Ntpdate - no server suitable for synchronization found

Hi,
I am running Solaris 8; ntpdate 3-5.93e.
Running:
ntpdate -u -d server01
19 Jun 11:01:22 ntpdate[24907]: ntpdate 3-5.93e Mon Sep 20 15:45:30 PDT 1999 (1)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
server 172.25.12.5, port 123
stratum 0, precision 0, leap 00, trust 000
refid [0.0.0.0], delay 0.00000, dispersion 64.00000
transmitted 4, in filter 4
reference time: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000
originate timestamp: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000
transmit timestamp: c84164f5.3870e000 Mon, Jun 19 2006 11:01:25.220
filter delay: 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000
filter offset: 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000
delay 0.00000, dispersion 64.00000
offset 0.000000
19 Jun 11:01:26 ntpdate[24907]: no server suitable for synchronization found
Number of Interupted System Call - Err#4 EINTR error messages in truss report. when receiving SIGALRM #14 ( Generated by clock when alarm expires)
Any idea?
Thanks

Thanks Darren,
* The remote machine (server01) isn't running an NTP server
ps -eaf | grep ntp
root 13451 1 0 Jun 16 ? 0:03 /usr/lib/inet/xntpd
I checked and server01 is acting as the ntp server, comunicating and replying to client's requests:
snoop port 123
Using device /dev/bge0 (promiscuous mode)
client01 -> server01 NTP client (Tue Jun 20 08:14:53 2006)
serfver01 -> client01 NTP server (Tue Jun 20 08:14:16 2006)
server01 -> time.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
server01 -> time1.chu.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
client02 -> server01 NTP client (Tue Jun 20 08:16:19 2000)
server01 -> client02 NTP server (Tue Jun 20 08:14:24 2006)
* The remote machine is restricted and will not serve time to you
I am not sure what do you mean by remote machine (cleint or server machine); but they are all on the inside network and I am not aware of any kind restrictions?
* A firewall or other policy is intentionally dropping the packets
This might be true and an issue for server01 talking out to the Internet NTPserver
server01 -> time.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
server01 -> time1.chu.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
As you see **No response from the Internet Servers**;
Running ntpq -p on client01:
ntpq -p server01
remote refid st t when poll reach delay offset disp
======================================================== ntp.mcast.net 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
time.nrc.ca 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
time1.chu.nrc.c 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
Stratum for all of Internet NTP server is 16 which I don't think is good?
Temporary solution to set up server01 to be LOCAL, so that it can advertise itself as a server for ntpdate command, because it appears to act as a server for xntpd on the client side since it talks to clients.
* One or the other machine has a network problem dropping traffic
If you mean hardware problem, I checked log file no traces of loged problems.
Thanks

Similar Messages

  • NTP "no server suitable" error

    I'm having trouble getting ntp to work. When I run the following code:
    $ sudo ntpdate 0.us.pool.ntp.org 1.us.pool.ntp.org 2.us.pool.ntp.org
    6 May 13:51:00 ntpdate[7736]: no server suitable for synchronization found
    No matter what I try I get that response. I think my problem might have to do with the fact that I'm stuck behind an http proxy. Is there a way I can see if the proxy is the problem? Are there any fixes if it is?

    Try 'ntpdate -d <server>' and 'ntpdate -d -u <server>'. You'll get feedback on screen if it gets UDP packets back.
    You can't use a 'telnet'-like trick with UDP. With telnet, the system actually creates a TCP connection before feeding the data streams back to the application. So the fact that you get a connection gives you confidence that something is on the other end, and the network is passing packets. With UDP there is no connection, so you don't have similar confidence. You cannot know things are working unless data comes back.
    Darren

  • No suitable settlement rule found for object

    Dear all,
    i have a production order which initially does not have the settlement rule and this causes it to appear in my WIP report even though it has been closed. I tried inserting the settlement rule in the production order, calculating the variance and posting of the settlement but an error msg of
    "No suitable settlement rule found for object......" appears while doing the variance calculation. Any suggestions on how can i resolve this issue.
    Thanks in advance 1st.
    Regards
    YM

    Hi,
    check what the setting for KV206 is in the user defined messages (TA OPR4_KKS1). If it is set to ' E ' try setting it to ' * '.
    Regards
    Karl

  • Which oracle software is suitable for Microsoft windows server 2003

    Hi,
    I'm suppose to install oracle 9i,10g on the system which i mentioned below.
    Which oracle software is suitable for the system?
    System:
    Microsoft Windows Server 2003 R2
    Standard x64 Edition
    Service Pack 2
    Computer:
    Intel(R) Xenon CPU
    E5335 @ 2.00Ghz
    2.00Ghz, 2.00Gb of RAM
    Waiting for your suggestion.
    Thanks, Muhammed.

    Thanks for your quick response.
    As you said v11 can be installed and
    Could you please say about the bit (32 or 64bit)? which oracle binaries i can download
    because my system configuration is server 2003 - 64 is bit xeon process.
    Many Thanks,
    Muhammed

  • Device error -the target device isn't suitable for use. Solution found!?

    Hello everyone,
    I have received the following error many times on my machine for different projects when trying to burn to disk and folders:
    Device error -the target device isn't suitable for use.
    I have multiple hard drives with ~60GB, 40GB and 12GB. I have tried to burn 4.7GB discs and folders and 8.5GB folders.
    I have previously tried nearly ALL 20 troubleshooting items recommended by Adobe and have even changed to Verbatim media. None of these solved the problem.
    What did solve the problem, EVERY SINGLE TIME, was freeing up hard drive space or reducing the length of the project.
    You may look at the available hard drive space and THINK that you have enough. But you don't.
    Perhaps the remainder of this thread could be used to discuss the disk space requirements for projects. I can't seem to crack the formula. I just keep deleting/archiving files until the project works. I have ordered some new big HDD's to be rid of this error forever.
    Justin.

    While it is certainly possible that diskspace is one factor in getting the dreaded "target device isn't suitable message" (usually after lenghthy processing), it does not appear to be the only one.
    I got the message trying to burn a 3 minute video to a dvd on two seperate computers one running xp pro with 150Gb of spare disk space and one running W7 HP with 50Gb of spare space. Tryng to burn to a folder gave the same error.
    To me, this pointed to something in the app, or the project, so firstly I deleted the disk menu...burn completed ok. Re-instated a menu (different one)....burn failed. Removed one scene marker and the stop marker......burn completed ok. Re-instated stop marker......burn failed
    Am I missing something on the purpose of the stop marker?
    There was nothing obviously wrong with the project, although I will admit that I am new to PRE but am not a complete novice to video editing.
    The encoding process of the menu's (both passes) went ok, and it wasn't until it got to the "encoding media" phase that the error message appeared.
    It would certainly seem that more illuminating error reporting would be beneficial in this case, but it would also seem to be worth trying changes to the menus or markers to see if that fixes the error message.

  • No suitable plugins were found when trying to install plugin for watching video

    When trying to watch videos on my web site (www.ruivilela.com), they won't play. I get a message that a plugin is needed. When I click on Install plugins, I get a message that no suitable plugins were found.
    I really don't know what to do because I cannot even find out which plugin(s) is/are missing... I have uninstalled and re-installed Flash...
    Does anyone know anything about this?
    Thanks!

    That may be mp4 media files that are played by the QuickTime player.
    *https://support.mozilla.org/kb/Popular+plugins

  • No suitable sender agreement found - File / Adapter, Sender FTP

    Hi SDN Friends,
    Is my first time in PI with FTP / FILE ( really I'm newbie in PI - but 2 years in ABAP ).
    I have configurated my communication channel with and FILE/ADAPTER on a Sender FTP...
    I have Tried with 2 FTP, one in my PC, and one Public... but in both cases, it's doesn't works... monitoring my communication channel, I get the No suitable sender agreement found ERROR....
    I thought... may be PI has not access to the FTP's servers, so run in SAP PI server, an ABAP program trx se38, program: RSFTP002 and with this, I could connect to the FTP...  it works perfectly.
    so I don't understand... what I'm doing bad?
    Any Help?
    regards every body!

    u r welcome...2 yrs back i am newbie
    when ever we make changes after an error, sometimes XI will not take the changes in cache automatically; uses old one. solution for this is complete Cache refresh.
    welcome to Integration World have fun....

  • Server Specs for SLES and GW 12

    I need to look into a new server to put SLES and GroupWise 2012 on it. I am having trouble finding server specs for this, so I was hoping to get a little advice. GW will be the only thing on this box, one PO with about 150 users. Hoping to build something or purchase something that isn't too expensive due to budget restraints.
    Thanks

    I work for a small non profit organization and we only have one server, never found the need for virtualized servers.
    >>> magic31<[email protected]> 3/6/2013 1:46 AM >>>
    umchs;2250164 Wrote:
    > I need to look into a new server to put SLES and GroupWise 2012 on it.
    > I am having trouble finding server specs for this, so I was hoping to
    > get a little advice. GW will be the only thing on this box, one PO with
    > about 150 users. Hoping to build something or purchase something that
    > isn't too expensive due to budget restraints.
    >
    > Thanks
    If this is going to be a dedicated physical setup (you are not planning
    to run GroupWise on a virtualised server) you should not need a big
    budget to find a decent server for those 150 users.
    IMO, a dual core CPU with 4 GB of RAM would seem quite sufficient in
    this case. Getting a proper disk controller (with a true hardware raid
    handling if you are looking for a raid setup) & decent disks that can
    handle the I/O required is important too.
    The A brand entry level servers that I've seen easily meat this
    requirement. Do make sure it's suitable for 64bit.
    In any case, GroupWise 2012 has about the same requirements version 8
    would demand.
    I'm curious, you are not already virtualising servers?
    Cheers,
    Willem
    Knowledge Partner (voluntary sysop)
    It ain't anything like Harry Potter.. but you gotta love the magic IT
    can bring to this world
    magic31's Profile: http://forums.novell.com/member.php?userid=2303
    View this thread: http://forums.novell.com/showthread.php?t=464618

  • Content server installations for OLM

    Dear all,
    We are in 11.5.10.2 instance with DB 10.1.0.5 ( upgraded) on multy node HPUX-PA-RISC and Itanium
    We need to install content server in the different m/c. and we are going through the note 351047.1
    In that they mentioned "Install container"
    Is webserver Oracle 9iAS Release 2 will work for OLM content server setup.
    If that is the case Is infrastructure should be installed first?
    Is the Portal and wireless will work for our case?
    what about 9i AS application server installation?
    Kindly give us the detailed installation steps for OLM content server setup.
    and What OS will be best suitable for this?
    Thanks and regards
    Vasu

    Dear all,
    I am having some doubts in the doc: 374677.1 Utilising content server with Oracle Learning management.
    Let us take our existing oracle application as "APPS server" and content server install on windows is "CONTENT server"
    (1) Install the container, such as Apache and ApacheJserv.
    Ans: CONTENT server
    (2) Create a servlet repository called servlets. For example, in Jserv, the servlets
    repository exists by default.
    Ans: CONTENT server
    (3) Copy the following files to your servlet repository directory:
    $JAVA_TOP/oracle/apps/ota/admin/common/util/ContentServerServlet.class
    $JAVA_TOP/oracle/apps/ota/admin/common/util/ProtocolConstants.class
    $JAVA_TOP/oracle/apps/ota/admin/common/util/SystemUtils.class
    $JAVA_TOP/oracle/apps/ota/admin/common/util/SystemUtils$JarUtility.class
    $JAVA_TOP/oracle/apps/ota/admin/common/util/ContentServeerClientData.class
    Note:
    The file location depends on the variable $JAVA_TOP.
    If the application is running successfully then these files should definitely exist there
    Make sure that the ENTIRE directory structure is copied over to the servlet repository directory.
    So if the servlet repository directory is:
    $ORACLE_HOME/Apache/Jserv/servlets
    then the destination of these classes are as follows:
    $ORACLE_HOME/Apache/Jserv/servlets/oracle/apps/ota/admin/common/util/ContentServerServlet.class
    $ORACLE_HOME/Apache/Jserv/servlets/oracle/apps/ota/admin/common/util/ProtocolConstants.class
    etc
    Ans: APPS server to CONTENT server. how top copy entire directory structure
    is we need to create directory like "oracle/apps/ota/admin/common/util"
    (4) Also ensure the oracle.apps.fnd.common.VersionInfo.class file is located
    under the class path directory that is defined for the repository.
    Note:
    This file should be found under $JAVA_TOP as follows:
    $JAVA_TOP/oracle/apps/fnd/common/VersionInfo.class
    Again, the entire directory structure needs to be copied, for example.:
    $ORACLE_HOME/Apache/Jserv/servlets/oracle/apps/fnd/common/VersionInfo.class
    Ans: from APPS server to CONTENT server
    ==========================================
    (5) In zone.properties, add the following: (????? which zone properties
    APPS server or CONTENT server?????????
    # ----- OLM Content server ----- # servlet.OtaContentServerServlet.code=oracle.apps.ota.admin.common.util.ContentServerServlet
    servlet.OtaProtocolConstants.code=oracle.apps.ota.admin.common.util.ProtocolConstantsservlet.OtaSystemUtils.code=oracle.apps.ota.admin.common.util.SystemUtils
    servlet.OtaSystemUtils$JarUtility.code=oracle.apps.ota.admin.common.util.SystemUtils$JarUtilityservlet.OtaContentServerClientData.code=oracle.apps.ota.admin.common.util.ContentServerClientData
    #----- END OLM
    Note:
    The zone.properties file location can vary depending on the implementation, usually in the apache server.
    Ask the admin who set up the apache server, or look under the apache server setup.
    (6) Create an alias for the directory where the content will be stored. For example, in Apache, to create an alias for the physical directory
    Ans: CONTENT server
    D:/apache/rootdir/, add the following inside the httpd.conf file:
    Alias /content/ ’D:/apache/rootdir/’
    (7) Add the list of middle tiers and the temporary file location as arguments to the Java Interpreter. For example, in Jserv, add following lines inside the jserv.properties file:
    Ans : CONTENT server.
    wrapper.bin.parameters=-Dmiddletier=148.87.19.51+148.87.19.50+144.25.78.202+10.10.20.140wrapper.bin.parameters=-DTemp=D:\temp
    wrapper.bin.parameters=-Djava.io.tmpdir=/dbfiles/applcsf/log
    Here the numbers, such as 148.87.19.51 and 148.87.19.50, are IP addresses of all trusted middle tiers, and + is the separator for multiple addresses.
    Servers not specified in the list are not able to access the servlet.
    D:\temp is the absolute path of the temp location where files are saved temporarily while handling physical content.
    /dbfiles/applcsf/log is any existing directory for log files.
    Pl go through the above and clear my doubt. ( about which server we need to do the task).
    1. CONTENT server.
    2. CONTENT server.
    3. from APPS server to CONTENT server.
    4. from APPS server to CONTENT server.
    5. ????? which server CONTENT server or APPS server??????? if it is a APPS server under which directory the zone.property file will locate.
    6. CONTENT server.
    7. CONTENT server.
    Kindly suggest me.
    Regards
    Vasu

  • Server can't be found messages and real slow page loads or failing to load

    I'm getting "server can't be found" messages and pages not loading happening alot lately. I thought it was the latest Firefox I had (1.5.0.2) but it's happening with Safari 2.0.3 as well. I thought it might also be my ISP since the cable modem line that comes in from the street now gets taped for my landlady's house for internet access as well as her tv service. I have had internet using this connection for about 3 years now and she has had tv service since before I moved in but only lately did she start to get internet access as well. I thought perhaps they screwed up something when they connected her to the internet as well. I live in a separate house a little back from the road than she does. (I haven't checked but I would assume there is only one cable feed coming to her house. Mine got split off of hers and then is buried underground til it reaches my house. I want to look at the connections on her house and tighten anything that is loose too.) These slowdowns/can't connects happen when she is not home so we can rule out her using the line causing trouble.
    With all these clues, what do you think it can be? I'm visiting sites I've always visited, not new ones. I let autocomplete pick the URL so the URLs are all from my current bookmarks and are places I go all the time.
    Pages tend to either load right away or they take forever. I'll get some progress on the location bar (with Safari) or the progress bar with Firefox and then after a LONG wait (a minute or so), it will say it can't connect. If this was a car it'd be driving VERY haltingly. Refreshing either does nothing or loads the page instantly.
    What do you think it is? the normal ups and downs of the internet or something wrong with a) my machine/OS or b) my internet connection. One change I've made lately are to use and then reset to default, Tiger Cache Cleaner's Optimize Tune for Broadband (and cache cleaner to troubleshoot a Yahoo IM problem which was solved by deleting all Yahoo IM related files and reinstaling the IM).
    Many thanks.
    John L

    I looked at this thread: http://discussions.apple.com/thread.jspa?threadID=453191&tstart=0 and it suggested I stop Safari from caching. I didn't see any way to do that without using something like what someone suggested elsewhere: Safari Enhancer (3.3). I set Safari Enhancer to Deactivate Cache. I also tried accepting All cookies; I'd had it set to only 'accept only from sites I navigate to'.
    What do you know. My browsing is mostly fantastic! I've never seen a browser act so fast on a Mac. Over the years (since 1997 or so) I've used Netscape, IE, Firefox, Mozilla, iCab, Opera, and others but all were always sluggish (w/ OS 7, 9 and X on a 500 mhz Powerbook Firewire and this machine.). Now, pages mostly load - boom; I don't watch them load as I always did before. I still do get some that hang while the one remaining item out of the total loads but overall it is much better. No 'server can't be found messages' since doing this.
    I am not certain that accepting All cookies has anything to do with this but I am pretty happy with turning the cache off. (I have a cable modem.)
    Maybe this will help others?
    I'll keep posting if anything changes. I do look forward to going back to Firefox, assuming turning the cache off will be the cure there too, since it has the features I like but at least it is encouraging the Safari can be so fast. (And so far has better bookmark management than Firefox's which are horrendous.)
    Cheers,
    John L

  • As a part of my Daily Reporting Activity; i have to send 35 SMS everyday. Can someone suggest me which software is suitable for my usage as it's tedious job to forward the same sms report 35 times. I am using  IPhone 3GS -32 GB. Sincerly req your reply

    As a part of my Daily Reporting Activity; i have to send 35 SMS everyday. Can someone suggest me which software is suitable for my usage as it's tedious job to forward the same sms report 35 times. I am using  IPhone 3GS -32 GB. I am using service of Vodafone, Mumbai. & when i first time sent 35 SMS (having habit of Nokia to send group SMS at the click of one button) my IPhone sent 35 MMS.

    Found something for you that might be useful:
    http://itunes.apple.com/us/app/igroup-sms/id377378452?mt=8

  • Solution for Windows Store app "projectname.exe" does not contain a static 'Main' method suitable for an entry point . Error.

    Hi,
    I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
    error. No other errors were there other than that.
    Error 
    Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
    method suitable for an entry point. 
    C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC    Blog_Reader
    But I found the solution while I fixing it.
    Solution for that is like below.
    Go to your App.Xaml and Right-Click thenGo to Properties
    Check whether the Build Action is
    ApplicationDefinition
    If not change it to ApplicationDefinition.
    Clean the code (solution) and Deploy
    Now the error is fiexed.

    Hi Robana, 
    Good sharing on the Technet. 
    This will definitely benefit other who may encounter the same issue as yours.
    Thanks for your sharing again. 
    Kate Li
    TechNet Community Support

  • Unable to start admin server service for weblogic (startWebLogic.sh) Linux

    I installed ECM 11g on Linux 64-bit , installed weblogic 12
    so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing
    I found solution to give full access permeation for the user , but it's still same issue
    and i am triyng to start services from the users how installed the Weblogic and ECM
    bash-4.1$ '/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/startWebLogic.sh' .
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/jdk1.6.0_33/lib/tools.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/home/ecm/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/ecm/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/xqrl.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
    PATH=/home/ecm/Oracle/Middleware/wlserver_12.1/server/bin:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/lib/jvm/jdk1.6.0_33/jre/bin:/usr/lib/jvm/jdk1.6.0_33/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ecm/bin
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http://hostname:port/console *
    starting weblogic with Java version:
    java version "1.6.0_33"
    Java(TM) SE Runtime Environment (build 1.6.0_33-b04)
    Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
    Starting WLS with line:
    /usr/lib/jvm/jdk1.6.0_33/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.policy -Xverify:none -Djava.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_33/jre/lib/endorsed:/home/ecm/Oracle/Middleware/wlserver_12.1/endorsed -da -Dplatform.home=/home/ecm/Oracle/Middleware/wlserver_12.1 -Dwls.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dweblogic.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dcommon.components.home=/home/ecm/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain -Djrockit.optfile=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dipm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Ducm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/home/ecm/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
    <Sep 12, 2012 12:08:02 PM EEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Sep 12, 2012 12:08:03 PM EEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Sep 12, 2012 12:08:03 PM EEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.8-b03 from Sun Microsystems Inc..>
    <Sep 12, 2012 12:08:04 PM EEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
    WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
    WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
    WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
    WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
    WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
    WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
    WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
    WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
    WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
    WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
    <Sep 12, 2012 12:08:06 PM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320400> <The log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log00009. Log messages will continue to be logged in /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log.>
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <Log Management> <BEA-170019> <The server log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
    Sep 12, 2012 12:08:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
    WARNING: Opening of file based keystore failed.
    <Sep 12, 2012 12:08:09 PM EEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
    <Sep 12, 2012 12:08:09 PM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:148)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
         at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
         Truncated. see log file for complete stacktrace
    >
    <Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
    <Sep 12, 2012 12:08:09 PM EEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
    <Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
    bash-4.1$

    Looks to be a cert or keystore issue. How do you have that setup?

  • Broadcasting Workbook Error | An active RFC server could not be found

    Hi All,
    I am facing an issue while trying to broadcast(distribute) a workbook. The broadcasting of a query from the query designer works fine. But when I try to distribute a workbook, it throws up the following error. We have used the SMTP method(<i>Using SMTP plug-in</i>) for broadcasting and we know that we can use RFC(<i>Using RFC connection</i>) too. But my question is whether RFC method is a must for workbook distribution.Kindly help me.
    Thanking you,
    Best Regards,
    Manesh
    <u><b>The Error Log</b></u>
    <b>Processing for user PUSHM, language EN 
      Processing setting 
      An active RFC server could not be found 
      Error occurred during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD 
      Processing setting !TEMP_2CC00BE0E24C704991039F6E9C2AC4E4 completed with errors 
    Job step for user PUSHM, language EN ended with errors 
    </b>

    Hi,
    Are you using BI 7 ?
    Have you configured a Precalculation server in transaction RSPRECADMIN ?
    Precalculation servers are basically PC, that are used for their Excel capabilities, in order to produce up-to-date workbooks.
    Best regards,
    Guillaume
    Message was edited by:
            Guillaume GARCIA

  • Error in Broadcaster - An Active RFC Server could not be found

    Hi all,
    I am trying to broadcast a workbook to my mailbox through Information Broadcasting, i am trying this in BI 7.0 system.  In the Broadcasting wizard, I gave my mailid & the other required credentials.  But when i click on Schedule, i am getting a Error message "An Active RFC Server could not be found.  Error occured during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD". 
    I checked in SU01 & my mailid is already added there.  So, where am i missing or is there any settings need to be done for the Broadcaster to work?
    Thanks,
    Murali

    The precalc server is not needed if you are generating html output, but certainly is mandatory  for the Broiacaster to run/distribute BEx Excel Workbooks. 
    The BW needs access to a Windows computer that has Excel on it.  The BW connects to the Precacl and sends it a request it run a BEx wkbk, which the BW then can email to users.
    The precalc server is a Windows Service.  You can install it locally on your desktop, or it can be installed on a windows server.  There is a little config that needs to be done.  The How To Troubleshoot Information Broadcasting link in the other resposne will provide all the steps.  You should obtain the most current version of the software from SAP.
    You'll need a precalc server for each BW system in your landscape that you want to broadcast BEx wkbks from, so if you have Dev and QA systems, you'll need precalcs for them as well.

Maybe you are looking for

  • Using UIX with Jdeveloper 10.1.3.2

    Jdeveloper 10.1.2 was released with UIX support built-in. I have been working on 10.1.3.2 for a while and i am required to work on an old application that was build in 10.1.2 using UIX and Struts. How can integrate the UIX enviornment to 10.1.3.2. an

  • IE 9 - can't sign in to ebay (every other site works fine, as before)

    I can't sign in to ebay from my main computer; I can get to the main ebay website (www.ebay.com) and I can get to sign-in page, but when I enter my user ID and password, ebay displays an error page and returns immediately to the sign-in page. The err

  • Switching from PC to MAC -Will I have a problem with Lightroom?

    I am getting ready to switch from a PC to a MAC ( I think).  I know I will need new Lightroom software.  Other than that, will I have any problems.  Will it read my files automatically?  Sepcifically, will it maintain my key words, ratings, metadata,

  • Four iOS Devices on Mac

    I want to set up icloud, but I am a little confused. My wife and I each have an iPhone and Ipad, but only one Mac, what would be the best way to set this up, I would like to share our calendar and adress book. I do have all the devices working using

  • How to create SRT subtitle files?

    Hi. I created some movies in iMovie and published them to iTunes, where they appear as "QuickTime movie files". I want to add subtitles to these movies, and to some m4v movies. I know how to use iSubtitle to add subtitles to a movie, but that is when