Number of user sessions / each session time
Hi,
I need to find out the following info
1) Then number of user sessions and for each session duration for every user..
is there a way to compute the same (if it's not directly available)..
so basically at J2EE Session level how do i find out for each user what was the session time.
Any pointers will be greatly appreciated.
Regard,s
Sam
You can find some information within the NWA - Monitoring - Java Systems Report - report: User activities...
Regards
Timm
Similar Messages
-
We have a Windows service that monitors for process start events and sends notifications to client applications.
We have discovered that the delay between when a process starts and when our EventArrivedEventHandler is called gets excessively long when the number of user sessions on the Windows server gets to about 80.
The delay gets worse as the number of user sessions gets higher.
The delays are not consistent. Even with 100 sessions some observed delays are short but most are too long and the maximum observed delay grows with the number of sessions.
Here is one example of the delay we are seeing.
A client application wrote its first log record to its log file at 11:05:34.076. Our EventArrivedEventHandler did not get notified of the process start event for the client application until 18 seconds later (at 11:05:52.188 ).
We need the delay to be less than 5 seconds to be tolerable and would like the delay to be less than 3 seconds if possible.
Is there something we can do to reduce the delay? Below are the details of our use of WMI.
We are using an instance of class WqlEventQuery to represent a WMI event query in WQL format.
We are constructing an instance of ManagementEventWatcher to consume events asynchronously.
Below is how we are instantiating and running the query. Variable m_PollingIntervalInMilliseconds is set to 1000 by default.
WqlEventQuery query = new WqlEventQuery("__InstanceCreationEvent", new TimeSpan(0, 0, 0, 0, m_PollingIntervalInMilliseconds), "TargetInstance isa \"Win32_Process\"");
m_ManagementEventWatcher = new ManagementEventWatcher(query);
m_ManagementEventWatcher.EventArrived += new EventArrivedEventHandler(managementEventWatcher_EventArrived);
m_ManagementEventWatcher.Start();
Our Windows service is not the only user of WMI services on the server. I do not know if there is contention with other users of WMI services or if there is something about the way we are consuming WMI services that is inefficient.Hello RossAtWFMC,
It seems that the services are working with a complex environment, and currently, we do not have such an environment which could reproduce this issue you described. Anyway, I would like to share whatever I found and some suggestions about this issue:
>> called gets excessively long when the number of user sessions on the Windows server gets to about 80.
The delay gets worse as the number of user sessions gets higher.
This seems to show that the issue is related with the number of user sessions, it may be that when with lots of user sessions, there are something additional delay the event to be fired. As you mentions, there are other services on that server machine, if
possible, you could make a test to run your WIM service only to see if it is still delayed.
>> Is there something we can do to reduce the delay?
I suggest that you could check this blog below which provide a way to debug with the .NET course code:
http://blogs.msdn.com/b/dotnet/archive/2014/02/24/a-new-look-for-net-reference-source.aspx
So that you could know which method inside costs most time.
From your provided code, it is not very clear if you use multi threads in your service, if not and your event handler is short, you could have a try with it, and there is a discussion about this topic:
https://social.msdn.microsoft.com/Forums/en-US/13f30e33-7f61-498e-a91a-ef982a63453c/event-handling-in-multithreaded-apps?forum=netfxbcl
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I want to know how to know or calculate the user session time till now from the time when user got connected
in simple current_time-begin_time.
thanks in advanceTry using the logon_time of v$session
test@>desc v$session;
Name Null? Type
LOGON_TIME DATE All columns of the view have not been displayed.
Adith -
Ise 1.2.1 User session time limit?
Is it possible to set a dot1x user to have a time limited session?
Scenario is a wireless PEAP client connects to a wlc controlled access point
Management wants that session to last no longer than 10 minutes and then is disconnected and not automatically reconnected.
Must use native supplicant.
I can't think of a way to fill all the requirements, anyone have ideas?Configure Session timeout over WLC
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001101.pdf -
Number of user sessions in the Application Server for a config entry
Hi All
I am using 10g AS, with 9i DB.
My requirement is that -
i need to find the total number of users of the application in any moment, and to
display that information to the users. say, config=abc, super users need to find all
those who are using the link from the application itself.
I can see that information from the 10 g Enterprise Manager -> Forms -> User Sessions.
But is there any means of transfering that information to forms.
Can this be done by using PJC's ?
Please post your solutions/suggestions
Thanks in Advance
DeepaAny help/ideas Please
Deepa -
How to set per user session time out.
Hi folks,
I am trying to set longer session time out to selective users with the following line, but it turns out setting this time out for the whole app. Is there a way to change the session time out per user only?
request.getSession(true).setMaxInactiveInterval(172800);
BillyWell, there's the rub. If you want more control over session handling, you have to take the good with the bad. My suggestion is to use a good open source caching solution and let the cache evict entries for you. You should be able to specify both an interval over which data goes stale and/or the maximum size you want the cache to reach. Really, a session is just a specialized form of caching anyway.
http://java-source.net/open-source/cache-solutions
- Saish -
What is parameter for total number of user sessions for entire SAP system
Is there a profile parameter that limits total number of SAP user connections to that system. Im not talking about rdsip/max_alt_modes that limits number of sessions for particular user but a parameter that limits user connections to total number of users logging into particular system. I heard tht there is parameter that has default value 90, i want to change it but dont know whats the paramter name..plzz help me in this regard to proceed further.
Thank youHi,
Use ST03/ST03N to check the number of users logged in.
Use RZ10 to change the parameters
Rakesh -
Obtaining number of users/sessions
Hi, I have an OAS instance, is there a way to obtaining the number of sessions/users in a specified period of time?
We need to obtain son use application statistics, thanks in advance.If you mean for OAS, you can go to WebCache and HTTP page in EM console to see in real time the amount of active sessions, active request and other things.
As well you can use dms tool for this, this is a monitorin tool that help getting a lot of metrics from the server, look in the admin guide to learn how to use it.
Greetings -
Multipoint for Libraries - user session time limit?
We are getting a Multipoint Server system for our small local public library. We will be using this system for Public Access workstations. We would like to limit the amount of time a patron can use a workstation before the workstation is logged out. By limiting
the amount of time, we provide equitable access to all patrons. Can Multipoint Server be configured to provide auto-logoff after a certain amount of time? If not, what other solutions are there that can provide this timer feature? Optimally, we would like
the patron to be notified a few minutes before the auto logoff so he/she can save their work.We use an open source application called Cybera. It is no longer being developed, and you do need to be a bit techie to customize it the way you want it. I am running catalog computers on Multipoint 2011, and getting ready to put our internet
computers on Multipoint 2012. So far I've verified that Cybera works on Multipoint 2011. Let me know if you want more information.
Dover NH Public Library
Peggy Thrasher -
How to accept more concurrent user sessions
Hi all,
Which parameters are directly responsible for number of user
sessions.Precisely which parameters are to change to accept more number of
users sessions.If you could suggest some value for those parameter to
accept 1000 user sessions ..it would be helpful.
regds,
ADHi,
PROCESSES = User processes
SESSIONS = Max no. of user and system sessions
TRANSACTIONS = Max. number of concurrent active transactions
These parameters should change in init.ora
Regds,
Thomas. -
Session Time Out For UNLOGGED IN USER During Search -pls help SIR!
Hi,
The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
The problem is that -
When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
Then I click on one of the file from within the search result and visit the file.
Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
package com.mgh.sps.search.web.handler;
import java.util.Map;
import java.util.regex.Pattern;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.log4j.Logger;
import org.springframework.validation.BindException;
import org.springframework.validation.Errors;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.SimpleFormController;
import com.mgh.sps.search.business.facade.Search;
import com.mgh.sps.common.dto.ResourceDTO;
import com.mgh.sps.common.util.SessionAttributeKey;
import com.mgh.sps.common.util.SessionManager;
import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
public class SearchResultsController extends SimpleFormController {
* SearchResults Controller
* @author Muralikrishna.s
* @Codedondate DD-MM-YY=26-07-07
* @Usecase/s associated =UC504
private static final Logger logger = Logger
.getLogger(SearchResultsController.class.getName());
private final static String REG_EXP = "^[A-Za-z0-9]*$";
private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
* Spring framework method used to hold reference data
* @param request
* HttpServletRequest
* @param command
* Object
* @param arg2
* Errors
* @return Map
* @throws Exception
@Override
protected Map referenceData(HttpServletRequest request, Object command,
Errors errors) throws Exception {
logger.debug("SearchResultsController.referenceData() method entered:"
+ request + "," + command + "," + errors);
SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
FileUsageWebConstants.TAB_SEARCH, request);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
ResourceDTO resourceDto = (ResourceDTO) command;
String[] allValues = new String[7];
if (null != (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request)) {
allValues = (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request);
resourceDto.setKeywords(allValues[0]);
resourceDto.setCountry(allValues[1]);
resourceDto.setUniversityName(allValues[2]);
resourceDto.setSubjectArea(allValues[3]);
resourceDto.setQualification(allValues[4]);
resourceDto.setYearLevel(allValues[5]);
resourceDto.setSpecificType(allValues[6]);
logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
+ resourceDto.getQualification());
String flag = (String) request.getParameter("id");
resourceDto.setFlag(flag);
logger.debug("SearchResultsController.referenceData() method exited:");
return search.retrieveReferenceData(resourceDto);
* Spring framework method used to hold OnSubmit
* @param request
* HttpServletRequest
* @param response
* HttpServletResponse
* @param command
* Object
* @param arg3
* BindException
* @return ModelAndView
* @throws Exception
@Override
protected ModelAndView onSubmit(HttpServletRequest request,
HttpServletResponse response, Object command, BindException errors)
throws Exception {
SessionManager.cleanup(request);
logger.debug("SearchResultsController.onSubmit() method entered:"
+ request + "," + command + "," + response + "," + errors);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
Map dynamic = (Map) getServletContext().getAttribute("config");
ResourceDTO resourceDto = (ResourceDTO) command;
SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
request);
//changed by sreelatha on sep21
//resourceDto.setKeywords(request.getParameter("keywords"));
//String key = request.getParameter("keywords");
//logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
String keywords = (request.getParameter("keywords"));
if(null!=keywords) {
keywords = keywords.trim();
resourceDto.setKeywords(keywords);
// changes end
resourceDto.setUniversityName(request.getParameter("universityName"));
resourceDto.setSubjectArea(request.getParameter("subjectArea"));
resourceDto.setCountry(request.getParameter("country"));
resourceDto.setQualification(request.getParameter("qualification"));
resourceDto.setYearLevel(request.getParameter("yearLevel"));
resourceDto.setSpecificType(request.getParameter("specificType"));
String[] allValues = new String[7];
//changed by sreelatha on sep21
//allValues[0] = request.getParameter("keywords");
allValues[0] = resourceDto.getKeywords();
//changes end
allValues[1] = request.getParameter("country");
allValues[2] = request.getParameter("universityName");
allValues[3] = request.getParameter("subjectArea");
allValues[4] = request.getParameter("qualification");
allValues[5] = request.getParameter("yearLevel");
allValues[6] = request.getParameter("specificType");
SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
allValues, request);
if(null!=keywords) {
keywords = keywords.trim();
String words="";
for(int i=0;i<keywords.length();i++) {
String key=String.valueOf(keywords.charAt(i));
if(key.contains("*")) {
key = key.replace("*"," ");
} else if(key.contains("?")) {
key = key.replace("?"," ");
} else if(key.contains("[")) {
key = key.replace("["," ");
} else if(key.contains("{")) {
key = key.replace("{"," ");
} else if(key.contains("(")) {
key = key.replace("("," ");
} else if(key.contains(")")) {
key = key.replace(")"," ");
} else if(key.contains("+")) {
key = key.replace("+"," ");
} else if(key.contains("
key = key.replace("
} else if(key.contains(" ")) {
key = key.replace(" "," ");
} else if(key.contains("_")) {
key = key.replace("","");
} else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
key = key.replaceAll(key," ");
words = words + key;
keywords = words;
resourceDto.setKeywords(keywords);
SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
String flag1 = request.getParameter("id");
String status="";
if (flag1 !=null && flag1.equals("loggedInUser"))
if(name==null)
return new ModelAndView();
if (flag1 !=null && flag1.equals("loggedInUser")){
status = "redirect:SearchResults.htm?id=loggedInUser";
}else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
super.setSuccessView(status);
ModelAndView mav = new ModelAndView(super.getSuccessView());
logger.debug("SearchResultsController.onSubmit() method exited:");
return mav;
}Cross-posted in many forums. Don't answer this one.
-
Session Time Out For UNLOGGED USER During Search -pls help
Hi,
The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
The problem is that -
When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
Then I click on one of the file from within the search result and visit the file.
Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.
SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
package com.mgh.sps.search.web.handler;
import java.util.Map;
import java.util.regex.Pattern;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.log4j.Logger;
import org.springframework.validation.BindException;
import org.springframework.validation.Errors;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.SimpleFormController;
import com.mgh.sps.search.business.facade.Search;
import com.mgh.sps.common.dto.ResourceDTO;
import com.mgh.sps.common.util.SessionAttributeKey;
import com.mgh.sps.common.util.SessionManager;
import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
public class SearchResultsController extends SimpleFormController {
* SearchResults Controller
* @author Muralikrishna.s
* @Codedondate DD-MM-YY=26-07-07
* @Usecase/s associated =UC504
private static final Logger logger = Logger
.getLogger(SearchResultsController.class.getName());
private final static String REG_EXP = "^[A-Za-z0-9]*$";
private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
* Spring framework method used to hold reference data
* @param request
* HttpServletRequest
* @param command
* Object
* @param arg2
* Errors
* @return Map
* @throws Exception
@Override
protected Map referenceData(HttpServletRequest request, Object command,
Errors errors) throws Exception {
logger.debug("SearchResultsController.referenceData() method entered:"
+ request + "," + command + "," + errors);
SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
FileUsageWebConstants.TAB_SEARCH, request);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
ResourceDTO resourceDto = (ResourceDTO) command;
String[] allValues = new String[7];
if (null != (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request)) {
allValues = (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request);
resourceDto.setKeywords(allValues[0]);
resourceDto.setCountry(allValues[1]);
resourceDto.setUniversityName(allValues[2]);
resourceDto.setSubjectArea(allValues[3]);
resourceDto.setQualification(allValues[4]);
resourceDto.setYearLevel(allValues[5]);
resourceDto.setSpecificType(allValues[6]);
logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
+ resourceDto.getQualification());
String flag = (String) request.getParameter("id");
resourceDto.setFlag(flag);
logger.debug("SearchResultsController.referenceData() method exited:");
return search.retrieveReferenceData(resourceDto);
* Spring framework method used to hold OnSubmit
* @param request
* HttpServletRequest
* @param response
* HttpServletResponse
* @param command
* Object
* @param arg3
* BindException
* @return ModelAndView
* @throws Exception
@Override
protected ModelAndView onSubmit(HttpServletRequest request,
HttpServletResponse response, Object command, BindException errors)
throws Exception {
SessionManager.cleanup(request);
logger.debug("SearchResultsController.onSubmit() method entered:"
+ request + "," + command + "," + response + "," + errors);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
Map dynamic = (Map) getServletContext().getAttribute("config");
ResourceDTO resourceDto = (ResourceDTO) command;
SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
request);
//changed by sreelatha on sep21
//resourceDto.setKeywords(request.getParameter("keywords"));
//String key = request.getParameter("keywords");
//logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
String keywords = (request.getParameter("keywords"));
if(null!=keywords) {
keywords = keywords.trim();
resourceDto.setKeywords(keywords);
// changes end
resourceDto.setUniversityName(request.getParameter("universityName"));
resourceDto.setSubjectArea(request.getParameter("subjectArea"));
resourceDto.setCountry(request.getParameter("country"));
resourceDto.setQualification(request.getParameter("qualification"));
resourceDto.setYearLevel(request.getParameter("yearLevel"));
resourceDto.setSpecificType(request.getParameter("specificType"));
String[] allValues = new String[7];
//changed by sreelatha on sep21
//allValues[0] = request.getParameter("keywords");
allValues[0] = resourceDto.getKeywords();
//changes end
allValues[1] = request.getParameter("country");
allValues[2] = request.getParameter("universityName");
allValues[3] = request.getParameter("subjectArea");
allValues[4] = request.getParameter("qualification");
allValues[5] = request.getParameter("yearLevel");
allValues[6] = request.getParameter("specificType");
SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
allValues, request);
if(null!=keywords) {
keywords = keywords.trim();
String words="";
for(int i=0;i<keywords.length();i++) {
String key=String.valueOf(keywords.charAt(i));
if(key.contains("*")) {
key = key.replace("*"," ");
} else if(key.contains("?")) {
key = key.replace("?"," ");
} else if(key.contains("[")) {
key = key.replace("["," ");
} else if(key.contains("{")) {
key = key.replace("{"," ");
} else if(key.contains("(")) {
key = key.replace("("," ");
} else if(key.contains(")")) {
key = key.replace(")"," ");
} else if(key.contains("+")) {
key = key.replace("+"," ");
} else if(key.contains("\\")) {
key = key.replace("\\"," ");
} else if(key.contains(" ")) {
key = key.replace(" "," ");
} else if(key.contains("_")) {
key = key.replace("_","_");
} else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
key = key.replaceAll(key," ");
words = words + key;
keywords = words;
resourceDto.setKeywords(keywords);
SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
String flag1 = request.getParameter("id");
String status="";
if (flag1 !=null && flag1.equals("loggedInUser"))
if(name==null)
return new ModelAndView();
if (flag1 !=null && flag1.equals("loggedInUser")){
status = "redirect:SearchResults.htm?id=loggedInUser";
}else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
super.setSuccessView(status);
ModelAndView mav = new ModelAndView(super.getSuccessView());
logger.debug("SearchResultsController.onSubmit() method exited:");
return mav;
}Cross-posted in many forums. Don't answer this one.
-
html:select : put each collection of country names in each user session?
Hi,
I have different <html:select> elements in my JSP. The options are filled with collections (country list, city list...).
What is the best way to do for country for example? To retrieve all the country name from the database, put it in a arrayList for EACH user session. Or, put it in an application element?If it's not going to change for users, I'd store it in the application scope. No point to having multiple copies of the same information.
-
Can we define different session time-outs for different user types in the DD?
Hello,
Do you know a way to specify different session time-outs in deployment
descriptor for different users/roles?
For example:
Role-A should be invalidated after 10 minutes
Role-B should be invalidated after 100 minutes
Shortly, I would be grateful if you can help,
Fehmi."Fehmi" <[email protected]> wrote in message
news:3f50fb75$[email protected]..
>
Hello,
Do you know a way to specify different session time-outs in deployment
descriptor for different users/roles?
For example:
Role-A should be invalidated after 10 minutes
Role-B should be invalidated after 100 minutes
I don't believe you can timeout a session based on a user or a role. I think
you can just specify when
all sessions timeout (via the session descriptor). But, you may want to ask
in the weblogic.developer.interest.servlet newsgroup. -
ACSE - Max. number of simultaneous sessions for a given user?
Hi,
I know in the ACSE one can limit the number of simultaneous sessions for a given user; but is there a maximum number of sessions any one user can have open if they aren't specifically limited? (i.e. - Is there anything to prevent one user from having, say 50 sessions open?)
Thanks,NickHi Nick,
ACS only provide authentication (and authorization and accounting) services with various ability like limiting LOGIN sessions to/through a device, controlling what command to execure (tacacs+) and so on.
However, I don't think ACS has the ability to limit how many sessions can be opened/established from a client to a server or application. This should be controlled by either by the servers or applications.
A device like firewall (PIX/ASA) can only limit connection to a server, but not from a device.
Rgds,
AK
Maybe you are looking for
-
UME with ABAP AS and LDAP Datasource
Hello SDN´s We have tried very hard for the last days configuring the ume-xml for the following scenario: - LDAP is used to authenticate the user - AS ABAP is used to store the roles of the user (because they automatically becomes groups in t
-
Condition Period Problem in Sales order - Need help
Hi Gurus I am testing Sales Order back dated Condition period Problem in Sales order example for you to understand Sales Order where PO date is 17.12.2007 Del Date & Price date is 13.02.2008 Then it is not calculating IN: A/R BED %IN A/R BED totalN A
-
Hidden shares for specific users
Hi, I've been computer admin for years but please forgive my ignorance because I'm new to Mac Server. I am using 10.5.6 server on a PPC dual G5. All clients are 10.5.6. I am trying to setup hidden network folders that only specific users can access.
-
I have just upgraded my mac book pro to Yosemite and it is rubbish as my Mac book pro now runs extremely slow and despite my having ad blocker enabled ads keep popping up everywhere. How do I revert back to mavericks os?
-
Rebuild Library from Scratch without losing what I bought
How can I rebuild my library from scratch without losing what I have already bought? I recently upgraded my system drive to a 1TB drive and all the drive letters changed. I had moved my library off of the system drive and I do not remember what the d