Numbers formula needed for fahrenheit to celsius

Can anyone help with the formula to convert fahrenheit temps to celsius? I need the formula and have not been able to find it/figure it out from help area of numbers.

Hi Suzanne,
Here are examples for conversion in each direction.
Upper table, B2: =(A-32)*5/9
Lower table, B2: =A*9/5+32
For results to the nearest degree, enclose either formula in ROUND(formula,0)
°F ->°C: =ROUND((A-32)*5/9,0)
°C ->°F: =ROUND(A*9/5+32,0)
Regards,
Barry
Added:
Here's an alternate pair that uses the fact that the numbers match at -40° on both scales:
°F ->°C: =((A+40)*5/9)-40
°C ->°F: =((A+40)*9/5)-40
B
Message was edited by: Barry

Similar Messages

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How do I stop Numbers formulas from converting (/) into (÷) for hyperlinks. Ref Ver. 3.5.2

How do I stop Numbers formulas from converting ( / ) forward slash into (÷) divide for hyperlinks. Ref Ver. 3.5.2
I am trying to hyperlink to a dropbox url, but the numbers formula is automatically converting / into ÷, preventing the links from working.
Thank you.

Hi Merritt.B,
If you are using HYPERLINK() everything goes inside quotes:
HYPERLINK("https://discussions.apple.com/thread/6772428","This question")
quinn

I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter

I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter #s above each section of endnotes. How do I do this, please?

I have precisely the same problem and am wondering if anyone has found a workaround for what seems to be a bug or an unattended issue in Pages. Hopefully the next update (whenever it arrives, I hope it arrives soon) will take care of this.

How can I log in to my computer? I changed language on keyboard and I shut down my computer.Now keyboard has no numbers, which I need for my pc password

Yesterday I was working on my computer and I changed English to Lithuanian language on the keyboard. I shut down my computer. Now when I want open it, I can't type correct password to access my account . There is left Lithuanian language on keybord, with has no numbers. And I need numbers to use for my password.

loretarem wrote:
There is left Lithuanian language on keybord, with has no numbers.
It does have numbers of course, they are made by first hitting the ` key (top most left most on a US keyboard) and then the usual number key. Have you tried that? Such combos often don't work in password fields, but you never know.

I bought a mac air yesterday and i was trying to download maverick but i could not do it, i try to download the old version of numbers because i needed for work, but i could not neither, but now when i check to download numbers is asking for to pay?

i bought a mac air yesterday and i was trying to download maverick but i could not do it, i try to download the old version of numbers because i needed for work, but i could not neither, but now when i check to download numbers is asking for to pay?

You are mixing different issues. I will address Numbers.
Has Numbers ever been installed on this new Mac? Did you have the Mac App Store version of Numbers or did you have the DVD version of Numbers?
You should be able to redownload a previous purchase of the Mac App Store version of Numbers from the Purchases pane after signing into your account.
If you had the DVD version, then you will need to install that from the DVD media.

I purchased Numbers and Pages for I-Pad, do I need to buy them again for my I-Mac?

I purchased Numbers and Pages for my I-Pad 2; if want them on my I-Mac do I need to buy them again?

You will have to purchase iWork (or the individual apps) for your Mac. The apps you purchased for the iPad are only for iOS.

How do you change the weather from Fahrenheit to Celsius in iPhoto for iOS?

I have been trying to change the weather from fahrenheit to celsius and I cannot seem to find out how. Can anyone help?

I had the same thing happening after upgrading to IOS 7.
I clicked on the weather notification which opened a new tab
https://www.dropbox.com/s/sai5kn3xufrqngd/IMG_0013.PNG
I just had to click on the °C to get the Celsius displayed both in the app and the notification.
Maybe a reboot would help ?

My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my com

My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my computer and load them in my LR. The photos appear but witthout any editing or tagging. We need to be able to have her working on the photos on her computer with her copy of LR and me on my computer with my version of LR being able to access what is already tagged and given back to me. This seems hard. We need advice on if it is at all possible to have two computers simultaneously working on LR . I bought her her own version because I was told at the time of purchasing that that was the only way to share. Please advise urgently! Thanks.

Sounds like your assistant isn't instructing Lightroom to write the tagging and editing to the files themselves, so wehn the files return to you, they don't have editing and tagging information. She need to select the photos in Lightroom and then Ctrl-S (Cmd-S on Mac). Or alternatively turn on the option to autmoatically write this information to the files.
If you are using RAW photos, then this information will be written to a sidecar XMP file, and your assistant must provide you with the sidecar file. If these photos are not RAW photos, then the information is written directly into the photo file itself.
Lightroom wasn't designed to be a multi-user program, and so it is truly not possible to have two people working on the same catalog at once. The way you are doing things, as modified above, is probably the way to go.
As an alternative, you can transfer (portions of) catalogs as well as photos back and forth and then all of these issues disappear, but a catalog might be rather large for a flash drive (or maybe not, it depends)

Data Validation - a feature that Numbers really needs.

Right now, the newly purchased Numbers app for iPad/iPhone is little more than a crippled document viewer for me because numbers doesn't support 'data validation' (as implemented in excel).
Its not a hard concept and likely utilized in a LOT of spreadsheets on the planet. Not supporting such a critical feature is a problem, as it makes numbers, at least for me, rather pointless as an authoring tool since I cannot change or update data in my worksheet without likely corrupting the document's data integrity.
Hopefully, someone at Apple is working on fixing this.
Given that one cannot use data validation - how do I lock down a spreadsheet so I don't accidentally change cell contents?
The fact that there is no 'undo' button on the iPhone version that I do get on the iPad (same app) makes it worse.. I'm occasionally and unintentionally dragging selections of stuff around the page really hosing up the iPhone spreadsheet.
So I need to just remember what needs to be updated, update the excel spreadsheet when I can, then delete the iWork-iCloud doc, upload the replacement, then refresh the iPhone/iPad version.. very cumbersome and not at all 'cloud-like' or usefull.
Apple developers.. are you paying attention?

Yeah I know that apple likely has the same system as Microsoft in sending general support to a forum such as this. And maybe thae same stupid moron that not paying attention to the forums if their users is a food idea.
That doesn't change the point of the issue nor that apple directs ,e here to ask said question
Written in the iPad split soft keypad that covers up the forum post I'm typing. Joy

How much RAM needed for the DB box

Hi,
Can someone share with me the technical way to do calculation of how much of RAM needed for a new Linux box with estimation of 500 users. I hope this calculation can also allow me to breakdown how much MEMORY needed for each session.
Please recommend any site that I can refer to if any. TQ.

My project start with Oracle 9i R2 (9206) on Linux (not yet confirm on the platform and etc). Just assume I will use Linux Red Hat Adv Sever latest version.
Hence how many GB of memory for the box is sufficient to handle 500 connections. Pls guide me the formula to derive the calculation. TQ

Which Airport card do I need for an iMac G4 Flat Screen 15"?

Hi, I have an iMac G4 (flat screen, with silver arm and round base), 15".
I'd be extremely grateful if someone could let me know which Airport card I need for this Mac and also whether or not I also require an adaptor. I have looked this up on the Apple site and also in 'The Flatscreen iMac for Dummies' book (I'm a complete technophobe, I'm afraid!), but am none the wiser.
If possible, model numbers for the Airport card and adaptor that I do need would be much appreciated.
Many thanks,
Jeremy

Choose About this Mac from the Apple menu and click on More Info, or if you're running Mac OS 9, choose Apple System Profiler from the Apple menu. Check the speed of the computer's CPU; if it is below 1GHz, you need the regular AirPort card, with the AirPort Extreme card being used on newer iMacs. No iMac G4 requires an adaptor to use an AirPort card.
(23943)

What licenses do I need for CUCM and CME

Hi Experts,
I am a newbie to Cisco IP telephony and request your guidance.
My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
For the IP phone, I see 2 part numbers and am confused.
CP-7942G - Cisco Unified IP Phone 7942G
CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
And what do I need for CME?
Is FL-CME-SRST-10 enough for the CME?
What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :(
Can you please help me, Experts?
Thanks,
Pete

Hi without knowing your business goals, current network, etc here is some feedback.
Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
For instance the following is a router that comes with 25 CME
C2901-CME-SRST/K9
2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
You can add CP-7942G-CCME which is the physical phone and license for CME
Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
Router handset capacities see Table 7
http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
Hope this helps

Formula node for array

hi
i want to convert the values of an array using a different formula for each value in the array. Can i use formula node for this? if yes how
if no then is there any other method except for extracting each one individually and converting?

kunal227 wrote:
there are 16 elements in the array and the number remains constant (actually they are temp values acquired by a fieldpoint hardware).
the formula is a linear conversion (for example y = m*x + C) corresponding to the calibration curve of individual thermocouple connected to the fieldpoint hardware. every thermocouple has a different calibration curve and hence every element in the array is converted using a different linear formula.
All you need is an array of [m] and an array of [C], all the same size as your data arrray. No formula node needed.
(I think that's what mikeporter had in mind above)
Message Edited by altenbach on 07-24-2007 03:38 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CorrectedArray.png ‏4 KB

Numbers formula needed for fahrenheit to celsius

Similar Messages

Maybe you are looking for