Number keys repeat when using bill pay

When filling in the amount to pay, the number keys will repeat (ie: 3 becomes 33).  When I try to delete the extra number, both are deleted.  Not sure what to do.

Try another keyboard since it seems like a KB problem.
Also inspect the keyboard for problems like some of the keys do not fully return to the "up" position after being depressed.

Similar Messages

  • Cannot use bill pay on Bank of America App

    When I try to use bill pay I get error message, "bank account is invalid or inactive."  Why??  I use bill pay all the time on my desktop.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Serial number not  accepted when using disc to download on second computer.

    Serial number not accepted when using disc ot download CS6 to second computer. Help...

    make sure you're entering the correct serial number for the correct product:  http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    if you're certain that you are doing that, contact adobe support:  http://www.adobe.com/support/chat/ivrchat.html

  • My iPod shuts off repeatedly when using the Nike running app. Have already tried the headphones solution that Apple has recommended. Can anyone help?

    My iPod shuts off repeatedly when using the Nike running app. Have already tried the headphones solution that Apple has recommended. Can anyone help?

    Using the 5th generation iPod. Purchased it a few months ago before the new one was launched. Yes the workout randomly ends when I am no where near the time or distance I have programmed in. I keep tried to restart the workout and the same thing keeps happening over and over again. I figured it may have been the headphones but I have even tried holding the headphone connection in place, and different headphones as well and it continues to happen.

  • Will Not Burn DVD+R DL - Keys Repeat When Pressed

    Hello, I am trying to burn a disk image onto Verbatim DVD+R DL media using Disk Utility. I have also tried using Toast Titanium 9 but with similar results. I am using the on board Matshita UJ-857E optical drive. Basically, the Disk Utility moves through each of the processes without ever writing anything to the disc. Then the application freezes upon reaching the "Finishing burn" stage. I left it running overnight to no avail. Additionally, the trackpad stops working when the burn starts, the keys repeat 6 or more times (llllllliiiiiiikkkkkkkeeeeeeeeeeeeeeeeeee ttttttthhhhhhhiiiiiiiiiiiiiiiiiiisssssss), and I cannot shut OS X down (it freezes at a blue screen with a spinning disc). Burning CD-Rs work as expected. Here is the Disk Utility log:
    2008-10-02 15:30:50 -0400: Burning Image ”-------------”
    2008-10-02 15:31:10 -0400: Image name: “-------------”
    2008-10-02 15:31:10 -0400: Burn disc in: “MATSHITA DVD-R UJ-857E”
    2008-10-02 15:31:10 -0400: Erase disc before burning: No
    2008-10-02 15:31:10 -0400: Leave disc appendable: No
    2008-10-02 15:31:10 -0400: Verify burned data after burning: Yes
    2008-10-02 15:31:10 -0400: Eject disc after burning
    2008-10-02 15:31:10 -0400:
    2008-10-02 15:31:10 -0400: Preparing data for burn
    2008-10-02 15:33:16 -0400: Opening session
    2008-10-02 15:40:14 -0400: Finishing burn
    Again, it hangs at the last stage. Any ideas?

    I've run into the exact same problem shaun including, oddly enough, the keyboard problem during the "finishing burn" stage and the incredibly long shut down (although it does eventually shut down).
    No solutions for you, but if misery loves company you have some. And I agree, you ought to be able to burn the occasional disc with the built in drive without having to buy an external burner.

  • I need a firefox versin that is not 4.0 to be able to use bill pay with my bank how do i get it? they need to update their website to use firfox 4.0

    Hi,
    My bill pay program worked with the older version of Firefox (see url below). It does not work with the most current one. I can either wait until they get it to work with firefox 4.0 which may be never, change banks or maybe (please) you have some easy fix that will work for them so I don't have to uninstall 4.0 and re-install an older version of firefox which I can't seem to find on your website, sigh.
    so bottom line is there an easy fix and if not can I get an older version of Firefox to use?
    Thanks,
    Cathy

    In some cases, the incompatibility is due to the new HTML5 parser in Firefox 4. You could disable that and test whether the bank site works again.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''html5''' and pause while the list is filtered
    (3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
    Then reload the bank page and see whether it works.
    And if you need it, here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 4.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • Impossible to use the $ sign when using billing template.

    My setting (default language) of my imac are set to French Canadian.When using page, I try to create a bill from template and the default dollar sign is in "euro".If I switch it to the "$" sign, it works up until I try to print, than the multicolor start spinning and than the apps quit.It impossible to work around it.If I print with the "euro" symbol, it works fine.Ive try switching my language setting but no luck!
    Please help!

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Why should we select all key fields when using for all entries

    Hi,
    Why should we select all key fields in our select query when using for all entries statement?
    I read about for all entries but this point was not clear in any post.
    Please explain me
    Regards,
    Subhashini

    Dear Subhasini,
    It is because FOR ALL ENTRIES deletes the duplicate entries before populating the target internal table.
    Please do an F1 on FOR ALL ENTRIES & read the SAP documentation.
    I mean how duplicate entries will not get deleted when we use this?
    Quite simple, if you select  all key fields then each entry will be unique & there will not be any duplicate entries to delete !!
    BR,
    Suhas
    Edited by: Suhas Saha on Oct 16, 2009 9:41 AM

  • Alt key stuck when using mouse in flash CS5.5 on os x lion. sucks. please help.

    Hi there,
    since I've updated to lion flash cs5.5 is utterly unusable. The alt key is always stuck in this app when I use the mouse. So if I select something then try to move it, it copies it (as if I was holding down alt key). It basically means I can't use flash for anything..
    Has anyone else had this issue and resolved it?
    I saw similar forum posts for photoshop cs5 and snow leopard, and even tried the utility provided on those forums. Didn't work.
    I removed my wacom tablet driver,
    I reinstalled flash,
    I shut down EVERYTHING except flash.  Nothing works - alt key is always active in flash.
    Is this some kind of bad joke from Adobe? Is there really no fix for this? I can't believe it - honestly...
    Additional note - in the key remapping page - it reckognizes the alt key normally, and all other key combinations - it is only when using the mouse that the alt key is stuck.
    El mensaje fue editado por: georgecookontheroad

    Hello,
    I was having the same exact problems with Flash Professional after upgrading my OS X to Lion.  (Alt/Option key seems like it's stuck / Duplicating objects on stage just by clicking and moving the object.)  My main problem was not being able to curve a straight line with the Arrow tool.  Instead it would create a corner point as if the Alt/Option key was being held.
    I stumbled upon this thread before finding my solution so I thought I'd share what worked for me.
    Here is the thread I found with the solution that worked:
    http://forums.adobe.com/message/5222999
    Basically I had a program called AirDisplay installed.  AirDisplay allows me to use my iPad as a second monitor for my Mac.  So if you have this program installed, or one similar to AirDisplay, uninstalling this program may get your Flash Professional to work correctly again.  It certainly did for me to my amazement.
    Hope this works for you or anyone else who is experiencing this weird and frustrating problem!

  • Return key disabled when using safari with Mavericks OS X

    Hi,
    Has anyone got a way to use return key when using safari??

    niall1111 wrote:
    It is,and always was, the return key that did this in snow leopard and other operating systems!
    ??? I have two Macs that can run Snow Leopard & in neither of them does the return key take me back a page. Also, nowhere in the lists of keyboard shortcuts for OS X or any of the browsers I use (Safari, Firefox, & Chrome) is the return key mentioned as providing this shortcut.
    Some web pages may have been programmed to respond to the return key that way, but not many I have ever encountered are. I guess it is possible some extension or other third party add-on might provide that function, but itis definitely not something that has ever been built into OS X or any of the common browsers used with it.
    In Safari (on Snow Leopard, Lion, Mountain Lion, & Mavericks) two keyboard shortcuts are provided by default to go back a page: one is the CMD-[ combination Barney already mentioned. The other is CMD + the left cursor key. Likewise, CMD+] or CMD + the right cursor key will take you forward a page (if you have previously gone back to a previous page).

  • Why don't my bluetooth keys repeat when I hold them down?

    Although I have the System Preference for keyboards set for "Fast" repeating, my letter keys don't seem to repeat in any text program. Is there something I can do to fix that?
    The backspace key and spacebar repeat just fine. Strange.

    sarahgarzon,
    log in as your administrative user and open Terminal. Run the following commands inside of the Terminal window:
    defaults write -g ApplePressAndHoldEnabled -bool false
    exit
    After running these commands, quit Terminal and log out. When you log back in again (as any user), the key repeat will be active.

  • Number of participants when using Collaborate Live

    I am trying to use a Collaborate Live session from Acrobat 9 Pro. According to Adobe's documentation, using Collaborate Live from Acrobat allows you to "share a document with as many people as you want." However, it only allows two people to log into the Collaborate Live session.
    I am using one of the Free Acrobat.com accounts. I know that the free acounts are limited to two participants when using ConnectNow but Adobe's documentation seems to suggest you can have unlimited participants when doing a collaborate live session. The documentation states over and over that you cas invite as many people as you want, but the documentation for ConnectNow is very clear you can only have TWO participants.
    So my question is why is a collaborate live session being limited to the ConnectNow two participants?
    Thanks!

    Hi,
    I am on the product team and in a good position to assist you.
    I have alarted engineering of the issue. Can you share your adobe id (the email address you use to log into your account) with us? This will help us troubleshoot the issue.
    In the meanwhile, as a work around, you can ask participants to join your meeting session by sending them the meeting URL directly. Your meeting URL never changes and you customize it so it's easy to remember. I know this is not as convenient as the feature inside Acrobat, but it does allow you to shre you screen with your particpants.
    Thanks,
    Karen
    Acrobat.com

  • WRE54G v3 - WEP key setting when using ASCII passphrase

    When entering WEP information for this device you may notice that the range expander is asking for the WEP key in hex (for example: 128 bits 26 hex digits). If the key that you have set in your router is using a passphrase then you will need to convert it to hex. Entering the passphrase and clicking the generate button will not work if your router is set to use ASCII as the WEP key format. The result seems to be that the PC may attempt to connect (and/or show as connected) but will not receive an IP address and does not really connect to your network. Strangely, the WRE54G will show that it has connected sucessfully to the router. Instead, convert the passphrase to hex one character at a time then enter the hex digits as the hex key. For example: if you are using 128 bit and your passkey is: 1234567890123 then enter 31323334353637383930313233 as the 128bit hex key (1 in ASCII = 31 in hex, 2 in ASCII = 32 in hex, etc...). http://www.asciitable.com/ 

    Hi, The solution I posted above works for me . I can ping the WRE from the network and access the configuration page. The wireless router I am connecting to is a TP-LINK TL-WR340G. The extender is a WRE54G ver. 3 running v3.04.01 firmware. Instead of converting the passphrase to hex I could just set the TP-LINK router to use a hex key instead but thats a pain. Then I would have to type in a long hex key when adding another wireless device to the network or when allowing a guest device on the network. An ASCII passphrase is so much easier to remember and much less typing. If I leave the TP-LINK router set to accept an ASCII passphrase then convert the ASCII passphrase to hex and enter it into the WRE extender then I can use an ASCII passphrase when connecting a device through the extender .
    What I found confusing initially though (before finding the solution) was that if I enter the ASCII passphrase into the extender setup and click the generate button for it to generate the 4 hex keys, the extender claims to connect successfully. I cannot ping it from the network and a wireless device will not get a connection through it but the light does turn blue and the setup screen shows the correct mac address in the link status section. Seems like a bug...

  • How do I clear the control alt delete key downs when using input acquire.vi?

    I am trying to monitor keystroks...  When I use the Input Acquire.vi after I log in to my system it says the Control LAlt and the Delete key are down and my code does not like that because the keyboard value is not corect...the Keypressed array always has 3 keys down....
    Is there a way to clear them or send key ups some how to get rid of them.
    Thanks for any help you can provide...
    I am using Labview 8.0
    Thanks
    Eric Horwitz

    There is no way that you can press multiple buttons at exactly the same time. Which keys are you trying to press? Are you talking about "PlatMods" (shift, ctrl, etc.)?
    Keep a shift registers with the states of the desired buttons in a boolean array and change the respective elements to true or false, depending on key-up and key-down events. On the Key down events, check if all elements are true and act accordingly.
    LabVIEW Champion . Do more with less code and in less time .

  • Slide repeats when using build outs

    I'm new to Keynote Version 4 and I'm having some trouble with a self-forwarding slideshow I'm creating. Every time I use a build out, the slide repeats on playback. I'll use build ins to add photos (most of it is photos) and then when I want to get rid of them by using a build out, the problem occurs.
    Any ideas? Thanks!

    Russell, glad you found a solution.
    What I was going to suggest first, before looking at your sample, was to have something on a slide that as an automatic build so that when you go to the previous slide, that object would act as your transition. In playing around, I have found some pleasing effects using either graphic and text elements.

Maybe you are looking for