Numeric control error handling

Hi all,
I have two question about numeric control.
1) "How to handle invalid inputs?"
Let say, I have one numeric control that can only accept 0 to +inf (Range). So negative input will be invalid data input. Whenever I typed the negative value on it, this control automatically changed back to default (min) value. What I want is that. Is there anyway to detect invalid user input? So that I can program whenever user input negative number, it will automatically change back to previous valid input (not default value).
2) "How to assign the dynamic range of numeric control?"
I used property node to assign the range but my problem is that. I assigned min 0.1, max 1.2 and increment 0.1 but I cant able to select 1.2 or sometime 0.1 by using increment/decrement arrow. Maybe because of floating points? And also I want to do when user input overrange value (eg.1.3) by typing, the value should go back to previous valid input.
Any idea? Thanks

You can choose how LV will react on entries exceeding a limit. The default is, that LV coerces the value to the limit. But you can also ignore the limit and the user can enter any value.
Nevertheless, if you ignore the limits, you always have to check in your software for invalid values!
Regarding 2) i couldn't reproduce what you described. Maybe you should post a little example....
For the 2nd part of your question, please see my answer above...
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

  • POJO Data Control Error Handling

    Hi.
    I have POJO Data Control on Model.
    Now everytime this data control thorws exception (JboException) on ViewController I get two errors like:
    ValidationException: Exception Description: My JboException error
    ... (Stacktrace)
    Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.adfinternal.model.adapter.bean.BeanDCUtils.invokeMethod(BeanDCUtils.java:730)
         at oracle.adf.model.adapter.bean.BeanDCInvokeMethodHandler.invoke(BeanDCInvokeMethodHandler.java:100)
         at oracle.adf.model.adapter.bean.UpdatableBeanDataControl.invokeOperation(UpdatableBeanDataControl.java:459)
         ... 75 moreWhat is proper way of handling exceptions in POJO Data Controls?
    Regards

    Hi,
    any exception that is thrown by the data control is passed on to the binding layer to display the exception (if dc is accessed through the binding). So how do you access the POJO DC when the exception is thrown?
    Frank

  • How to take control back from service error handler in osb

    I am using osb to send data to multiple services at the same time.since x query is a procedural language if any single operation fails the flow goes to service error handler which calls a BPEL webservice and logs the error in a database but the control doesnt comes back to my code I have tried everything including RESUME,REPLY operations but all in vain similarly i cannot use service callout call to my business service because its not allowing to select my BPEL wsdl operation

    If your statement "the control doesnt comes back to my code" means you expect that your xquery will continue in processing than your expectations are just too high. :-)
    Resume action is supposed to resume the next action in the message flow. It means the action that follows the action which caused an error.

  • Error Handling in table control for line item.

    Hi,
    Please how to do error handling in table control for line item in bdc,i have used format_message for header but i don't no fill decamps internal tabled and  how to do background processing in call transaction.
    Thanks

    Background processing is not possible using call transaction method.
    You can create an executable program which can have CALL TRANSACTION BDC code. And this can be run in background.
    What do you exactly mean by Error handling for Items in table control. Can you give some more details.

  • Error handling and string controls...

    I have a simple program where You enter something in a String control. It is
    wired to a case structure. The default case wires a 0 to a Simple Error
    Handler, which outputs an error message.
    How do I change the String control to the empty string after I give the
    error message, so that the program isn't stuck giving errors infinitely?
    Thanks,
    Jon

    You can create a local variable of your string control where you can write
    any string into your string control after giving the error massage.
    Niko

  • Custom Error handling in DataSheet View with pop-up message or label controls or HTML

    I have a requirement in which DataSheet view is used to bulk edit or input list items and handle validations while in the process.
    We have validations done in event recievers before creating the list item. But could not provide a pop up or message with summary of all validation errors. these are buiness custom validations.
    Is there a way to custom error handle datasheet view? Is there a way to invoke a UI in context from event recievers?

    I have a requirement in which DataSheet view is used to bulk edit or input list items and handle validations while in the process.
    We have validations done in event recievers before creating the list item. But could not provide a pop up or message with summary of all validation errors. these are buiness custom validations.
    Is there a way to custom error handle datasheet view? Is there a way to invoke a UI in context from event recievers?

  • ADF Custom error handler not working.

    Hi All,
    i am using jdev version 11.1.1.5.0. i have created one custom error handler class in model layer which extend DcErrorHandlerImpl class.
    and do the entry in Databinding.cpx file
    *<Application ErrorHandlerClass="mypackage.classname"/>*
    i have override getDisplayMessage(BindingContext ctx, Exception ex) method to show SQL Exception which comes from database table trigger.
    code is following-
    package com.in.jagran.view.services;
        import java.sql.SQLException;
        import oracle.adf.model.BindingContext;
        import oracle.adf.model.binding.DCErrorHandlerImpl;
        import oracle.jbo.JboException;
        public class AclasErrorHandler extends DCErrorHandlerImpl {
          public AclasErrorHandler(boolean setToThrow) {
            super(setToThrow);
            System.out.println("Inside Error Handler class");
          public AclasErrorHandler() {
              super(true);
           // this(true);
           * Returns the message that will be reported to JSF for each error that occurs.
           * Returning "null" is the way the custom error handler signals that a given exception
           * should not be reported to the client.
          @Override
          public String getDisplayMessage(BindingContext ctx, Exception ex)
            if (ex instanceof oracle.jbo.ValidationException) {
              return super.getDisplayMessage(ctx, ex);
            else {
              // Extract and return the error message that has to be displayed
              Exception exception = ex;
              String message = "";
              // If this exception is an instance of JboException,
              // try to find the cause by recursing over the eventual causing exceptions
              if (exception instanceof JboException)
                Throwable[] exceptionList = ((JboException)exception).getExceptions();
                while (exception instanceof JboException
                        && exceptionList != null && exceptionList.length > 0)
                  exception = (Exception)exceptionList[0];
                  if (exception instanceof JboException) {
                    exceptionList = ((JboException)exception).getExceptions();
              // *** Special processing of SQLExceptions
              if (exception instanceof SQLException) {
                message = exception.getMessage();
                // Ignore the lines in the error message that indicate the line number in the PLSQL code that the error resulted on.
                int ind = message.indexOf("ORA-06512");
                if (ind > 0)
                  message = message.substring(0, ind);
              // *** If the the reason for the JboException was data creation exception then display the message
              // of the top JboException (i.e. JBO-*****: Invalid numeric value, date format or time format)
              else if (exception instanceof NumberFormatException || exception instanceof IllegalArgumentException) {
                // Report the top exception
                message = ex.getMessage();
              // Otherwise report the message of the lowest exception in the hierarchy
              else {
                message = exception.getMessage();
              return message;
        }but it is not working for me.
    thanks in Advance.

    yes i have used dubugger.
    i have set break point to following line-
    return super.getDisplayMessage(ctx, ex);
    if (ex instanceof oracle.jbo.ValidationException) {
            return super.getDisplayMessage(ctx, ex);   
    }when atttribute validation done like i have attribute of type number and i have done the validation "must be greater than 0" now when i have given negative value control go to above line.
    and i have added following code also in handler class
            @Override
               public void reportException(DCBindingContainer dCBindingContainer,
                                           Exception exception) {
    System.out.println(exception.getMessage());
                       super.reportException(dCBindingContainer, exception);
                   }now when i have done commit operation control go to here and println statement print follwoing error on log window.
    JBO-26041: Failed to post data to database during "Rollback to Savepoint": SQL Statement "null".

  • [Problem] Updating Numeric Controls on a Tab Problem

    Using LabWindows CVI 8.0.1
    I have a UIR with a button on it and a tab control.  On the tab control there are 23 numeric controls.
    When the button is pressed the code reads a file and populates an array.  It then populates 23 controls on the tab.
    I have a constant array defined for the controls.  The button call back gets the panel handle and then loops through each control and populates it from the array of values.
    The problem I am seeing is if I click the button 22 of the controls update, the first one does not.  If I save the data (another button) it saves the values which are loaded (i.e. it knows the first control contains a value even though it is displaying 0.000). 
    If I click the button twice, then all 23 controls update.
    I added ProcessDrawEvents and ProcessSystemEvents but it made no difference.  However if, in my code I modified the callback to call the function that populates the tab controls twice it populates all 23 controls correctly first time. 
    Is this a known issue, or has anyone seen this before?
    Should mention that the code is compiled as a DLL and is called via TestStand 3.5.  It makes use of #include "tsutil.h" library.  There is also a ActiveX control on the UIR (not on the tab) which is a date picker.
    Christopher Povey
    Senior Test Systems Engineer for BAE Systems.

    Global:
    #define NumberOfCrosses 23
    const int CrossCtrlAzimuthHandles [NumberOfCrosses]   = { CROSSPOSN_X_CROSS_1,  CROSSPOSN_X_CROSS_2,  CROSSPOSN_X_CROSS_3,  CROSSPOSN_X_CROSS_4,  CROSSPOSN_X_CROSS_5, 
                                 CROSSPOSN_X_CROSS_6,  CROSSPOSN_X_CROSS_7,  CROSSPOSN_X_CROSS_8,  CROSSPOSN_X_CROSS_9,  CROSSPOSN_X_CROSS_10,
                                 CROSSPOSN_X_CROSS_11, CROSSPOSN_X_CROSS_12, CROSSPOSN_X_CROSS_13, CROSSPOSN_X_CROSS_14, CROSSPOSN_X_CROSS_15,
                                 CROSSPOSN_X_CROSS_16, CROSSPOSN_X_CROSS_17, CROSSPOSN_X_CROSS_18, CROSSPOSN_X_CROSS_19, CROSSPOSN_X_CROSS_20,
                                 CROSSPOSN_X_CROSS_21, CROSSPOSN_X_CROSS_22, CROSSPOSN_X_CROSS_23 };
    const int CrossCtrlElevationHandles [NumberOfCrosses] = { CROSSPOSN_Y_CROSS_1,  CROSSPOSN_Y_CROSS_2,  CROSSPOSN_Y_CROSS_3,  CROSSPOSN_Y_CROSS_4,  CROSSPOSN_Y_CROSS_5, 
                                 CROSSPOSN_Y_CROSS_6,  CROSSPOSN_Y_CROSS_7,  CROSSPOSN_Y_CROSS_8,  CROSSPOSN_Y_CROSS_9,  CROSSPOSN_Y_CROSS_10,
                                 CROSSPOSN_Y_CROSS_11, CROSSPOSN_Y_CROSS_12, CROSSPOSN_Y_CROSS_13, CROSSPOSN_Y_CROSS_14, CROSSPOSN_Y_CROSS_15,
                                 CROSSPOSN_Y_CROSS_16, CROSSPOSN_Y_CROSS_17, CROSSPOSN_Y_CROSS_18, CROSSPOSN_Y_CROSS_19, CROSSPOSN_Y_CROSS_20,
                                 CROSSPOSN_Y_CROSS_21, CROSSPOSN_Y_CROSS_22, CROSSPOSN_Y_CROSS_23  };
    const int CrossCtrlDistortionTolerancesHandles [NumberOfCrosses] = { DISTTOL_TOL_CROSS_1,  DISTTOL_TOL_CROSS_2,  DISTTOL_TOL_CROSS_3,  DISTTOL_TOL_CROSS_4,  DISTTOL_TOL_CROSS_5,
                                       DISTTOL_TOL_CROSS_6,  DISTTOL_TOL_CROSS_7,  DISTTOL_TOL_CROSS_8,  DISTTOL_TOL_CROSS_9,  DISTTOL_TOL_CROSS_10,
                                       DISTTOL_TOL_CROSS_11, DISTTOL_TOL_CROSS_12, DISTTOL_TOL_CROSS_13, DISTTOL_TOL_CROSS_14, DISTTOL_TOL_CROSS_15,
                                       DISTTOL_TOL_CROSS_16, DISTTOL_TOL_CROSS_17, DISTTOL_TOL_CROSS_18, DISTTOL_TOL_CROSS_19, DISTTOL_TOL_CROSS_20,
                                       DISTTOL_TOL_CROSS_21, DISTTOL_TOL_CROSS_22, DISTTOL_TOL_CROSS_23 };
    Function:
     // Get the panel handles.
     tsErrChk (GetPanelHandleFromTabPage (panelHandle, MAIN_PANEL_TAB, 0, &calibrationTabHandle));
     tsErrChk (GetPanelHandleFromTabPage (panelHandle, MAIN_PANEL_TAB, 1, &tolerancesTabHandle));
     // Get the cross positions.
     for (loop = 0; loop < NumberOfCrosses && error >= 0; loop++)
      tsErrChk (SetCtrlVal (calibrationTabHandle, CrossCtrlAzimuthHandles   [loop],            calibrationValues.crossAzimuthPosition      [loop]));
      tsErrChk (SetCtrlVal (calibrationTabHandle, CrossCtrlElevationHandles [loop],            calibrationValues.crossElevationPosition    [loop]));
      tsErrChk (SetCtrlVal (tolerancesTabHandle,  CrossCtrlDistortionTolerancesHandles [loop], calibrationValues.crossDistortionTolerances [loop]));
    No errors are returned to TestStand.
    Christopher Povey
    Senior Test Systems Engineer for BAE Systems.

  • Can you use the value from a numeric indicator in a numeric control?

    Hi!
         I have to develop a code where I have to find the maximum value of a waveform and draw a line at 50% of the value. So I chose to find the amplitude of say 10 cycles of waveforms and found the maximum value out of the amplitudes. 
    But my real problem is, I have to use the maximum amplitude value that I get from the max. array VI and put it back in program to calculate the 50% value. 
    So is it possible to use the value from a numeric indicator and put it in a numeric control? Like in MATLAB or C, you give the variable a name and use it later to do any computations. Is it possible to do something similar in LabVIEW? 
    Solved!
    Go to Solution.

    Hi!
         Thank you very much for taking some time out. I have been trying to do this since 2 months and I am stuck right where I am.
    The situation is, I have to calculate the amplitude of the irregular waveform for a few trials and then find the maximum amplitude out of the trials and display a line at whatever % of amplitude the user chooses. I tried using property nodes but I am getting Error 1055 for some unknown reason. Then I decided to draw the line using DC offset but it turns out it calculates the amplitude each time and so the line keeps dancing everytime. Now my challenge is to have the amplitude calculated for say, 20 loops and then calculate the max from that. I ran out of ideas so I am posting here. I am using LabVIEW version 8, and I'll upload a few of my attempts. I hope I am not troubling you'll much.
    Attachments:
    amplitude display.vi ‏217 KB
    amplitude display 1.vi ‏148 KB
    Using property node.vi ‏56 KB

  • Issue with SRDemo error handling

    Hi All,
    Glad the forums are back up and running. In debugging some error-handling issues in our own application, I found an issue in the error handling code of SRDemo. I thought I'd post the issue here, as many of us (myself included) use some SRDemo code as the basis for our own applications.
    The issue can be found in the oracle.srdemo.view.frameworkExt.SRDemoPageLifecycle class, specifically in the translateExceptionToFacesErrors method. I'll show the code that has the issue first, and explain the issue afterwards:
            if (numAttr > 0) {
                Iterator i = attributeErrors.keySet().iterator();
                while (i.hasNext()) {
                    String attrNameKey = (String)i.next();
                     * Only add the error to show to the user if it was related
                     * to a field they can see on the screen. We accomplish this
                     * by checking whether there is a control binding in the current
                     * binding container by the same name as the attribute with
                     * the related exception that was reported.
                    ControlBinding cb =
                        ADFUtils.findControlBinding(bc, attrNameKey);
                    if (cb != null) {
                        String msg = (String)attributeErrors.get(attrNameKey);
                        if (cb instanceof JUCtrlAttrsBinding) {
                            attrNameKey = ((JUCtrlAttrsBinding)cb).getLabel();
                        JSFUtils.addFacesErrorMessage(attrNameKey, msg);
                }Now, this bit of code attempts to be "smart" and only show error messages relating to attributes if those attributes are in fact displayed on the screen. It does so by using a utility method to find a control binding for the attribute name. There are two issues with this code, one obvious, and one that is a bit more subtle.
    The obvious issue: if there is a binding in the page definition, it doesn't necessarily mean that the attribute is shown on the screen. It's a good approximation, but not exact.
    The other issue is more subtle, and led to errors being "eaten," or not shown, in our application. The issue comes if you are using an af:table to display and update your data. In that case, the findControlBinding will not find anything for that attribute, since the attribute is contained within a table binding.
    Just posting this as a word to the wary.
    Best,
    john

    somehow, this message got in the wrong thread....
    Hi Frank,
    Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
    It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
    At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
    John
    it was supposed to be something like:
    Hi Frank,
    Thanks for the reply. I was simply posting this here so that people who use the SRDemo application techniques as a basis for developing the same functionality in their own apps (like me) can be aware of the issue, and avoid lots of head-scratching to figure out "what happened to the error message?"
    John

  • How to stop execution after generating error message in an error handler?

    I am working on ALSB 3.0.I have a proxy consisting of 2 stages in a pipeline pair. I have error handlers for each of the stages. The first stage contains schema validation action. Whenever the schema validation fails,control should transfer to error handler.
    The error handler has a publish action and in request action I am calling an xquery transformation to generate error message.Publish action should publish message to a jms based business service configured. My questions are:
    1. After getting into the error handler, the first alert msg configured inside request action (of publish action) is generated.Subsequent actions to generate error xml message and to replace the contents of errorXml in $body are not executed.And so no error message is generated or published.
    2. I have also configured a reply with failure. Inspite of that,the control shifts to next stage in request pipeline and execution continues.
    Can anyone tell me where I need to do the corrections.
    Cheers.
    Edited by: arrajago on Jun 15, 2009 11:55 PM

    Got the answer.Generate error xml outside publish action.Replace action has to placed inside Publish's request action.To stop execution,use Reply action after Publish.

  • Is there a way to find out that a variant is of type vt_null, without using an error handler?

    i am using an persistant ado-recordset. some fields may return a variant of type vt_null (sql-null value).
    i want to figure out if a field contains a null or an empty string. when i checked the "view type" at a variant control, i see that labview correctly recognize a null value.
    making a compare with "not a refnum/number/..." does not work. checking against a null string also don't work.
    i used "variant flatten string" and "flatten string" but there is no difference between a field containing data and a null field (the type string tells me that is a reference to the variant, neither function 'flatten' the refrenced variant)
    "varaint to data" results in an error, whe
    n used with lv-native datatype and trying to convert a null-value. but the function has to return a variant, so using an error-handler is not an option. (converting variant-null to variant-data does not produce an error)
    i also tried to get the "attribute" "value type"; it is not accessable with this function, like "attribute" "value".
    is there a way to extract the variant data-type from a variant? or any other soloution to find out that a variant carries a null-value?

    Hi,
    sorry, i got no idea how to get the datatype of a variant, but there are properties "ActualSize" and "Type" of the ADO Field-Object. In case of an empty field the ActualSize is zero. Maybe you can use that. See VI below.
    best regards
    chris
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"
    Attachments:
    DB_Test.vi ‏67 KB

  • Numeric overflow error in aggregation level formula

    The formula for Revenue/Quantity is giving me the following error:
    Error: [314]: numeric overflow: search table error:  [6944] AttributeEngine: overflow in numeric calculation;Error executing physical plan: exception 6944: AttributeEngine/Parallel/Aggregation.cpp:573 AttributeEngine: overflow in numeric calculation; $function$=read; $message$=unable to read measures RAOL01:_SYS_CE__popid_24_531C272BF80A349FE10000007F000002_558972en TEST_Revenue fixed16.12 ,in executor::Executor in cube: RAOL01:_SYS_CE_$REQUEST$_popid_24_531C272BF80A349FE10000007F000002_558973: calcEngine search on olapIndex failed.
    I am aware that if Quantity is zero then we get this error, but I have already handled it and Quantity is never zero.
    Both the measures are Decimal, any suggestions as to how to handle this?

    My first guess you have reached the upper limit of the datatype on concerned column and the AttributeEngine is not capable now to handle the numeric overflow, hence throwing the error message.
    Try converting it to higher datatypes like double, you can also try to do an workaround with datatype conversion functions like TO_DOUBLE before aggregation func.
    If you are using something like sum("COL1") try using sum(TO_DOUBLE("COL1"))

  • Error Handling in OS 10gR3: How To's, Approaches, best practices

    I am trying to do error rhandling within OSB 10gR3 and looking for some guidance as to best practices and how to carry out the error handling based on my use-case as -
    Consumers ---> GenericProxyExt(WSDL based) ---> GenericProxyInt(Any SOAP) ---> Proxy (Any XML) ---> Business Service --------------> Target Service
    Since target web service will pass error in the SOAP:fault, where in the OSB should this error be handled? Also, how can I pass the custom error messages (instead of the one returned from the target service). Do I have to write error handlers in each of the proxy services?
    Any insight, sample code, approaches will be helpful
    Thanks,
    -J

    user2629959 wrote:
    I am trying to do error rhandling within OSB 10gR3 and looking for some guidance as to best practices and how to carry out the error handling based on my use-case as - Some customer has documented related info www.insemble.com/CustomExceptionHandlingwithOracleServiceBus.pdf
    >
    Consumers ---> GenericProxyExt(WSDL based) ---> GenericProxyInt(Any SOAP) ---> Proxy (Any XML) ---> Business Service --------------> Target Service
    Since target web service will pass error in the SOAP:fault, where in the OSB should this error be handled? Also, how can I pass the custom error messages (instead of the one returned from the target service). Do I have to write error handlers in each of the proxy services?Not sure if I understood your point of using that many proxies for invoking a Target Service.
    Since BS throws soap fault, and the last Proxy is AnyXML. You need to do bit of manipulations. First of all for AnyXML services, you have to manually copy $fault into $body. Reason behind this step, is For Any XML there is no concept of $fault being returned and reply with failure. Subsequent proxies will receive the $fault as originated in Target Service. If we want to control the $fault received by the consumers, we have to use error handlers and populate $fault accordingly.
    >
    Any insight, sample code, approaches will be helpful
    Thanks,
    -J

  • How to create a generic error handling proxy?

    Hello,
    i have few services proxies.
    I want to create a generic error handling osb proxy which does only errorhandling.
    This proxy would be called by all my services.Now suppose my services proxies would throw any error,the control will pass to error handling block of proxy..from there i will call this generic errorhandling proxyusing a service callout or publish action.In this proxy i want to do all my error handling based on 'n' conditions.and i want to pass the message to the fault variable of services proxy..kindly suggest ways..*main challenge is passing the message to the fault variable of services proxy*

    Hi,
    For generic error handling framework or common error handling framework...create a bpel process which takes the error details payload and sends the inf/data as email to the particular receipients.
    create business process with bpel process and proxy using business service.so wen ever error occurs at stage or route or proxy level ..call error handler action in OSB.Assign error handler details to the bpel input payload.
    FOR EX:
    <soap-env:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <com:test>
    <com:ProcessInfo>testDetails</com:ProcessInfo>
    <com:BusinessProcessName>testprocess</com:BusinessProcessName>
    <com:BusinessProcessInstanceId>{fn-bea:uuid()}</com:BusinessProcessInstanceId>
    <com:BusinessProcessStep>ReqLayer</com:BusinessProcessStep>
    <com:ErrorCode>{string($fault/ctx:errorCode)}</com:ErrorCode>
    <com:ErrorType>Technical</com:ErrorType>
    <com:StatusCode>Error</com:StatusCode>
    <com:ImplementationCode>OSB</com:ImplementationCode>
    <com:ErrorDescription>{string($fault/ctx:reason)}</com:ErrorDescription>
    <com:ErrorDateTime>{fn:current-dateTime()}</com:ErrorDateTime>
    <com:Node>{string($fault/ctx:location/ctx:node)}</com:Node>
    <com:Path>{string($fault/ctx:location/ctx:path)}</com:Path>
    </com:test>
    </soap-env:Body>
    this assign the error details values to the bpel process.

Maybe you are looking for

  • FSCM-CR Case types for Documented Credit Decision (FDCD, FDCA) missing.

    Hi FSCM community I am looking at the FSCM CR module and got some issues here and there. Here's one of them. Documentation for the SAP IMG node: FSCM -> Credit Management -> Credit Risk Monitoring -> Documented Credit Decision -> Settings in the Case

  • Preview at new document windows8

    Hi People, I have just got started with Indesign and was following the first lesson of tutorials, until I noticed that when I am creating a new document, I dont have nay feature releated to preview. Is it only for mac? Cheers!

  • Live Recording with mics and Software Instruments

    Has anyone used the Software Instruments in GB to play live, while recording the Software Instruments direct and live (Real Instruments) as well? I'm thinking about getting a FirePod or similar, to record my band live using several mics and playing a

  • My dvd drive won't work on my MacBook Pro.

    I've looked through tons of forums on this subject but have only found people that have the same problem as me but no solutions. I slide in a store bought DVD movie it spins and whirs for a few seconds and then gets spit back out. No sign of it even

  • Traffic Shaping in Arch

    Hello, I have an idea. I mine workspace have workers whose use torrent and some application which is get slow network. How can I set up the network for if anybody want do another thinks that is going fast, but torrent isn't, then after going torrent