Ntttcp doesn't run traffic on first command execution
Hi,
I noticed some weird behavior of ntttcp_x64.exe which sometimes doesn't run any traffic on the first time it's been executed.
Waiting for it to complete, shows that 0.000MB/s were transmitted. (no traffic was actually running)
Re-running right after that with the same command lines, works fine.
Have you ever encountered this behaviour?
I'm using current latest version (5.28) on Win2012R2 release version.
Thanks.
No application errors.
commands:
server: ntttcp_x64.exe -r -a 4 -t 10 -m 16,*,<IP>
client: ntttcp_x64.exe -s -a 4 -t 10 -m 16,*,<same IP as above>
here is a screenshot:
C:\>NTttcp_x64.exe -r -a 4 -t 10 -m 16,*,11.137.90.1
Copyright Version 5.28
Network activity progressing...
Thread Time(s) Throughput(KB/s) Avg B / Compl
====== ======= ================ =============
0 0.000 0.000 0.000
1 0.000 0.000 0.000
2 0.000 0.000 0.000
3 0.000 0.000 0.000
4 0.000 0.000 0.000
5 0.000 0.000 0.000
6 0.000 0.000 0.000
7 0.000 0.000 0.000
8 0.000 0.000 0.000
9 0.000 0.000 0.000
10 0.000 0.000 0.000
11 0.000 0.000 0.000
12 0.000 0.000 0.000
13 0.000 0.000 0.000
14 0.000 0.000 0.000
15 0.000 0.000 0.000
##### Totals: #####
Bytes(MEG) realtime(s) Avg Frame Size Throughput(MB/s)
================ =========== ============== ================
0.000000 10.013 0.000 0.000
Throughput(Buffers/s) Cycles/Byte Buffers
===================== =========== =============
0.000 0.000 0.000
DPCs(count/s) Pkts(num/DPC) Intr(count/s) Pkts(num/intr)
============= ============= =============== ==============
47.738 0.119 1817.238 0.003
Packets Sent Packets Received Retransmits Errors Avg. CPU %
============ ================ =========== ====== ==========
47 57 0 0 0.000
NOTE::Avg CPU% drops below 0% if test duration is too short
Similar Messages
-
Office 2013 GPO Silent install doesn't run consistently
client is all Dell Win 7. Servers are 2012. Project is to install Office 2013 silently with GPO at computer start. Everything is configured correctly and it works on some computers. I set it install in a larger group by linking the GPO to that group of computers. Told everyone to reboot and waited. Nothing. It didn't install. I know it works because I haven't changed it and I have seenit work multiple times. Try another reboot. Nothing. Then one of them works. Then another. Then another. Not all at once and not always at reboot. Some of them just install in the middle of the day. Is this a "load balancing" feature where all of them are not installed at once so the server isn't overwhelmed? If not, why does it work sometimes and then at random times. The actual install doesn't take very long. Maybe my server doesn't have the horsepower...
This topic first appeared in the Spiceworks CommunityI've not tried the Dashboard connection yet.
I will try to connect and setup permissions using TDADM.
This is my thoughts etc. so far;
problem starts when running dpconfig.exe - therefore I can skip re-running (and 'repairing') the install using the MSI
dpconfig doesn't appear to have any command line options? (ran "dpconfig /?" from a command line and still just launched the wizard)
so far, even if permission are or get set correctly, processor hasn't been linked to the share yet - only dpconfig can do that?
had installed the Processor on Server 2012 in Core UI. Thought dpconfig might be trying to launch Explorer, which isn't available in Core, so went up to "Server with GUI" (bypassing "minimal"). However, this didn't change anything. Left at Server with GUI
for now (although would prefer to run as Core if supported - nothing says it isn't?)
by default, our server config blocks all Firewall ports incoming (the out of the box config) only opening up ports as required. I'll try turning the Processor Firewall off.
Seems like not a lot of people do this (install the 2013 Telemetry), as very little online apart from Microsoft pages. Trying to dig through the Powershell script posted (by you Jill?) here;
http://blogs.technet.com/b/office_resource_kit/archive/2012/09/25/quickly-set-up-office-telemetry-dashboard-on-a-workgroup-or-domain-joined-computer.aspx . However, looks like even in this one that for domain joined machines, dpconfig is launched interactively,
so still no cmd line options! -
Real-Time Application doesn't run; source code works fine
The short version is I'm programming a cRIO and apparently the RT code isn't running after being deployed and I can't figure out why. This is further complicated that I'm doing all this remotely and I don't have direct access to the unit since I'm 500 miles away. I'm working through a couple of other guys who know some LabVIEW, but neither works at the site so they have to explicitely travel out there every time I have a bright idea.
I was out there a few weeks ago. During this time I created a simple cRIO code, since I'm new to cRIO, that allowed the user to move a control and change a graph. It worked fine, but I should note it did not have an FPGA component. After that I worked on the real code, which reads some sensors, displays the results on a UI and logs the results. This did have FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could complete a release version and deploy the RT as a compiled application. I sent them the release version later, my contact deployed it but got network stream errors when running the UI.
After hours of looking at network problems and sending over debug versions, I tried creating a log on the RT level so I could see what was going on. The log doesn't even open, even if it's the first command in the code. I pored through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took me in a new direction.
I had my contact use the RT debug console and when he pulls up the RT front panel, it shows a broken run arrow. He clicks it and nothing happens -- no running, no bug list. If he pulls up the bug list manually, it's empty. Again the RT works fine if you run it through LabVIEW and not as a compiled real-time application. He also noticed that the Open FPGA VI was grayed out on the block diagram. No other icons are.
So the problem appears to be that the compiled RT application is getting some kind of error but not telling me what it is, and it seems to be related to opening the FPGA. I've recompiled the FPGA and RT. I've had him recompile the RT himself, but not the FPGA because it would take hours. He's downloading everything correctly to the cRIO. The RT is set to run automatically. He's rebooting the cRIO every time he deploys the RT. They have LabVIEW on a computer there but it doesn't have the right drivers to run the code from the LV environment. I'm resisting having them install the dirvers because downloading big files is complicated there due to security restrictions and a lousy network connection at a remote site. Besides that doesn't solve the problem of the RT executable not running the same as the source code, which according to the thread above appears to be a thing.
The latest thing I'm trying is that I sent him instructions for how to build a source distribution from the project I sent and try deploying that to the cRIO. Even if that works I'm not sure that's an acceptable solution because I assume running the VI rather than the EXE is slower, and they need speed on this project.
I simply have no idea where to go from here. I probably need to get direct acess to the cRIO and I might be able to convince them to ship it to me so I can figure this out, but I'm not sure where I'd even start other than the standard voodoo debugging of "try stuff at random until something works". I'm open to suggestions if anyone has managed to solve this before.
Code snippet of the first part of the project is attached, though I'm not sure how much good it will do. I'm really stumped and the client is getting frustrated with how much of the budget is going to fix this.
Solved!
Go to Solution.
Attachments:
RTMainSnippet.png 623 KBHave you checked the cRIO error log? Usually I'd access it through the LabVIEW project (right-click on the target, don't remember the exact menu options and I don't have the RT toolkit installed on this machine to check), but it must be stored somewhere on the cRIO as well, although I don't know if it's in a human-readable format.
Which cRIO are you using? What exactly do you mean by "debug console"? (This may be related to the cRIO - the newer ones have video out, although I don't know if that's what you're referring to.) With a broken run arrow, you won't get an error list unless you're running in the development environment.
Have you confirmed that the software installed on the cRIO matches the version you're using for development, including patch level? Get someone to connect to the cRIO with Measurement and Automation Explorer, and get a list of the software installed on the cRIO.
Sounds like the ability to connect with a remote debugger would be helpful here, if you can get the right drivers installed on the machine with LabVIEW that's connected to the cRIO. Make sure all driver versions match what you're using. Any chance you could then do a remote desktop connection from your work site to the remote LabVIEW machine? -
Does "Run another program first" affect if the real package will run?
In order to sequence some things, in my package I want to do a "run another program first" before what I'm really trying to do runs.
My problem is that the thing I want to put in RAPF sometimes fails or times out due to some issues with our machines, but I want the "real" package to run regardless of the results of the RAPF package.
My question is, if the thing in RAPF fails or times out, will the original package still run after the failure/timeout?Doesn't look like I'm able to make a new TS, might be a permissions thing I'll check on.
Also, just to give more details, what I'm trying to do is run two command lines, one an msiexec command with switches and then after that runs, then a setup.exe command with switches, then when those finish a vbs which I know finishes. I
think it's either the msiexec or setup.exe one that hangs (possibly asking for a reboot or something that it doesn't really need). -
SCCM 2012 - Problems running vbscript or simple command line
Hey everybody, I'm having a heck of a time trying to get SCCM 2012 to deploy some very simple Vbscripts or even a simple command line. I need to deploy some registry fixes across the company as well as a Vbscript that uninstalls some old applications.
If I run these scripts/commands outside of SCCM everything works fine, inside of SCCM it always shows "succeeded" but it doesn't actually run correct on the client.
What's confusing to me is the use of distribution points when you're running a command line that doesn't actually have any source files. For instance this is what I'm trying to run "regedit /s \\servername\folder\registryfix.reg". I've also tried
a similar bat file as well with the same result. I've tried it with a source folder specified, I've tried it using Run Program From Server or Download locally. I've gone through everything I can think of but can't get it to work.
Similarly with a vbscript I'm trying "cscript.exe /s \\servername\folder\uninstallapps.wsf" and various different settings in the package deployment.
I'm really confused here guys so any help would be greatly appreciated. ThanksWhat I have found is that if you try and run the REG.EXE command line directly, either as a program or via a CMD/BAT file, the 64-bit redirection will occur. So, if you had something like this in a program or via a CMD/BAT file that ran against a 64-bit
system:
REG ADD HKLM\Software\Microsoft\Test /v Test /d Test
You would end up with this registry entry existing under:
HKLM\Software\Wow6432Node\Microsoft\Test
That's because SCCM uses the 32-bit launcher to take care of this and redirection occurs - You can see this via the "CCM32BitLauncher.log" on the client.
To work around this problem, I have done the following:
On a reference machine, create/export the registry entry I want into a *.reg file - An example export of "Test.reg" for the above mentioned registry entry would look something like this:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Test]
"Test"="Test"
2. Stick our "Test.reg" file in a source share, create a package with the share as the source content, and distribute it
3. Create a program for the package with a command line like this:
REG IMPORT Test.reg
This is obviously not as clean as having a command line with a package to distribute, but I find it works fine for me and gets around the redirection for registry entries. -
PLSQL compiles but doesn't run.. I've declared it everywhere but still..
PLSQL compiles but doesn’t run.. I’ve declared it everywhere but still..
Afternoon.. Hopefully a quick one for someone.. I’m trying to run a Concurrent Program in ORACLE Financials using a Data Template derived BI Publisher report.
Error message received..
SUBIXCLT module: UofS Expense Claim Tracking Report
+--------------------------------------------------------------------------
All Parameters: raisedby=:status=:claimant=:expense_date_from=:expense_date_to=:LP_ORDERED_BY=Expense Report Number
Data Template Code: SUBIXCLT
Data Template Application Short Name: PO
Debug Flag: N
{raisedby=, claimant=, expense_date_to=, expense_date_from=, status=, LP_ORDERED_BY=Expense Report Number}
Calling XDO Data Engine...
[060410_025628319][][STATEMENT] Start process Data
[060410_025628324][][STATEMENT] Process Data ...
[060410_025628329][][STATEMENT] Executing data triggers...
[060410_025628329][][STATEMENT] BEGIN
SUBIXCLT.claimant := :claimant ;
SUBIXCLT.expense_date_from := :expense_date_from ;
SUBIXCLT.expense_date_to := :expense_date_to ;
SUBIXCLT.raisedby := :raisedby ;
SUBIXCLT.status := :status ;
SUBIXCLT.lp_ordered_by := :lp_ordered_by ;
:XDO_OUT_PARAMETER := 1;
END;
l_flag Boolean;
BEGIN
l_flag := SUBIXCLT.BEFOREREPORT(L_ORDERED) ;
if (l_flag) then
:XDO_OUT_PARAMETER := 1;
end if;
end;
[060410_025628356][][EXCEPTION] SQLException encounter while executing data trigger....
java.sql.SQLException: ORA-06550: line 4, column 33:
PLS-00201: identifier 'L_ORDERED' must be declared
ORA-06550: line 4, column 1:
PL/SQL: Statement ignoredThe Data Template
The Data Template
<?xml version="1.0" encoding="utf-8" ?>
- <dataTemplate name="UofS_OutstandngExpenses_Report" defaultPackage="SUBIXCLT" dataSourceRef="FINDEV" version="1.0">
- <properties>
<property name="xml_tag_case" value="upper" />
<property name="include_parameters" value="true" />
<property name="debug_mode" value="on" />
</properties>
- <parameters>
<parameter name="claimant" dataType="character" defaultValue="" />
<parameter name="expense_date_from" dataType="date" defaultValue="" />
<parameter name="expense_date_to" dataType="date" defaultValue="" />
<parameter name="raisedby" dataType="character" defaultValue="" />
<parameter name="status" dataType="character" defaultValue="" />
<parameter name="lp_ordered_by" dataType="character" defaultValue="" />
</parameters>
- <dataQuery>
<dataTrigger name="beforeReportTrigger" source="SUBIXCLT.BEFOREREPORT(L_ORDERED)" />
- <sqlStatement name="Q1">
- <![CDATA[
SELECT DISTINCT
erh.invoice_num,
pap.full_name EMP_CLAIMING,
DECODE(NVL(erh.expense_status_code, 'Not yet Submitted (NULL)'), 'CANCELLED', 'CANCELLED',
'EMPAPPR', 'Pending Individuals Approval', 'ERROR', 'Pending System Administrator Action',
'HOLD_PENDING_RECEIPTS ', 'Hold Pending Receipts', 'INPROGRESS', 'In Progress', 'INVOICED', 'Ready for Payment',
'MGRAPPR', 'Pending Payables Approval', 'MGRPAYAPPR', 'Ready for Invoicing', 'PAID', 'Paid',
'PARPAID', 'Partially Paid', 'PAYAPPR', 'Payables Approved', 'PENDMGR', 'Pending Manager Approval',
'PEND_HOLDS_CLEARANCE', 'Pending Payment Verification', 'REJECTED', 'Rejected', 'RESOLUTN', 'Pending Your Resolution',
'RETURNED', 'Returned', 'SAVED', 'Saved', 'SUBMITTED', 'Submitted', 'UNUSED', 'UNUSED',
'WITHDRAWN','Withdrawn', 'Not yet Submitted (NULL)') "EXPENSE_STATUS" ,
NVL(TO_CHAR(erh.report_submitted_date,'dd-MON-yyyy'),'NULL') SUBMIT_DATE,
NVL(TO_CHAR(erh.expense_last_status_date,'dd-MON-yyyy'),'NULL') LAST_UPDATE,
erh.override_approver_name ER_Approver,
fu.description EXP_ADMIN,
erh.total,
erh.description
FROM
AP_EXPENSE_REPORT_HEADERS_all erh,
per_all_people_f pap, fnd_user fu
WHERE erh.employee_id = pap.person_id
AND fu.user_id = erh.created_by
AND NVL(erh.expense_status_code, 'Not yet Submitted') NOT IN ('MGRAPPR', 'INVOICED', 'PAID', 'PARPAID')
AND pap.full_name = NVL(:claimant, pap.full_name)
AND TRUNC(erh.report_submitted_date) BETWEEN NVL(:expense_date_from, '01-JAN-1999') AND NVL(:expense_date_to,'31-DEC-2299')
AND fu.description = NVL(:raisedby,fu.description)
AND erh.expense_status_code = NVL(:status,erh.expense_status_code) &LP_ORDERED_BY
]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReportTrigger" source="SUBIXCLT.BEFOREREPORT(L_ORDERED)" />
- <dataStructure>
- <group name="G_XP_CLM_TRACKNG" source="Q1">
<element name="INVOICE_NUM" value="INVOICE_NUM" />
<element name="EMP_CLAIMING" value="EMP_CLAIMING" />
<element name="EXPENSE_STATUS" value="EXPENSE_STATUS" />
<element name="SUBMIT_DATE" value="SUBMIT_DATE" />
<element name="LAST_UPDATE" value="LAST_UPDATE" />
<element name="LP_ORDERED_BY" dataType="varchar2" value="SUBIXCLT.LP_ORDERED_BY" />
</group>
</dataStructure>
</dataTemplate>The PL SQL..
The PL SQL..
CREATE OR REPLACE PACKAGE Subixclt IS
L_ORDERED VARCHAR2(50);
RAISEDBY VARCHAR2(50);
STATUS VARCHAR2(50);
CLAIMANT VARCHAR2(50);
LP_ORDERED_BY VARCHAR2(50);
FUNCTION BEFOREREPORT(L_ORDERED IN VARCHAR2) RETURN VARCHAR2;
EXPENSE_DATE_FROM DATE;
EXPENSE_DATE_TO DATE;
--RETURN VARCHAR2;
END;
CREATE OR REPLACE PACKAGE BODY Subixclt IS
FUNCTION BEFOREREPORT(L_ORDERED IN VARCHAR2)RETURN VARCHAR2 IS
BEGIN
Fnd_File.PUT_LINE(Fnd_File.LOG,'L_ORDERED'||L_ORDERED);
DECLARE
LP_ORDERED_BY VARCHAR2(50);
L_ORDERED VARCHAR2(50);
RAISEDBY VARCHAR2(50);
STATUS VARCHAR2(50);
CLAIMANT VARCHAR2(100);
EXPENSE_DATE_FROM DATE;
EXPENSE_DATE_TO DATE;
BEGIN
IF (LP_ORDERED_BY='Expense Report Number') THEN
LP_ORDERED_BY :='order by 1 asc;';
ELSIF (LP_ORDERED_BY='Person Claiming') THEN
LP_ORDERED_BY :='order by 2 asc;';
ELSIF (LP_ORDERED_BY='Submit Date') THEN
LP_ORDERED_BY :='order by 4 asc;';
END IF;
RETURN(L_ORDERED);
--RETURN NULL;
END;
END;
END;Thanks for looking..
Steven
Edited by: Mr_Alkan on Jun 4, 2010 3:35 PMOne has to initialise a session first for use with Oracle Apps if you want to make it run as a concurrent job.
Any decleration within your package will not be recognised unless initialisation is sucessful.
Investigate the built-in packages:
FND_GLOBAL - for initialisation
FND_SUBMIT - for setting session relevant parameters
-- function returns true or false depending on whether the initialisation was sucessful or not
create or replace function is_Init_OK (p_User_Name in varchar2
,p_Responsibility in varchar2
,p_Language in varchar2) return boolean as
b_Set_NLS boolean;
b_Set_Mode boolean;
r_ISet fnd_Init := Get_Init_Set(p_User_Name, p_Responsibility);
begin
-- 1
fnd_global.apps_initialize(r_ISet.User_ID, r_ISet.Resp_ID, r_ISet.App_ID);
-- 2
b_Set_NLS := fnd_submit.set_nls_options(p_Language);
-- 3
b_Set_Mode := fnd_submit.set_mode (false);
return (b_Set_Mode and b_Set_NLS and ( (r_ISet.Resp_ID is not null)
and (r_ISet.User_ID is not null)
exception
when others then
return false;
end is_Init_OK;
-- for example
declare
l_User_ID number = 'IMPORT_POST'; --- import post user
l_Resp number = 'Import and Posting responsibility' -- import posting responsibility
l_Language varchar2(100) := 'AMERICAN';
b_Init boolean := false;
INIT_EXCEPTION exception;
begin
b_Init := is_Init_OK(l_User_ID, l_Resp, l_Language);
if (not b_Init) then
raise INIT_EXCEPTION;
end if;
-- conitnue with your processing
exception
when others then
when INIT_EXECPTION then
when others then
end;
/ -
Stop(); within movieclip doesn't work and all my other code doesn't run
Hey guys,
I've got a movieclip which has the code stop(); written within it, so that it doesn't play unless i interact with it. What happens now is that when i run the swf file, the entire movie keeps looping, and all my other code just doesn't run.
I've named my instances buyButton and so on but yeah, somehow it just ignores all my code and just loops. Help!Hi Ned,
In the main timeline it's just one frame yes. So on my main timeline there is a movieclip. Within that movie clip is an animation that adjusts the 'shine' on it. That animation is 20 frames long and i put a stop(); on the first frame inside that movieclip, with the intention that when i publish the swf, the movieclip doesn't loop, but should stop on the first frame. Only if i start to move my cursor over the movieclip, then it has feedback, which is to play the 'shine' animation. That sorta thing. So i had some code in the actionscript layer which edits the text property of the movieclip and it changes from "Click to Buy"(as shown in the screenshot) to "Buy a Shirt!".
However, when i publish the swf file, the other code, like the one which changes the text property of the movieclip is ignored and also the stop(); function within that movieclip too. And i end up having a movieclip which constantly loops within itself. Other code which i put in, like setting the buttonMode = true and useHandCursor = true are also ignored. The odd thing is that there are no error in my output window. and my publish settings are set to use Actionscript 3.
EDIT: sorry i used my other account on this haha -
Run App Engine through command line but have it show up in Process Monitor
We are trying to run Application Engine through command line and have it show up in the Process Monitor.
We have successfully ran the Application Engine through command line. We also can successfully run the Application Engine through PIA.
Only when you run the AppEng through PIA it goes through the Process Scheduler and shows up in the Process Monitor.
We would like to be able to do this through command line as well. Has anyone done this before?I'm not sure if it is (easily) doable.
=> Fire a process through the front end appl is nothing but insert few rows in process scheduler tables settings (PSPRCSRQST, PSPRCSQUE), then the process scheduler is taking information from there every x seconds and eventually run the command (on the process scheduler server) keeping an eye on the process result in the tables to post the result.
=> Fire psae through command line (or pssqr) bypass the process scheduler, you can run it from any client... so even without any clue about Process Scheduler server or even without Process Scheduler at all (cf. the very first AE running during an installation is VERSION without anything else than the client).
So finally, your AE program has no clue where it should run outside the client you are fired the command from (i.e. on the batch server as it is running when you are fired the same AE through the front end application), nothing more about the process scheduler configuration file, and where the output files should be posted.
Maybe not by running the AE from the command line, but by simulating the actions as it would be from the front end application, for instance by inserting in the tables whatever you want to run... but it sounds odd. Probably some developer might have done this before... but this should be reconsidered by Peopletools version/patch level (or through CI ?)
Nicolas.
added the last paragraph
Edited by: N Gasparotto on May 21, 2010 2:46 PM -
Text "disappearing" on run of symfony build commands
When I run a symfony build command using the Leopard Terminal.app, I get disappearing text as if the output is sending escape characters to change the text or something--but the color of the text is the same as the window, so it's effectively invisible.
I made a screencast and put it up here:
http://media.notbrain.com/terminalTextDisappears.mov
What happens:
Run command
Text disappears after several lines of output
Reappears for a little bit
Disappears for the bulk of model generation
Reappears at the end
After it runs I scroll back up to the top and triple click in the area of the first invisible text to show it's there, just the same color as the bg. Then I scroll down and triple click on more spots, then click once to make it go back to invisible. Strange.
Thanks!More on this issue here:
http://www.nabble.com/Some-output-not-displayed-on-OS-X-Leopard-td13537590.html
and
http://www.phing.info/trac/ticket/222 -
How can I run my program on command line?
I'm having some trouble trying to run my program on command line.
I get a message saying "Exception in thread
"main" java.lang.NoClassDefFoundError: Rectangle
<a href="http://img145.imageshack.us/my.php?image=untitled2copylh2.jpg" target="_blank"><img src="http://img145.imageshack.us/img145/3002/untitled2copylh2.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
import java.util.Scanner;
public class Rectangle
public static void main(String[] args)
int width;
int height;
int count = 1;
Scanner scan = new Scanner (System.in);
System.out.println("Please enter the width of the rectangle: ");
width = scan.nextInt();
System.out.println("Please enter the height of the rectangle: ");
height = scan.nextInt();
while (count <= width)
if(width < 1 || width > 30)
throw new IllegalArgumentException("The numbers must be in range");
if(height < 1 || height > 30)
throw new IllegalArgumentException("The numbers must be in range");
for (int star = 1; star <= height; star++)
System.out.print("*");
System.out.println();
count++;
}What doesn't work?
When you type javac Rectangle.java do you get error messages? Does it create the file Rectangle.class? If yes, type java Rectangle and your program should run. If you get an error post it but if you followed earlier advice you should be able to solve the problem yourself. -
Photoshop CS5 x64 doesn't run.
Hello!
I have just installed the trial version of CS5 master collection on a Win 7 and the x64 version of Photoshop doesn't run and displays the error code (0xc000007b).
I have the uninstalled both CS4 and CS5 suites and reinstalled the later and the problem continues.
My computer has the folowing sistem requirements:
Intel core i7
6 GB ram
Nvidia GeForce GT 330M with 1 GB.
windows 7 home premium.
So i guess it should be running.
Can anyone please help?Given: You know Photoshop CS5 x64 works on other Windows 7 x64 systems, so something's wrong with YOUR setup.
You have two avenues you can travel:
1. You can try to modify your existing system configuration so that it will start to run Photoshop CS5 x64.
2. You can start afresh with Windows, make Photoshop CS5 one of the first apps you install, then install the other things that you have chosen to make up your Windows environment and find out which one breaks CS5. Then back that component out.
You've mentioned several things upon which you have made decisions that may not be valid. For example, you mentioned shutting down the Comodo firewall and Photoshop still didn't run. Did you uninstall the Comodo firewall completely? With this kind of problem that's what it may take. Frankly, I've yet to see any valid justification for running any firewall other than the one that comes with Windows 7. Another invalid assumption is that just because the computer is a few weeks old it cannot have a virus yet. I'm not saying you DO have a virus, but you could have gotten one 5 minutes after you plugged it into the internet.
As running Photoshop CS5 x64 seems important to you, I'd suggest not fooling around with your existing system configuration any longer and start afresh with suggestion 2 above.
-Noel -
EVENT FIRST COMMAND AFTER SELECT
Dear friends
I'm now using Gemalto Developer's Suite and I want to test this event. However, I try different ways but fail to accomplish my test.
Do you know any materials, or just anything about this event? I searched throughout various sources, materials but all I have now is a small piece of information in GSM 43.019
Upon reception of the first command received by the GSM application after it has been selected or after the ATR if it is the default application, and before the Status >Word of the processed command has been sent back by the GSM application, the toolkit framework shall trigger all the toolkit applets registered to this event.
If the first command received by the GSM application is a toolkit applet triggering command (e.g. TERMINAL PROFILE), the toolkit applets registered on the >EVENT_FIRST_COMMAND_AFTER_SELECT event shall be triggered first.
The ProactiveHandler and the ProactiveResponseHandler shall not be available at the invocation of the processToolkit method of the toolkit applet on the >EVENT_FIRST_COMMAND_AFTER_SELECT event.From this material, I think it's quite vague to understand clearly this event.
Thanks in advance,
Jason
Edited by: Jason Gosling on Oct 19, 2011 7:29 PMhi Jason.
This is automatic event that was born by OS instead mobile.
When OS received the first command "00 A4 04 00 00 0xXX + AID APPLET GSM" from User, OS will look in the ToolkitApplet Registry table and find the applet with EVENT FIRST COMMAND AFTER SELECT, then OS call method "process toolkit" of this applet.
the called applet will do something that it want. Maybe send data to ME.
When method done, OS continue action normally.
This is for GSM applet on JavaCard. And the GSM applet is not default program.
For the case: GSM is default, that mean OS automatic select GSM APPLET when it starts, no need to any command form ME or User, OS auto create this event and look toolkitapplet to run processToolkit method.
hope this is fun !! -
Aperture on the new Imac doesn't run !!!!
I just got my new intel Imac, gess what Aperture doesn't run on it !! After installation i got following message :
Your computer does not meet the minimum hardware requirements for Aperture.
What do you need more to run it ???
Cazn anyone help me ??Are you saying the installer won't work on an Intel system? The notice on the update says it will be available via software update. For this to work, I have to install it first before it can be updated.
Aperture is a free update to UB when they are
available
even if you try a Manual install it WILL NOT WORK
it is NOT compiled for the intel processor and
Rosetta only emulates for simple programs
IT WILL NOT WORK
wait untill the new update is out feb/march ish
DAVE -
Error running SQL and EXEC commands in parallel
Dear Gurus,
We are applying 3480000 and in process as soon as workers start it come out of adpatch session and give su the following error:
************* Start of AD Worker session *************
AD Worker version: 11.5.0
AD Worker started at: Sun Sep 02 2007 23:11:01
APPL_TOP is set to /sgmtemp/prodappl
Worker process 4 started.
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
Starting phase 0 (A0): first
There are now 98197 jobs remaining (current phase=A0):
0 running, 123 ready to run and 98074 waiting.
Assigned: file adsysapp2.sql on worker 1 for product admin username APPLSYS.
Assigned: file cssruwq1.sql on worker 2 for product cs username CS.
Connecting to CSD......Unable to connect.
AutoPatch error:
The following ORACLE error:
ORA-01017: invalid username/password; logon denied
occurred while executing the SQL statement:
CONNECT CSD/*****
AutoPatch error:
Error while evaluating "Check Object"
Telling workers to quit...
3 workers have quit. Waiting for 1 more.
All workers have quit.
Error running SQL and EXEC commands in parallel
You should check the file
/sgmtemp/prodappl/admin/msbep004/log/3480000_sbm3.log
for errors.
applmgr@21:/sgmtemp/Oglupgr/3480000>
What could be the issue, i tried to connect CSD/CSD in sql and it connected.
Thanks in Advance
Regards
Kiran RanaHi Gurus,
Even i tried to recreate the FND_GLOBAL by performing the following, but still no luck:
output for scripts hearder value in FND_TOP:
applmgr@21:/sgmtemp/prodcomn/temp> cd $FND_TOP/patch/115/sql
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> grep Header AFSCGBL*
AFSCGBLB.pls:/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
AFSCGBLS.pls:/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
Output for script header value in Database:
SQL> select text from dba_source where name='FND_GLOBAL' and line <5;
TEXT
package FND_GLOBAL as
/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
package body FND_GLOBAL as
/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
8 rows selected.
We tried to re-apply 4 hours back when one of the support personnal ask use to run those
scripts. one of them went with out any errors but second one went with errors
as follows:
First Script @AFSCGBLS.pls
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLS.pls
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:24:10 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
DOC> | Copyright (c) 1993 Oracle Corporation Redwood Shores, California, USA|
DOC> | All rights reserved. |
DOC> +=======================================================================+
DOC> | FILENAME
DOC> | AFSCGBLS.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL specification for package: FND_GLOBAL
DOC> |
DOC> | NOTES
DOC> | This module is called by AutoInstall (afplss.drv) on install and
DOC> | upgrade. The WHENEVER SQLERROR and EXIT (at bottom) are required.
DOC> |
DOC> | HISTORY
DOC> | June, 1999 - Added function AUDIT_ACTIVE, bug 879630. Jan Smith.
DOC> | 11/19/01 MSkees - Added DBDrv line and 'SET VERIFY OFF' for ARU auto
DOC> | generation bug 2047263 build
DOC> |
DOC> *=======================================================================*/
Package created.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Second Script AFSCGBLB.pls:
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLB.pls <
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:27:15 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Warning: Package Body created with compilation errors.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 -
Production
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql>
The second script (AFSCGBLB.pls) run's out with errors and changes status of almost 15000 objects as INVALID in database.
Regards
Kiran Rana -
Installed Adobe Flash but it doesn't run well on Chrome...
First, sorry if my english isn't perfect. I'll try to make me understand..
I have adobe flash installed on my pc. It works on Firefox. But with Chrome it seems it doesn't run well. I can see the videos in Chrome. But when I go on websites like Issuu.com to see a file (you know,like a book where you can turn the pages) it doesn't work. It doesn't even start. The same happens when I go on browser games that use flash: the screen shows the loading bar but at some point it stops loading (but it doesn't crash). In some other games it loads but the game looks with some errors and doesn't run correctly.
I have uninstalled adobe flash then reinstalled it but nothing.
I have restarted the pc but nothing.
I have typed "chrome:plugins" and disabled one of the two adobe flash files but nothing.
I have cleaned the Chrome cookies and cache with CCleaner but nothing.
I have deleted the Flash Player folders but nothing.
What else should I do? I have also reinstalled Chrome but still nothing.
Can you help me?
Below is an example of how an in-game pic looks in Chrome. It is cutted!What is your operating system & version?
What is your web browser?
You downloaded Flash Player, but did you also install it?
What exactly means "doesn't work/run"?
Maybe you are looking for
-
Can we build equity and acquire assets without banks while rebuilding credit??
Hi.Thank you for taking a look at my post. I hope we can help each other. I have 3 goals for this post. 1 - to reach out to this community for opinions, leads, and hopefully contact info for private lenders who really do lend based on the asset and
-
Temp folder stopping me from replying to messages
I am unable to reply to emails. I have version 24.6.0. When I click Send, error message says "Unable to open the temporary file C:\Users\Robert\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting." I tried to delete this and two
-
Windows Server - Oracle 9i and Linux Client ?
Hi all, Is it possible to have Oracle Database working on Windows 2000 Server and its client i.e. forms/application running on Linux environment. If so, then will my Developer6i work for installation of client in Linux. And if it works, then how can
-
Hi I'm new to the iCloud, and I wonder how I can change my name @ the LogOn screen from iCloud (next to my picture) regards
-
How planned values to be determined in (03) Cost-Based POC RA calculation
Hi All We are implementing (03) Cost-Based POC in our project . Pls guide me how Planned values flow to KKA2/KKAJ to determine POC % Pls help me ASAP Thanks Sneha