Number of CAL for my network

how do I know how many CAL I have in my windows AD and how many I need to get?
my AD is windows 2008 R2.
I have abt 350 windows desktops/laptops.
We hava a new office to setup which may require 20-30 new desktops.
my boss is worried that we may run out of CALs and very worried that MS audit us for license compliant failure.
is there any software that I can use to check how many active CAL I am using?

Hi yeowkm,
MS Licensing is easy to understand regarding Server Lic. and required CALs for your Clients. The Problem is: you have to read it through and there is no technical way to retrieve the number of CALs you've already bought. All you can do is track the usage
of Servers - but this seems a little bit oversized for your environment.
If you have a Volume License Agreement you may track your current MS Licenses in the VLSC:
https://www.microsoft.com/licensing/servicecenter/
Please read the following:
Have a look at the CAL Licensing
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx
This technet blog answers many questions regarding CALs:
http://blogs.technet.com/b/volume-licensing/archive/2014/03/10/licensing-how-to-when-do-i-need-a-client-access-license-cal.aspx
Basically you need at least one Server-Lic. corresponding to the Edition and Operating System Environment. For each Client Computer you need one User- or Device-CAL (this depends on the usage of your Client-Computers). Attention: CALs are version specific
- if you bought CALs for Windows Server 2008, you cannot use those licenses to access a Windows Server 2012. If you have to purchase new CALs, they will be Windows Server 2012 CALs but you have downgrade rights to Windows Server 2008.
kind regards
Switch1210

Similar Messages

My phone locked and i keyed in the number to release it, but it needs now a password for the network how do i find this

my phone froze, so i restarted it with the pin number, but now it needs further info and needs a password for the network . how do I retrieve this password?

In needs a password for WHAT network? If you're talking about a WiFi network, you'll have to ask whoever owns the network. We have no way of knowing.

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

50 users per device, assuming that the "main" router is setup to deliver an adequate number of network IP addresses for all devices.
2 AEBS = 100 users, but that is really more of a theoretical max.
If you really need 100 connections, it would be much better to use 3 AEBS to spread things out.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

I am trying to restrict color printing on my laserjet 4700dn for my network

Here is my issue. I am trying to restrict color printing on my Laserjet 4700dn for my network. I have configured it for "color if Allowed" and all works perfectly. I was then going to allow certain users to print in color so I started by configuring my username and allow color. Every time I print it is still in black and white. I then decided to look at the color usage log and what I found would explain why. The color usage log only shows the username of one user on my network. All other jobs just show the date and number of pages. So my issue is why can my printer not see all the other users and how do I configure it to do so. Also why would only that one user show in the log. It also does not show any applications but it does for that one user. Is there something else that needs to be installed on the computers for it work?

Hi
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How choose which partition of my external drive I use for my network

Hi,
I just bought a Linksys E3200 router for my network house. The setup was easy and everything work fine... well.. almost everything. I have a Iomega 1To external drive whit 2 partition ; the first one is a mac os extend for my Time Machine backup and the second one is NTSF for sharing my picture and music. I use the cisco connect software for setup my storage whit my external drive but I can't see the NTSF part. I can write/read in my mac partition but I don't want to use that part on my network.
My question is : Can I have 2 partition on my network? If not, how can I choose the partition I wanna use.
Thanks.
PS: I'm sur you notice it but english isnt my first language, sorry if isn't clear.

ksu62 wrote:
The infection names are: classload.jar-719ef6a5.zip
                                          classload.jar-5db452le31.zip
                                          ar3.jar-6ce3b2f-45l483f.zip
                                          classload.jar-lef99412-63bsd3fl.zip
Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

Setting Up Mailserver to received and Send Mail for external Network

I have a G5 currenty running 10.3.9 Server with Mail services run and working fine, we are upgrading to 10.4 Server and would like our Sales Reps the ability to send and Receive mail from outside the office. How do I configure my server, Router, ISP and/or Mail clients to do this??? we are currently able to recieve mail from outside just not send.

I cannot find the Line #submission inet n - n -- smtpd in the Main.CF file...here is what I get when I open it
# Global Postfix configuration file. This file lists only a subset
# of all 250+ parameters. See the sample-xxx.cf files for a full list.
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# sample-smtpd.cf).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination and $inet_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see sample-local.cf).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# $inet_interfaces, while $local_recipient_maps is non-empty and the
# recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#unknown_local_recipient_reject_code = 550
unknown_local_recipient_reject_code = 450
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 50 SMTP server process
# limit, this limits the mail inflow to 50 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# Insert text from sample-virtual.cf if you need virtual domain support.
# "USER HAS MOVED" BOUNCE MESSAGES
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.
# TRANSPORT MAP
# Insert text from sample-transport.cf if you need explicit routing.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#recipient_delimiter = +
# DELIVERY TO MAILBOX
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination
# and unknown@[$inet_interfaces] is returned as undeliverable.
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
# luser_relay works only for the default Postfix local delivery agent.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
# For details, see the sample-filter.cf file.
#header_checks = regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
#fast_flush_domains = $relay_domains
#fast_flush_domains =
# SHOW SOFTWARE VERSION OR NOT
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 10
# DEBUGGING CONTROL
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
# If you don't have X installed on the Postfix machine, try:
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
# INSTALL-TIME CONFIGURATION INFORMATION
# The following parameters are used when installing a new Postfix version.
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
sendmail_path = /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
newaliases_path = /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
mailq_path = /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
setgid_group = postdrop
# manpage_directory: The location of the Postfix on-line manual pages.
manpage_directory = /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
sample_directory = /usr/share/doc/postfix/examples
# readme_directory: The location of the Postfix README files.
readme_directory = /usr/share/doc/postfix
# THE FOLLOWING DEFAULTS ARE SET BY APPLE
# bind to localhost only
inet_interfaces = all
# turn off relaying for local subnet
mynetworks_style = host
# mydomain_fallback: optional domain to use if mydomain is not set and
# myhostname is not fully qualified. It is ignored if neither are true.
mydomain_fallback = localhost
myhostname = jamestownpress.com
mailbox_transport = cyrus
enable_server_options = yes
luser_relay =
maps_rbl_domains = dun.dnsrbl.net
message_size_limit = 0
mydestination = $myhostname,localhost.$mydomain
smtpd_use_tls = no
smtpd_enforce_tls = no
smtpd_tls_loglevel = 0
smtpd_sasl_auth_enable = yes
smtpd_use_pw_server = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_pw_server_security_options = plain
server_enabled = 1
relayhost =
smtpd_client_restrictions = permit_mynetworks reject_rbl_client dun.dnsrbl.net permit
always_bcc =
mynetworks = 127.0.0.1/32,192.168.0.0/16,192.168.1.98,192.168.1.3,192.168.1.13,192.168.1.5,1 92.168.1.22,192.168.1.18,192.168.1.41
content_filter = smtp-amavis:[127.0.0.1]:10024
so what do I need to change

Password for wireless network not remembered

I am stuck with the following situation. I have a wireless network overhere, which is a 802.1X-type network which consists of a huge number of different base stations connected together, which requires me to login and has TTLS (PAP) type identity control.
When I configure this into the Internet Connect application, with my password, it connects. However, on reboot, the Finder immediately asks for my password. When I look in Internet Connect, it's still there, but when I look in System Prefs, the password is not there (only a blank field). When I enter it, click OK, and check the dialog again, the password is already gone into the wind.
I deleted all entries of the network in all my keychains, reinstalled my system and now I've set the keycahin entry for the network accessible by all programs, but that doesn't help me either. I had a Macbook here not long ago, which didn't suffer from this problem (however, it did not reconnect after sleep/reboot all the time, but never asked me for my password).

Do not check "Remember Networks this computer has joined."
In Advanced>Preferred Networks, enter the name of your Network. This is how I have mine set up and I have not experienced any more problems like yours, although I did in the past. In Preferred Networks, I have redundantly entered the same name twice, just in case it skips off to the second one. Probably not needed, but it's been working fine like that for a long time.
However, since I don't have an Airport Extreme, I don't use Airport Utility. Definitely try rebooting the AE. Might try applying or reapplying the 10.6.8 Combo update.

Scanner for mixed network

Does anyone have a suggestion for a (network?) scanner that will allow both Windows and Mac machines to use the scanner over a network?
Or, stated another way, we have an office environment with both Windows and Mac machines and we are hoping to find a scanner that we can either plug into one computer and share or plug into our network and access over IP or the like.
I can find several solutions for a Windows only environment- is this a huge hole in the idea of using Mac's in an office situation?
Thanks,
Jared

A number of office-ranger copier MFD's have the ability to scan to a shared folder across the network using SMB or FTP as a protocol. This protocol support allows you to configure shared folders on an individuals Mac or PC and 'push' scan a document directly to the computer as an image (such as TIFF or JPEG) or text (PDF using built-in OCR). This function of pushing gets around the limitation of finding a pull scanner that has Mac software. Also, being networked, it does not have to rely on the sharing device being turned on.
We have a number of Canon imageRUNNER's configured to do exactly this, although the majority of the office uses Mac. The SMB share path to the users shared folder on their Mac is saved into the copier's address book and all the user has to do is select the address after loading the documents into the feeder. The machine has built-in OCR so if they select PDF, the copier does a reasonably good job of converting the scanned image into a search-able text PDF.
On the Canon's this function is called Universal Send. It is most likely called something else on other brands. But the term 'push scanning to SMB' would mean something to any sales rep flogging an office product.
If you didn't want to get a copier-based product there are dedicated office scanners that provide the same feature. Again, you just need to look for a device that support push scanning via SMB or FTP.

Sr. Number Management issue for movement type 281

Hi,
Background:
I have a Material "PART1" with Serial no. profile "0001" and relevant for "back flushing".
This profile "0001" has the below controls in config:
MMSL - Maintain goods receipt and issue doc. - 02 - Optional. We cannot maintain "03", since this Material is relevant for "back flushing".
SDLS - Maintain delivery - 03 - Obligatory
With this config Serial no. is optional for all the Receipts, Issues and Serial no. is required for Sales Delivery/PGI. PGI will not be able to post without entering Serial numbers. All these are working fine as expected.
Issue:
User creates Delivery through T.code CNS0 for a network (Projects) for the same Material "PART1" and processing the PGI. During PGI, system is not stopping to post PGI without entering Serial numbers (Allowing to post PGI without Serial Numbers.), even though this Material has Profile "0001" - SDLS - Maintain delivery - 03 - Obligatory.
Movement type issued by system during network related delivery is 281.(No Special Stock).
During this PGI process System is considering this Business transaction similar to MMSL( Receipt/Issue ) instead of SDLS.
Options / Solution for this issue u2013 to make this specific MMSL movement type as Serial Number required:
We can maintain the Serialization Parameter in the below 2 steps specific Movement type(281).
1.Define flow type groups
u201C0001u201D - MMSL u2013 REQ u2013 03 (Obligatory)
2. Assignment of Movement Type Group to Movement Type
281 u2013 u201CREQu201D
With this Config I can able to get the error for the Delivery movement type 281 (GI to Network), if Serial Number is not entered in the Network delivery, which fixes the Issue.
I can able to process other receipts/issues (except 281) without Serial numbers, which is also OK.
But I can able to maintain the Back flush values u201C2u201D in Material master.
We can NOT able to create new Material with Back flush values u201C2u201D and Serial no. profile "0001".
We are having lot of materials with Back flush values u201C2u201D and Serial no. profile "0001". For existing Materials we are getting error u2013 Serial number Management is not possible with back flushing, whenever we change any Plant data in Material master.
Kindly provide the solution to fix this issue.
Let me know if you need more info .
In Config T.code u201COPT1u201D can we replace the movement type 281 with 601 to fix this issue, instead of the above config (Movement Type Group step 1 & 2) ?
Thanks,
Kumar Arcot

Hi Srinivas,
Thanks for the answer. It helped in solving the problem.
thanks,
Anjani.

Check existence of a classification for a network

Hi,
I wloud like to check the existence of a gived classification for a network.
To do this, I try to fill BAPI_OBJCL_EXISTENCECHECK that wait for an objectkey.
So I think I need to retrieve that objectkey using BAPI_OBJCL_GET_KEY_OF_OBJECT.
I try to dos o, using the following code :
FORM update_conversion_ref TABLES   pi_error_msg STRUCTURE s_tdline
                           USING    pw_aufnr
                                    pw_conv_ref
                                    pw_klart
                                    pw_clint.
DATA : lw_sb_key LIKE bapi1003_key-object_guid,
         li_return TYPE bapiret2 OCCURS 0 WITH HEADER line,
         lw_objectname like BAPI1003_KEY-OBJECT,
         lw_classtype like BAPI1003_KEY-CLASSTYPE.
constants lk_objecttable like BAPI1003_KEY-OBJECTTABLE value 'AUFK'.
*--- Define SB Key
CLEAR: lw_sb_key, li_return, li_return[],
         lw_objectname, lw_classtype.
move pw_aufnr to lw_objectname.
move pw_klart to lw_classtype.
CALL FUNCTION 'BAPI_OBJCL_GET_KEY_OF_OBJECT'
   EXPORTING
   objectname               = lw_objectname
   objecttable              = lk_objecttable
   classtype                = lw_classtype
       CREATE_MISSING_KEY       = 'X'
IMPORTING
   clobjectkeyout           = lw_sb_key
     TABLES
     return                 = li_return.
But li_return contains this error : 'E   |CL |669   |Class type 021 requires additional object'
Can you tell me what is wrong in my code?
King regards,
Morgan

Hi
While using the BAPI - 'BAPI_OBJCL_EXISTENCECHECK'
The object key (ObjectKey) must be transferred in internal format, before application of conversion exits. For example, a material number must be transferred with leading zeros.
Here's the sample code. Try changing you code in a similar manner and check if this works.
CALL FUNCTION 'BAPI_OBJCL_GET_OBJECT_OF_KEY'
     EXPORTING
          clobjectkeyin = clobjectkey
    IMPORTING
          OBJECTNAME     = l_object
          OBJECTTABLE    = l_objecttable
          CLASSTYPE      = l_classtype
     tables
          return         = return.
read table return
    with key type = 'E'
    transporting no fields.
if sy-subrc eq 0.
exit.
endif.
refresh return.
if keydate is initial.
write sy-datum to keydate.
endif.
CALL FUNCTION 'BAPI_OBJCL_EXISTENCECHECK'
     EXPORTING
          objectkey   = l_object
          objecttable = l_objecttable
          classnum    = classnum
          classtype   = l_classtype
          KEYDATE     = keydate
     tables
          return      = return.
Reward points if this helps.
Regards
Meera

Unlock 8520 for other networks???

Hi,
I have a BlackBerry Curve 8520
v5.0.0.1036(Bundle 1682, Platform 5.2.0.104)
I have entered the NAC from my network provider(Vodafone) and the device says it unlocked.
When I put a SIMcard from another network(O2) into the phone it requested a NETWORK MEP CODE. At first I thought it was asking again for the NAC and wasted a few attempts entering that number to no avail. I then followed the online instructions to the engineering Help screen on the phone to obtain the MEP code. I then tried to enter this code but it would not accept this code either. It will work without any problem with a Vodafone SIM as always but still asks for the NETWORK MEP CODE when I try a SIM from O2. It now says (0 attempts).
Is there anything I can do to resolve this to unlock the device?
I have contacted Vodafone who say there should be no need to enter any code other than the NAC they provided me with.
I have contacted O2 who say they are not familiar with the problem but that the problem is with the device and probably needs to be sent somewhere to be unlocked.
Any help/advice gratefully appreciated.
Thank you.
J

LisaRuttle wrote:
Hi,
I have the same problem, and seriously ned help, i ahve only 4 attempts left and am being told to pay Vodafone €20 get it unblocked!
Hi and Welcome to the Community!
Please see this helpful thread to start:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
If you use up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having RIM do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
http://us.blackberry.com/support/programs/technical/incident.jsp
Note, however, that this process will start with a fee...
If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lync CAL for contracts

Hello There,
My client wishes my organization (external vendors) to use MS Lync. We haven't rolled it out because we don't fully understand how the license works.
The purchasing department of the Organization got MS Lync for the entire organization. My clients are one of the departments of the organization (but not the purchasing wing). My clients would like us (external vendors) to us MS Lync 2010 via
their Outlook and their Lync servers. From their network we are in their Outlook Mail server but physically located somewhere else.
Is my company (the external vendors) allows to use the licenses of my client organization in this manner?
Thanks

If they want you to use a Lync account on their system and on their servers, they would need to purchase a CAL for you. If they want you to communicate with them via federated communications, where you're logged into a Lync server belonging to your
organization, then you would need to supply the Lync CAL and Lync server license.
It's somewhat of an odd scenario and it may not be in here specifically, but the Lync licensing guide can be found here: http://aka.ms/tnydo0
If there are concerns, I'd reach out to your Microsoft representative.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

My iPhone won't allow me to scan for any network and won't even pick up on any wifi networks near by. How do I fix this?

My iPhone 4s won't allow me to scan for any networks and won't even pull up wifi networks near by. How do I fix this?

Settings > General > Network > Reset Network Settings.
If that does not resolve the issue...
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Where is the hyphen (-) on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

Where is the hyphen on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

A few options to try:
They hyphen should be next to the + on the character map.
If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
Change your network password so it does not use a hyphen
Good luck!

Number of CAL for my network

Similar Messages

Maybe you are looking for