NumberFormatException while Updation using MDM4J
Hi All,
We are trying to perform Update functionality using MDM4J APIs, but not able to move furthur as we are getting an exception in the code.
Following is the code we are using:
try {
A2iFields a2iFields = new A2iFields();
A2iField statusField = new A2iField("Current_Status");
Value statusVal = new Value(wdContext.currentVn_Status_changeElement.getVa_Changed_Curr_status());
statusField.SetValue(statusVal);
a2iFields.Add(statusField);
A2iField SubstatusField = new A2iField("Current_SubStatus");
Value SubstatusVal = new Value(wdContext.currentVn_Status_changeElement ().getVa_Changed_SubSts());
SubstatusField.SetValue(SubstatusVal);
a2iFields.Add(SubstatusField);
A2iField ProstatusField = new A2iField("Proposal_status");
Value ProstatusVal = new Value(wdContext.currentVn_Status_changeElement().getVa_Changed_Curr_status());
ProstatusField.SetValue(ProstatusVal);
a2iFields.Add(ProstatusField);
A2iField ProSubstatusField = new A2iField("Proposal_SubStatus");
Value ProSubstatusVal = new Value(wdContext.currentVn_Status_changeElement().getVa_Changed_SubSts());
ProSubstatusField.SetValue(ProSubstatusVal);
a2iFields.Add(ProSubstatusField);
A2iIntArray recIds = new A2iIntArray();
int recID = wdThis .wdGetCO_Resource_Availibility_CheckController() .getRecordID(
"Resource_Availibility_Check","Satyam_ID",associateID);
recIds.Add(recID);
ResultSetDefinition rsd = new ResultSetDefinition("Resource_Availibility_Check");
A2iResultSet rs = catalog.GetRecordsById(rsd, recIds);
int updateResult = catalog.UpdateRecord("Resource_Availibility_Check",
recID,rs.GetChangeStampAt(0),a2iFields);
On executing getting the following exception:
java.lang.NumberFormatException: For input string: "Others"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:468)
at java.lang.Integer.parseInt(Integer.java:518)
at a2i.core.Value.ConvertToType(Unknown Source)
at com.a2i.xcat.internal.conversion.StructsToStructsUtil.ConvertFieldsToModifiedFields(Unknown Source)
at a2i.common.CatalogData.UpdateRecord(Unknown Source)
at a2i.common.CatalogData.UpdateRecord(Unknown Source)
at com.satyam.rf.rac.view.VW_Associate_Selection.onActionShadow(VW_Associate_Selection.java:2032)
Line 2032 is teh line of the UpdateRecord method.
Please suggest what could be the problem in this code.
Thanks in Advance,
Becky.
Hi Becky,
Issue seems to be with the below code:
A2iIntArray recIds = new A2iIntArray();
int recID = wdThis .wdGetCO_Resource_Availibility_CheckController() .getRecordID(
"Resource_Availibility_Check","Satyam_ID",associateID);
recIds.Add(recID);
I think you must initialize an int array and put the record Id at index 0 and then try adding.
You can also try commenting the above code and then try to update the record.
Cheers,
Arafat
Similar Messages
-
Error While updating Process form data Using Scheduler
Hi All,
I am trying to update Process form data (ex : lastname) using a scheduled task Code. I am getting Error while updating Field.
Code :
HashMap<String, String> map = new HashMap<String, String>();
map.put("UD_EBS_PF_LASTNAME", "lastname");
formintf.setProcessFormData(instancekey, map); //I AM GETTING AT THIS LINE
Saying
Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl_1036_WLStub.setProcessFormDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.setProcessFormDatax(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy3.setProcessFormData(Unknown Source)
at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.execute(AssignRandomPasswordToAllUsersSchedulerTest.java:182)
at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.main(AssignRandomPasswordToAllUsersSchedulerTest.java:63)
Caused by: Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:761)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)Is that possible there was the field ZDATE in your form interface/ context and now it is not? I guess some source has changed so the field in the form (binding to the not existing field) cannot be processed. Otto
-
Error while updating order - even after using recommended format
Used below while updating order:
1) Transaction
2) Synchronization
still getting below error:
Caused by: atg.service.pipeline.RunProcessException: An exception was thrown from the context of the link named [updatePriceInfoObjects].
at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:393)
at atg.service.pipeline.PipelineChainContext.runProcess(PipelineChainContext.java:207)
at atg.service.pipeline.PipelineManager.runProcess(PipelineManager.java:475)
at atg.commerce.pipeline.CommercePipelineManager.runProcess(CommercePipelineManager.java:123)
at atg.commerce.order.OrderManager.updateOrder(OrderManager.java:2905)
... 64 common frames omitted
Caused by: atg.commerce.CommerceException: Saving order 818320012 failed because doing so would result in data being overwritten. This save attempt had an out of date repository item [pricingAdjustment].
at atg.commerce.order.processor.ProcSavePriceInfoObjects.writeProperties(ProcSavePriceInfoObjects.java:1428)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePricingAdjustments(ProcSavePriceInfoObjects.java:1316)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1185)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveShippingItemsSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1076)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePriceInfo(ProcSavePriceInfoObjects.java:1052)
at atg.projects.store.order.processor.StoreProcSavePriceInfoObjects.savePriceInfo(StoreProcSavePriceInfoObjects.java:101)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveOrderPriceInfo(ProcSavePriceInfoObjects.java:807)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.runProcess(ProcSavePriceInfoObjects.java:716)
at atg.service.pipeline.PipelineLink.runProcess(PipelineLink.java:255)
at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:365)
... 68 common frames omitted
Caused by: atg.repository.ConcurrentUpdateException: no rows updated oldVersion=1 for item=pricingAdjustment:pa5090009 in GSATransaction=atg.adapter.gsa.GSATransaction@2c6042ec thread=[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' transaction=Xid=BEA1-439B3F1AD2C4DD758FA4(744502646),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=3600,activeThread=Thread[[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads],XAServerResourceInfo[ATGProductionDS_atgdv02g3]=(ServerResourceInfo[ATGProductionDS_atgdv02g3]=(state=started,assigned=none),xar=ATGProductionDS,re-Registered = false),SCInfo[atgdv02g3+ss_ps01]=(state=active),local properties=({weblogic.jdbc.jta.ATGProductionDS=[autoCommit=true,enabled=true,isXA=true,isJTS=false,vendorID=0,connUsed=true,doInit=false,'null',destroyed=false,poolname=ATGProductionDS,appname=null,moduleName=null,connectTime=38,dirtyIsolationLevel=false,initialIsolationLevel=2,infected=false,lastSuccessfulConnectionUse=1384308810784,secondsToTrustAnIdlePoolConnection=10,currentUser=null,currentThread=null,lastUser=null,currentError=null,currentErrorTimestamp=null,JDBC4Runtime=true,supportStatementPoolable=true,needRestoreClientInfo=false,defaultClientInfo={},supportIsValid=true]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=ss_ps01+devrdatgap138.dev.nintendo.com:10180+atgdv02g3+t3+, XAResources={ATGPublishingDS_atgdv02g3, WLStore_atgdv02g3__WLS_ss_ps01, ATGSwitchingDS_A_atgdv02g3, ATGSwitchingDS_B_atgdv02g3, WSATGatewayRM_ss_ps01_atgdv02g3, ATGAgentDS_atgdv02g3, ATGProductionDS_atgdv02g3},NonXAResources={})],CoordinatorURL=ss_ps01+devrdatgap138.dev.nintendo.com:10180+atgdv02g3+t3+)
at atg.adapter.gsa.GSAItemDescriptor.updateItem(GSAItemDescriptor.java:7507)
at atg.adapter.gsa.GSARepository.updateItem(GSARepository.java:1075)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.writeProperties(ProcSavePriceInfoObjects.java:1424)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePricingAdjustments(ProcSavePriceInfoObjects.java:1316)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1187)
at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveShippingItemsSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1077)
... 74 common frames omittedUpdate your Order with the pattern suggested by Devon, here is the link
Design Pattern for Updating an ATG Order | Devon Hillard&#039;s Digital Sanctuary -
Error while updating the Assignment details using 'hr_assignment_api'
An exception message is thrown while updating the assignment details through 'hr_assignment_api.update_emp_asg'.
The message is 'ORA-20001: HR_FLEX_VALUE_MISSING: N, COLUMN, ASS_ATTRIBUTE6, N, PROMPT'.
Even though a valid value is being passed to the segement,the error is thrown.
I have tested the API in one instance and it is working fine. Recently I have migrated the codes to nother instance and encountered this error. The only difference is that in the newer instance, the segment is mandatory.
One interesting thing is that, When I update the Assignment through application it is successfully saving the record. Then if I use the API to correct the Assignment, it is working fine. The API is not able to update only when the mandatory segment is null.
Please help
Thanks in advance
KumarPl post details of OS, database and EBS versions, along with HR RUP level. It may be a bug, as outlined in MOS Doc 429169.1 (When Calling the Assignment API To Update Position, It Errors in Required Segment)
HTH
Srini -
Error while updating data using session and call transaction method
Hi all,
i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
thanks and regards.hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
MATNR LIKE RMMG1-MATNR,
MBRSH LIKE RMMG1-MBRSH,
MTART LIKE RMMG1-MTART,
MAKTX LIKE MAKT-MAKTX,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
BISMT LIKE MARA-BISMT,
EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6 R ROH MATSUDHU " 001 7890 AA
i did the same.but i didn't get any error. -
My apps are not updating as I have no longer access to my eariler apple Id and now I am using a new apple Id which is allowing to download apps but while updating those apps my iPod wants eariler apple Id password to update what should I do ?
Hi Kanishk,
Those apps are forever tied to the Apple ID they were purchased under. You can either delete them and re-purchase them, or you can go to Manage your Apple ID and reset the password on the old Apple ID so you can use it to update your apps: Apple - My Apple ID
If you decide to continue to use them under the old ID password, I would suggest that when you reset that password, you change it to be the same password as the one you are currently using. That way when apps need to be updated you will only need to know one password and you won't have to be concerned with which Apple ID is displaying.
Cheers,
GB -
CIN: Items are not displayed while updating the RG1 Register using T Code:
Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
ChandraHi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna -
Unknown error while updating module use!
I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
Any advice?Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
C. -
Can't use the camera function in my ipod touch 4s while updated to iOS 6.0
I can't use the camera function in my ipod touch 4s while updated to iOS 6.0.
There is all black screen when I turn on my camera.
I open the restriction setting already.
thank you.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Problem while updating Item category using Bapi_salesorder_change
Hi,
Iam facing a probelm while updating item category using bapi Bapi_salesorder_change
In the Return table iam getting the folowing mesages.
Inforation mesage : Field 'PSTYV' cannot be changed, VBAPKOM 000010 ready for input
Error Message : Item 000010 cannot be processed.
Please find the code below
CLEAR wa_bapisdh1x.
wa_bapisdh1x-updateflag = 'U'.
CLEAR wa_order_item_inx.
wa_order_item_inx-itm_number = wa_vbap-posnr.
wa_order_item_inx-item_categ = 'X'.
wa_order_item_inx-UPDATEFLAG = 'U'.
APPEND wa_order_item_inx TO it_order_item_inx.
CLEAR wa_order_item_inx.
CLEAR wa_order_item_in.
wa_order_item_in-itm_number = wa_vbap-posnr.
wa_order_item_in-item_categ = 'ABC'.
APPEND wa_order_item_in TO it_order_item_in.
CLEAR wa_order_item_in.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = w_vbeln
order_header_inx = wa_bapisdh1x
TABLES
return = it_return
order_item_in = it_order_item_in
order_item_inx = it_order_item_inx
How can i correct it..
Regards
KumarActually iam facing a strange problem here.
When i copy the program into another sample program and execute it iam able to change both the item catgegory and delivery block for particular sales order and item number.
But in my main program i have BDC for MB1B transaction to create the material document.
Once the material document is created succesfully iam using BAPI Sales_order_change to change the item category and delivery block..
In my main program iam not to change the item catgeory getting an error field PSTYV cannot be changed.
But the same code is running percfectly in the copied one..
How can i correct that..
Regards
Kumar -
Getting error message while updating Job attributes using PP03 for IT1641
Hey Guys,
We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
Thanks...
Edited by: Karan Gheewala on Apr 3, 2008 9:06 PMSolved using Note 123383 - WC: Customizing worker's compensation tables
Thanks,.. -
Error while updating CE 7.11 to 7.2 using CEUPDATEMANAGER
While updating the CE server from 7.11 to 7.2 got the error in Define parameter stage
ERROR 2011-08-23 16:11:53.281 [sixxcstepexecute.cpp:988]
FCO-00011 The step askJDBCDriver with step key |CE_UpdateManagementService|ind|ind|ind|ind|0|0|CE_getNewJDBCDriver|ind|ind|ind|ind|2|0|CE_getNewJDBCDriverORA|ind|ind|ind|ind|0|0|askJDBCDriver was executed with status ERROR ( Last error reported by the step :TypeError: path[0] has no properties (in script CE_UpdateManagementService|ind|ind|ind|ind, line 80726: ???)).
ERROR 2011-08-23 16:11:52.687 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: path[0] has no properties (in script CE_UpdateManagementService|ind|ind|ind|ind, line 80726: ???)
my DB is online and system is up and i have retried the phase once again but getting the same error.
Please help me to get through thisHi Bernd,
Is the DB down? You can check it with the DB Manager client tool if the DB is online or offline.
Rgds,
Soujanya -
Error While updating info in the People Form-Additional Personla Details
Hi All,
Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
Error Like:
APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure per_htrca_merge_tca_person at step10.
Please contact your support represntative.
Thanks -
SowmyaThanks you,
By this Note id:395136.1
Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
with this Note id:278422.1
We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
we are using applications 11i.
please help to find this Profile option.
But with this note id:ID 395136.1
This is Working.
Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
Thanks for the Support-
Sowmya.
Edited by: user13419037 on Aug 11, 2011 11:53 PM
Edited by: user13419037 on Aug 12, 2011 12:03 AM
Edited by: user13419037 on Aug 12, 2011 3:45 AM -
Error while updating account dim
I get the below error while updating the Outline Account Dim.This error occurs only when updating account dim. It does not happen with other dimensions. So it doesn't seem to be the connection being down. If we recycle the analytics server. But we are not able to find out the actual cause for this issue.
Error message:
Cannot build dimension. Analytic Server Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again
Additional information
Account is defined as dense dimesion with 1800 level 0 members. We are updating this using rules file.
Potential Number of Data Blocks : 27762609853440
Number of Existing Data Blocks : 2625360
Index Cache: 40960
Data cache : 20480
I appreciate any help in resolving this issueThere is probably something in your dim build source file that Essbase doesn't like and isn't giving you a good error message. Did this dim build work in the past and you recently added something to it?
Try excluding certain columns like member properties and data storage just to see if you can get the members to load. Then slowly bring back in the other columns to see if you find the one that has the problem. Similarly try keeping all the columns but just try loading one record and see if it succeeds, this will help you start to narrow down if it is a load rule or source issue. Other option is to create a new load rule, perhaps there is something wrong with the one you are using.
Unfortunately there is no magic bullet here, you just have to work through small samples to try and isolate what the problem is. -
Error while updating DocumentDefinition AIP-11052:Writing following objects
Hi All,
I am getting this error while updating ecs in Document Definition. I was able to do it properly on the same environment a few weeks back but now its throwing an error:
Error -: AIP-11052: Writing following objects: Document Definition failed due to following constraint violation: DOCUMENTDEFINITION. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION
I read in some of the OTN forums that this may be an environment issue. So i restarted the B2B server as suggested but the error seems to still exist.
Kindly reply how to proceed. Its little critical.
Thanks in advance.Make sure there is no agreement in deployed/validated state which is using this document definition. Retire and purge all existing configurations which are using this doc def and make sure there is no agreement in validated state. If there is an agreement in validated state and then change/just update anything in agreement and save it to bring it back into draft state.
Regards,
Anuj
Maybe you are looking for
-
I purchased a game name Einstein and I can't see it , it doesn't show up in the menu!?
-
Java 5, AWT in headless mode and X11 Libraries
Hi All, In Java 5, does AWT still require X11 libs to be present (not running or started) when using AWT in headless mode ? What level of grahpics (non GUI) activities can you perform with Java 5 and AWT in headless mode. Cheers
-
Shipping notification delivery date 1970
Hi, For few shipping notifications we see in MD04 the delivery date as 01.01.1970 . How this date is generated for a current shipping notification? Thanks, shan
-
Have to prevent navigation to another stacked canvas.
Dear all, I am developing an application using forms 6i with oracle 10g.i have many stacked canvas in this application.where in one particular canvas i have a button namely 'SUBMIT' in which i have a trigger when-button-pressed with following code. g
-
hi all, i need your help. im having a problem with my program, is there a table which can display the the function module's description? pls this is urgent..i hope you can help me with this... thanks, mau