able to connect and authenticate using user certificates.
ASA1# sh vpn-sessiondb detail anycon
Session Type: AnyConnect Detailed
Username : cisco Index : 2
Assigned IP : 10.5.1.100 Public IP : 10.3.1.10
Protocol : IKEv2 IPsecOverNatT AnyConnect-Parent
License : AnyConnect Premium
Encryption : AES256 Hashing : none SHA1
Bytes Tx : 0 Bytes Rx : 30758
Pkts Tx : 0 Pkts Rx : 195
Pkts Tx Drop : 0 Pkts Rx Drop : 0
Group Policy : GroupPolicy_VPN-CP1 Tunnel Group : VPN-CP1
Login Time : 06:40:49 UTC Wed Feb 19 2014
Duration : 0h:07m:38s
Inactivity : 0h:00m:00s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
IKEv2 Tunnels: 1
IPsecOverNatT Tunnels: 1
AnyConnect-Parent Tunnels: 1
AnyConnect-Parent:
Tunnel ID : 2.1
Public IP : 10.3.1.10
Encryption : none Auth Mode : Certificate
Idle Time Out: 30 Minutes Idle TO Left : 22 Minutes
Client Type : AnyConnect
Client Ver : 3.1.05152
IKEv2:
Tunnel ID : 2.2
UDP Src Port : 50530 UDP Dst Port : 4500
Rem Auth Mode: Certificate
Loc Auth Mode: rsaCertificate
Encryption : AES256 Hashing : SHA1
Rekey Int (T): 86400 Seconds Rekey Left(T): 85941 Seconds
PRF : SHA1 D/H Group : 5
Filter Name :
Client OS : Windows
IPsecOverNatT:
Tunnel ID : 2.3
Local Addr : 0.0.0.0/0.0.0.0/0/0
Remote Addr : 10.5.1.100/255.255.255.255/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 28341 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607970 K-Bytes
Idle Time Out: 30 Minutes Idle TO Left : 29 Minutes
Bytes Tx : 0 Bytes Rx : 31218
Pkts Tx : 0 Pkts Rx : 196
NAC:
Reval Int (T): 0 Seconds Reval Left(T): 0 Seconds
SQ Int (T) : 0 Seconds EoU Age(T) : 459 Seconds
Hold Left (T): 0 Seconds Posture Token:
Redirect URL : -
ASA 5510 Anyconnect VPN question-"Hairpin" vpn connection on same external interface
I have a Cisco ASA 5510, I want to allow a VPN connection to be established by a client on one of the inside interfaces(10.20.x.x) to be able to go out the single External interface and get authenticated by the ASA to create a VPN tunnel to the other inside interface (10.0.X.X) and access resources on that subnet.
Basically want clients on a WLAN to be able to VPN back in to the LAN with the ASA in the middle to get to company resources,
Is this possible?
Thanks,
TommyWhen we connect any VPN on a device then it is always a TO THE DEVICE connection and I am afraid we can connect only to the local / nearest interface where user is connected in a network with respect to ASA.
I have seen this scenario working though earlier with one of my clients wherein he has configured his DNS server accordingly so that depending upon the source of the DNS request an appropriate IP address was provided for same DNS name. For example if user from IP address range 192.168.0.0 range connects to abc.com then it will get IP address 192.168.1.1 and if a user from range IP address10.0.0.0 connects then it will get 10.1.1.1.
If we configure the same scenario as well then your requirement will be fulfiled with same name however VPN has to be enabled on wireless interface again. If not, then as you have described configuring a new domain name for VPN connection only for wireless users should do the deal.
Regards,
Anuj -
Cisco ASA 5510 Site to Site VPN with Sonicwall
I am trying to setup a VPN tunnel between a Cisco ASA 5510 (Version 8.2(2)) and Sonicwall TZ200. I got tunnel up and going and I am able to ping the Cisco ASA internal IP from the Sonicwall LAN but nothing else works. When I try to ping a host behind the Cisco ASA from the Sonicwall LAN I get the following message "Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.20.10.x/xxxx dst inside:10.20.2.x/xxxx denied due to NAT reverse path failures" on the ASA
Googling the above error shows issues with version 8.3 and later which looked like the nat commands were changed but the ASA I am working on is still on 8.2 and the other common issue is not adding a NAT exemption. I have double-triple checked that I did add a NAT exception rule from the hosts on the cisco network to the hosts on the Sonicwall network. Seems like I have hit a road block so any help would be appreciated. Thanks
Here are some excertps from the config file (10.20.2.0 behind the cisco and 10.20.10.0 behind the sonicwall)
nat (inside) 0 access-list nonat
access-list nonat extended permit ip 10.20.2.0 255.255.255.0 10.20.10.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 10.20.2.0 255.255.255.0 10.20.10.0 255.255.255.0
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer x.x.x.x
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 28800
group-policy SiteToSitePolicy internal
group-policy SiteToSitePolicy attributes
vpn-idle-timeout none
vpn-tunnel-protocol IPSec
split-tunnel-network-list none
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group x.x.x.x general-attributes
default-group-policy SiteToSitePolicy
tunnel-group x.x.x.x ipsec-attributes
pre-shared-key *****
Added few excerpts from config fileYes inspect icmp is enabled in global_policy
The ping requests time out (The only ping that works is when I ping from the remote side to the ASA internal IP address, no other pings from either side work)
#show crypto isakmp sa
1 IKE Peer: x.x.x.x
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
#show crypto ipsec sa
interface: outside
Crypto map tag: outside_map, seq num: 1, local addr: x.x.x.x
access-list outside_2_cryptomap extended permit ip 10.20.2.0 255.255.255.0 10.20.10.0 255.255.255.0
local ident (addr/mask/prot/port): (10.20.2.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (10.20.10.0/255.255.255.0/0/0)
current_peer: y.y.y.y
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 39543, #pkts decrypt: 39543, #pkts verify: 39543
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: x.x.x.x, remote crypto endpt.: y.y.y.y
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 0ED0F897
current inbound spi : 596CCE6F
inbound esp sas:
spi: 0x596CCE6F (1500302959)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 50327552, crypto-map: outside_map
sa timing: remaining key lifetime (sec): 7440
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x0ED0F897 (248576151)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 50327552, crypto-map: outside_map
sa timing: remaining key lifetime (sec): 7440
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001 -
Cisco ASA 5510 site to site VPN only
Hi,
Need some expert help. I will be deploying the CISCO ASA 5510 in VPN site to site scenario only. One interface will be for the WAN and the other LAN interface is connected to another firewall appliance. The main purpose of the ASA is for branch site VPN connection only. My default gateway is pointing to the Internet router on my WAN inteface. Should NAT be enabled on my WAN inteface? The only expected traffic to go thru my ASA is VPN traffic to the other site. I have already defined static routes and have gone thru the wizard for site to site VPN and added my local and remote networks. Also how do I approach my access policies, the default deny any any is in place. Should I allow anything on it? The firewall connected to my LAN interface is expected to do the filtering, like I said the ASA's purpose is just to do VPN site to site. Thanks allThanks Jon. That is what I want to clarify as well, running the VPN site to site wizard, will automatically create the 'cryptomap' access rules, will the existing deny all rule apply to the VPN traffic? I think there was an option that VPN traffic will bypass access rules.
So having NAT enabled for anything that goes out on My WAN inteface would not matter at all, even if the VPN traffic will go out of that interface right? Hope I don't sound confusing.
As per your second question, I know it sounds weird and is not good network design, but customer just renewed maintenance contract for the other firewall box that is why he does not want to get rid of it yet. Although ISA can perform the function as well. Thanks. -
How to configure QOS on certain IP in the Cisco ASA 5510
Hi,
I am need to configure QOS on certain IP in the Cisco ASA 5510. Assume the IP's are 10.0.1.5 , 10.0.1.6 , 10.0.1.7. Here i have to configure 512 KBPS for 10.0.1.5 and 2 MBPS for 10.0.1.6 and 10.0.1.7
Can this done on a ASA 5510 series? if yes can you help me how ?
Regards,
VenkatYes you can do it.You can match the ip addresses in an access-list, put in a class-map and the class-map in a policy map that will do policing.
Good examples for what you want to do are here https://supportforums.cisco.com/docs/DOC-1230
I hope it helps.
PK -
%ASA-7-710005: TCP request discarded error in Client to Site VPN in CISCO ASA 5510
Hi Friends,
I'm trying to built client to site VPN in CISCO ASA 5510 8.4(4) and getting below error while connecting cisco VPN client software. Also, I'm getting below log in ASA. Please help me to reslove.
Error in CISCO VPN Client Software:
Secure VPN Connection Terminated locally by the client.
Reason : 414 : Failed to establish a TCP connection.
Error in CISCO ASA 5510
%ASA-7-710005: TCP request discarded from <Public IP> /49276 to outside:<Outside Interface IP of my ASA> /10000
ASA Configuration:
XYZ# sh run
: Saved
ASA Version 8.4(4)
hostname XYZ
domain-name XYZ
enable password 3uLkVc9JwRA1/OXb level 3 encrypted
enable password R/x90UjisGVJVlh2 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
nameif outside_rim
security-level 0
ip address 1.1.1.1 255.255.255.252
interface Ethernet0/1
duplex full
nameif XYZ_DMZ
security-level 50
ip address 172.1.1.1 255.255.255.248
interface Ethernet0/2
speed 100
duplex full
nameif outside
security-level 0
ip address 2.2.2.2 255.255.255.252
interface Ethernet0/3
speed 100
duplex full
nameif inside
security-level 100
ip address 3.3.3.3 255.255.255.224
interface Management0/0
shutdown
no nameif
no security-level
no ip address
boot system disk0:/asa844-k8.bin
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server xx.xx.xx.xx
name-server xx.xx.xx.xx
name-server xx.xx.xx.xx
name-server xx.xx.xx.xx
domain-name XYZ
object network obj-172.17.10.3
host 172.17.10.3
object network obj-10.1.134.0
subnet 10.1.134.0 255.255.255.0
object network obj-208.75.237.0
subnet 208.75.237.0 255.255.255.0
object network obj-10.7.0.0
subnet 10.7.0.0 255.255.0.0
object network obj-172.17.2.0
subnet 172.17.2.0 255.255.255.0
object network obj-172.17.3.0
subnet 172.17.3.0 255.255.255.0
object network obj-172.19.2.0
subnet 172.19.2.0 255.255.255.0
object network obj-172.19.3.0
subnet 172.19.3.0 255.255.255.0
object network obj-172.19.7.0
subnet 172.19.7.0 255.255.255.0
object network obj-10.1.0.0
subnet 10.1.0.0 255.255.0.0
object network obj-10.2.0.0
subnet 10.2.0.0 255.255.0.0
object network obj-10.3.0.0
subnet 10.3.0.0 255.255.0.0
object network obj-10.4.0.0
subnet 10.4.0.0 255.255.0.0
object network obj-10.6.0.0
subnet 10.6.0.0 255.255.0.0
object network obj-10.9.0.0
subnet 10.9.0.0 255.255.0.0
object network obj-10.11.0.0
subnet 10.11.0.0 255.255.0.0
object network obj-10.12.0.0
subnet 10.12.0.0 255.255.0.0
object network obj-172.19.1.0
subnet 172.19.1.0 255.255.255.0
object network obj-172.21.2.0
subnet 172.21.2.0 255.255.255.0
object network obj-172.16.2.0
subnet 172.16.2.0 255.255.255.0
object network obj-10.19.130.201
host 10.19.130.201
object network obj-172.30.2.0
subnet 172.30.2.0 255.255.255.0
object network obj-172.30.3.0
subnet 172.30.3.0 255.255.255.0
object network obj-172.30.7.0
subnet 172.30.7.0 255.255.255.0
object network obj-10.10.1.0
subnet 10.10.1.0 255.255.255.0
object network obj-10.19.130.0
subnet 10.19.130.0 255.255.255.0
object network obj-XXXXXXXX
host XXXXXXXX
object network obj-145.248.194.0
subnet 145.248.194.0 255.255.255.0
object network obj-10.1.134.100
host 10.1.134.100
object network obj-10.9.124.100
host 10.9.124.100
object network obj-10.1.134.101
host 10.1.134.101
object network obj-10.9.124.101
host 10.9.124.101
object network obj-10.1.134.102
host 10.1.134.102
object network obj-10.9.124.102
host 10.9.124.102
object network obj-115.111.99.133
host 115.111.99.133
object network obj-10.8.108.0
subnet 10.8.108.0 255.255.255.0
object network obj-115.111.99.129
host 115.111.99.129
object network obj-195.254.159.133
host 195.254.159.133
object network obj-195.254.158.136
host 195.254.158.136
object network obj-209.164.192.0
subnet 209.164.192.0 255.255.224.0
object network obj-209.164.208.19
host 209.164.208.19
object network obj-209.164.192.126
host 209.164.192.126
object network obj-10.8.100.128
subnet 10.8.100.128 255.255.255.128
object network obj-115.111.99.130
host 115.111.99.130
object network obj-10.10.0.0
subnet 10.10.0.0 255.255.0.0
object network obj-115.111.99.132
host 115.111.99.132
object network obj-10.10.1.45
host 10.10.1.45
object network obj-10.99.132.0
subnet 10.99.132.0 255.255.255.0
object-group network Serversubnet
network-object 10.10.1.0 255.255.255.0
network-object 10.10.5.0 255.255.255.192
object-group network XYZ_destinations
network-object 10.1.0.0 255.255.0.0
network-object 10.2.0.0 255.255.0.0
network-object 10.3.0.0 255.255.0.0
network-object 10.4.0.0 255.255.0.0
network-object 10.6.0.0 255.255.0.0
network-object 10.7.0.0 255.255.0.0
network-object 10.11.0.0 255.255.0.0
network-object 10.12.0.0 255.255.0.0
network-object 172.19.1.0 255.255.255.0
network-object 172.19.2.0 255.255.255.0
network-object 172.19.3.0 255.255.255.0
network-object 172.19.7.0 255.255.255.0
network-object 172.17.2.0 255.255.255.0
network-object 172.17.3.0 255.255.255.0
network-object 172.16.2.0 255.255.255.0
network-object 172.16.3.0 255.255.255.0
network-object host 10.50.2.206
object-group network XYZ_us_admin
network-object 10.3.1.245 255.255.255.255
network-object 10.5.33.7 255.255.255.255
network-object 10.211.5.7 255.255.255.255
network-object 10.3.33.7 255.255.255.255
network-object 10.211.3.7 255.255.255.255
object-group network XYZ_blr_networkdevices
network-object 10.200.10.0 255.255.255.0
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 145.248.194.0 255.255.255.0
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 host 172.16.2.21
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 host 172.16.2.22
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 host XXXXXXXX
access-list XYZ_PAT extended permit ip 10.19.130.0 255.255.255.0 any
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 195.254.159.133
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 195.254.158.136
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 any
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 209.164.192.0 255.255.224.0
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 209.164.208.19
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 209.164.192.126
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.7.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.17.2.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.17.3.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.2.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.3.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.7.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.1.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.3.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.4.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.6.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.9.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.11.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.12.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.1.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.21.2.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.16.2.0 255.255.255.0
access-list nonat extended permit ip host 10.19.130.201 172.30.2.0 255.255.255.0
access-list nonat extended permit ip host 10.19.130.201 172.30.3.0 255.255.255.0
access-list nonat extended permit ip host 10.19.130.201 172.30.7.0 255.255.255.0
access-list nonat extended permit ip object-group Serversubnet object-group XYZ_destinations
access-list nonat extended permit ip 10.10.1.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list nonat extended permit ip 10.19.130.0 255.255.255.0 host XXXXXXXX
access-list nonat extended permit ip 10.19.130.0 255.255.255.0 145.248.194.0 255.255.255.0
access-list Guest_PAT extended permit ip 10.8.108.0 255.255.255.0 any
access-list Cacib extended permit ip 10.8.100.128 255.255.255.128 145.248.194.0 255.255.255.0
access-list Cacib_PAT extended permit ip 10.8.100.128 255.255.255.128 any
access-list New_Edge extended permit ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
access-list XYZ_global extended permit ip 10.7.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.7.0.0 255.255.0.0
access-list XYZ_global extended permit ip 172.17.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.17.3.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.3.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.7.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.2.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.3.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.4.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.6.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.9.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.11.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.12.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.1.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.21.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.17.2.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.17.3.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.2.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.3.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.7.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.1.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.3.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.4.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.6.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.9.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.11.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.12.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.1.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.21.2.0 255.255.255.0
access-list XYZ_global extended permit ip 172.16.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.16.2.0 255.255.255.0
access-list XYZ_global extended permit ip 172.30.2.0 255.255.255.0 host 10.19.130.201
access-list XYZ_global extended permit ip host 10.19.130.201 172.30.2.0 255.255.255.0
access-list XYZ_global extended permit ip 172.30.3.0 255.255.255.0 host 10.19.130.201
access-list XYZ_global extended permit ip host 10.19.130.201 172.30.3.0 255.255.255.0
access-list XYZ_global extended permit ip 172.30.7.0 255.255.255.0 host 10.19.130.201
access-list XYZ_global extended permit ip host 10.19.130.201 172.30.7.0 255.255.255.0
access-list XYZ_global extended permit ip object-group Serversubnet object-group XYZ_destinations
access-list XYZ_global extended permit ip object-group XYZ_destinations object-group Serversubnet
access-list ML_VPN extended permit ip host 115.111.99.129 209.164.192.0 255.255.224.0
access-list ML_VPN extended permit ip host 115.111.99.129 host 209.164.208.19
access-list ML_VPN extended permit ip host 115.111.99.129 host 209.164.192.126
access-list Da_VPN extended permit ip host 10.9.124.100 host 10.125.81.88
access-list Da_VPN extended permit ip host 10.9.124.101 host 10.125.81.88
access-list Da_VPN extended permit ip host 10.9.124.102 host 10.125.81.88
access-list Da_VPN extended permit ip host 10.9.124.100 10.125.81.0 255.255.255.0
access-list Da_VPN extended permit ip host 10.9.124.101 10.125.81.0 255.255.255.0
access-list Da_VPN extended permit ip host 10.9.124.102 10.125.81.0 255.255.255.0
access-list Sr_PAT extended permit ip 10.10.0.0 255.255.0.0 any
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 10.125.80.64 255.255.255.192
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 10.125.64.0 255.255.240.0
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 host 10.125.85.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 host 10.125.86.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 10.125.80.64 255.255.255.192
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 10.125.64.0 255.255.240.0
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 host 10.125.85.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 host 10.125.86.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 10.125.80.64 255.255.255.192
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 10.125.64.0 255.255.240.0
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 host 10.125.85.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 host 10.125.86.46
access-list XYZ_reliance extended permit ip 10.19.130.0 255.255.255.0 145.248.194.0 255.255.255.0
access-list coextended permit ip host 2.2.2.2 host XXXXXXXX
access-list coextended permit ip host XXXXXXXXhost 2.2.2.2
access-list ci extended permit ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
access-list ci extended permit ip 208.75.237.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list acl-outside extended permit ip host 57.66.81.159 host 172.17.10.3
access-list acl-outside extended permit ip host 80.169.223.179 host 172.17.10.3
access-list acl-outside extended permit ip any host 172.17.10.3
access-list acl-outside extended permit tcp any host 10.10.1.45 eq https
access-list acl-outside extended permit tcp any any eq 10000
access-list acl-outside extended deny ip any any log
pager lines 10
logging enable
logging buffered debugging
mtu outside_rim 1500
mtu XYZ_DMZ 1500
mtu outside 1500
mtu inside 1500
ip local pool XYZ_c2s_vpn_pool 172.30.10.51-172.30.10.254
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside
no asdm history enable
arp timeout 14400
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-208.75.237.0 obj-208.75.237.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.7.0.0 obj-10.7.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.17.2.0 obj-172.17.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.17.3.0 obj-172.17.3.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.2.0 obj-172.19.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.3.0 obj-172.19.3.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.7.0 obj-172.19.7.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.1.0.0 obj-10.1.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.2.0.0 obj-10.2.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.3.0.0 obj-10.3.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.4.0.0 obj-10.4.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.6.0.0 obj-10.6.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.9.0.0 obj-10.9.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.11.0.0 obj-10.11.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.12.0.0 obj-10.12.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.1.0 obj-172.19.1.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.21.2.0 obj-172.21.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.16.2.0 obj-172.16.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.201 obj-10.19.130.201 destination static obj-172.30.2.0 obj-172.30.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.201 obj-10.19.130.201 destination static obj-172.30.3.0 obj-172.30.3.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.201 obj-10.19.130.201 destination static obj-172.30.7.0 obj-172.30.7.0 no-proxy-arp route-lookup
nat (inside,any) source static Serversubnet Serversubnet destination static XYZ_destinations XYZ_destinations no-proxy-arp route-lookup
nat (inside,any) source static obj-10.10.1.0 obj-10.10.1.0 destination static obj-10.2.0.0 obj-10.2.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.0 obj-10.19.130.0 destination static obj-XXXXXXXX obj-XXXXXXXX no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.0 obj-10.19.130.0 destination static obj-145.248.194.0 obj-145.248.194.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-10.1.134.100 obj-10.9.124.100
nat (inside,outside) source static obj-10.1.134.101 obj-10.9.124.101
nat (inside,outside) source static obj-10.1.134.102 obj-10.9.124.102
nat (inside,outside) source dynamic obj-10.8.108.0 interface
nat (inside,outside) source dynamic obj-10.19.130.0 obj-115.111.99.129
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-195.254.159.133 obj-195.254.159.133
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-195.254.158.136 obj-195.254.158.136
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-209.164.192.0 obj-209.164.192.0
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-209.164.208.19 obj-209.164.208.19
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-209.164.192.126 obj-209.164.192.126
nat (inside,outside) source dynamic obj-10.8.100.128 obj-115.111.99.130
nat (inside,outside) source dynamic obj-10.10.0.0 obj-115.111.99.132
nat (inside,outside) source static obj-10.10.1.45 obj-115.111.99.133
nat (inside,outside) source dynamic obj-10.99.132.0 obj-115.111.99.129
object network obj-172.17.10.3
nat (XYZ_DMZ,outside) static 115.111.99.134
access-group acl-outside in interface outside
route outside 0.0.0.0 0.0.0.0 115.111.23.129 1
route outside 0.0.0.0 0.0.0.0 115.254.127.130 10
route inside 10.10.0.0 255.255.0.0 10.8.100.1 1
route inside 10.10.1.0 255.255.255.0 10.8.100.1 1
route inside 10.10.5.0 255.255.255.192 10.8.100.1 1
route inside 10.8.100.128 255.255.255.128 10.8.100.1 1
route inside 10.8.108.0 255.255.255.0 10.8.100.1 1
route inside 10.19.130.0 255.255.255.0 10.8.100.1 1
route inside 10.99.4.0 255.255.255.0 10.99.130.254 1
route inside 10.99.132.0 255.255.255.0 10.8.100.1 1
route inside 10.1.134.0 255.255.255.0 10.8.100.1 1
route outside 208.75.237.0 255.255.255.0 115.111.23.129 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set vpn2 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn6 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set vpn5 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn7 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set vpn4 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn1 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn_reliance esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set c2s_vpn esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 86400
crypto dynamic-map dyn1 1 set ikev1 transform-set c2s_vpn
crypto dynamic-map dyn1 1 set reverse-route
crypto map vpn 1 match address XYZ
crypto map vpn 1 set peer XYZ Peer IP
crypto map vpn 1 set ikev1 transform-set vpn1
crypto map vpn 1 set security-association lifetime seconds 3600
crypto map vpn 1 set security-association lifetime kilobytes 4608000
crypto map vpn 2 match address NE
crypto map vpn 2 set peer NE_Peer IP
crypto map vpn 2 set ikev1 transform-set vpn2
crypto map vpn 2 set security-association lifetime seconds 3600
crypto map vpn 2 set security-association lifetime kilobytes 4608000
crypto map vpn 4 match address ML_VPN
crypto map vpn 4 set pfs
crypto map vpn 4 set peer ML_Peer IP
crypto map vpn 4 set ikev1 transform-set vpn4
crypto map vpn 4 set security-association lifetime seconds 3600
crypto map vpn 4 set security-association lifetime kilobytes 4608000
crypto map vpn 5 match address XYZ_global
crypto map vpn 5 set peer XYZ_globa_Peer IP
crypto map vpn 5 set ikev1 transform-set vpn5
crypto map vpn 5 set security-association lifetime seconds 3600
crypto map vpn 5 set security-association lifetime kilobytes 4608000
crypto map vpn 6 match address Da_VPN
crypto map vpn 6 set peer Da_VPN_Peer IP
crypto map vpn 6 set ikev1 transform-set vpn6
crypto map vpn 6 set security-association lifetime seconds 3600
crypto map vpn 6 set security-association lifetime kilobytes 4608000
crypto map vpn 7 match address Da_Pd_VPN
crypto map vpn 7 set peer Da_Pd_VPN_Peer IP
crypto map vpn 7 set ikev1 transform-set vpn6
crypto map vpn 7 set security-association lifetime seconds 3600
crypto map vpn 7 set security-association lifetime kilobytes 4608000
crypto map vpn interface outside
crypto map vpn_reliance 1 match address XYZ_rim
crypto map vpn_reliance 1 set peer XYZ_rim_Peer IP
crypto map vpn_reliance 1 set ikev1 transform-set vpn_reliance
crypto map vpn_reliance 1 set security-association lifetime seconds 3600
crypto map vpn_reliance 1 set security-association lifetime kilobytes 4608000
crypto map vpn_reliance interface outside_rim
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto isakmp identity address
no crypto isakmp nat-traversal
crypto ikev1 enable outside_rim
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 28800
crypto ikev1 policy 2
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto ikev1 policy 4
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 28000
crypto ikev1 policy 5
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.8.100.0 255.255.255.224 inside
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
no threat-detection basic-threat
no threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy XYZ_c2s_vpn internal
username testadmin password oFJjANE3QKoA206w encrypted
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXXtype ipsec-l2l
tunnel-group XXXXXXXXipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XYZ_c2s_vpn type remote-access
tunnel-group XYZ_c2s_vpn general-attributes
address-pool XYZ_c2s_vpn_pool
tunnel-group XYZ_c2s_vpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
inspect ip-options
service-policy global_policy global
privilege show level 3 mode exec command running-config
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command crypto
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:caa7476cd348ed89b95d37d4e3c9e1d8
: end
XYZ#Thanks Javier.
But i have revised the VPN confuration. Below are the latest configs. with this latest configs. I'm getting username & password screen while connecting cisco vpn client software. once we entered the login credential. it shows "security communication channel" then it goes to "not connected" state. Can you help me to fix this.
access-list ACL-RA-SPLIT standard permit host 10.10.1.3
access-list ACL-RA-SPLIT standard permit host 10.10.1.13
access-list ACL-RA-SPLIT standard permit host 10.91.130.201
access-list nonat line 1 extended permit ip host 10.10.1.3 172.30.10.0 255.255.255.0
access-list nonat line 2 extended permit ip host 10.10.1.13 172.30.10.0 255.255.255.0
access-list nonat line 3 extended permit ip host 10.91.130.201 172.30.10.0 255.255.255.0
ip local pool CO-C2S-VPOOL 172.30.10.51-172.30.10.254 mask 255.255.255.0
group-policy CO-C2S internal
group-policy CO-C2S attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list vlauel ACL-RA-SPLIT
dns-server value 10.10.1.3
tunnel-group TUN-RA-SPLIT type remote-access
tunnel-group TUN-RA-SPLIT general-attributes
default-group-policy CO-C2S
address-pool CO-C2S-VPOOL
tunnel-group TUN-RA-SPLIT ipsec-attributes
pre-shared-key sekretk3y
username ra-user1 password passw0rd1 priv 1
group-policy CO-C2S internal
group-policy CO-C2S attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list vlauel ACL-RA-SPLIT
dns-server value 10.10.1.3
tunnel-group TUN-RA-SPLIT type remote-access
tunnel-group TUN-RA-SPLIT general-attributes
default-group-policy CO-C2S
address-pool CO-C2S-VPOOL
tunnel-group TUN-RA-SPLIT ipsec-attributes
pre-shared-key *********
username ******* password ******** priv 1
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
crypto dynamic-map dynmap 10 set transform-set 3DES
crypto map Outside_Map 500 ipsec-isakmp dynamic dynmap
crypto isakmp identify address
crypto isakmp enable outside
crypto isakmp policy 100
authentication pre-share
encr 3des
hash sha
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
crypto dynamic-map dynmap 10 set transform-set 3DES
crypto map Outside_Map 500 ipsec-isakmp dynamic dynmap
crypto map vpn interface outside
crypto isakmp identify address
crypto isakmp enable outside
crypto isakmp policy 100
authentication pre-share
encr 3des
hash sha
group 1
lifetime 3600 -
Hello !
I m a netword administrator, and i have been looking how to setup web filtering in a network, we are using cisco asa 5510 as a firewall and i have been looking for a way to block url such as facebook and streaming web sites since users are allowed to access to any website and they have been downloding stuff lately and i cant controll the bandwith!!
What u guys recommand !
ThanksHi Neji,
Here you have all the content security options available on the ASA. I think only the CX doesn't apply to your HW but the other options are available.
Block URLs using Regular Experessions (Regex)
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
CSC module:
http://www.cisco.com/en/US/products/ps6823/index.html
How to enable the CSC module:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ssm.html
ASA CX module (ASA 5512,5525,5545,5545,5555)
http://www.cisco.com/en/US/docs/security/asa/quick_start/cx/cx_qsg.html
Scansafe:
http://www.cisco.com/web/about/ac49/ac0/ac1/ac259/scansafe.html
Configuration Cisco Cloud Web Security
http://www.cisco.com/en/US/docs/security/asa/asa90/configuration/guide/protect_cloud_web_security.html#wp1559223
Ironport:
http://www.cisco.com/web/about/ac49/ac0/ac1/ac259/ironport.html
How to integrate the ASA with Ironport (WCCP):
https://supportforums.cisco.com/docs/DOC-12623
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html -
Cisco ASA 5510 Content Security bundle
Hello,
please help me to understand if i buy the Cisco ASA 5510 Content Security bundle for my network found there is 1 yr subscription for the content
security features. what are services included in it. Does URL blocking and filtering includ in this subscription or its a seperate features.
Thanks,
Saroj PradhanHere is the license for CSC module and it lists what is included in Basic and Plus CSC license:
http://www.cisco.com/en/US/docs/security/csc/csc66/administration/guide/csc1.html#wp1045405
One year subscription is providing you the ability to upgrade the virus scan engine, spyware pattern file, anti spam, etc -
Certificate Based Authentication - Questions and Authentication Modules
Hi Everyone
I'm trying to achieve a specific configuration using AM . I've installed the AM Server 7.1 on a AS9.1EE container and have another AS91EE container on another machine that has the agent configured.
The AM server is using a DS rep for configurations and dynamic profiles and using a AD rep for authentication.
What I now need to achieve is authentication base on one of these two way :
- user and password authentication (which is working)
- Certificate based authentication ( working on it )
To configure the Cert. Auth I've started reconfiguring the containers and agent to work in SSL, as said in the manuals. The manuals also say that the containers must have "Client Authentication Enabled", they don't say which ( either the server or agent container or both ) . Also I assume that "Client Authentication Enabled" is refering to the Http Listener configuration of that container.
When I enable it ( the Client Authentication ) on the http listener for either containers the https connection to that container stops working. In Firefox it simply prompts an error saying that the connection was "interrupted while the page was loading." . On IE, it prompts for a Certificate to be sent to the container and when I provide none, then it gives me the same error as Firefox. In both cases no page was presented.
Basically what I need is for both authentication methods described before to work! So, asking the certificate ( specially if it wasn't the AM asking for it ) without giving the user a chance to use a user/password combination isn't what is wanted.
From what I gathered the "Client Authentication" makes this http listener need a certificate to be presented always .
So, my first question is : is the documentation correct? Does this "Client Authentication" thingy need to be enabled at the listener level?
2- I'll probably need to code a costum module for this scenario I'm working in because of client requisits, but if possible I would like to use the provided module. Still, in case I need to make on, has anyone made a cert. auth module that they can provide me with so I have a working base to start with?
3- Is there a tested how-to anywhere on how to configure Cert. Based Authentication?
All for now,
Thank you all for your help
RpHi Rp,
We are using AM 7.1 with Certificate Authentication and LDAP Authentication. To answer your question, yes it is possible to use both method at the same time i.e. Use certificate first and then fallback to LDAP.
First you need to configure AM's webcontainer to accept the certificate. From your message it is clear that you have done that. The only mistake that you did is "made the Client Authentication required". I have done this in Sun WebServer 7.0 and Sun Application Server 7.0 (yeah that is old!!). You need to make the Client Authentication as optional. It means that Certificate will be transferred only when it is available otherwise Web Container will not ask for the Certificate. You will have to search Glassfish website or ASEE 9.1 manual to learn how to make the Client-Authentication Optional. You definitely need this authentication optional as Web Agent will be connecting to this AM and as far as I know they do not have any mechanism to do the Client Authentication.
Secondly, In AM 7.1, you will have to Set up the Authentication chaining. Where you can make Certificate Module as Sufficient and LDAP module as REQUIRED.
Thirdly, if you are using an non ocsp based certificate then change the ocsp checking in AMConfig.properties to false.
Fourth, You may have to write a small custom code to get the profile from your external sources. (if you need to then I can tell you how).
HTH,
Vivek -
Certificate Based Authentication and SSL
To whom it may concern,
I have installed SJES on Solaris 9 x386 (intel version). Everything is running fine, the mails are also coming and going.
Now, I need Certificate based authentication and SSL. I have downloaded versign.com trial certificate and have install it succesfully in the Messaging Server Console -- > Manage Certificates. The certificate is also visible in its tab.
Next, I followed the documentation and enable ssl by using ./configutil utility. And also restarted the server.
I am running my Messenger express (http) like this :
http://testing.xyz.com:8100
(I am using port 8100 for http access to mails). After restarting the mail server, I tried :
https://testing.xyz.com:8100 also,
http://testing.xyz.com:443 also,
https://testing.xyz.com:443 also,
but I cannot see the login page of the mail server. All the above mention url i tried and just given error "the connection was refused when attempting to contact testing.xyz.com. I CAN ONLY SEE THE LOGIN PAGE WHEN I WRITE THE OLD HTTP ADDRESS: i.e. http://testing.xyz.com:8100
And I also checked the logs and the server is having no problem in starting and there is not a single word regarding SSL enabling in the logs.
Please help me out, it's really a strange behaviour. I am using SunONE Messaging Server 6.0.
Thanking you,
Farhan Ahmed,
System Engineer
Dubai, UAE.Dear jay,
I am pasting a line from imap and http logs ... i don't know what this error means and how to resolve it.
[29/Dec/2004:14:42:45 +0100] testing imapd[888]: General Error: SSL initialization error: ASockSSL_Init: couldn't find cert Server-Cert (-8183)
strange thing is that my certificate name is lowercase server-cert and also i can see in the GUI console the certificate name as lowercase and I have also set this parameter encryption.rsa.nssslpersonalityssl = server-cert (all lowercase), but the error in the log tells it as "Server-Cert" !!!! though it is "server-cert"
i got this line from the http log:
[29/Dec/2004:14:42:47 +0100] testing httpd[894]: General Error: SSL initialization error: ASockSSL_Init: couldn't find cert Server-Cert (-8183)
I haven't missed the sslpassword.conf file step. I have placed the same password which i provided while generating the certificate request in the GUI.
Help me out what this errors means and how to resolve them. I have also copied the cert7.db and key3.db to /opt/SUNWms*/config directory from the /var/opt/mps/serverroot/alias
Thanking you,
Farhan Ahmed,
System Engineer,
Dubai Internet City, Dubai, UAE. -
How to Enable IP Accounting or capture packets in Cisco ASA 5510 (8.2)
Hi All,
How to Enable IP Accounting or capture packets in Cisco ASA 5510 (8.2)
Thanks
RoopeshHi Roopesh,
Please go through this document for detailed documentation on captures:
https://supportforums.cisco.com/docs/DOC-17814
Hope that helps.
Thanks,
Varun Rao
Security Team,
Cisco TAC -
SSO Certificate-based authentication problem
Hello,
I have successfully configured certificate-based authentication, and I am able to authenticate with a user certificate that I created with OCA which is stored in the user's profile in OID. Here lies my problem, it seems as if the authentication module (ssomappernickname) only validates against the first certificate stored in the user's profile(userCertificate attribute). This is after I add another certificate to the user's profile. Below is the problem I am describing during my tests:
Order of certificates stored in user's profile.
1. valid cert, invalid cert -> successful authentication
2. invalid cert, valid cert -> unsuccessful authentication (it should STILL be successful here)
Shouldn't the SSO authentication module search each binary certificate in the multi-value attribute for the correct certificate? Or is there some LDAP control that I need to set in order to get this problem solved? Basically, I need to be able let user's perform certificate authentication against multiple certificates in their profiles.For the benefit of anyone finding this, in my case this problem was resolved by reimporting my internal CA's Cert into the ASA.
I suspect I had inadvertently imported an expired CA Cert into the ASA and this rather un-informative error 1838 is trying to tell you this. -
Certificate based authentication for Exchange ActiveSync in Windows 8.* Mail app
I have a Surface Pro and want to setup access to my company's Exchange server that accepts only Exchange ActiveSync certificate-based authentication.
I've installed server certificates to trusted pool and my certificate as personal.
Then I can connect thru Internet Explorer, but this is not comfortable to use.
I don't have a password because of security politics of our company. When I'm setting up this account on my Android phone I'm using any digit for password and it works perfectly.
Can someone help to setup Windows 8 metro-style Mail application? Does it supports this type of auth? When I'm trying to add account with type Outlook, entering server name, domain name, username, 1 as a password then I've got a message like "Can't
connect. Check your settings."
Is there any plans to implement this feature?For what it's worth we have CBA working with Windows 8.1 Pro. In our case we have a MobileIron Sentry server acting as an ActiveSync reverse-proxy, so it verifies the client cert then uses Kerberos Constrained Delegation back to the Exchange CAS, however
it should work exactly the same to the Exchange server directly. I just used the CA to issue a User Certificate, exported the cert, private key and root CA cert, copied to the WinPro8.1 device and into the Personal Store. Configured the Mail app
to point at the ActiveSync gateway, Mail asked if I would like to allow it access the certificate (it chose it automatically) and mail synced down immediately...
So it definitely works with Windows Pro 8.1.
Maybe you are looking for
-
Why doesn't the 'Reanalyze' button work?
After accidentally syncing both the Upright Mode and the Upright Transforms (instead of just the mode) from 1 photo to approximately 200 other photos, I noticed something quite strange. When selecting the 'Auto' upright mode on any of the other pictu
-
Hi Guys, I have designed few forms recently and i am fairly new to livecyle, I have actually 2 issues, bit odd and i have tried to be as much discriptive as i can. email submit button on all my forms works but it sends email to one perticular address
-
How do I stop Pages automating things?
The biggest problem I have is Pages automatically doing things I don't want it to do. For instance: I start a new table and the top two boxes are coloured grey. I try and use the = symbol in a box, and it turns it into a calculation. I use bold in a
-
[10.2.2] I've inherited a database that has about 500 groups within one policy. I'm told there is a potential for it to continue to grow at a rate of maybe 10 per year. Are there any limitations on the maximum number of groups, categories, etc for la
-
Sync scenario -- will it work?
I have a Palm T3, two Macs at home (iMac and Powerbook laptop) and a PC at work. I purchased The Missing Sync this weekend in hopes of being able to regularly perform the following simple tasks: * Sync only three out of five categories in T3's Contac