Nvidia Driver install problem after new kernel

i recentyl updated my kernel to 2.4.22 and added bootsplash support.. that works perfectly and the kernel works good.. except i have to rei stgall the nvidia driver.. but it gives me an errror that it cannot find kernel header file sources.. i made the package in /usr/abs/kernels/kernel did makepkg.. it made it find and it has a pkg/src directory.. i copied the src of the kernel to /usr/src/linux so theres /usr/src/linux/2.4.22 but it still will not work and cannot make the module and load it.. still gives methat i tcannot find kernel header files... any help would be great
-bolero

well you should have the headers if you used makepkg to rebuild your kernel as part of the pacakge creates a /usr/src/linux directory that holds all necessary headers.
if you did not use makepkg to build you kernel then you obviously did not create a /usr/src/linux directory (you do this by untarring the kernel source in /usr/src than symlinking the untarred source directory (linux-2.4.22 in your case) to linux (ln -s linux-2.4.22 linux).

Similar Messages

OS install problem after new HD install

I very proudly installed a new 250g HD in my crashed mac mini A1176 ( I did not have anything backed up). After startup I got the ?. I put an install disk from macbook and restarted.I got to the installation stage and It said I couldn't install that software. I then partitioned and formatted the new HD (per forum posts) but still could not install OS. For some reason I also could not eject the disk. I tried all the tips and eventually opened it up and took out disk.
Next I tried to start up with Black OSX Tiger install disk- it won't show up. stuck on ? disk. And now I still can't eject that disk either.
Any ideas? Did I do something wrong on HD install? How can I get this working again?

First, do you have the original disks that came with the Mini? You stated that you tried "black" Tiger disks. Depending on your Mini's version, it could have shipped with 10.3.7, 10.4, 10.4.2, 10.4.5, 10.4.6, 10.4.7, 10.4.8, 10.4.10, 10.5 or 10.5.6
Let's say your Mini shipped running 10.4.5; Black Tiger 10.4.0 could not be used for the install.
Download and take a look at the Mini section of Mactracker http://mactracker.dreamhosters.com/ for all Mini information.

I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

Keyboardmap messed up after new kernel was installed

Hey guys,
Was installing Arch the other day, and completed the installation of the base system.
Today I wanted to do the rest. I got to the point where I upgraded pacman and did a full system upgrade.
Got a new kernel, and according to the beginnersguide, after a kernel install, the pc will reboot or something like that.
It didn't reboot, so I issued the reboot command manually. The pc rebooted and when I wanted to log in, the keyboardlayout was messed up.
The keys had entirely different positions. R was P, O was R , T was Y.
Also, during the install of the basesystem with the livecd, wireless worked fine, but when I wanted to install stuff to the base system, wireless didn't work.
It could find the networks, but couldn't connect to them.
Flux

Hi.
I see that this post is starting to get old, so you probably figured out the solution, but here it is anyway...
I had this problem to, and after many hours of trying and failing, i finally figured out that the reason for this, is that the update also installs the keymap "dworak/no", and since dworak is listed before qwerty, it selects the dworak layout. You should be able to use "qwerty/no" in rc.conf to load the normal keyboard layout.
And btw, sorry for my bad english

My Mac Book Pro has just had a new memory and solid state drive installed. After the installation, the Lightroom tools all became grey. There is no longer any color on the screen other than my picture. Even the color sliders are grey. Can you please help

My MacBook Pro just had a new memory and solid state drive installed. Since the installation, the Lightroom tools are now all grey. Even the color sliders are grey. Please help!

My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
Sliders are white, look different | Mac OS X 10.9 Mavericks
Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem.

Error message (GT8500- WindowsXP) "affichage defect" because NVIDIA driver (installed 340.52 updated), but 8500GT/PCIe/SSE2 3.3.0 required by Adobe Premiere 10 message ?? What is the problem ? Thank you for help.

Pourquoi ce message, car le driver de la carte Nvidia GT8500 est à jour !

fclau
There is a known major issue with Premiere Elements 10 on a computer that uses a NVIDIA GeForce video card/graphics card. The answer is to roll back the driver version to about May 2013. You do not want an up to date driver in this case. For some computer operating systems like Windows 8 or 8.1 64 bit, this roll back fix is not possible because the video card/graphics card driver versions available do not go back far enough.
This matter has been written about extensively in this forum for over a year. And, there is an Announcement about this matter at the top of this forum.
Also see
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
and
NVIDIA Driver Downloads - Advanced Search
which will help you identify the driver version and download/install it.
According to what you wrote and assuming that your Windows XP is SP3 32 bit, your NVIDIA drivers page should look like this after you plug in your data.
And based on history, your choice in the above should be GeForce 320.18 Driver 320.18 May 23, 2013.
Please review and consider. And, then let us know if we have interpreted your information correctly.
Thank you.
ATR

[SOLVED] Problem with nvidia driver install/uninstall

A while ago I installed the 177.70 driver from nvidia's site, then I was trying to install the 177.80 and to remove the .70 first, I tried
sh NVIDIA-filename.177.70.run --uninstall
And the installer told me no nvidia driver was found. I haven't been able to install a newer driver since every time I tried X would give me a driver mismatch error on start-up. I am hesitant to manually remove any files, how would I fully get rid of 177.70 so I can install a newer one??
TIA
Last edited by colbert (2008-12-05 02:58:10)

See script for the command you should be running:
sh NVIDIA-Linux-x86-180.11-pkg1.run -a -q -s -N --no-opengl-headers
Assuming you're on 32-bit. To let Nvidia's installer sort out your mess.
Last edited by brebs (2008-12-04 21:52:19)

Sound problems with new kernel

When I upgraded to 2.6.21, my sound just started skipping. It would still play, but apps would freeze and sounds would continue for ages. Now, for some odd reason, I get no sound at all.
dmesg:
Linux version 2.6.21-suspend2 (root@architect) (gcc version 4.1.2 20070423 (prerelease)) #1 SMP PREEMPT Tue May 8 23:00:33 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000d8000 size: 0000000000008000 end: 00000000000e0000 type: 2
copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001bf70000 size: 000000000000c000 end: 000000001bf7c000 type: 3
copy_e820_map() start: 000000001bf7c000 size: 0000000000004000 end: 000000001bf80000 type: 4
copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2
copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data)
BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
447MB LOWMEM available.
Entering add_active_range(0, 0, 114544) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 114544
HighMem 114544 -> 114544
early_node_map[1] active PFN ranges
0: 0 -> 114544
On node 0 totalpages: 114544
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 862 pages used for memmap
Normal zone: 109586 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6AB0, 0014 (r0 PTLTD )
ACPI: RSDT 1BF752A9, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1BF7BF64, 0074 (r1 ATI Salmon 6040000 ATI F4240)
ACPI: DSDT 1BF752D5, 6C8F (r1 ATI MS2_1535 6040000 MSFT 100000E)
ACPI: FACS 1BF7CFC0, 0040
ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
Built 1 zonelists. Total pages: 113650
Kernel command line: root=/dev/hda3 ro resume2=swap:/dev/hda2
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0138b000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2591.805 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 448176k/458176k available (2391k kernel code, 9452k reserved, 784k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
.init : 0xc0422000 - 0xc0465000 ( 268 kB)
.data : 0xc0355fb1 - 0xc041a2ac ( 784 kB)
.text : 0xc0100000 - 0xc0355fb1 (2391 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5190.03 BogoMIPS (lpj=2595019)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00003080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0420)
CPU0: Intel(R) Celeron(R) CPU 2.60GHz stepping 09
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Device driver platform lacks bus and class support for being resumed.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Device driver pci0000:00 lacks bus and class support for being resumed.
PCI quirk: region 8000-803f claimed by ali7101 ACPI
PCI quirk: region 8040-805f claimed by ali7101 SMB
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
Device driver pnp0 lacks bus and class support for being resumed.
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x480-0x48f has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:07: ioport range 0x8000-0x807f could not be reserved
pnp: 00:07: iomem range 0xd0007000-0xd0007fff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: d0300000-d03fffff
PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 30000000-33ffffff
MEM window: 34000000-37ffffff
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
Device driver pnp1 lacks bus and class support for being resumed.
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
0000:00:08.0: ttyS0 at I/O 0x1428 (irq = 10) is a 8250
0000:00:08.0: ttyS1 at I/O 0x1440 (irq = 10) is a 8250
0000:00:08.0: ttyS2 at I/O 0x1450 (irq = 10) is a 8250
0000:00:08.0: ttyS3 at I/O 0x1460 (irq = 10) is a 8250
Couldn't register serial port 0000:00:08.0: -28
Device driver isa lacks bus and class support for being resumed.
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Device driver lo lacks bus and class support for being resumed.
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend v2.2.10
Suspend2 Userspace Storage Manager support registered.
Suspend2 Basic User Interface support registered.
Suspend2 Compressor support registered.
Suspend2 Block I/O support registered.
Suspend2 Swap Allocator support registered.
Suspend2 File Allocator support registered.
Suspend2 Userspace UI support registered.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: Unable to derive IRQ for device 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK4025GAS, ATA DISK drive
Device driver ide0 lacks bus and class support for being resumed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SD-R2512, ATAPI CD/DVD-ROM drive
Device driver ide1 lacks bus and class support for being resumed.
ide1 at 0x170-0x177,0x376 on irq 15
PCI driver ALI15x3_IDE lacks driver specific resume support.
PCI driver PCI_IDE lacks driver specific resume support.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Enabling device 0000:00:0b.2 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0005000
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.0: UHCI Host Controller
uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000
Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.1: UHCI Host Controller
uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020
Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
usb 3-2: new low speed USB device using uhci_hcd and address 2
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda:Device driver usbdev3.2_ep00 lacks bus and class support for being resumed.
usb 3-2: configuration #1 chosen from 1 choice
Device driver usbdev3.2_ep81 lacks bus and class support for being resumed.
hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Suspend2: SwapAllocator: Signature found.
Suspend2: Resuming enabled.
Suspend2: Normal swapspace found.
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: replayed 3 transactions in 0 seconds
ReiserFS: hda3: Using r5 hash to sort names
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[email protected]>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
Device driver eth0 lacks bus and class support for being resumed.
natsemi eth0: NatSemi DP8381[56] at 0xd0006000 (0000:00:12.0), 00:0e:7f:eb:fd:8a, IRQ 10, port TP.
ndiswrapper version 1.43 loaded (smp=yes)
ndiswrapper: driver bcmwl5 (Broadcom,06/26/2004, 3.70.17.0) loaded
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
ndiswrapper: using IRQ 10
Device driver wlan0 lacks bus and class support for being resumed.
wlan0: ethernet device 00:90:4b:4a:18:85 using NDIS driver: bcmwl5, version: 0x3461100, NDIS version: 0x501, vendor: '', 14E4:4320.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
usbcore: registered new interface driver ndiswrapper
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [THRM] (55 C)
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 64M @ 0xd4000000
PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
ali_stimer_read: stimer is not ready.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ali_stimer_read: stimer is not ready.
ali_stimer_read: stimer is not ready.
ali_stimer_read: stimer is not ready.
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ali_stimer_read: stimer is not ready.
input: PC Speaker as /class/input/input5
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.1-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input7
atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0).
atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0).
atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x01111112, devctl 0x64
Yenta: ISA IRQ mask 0x0058, PCI irq 11
Socket status: 30000006
Device driver pcmcia_socket0 lacks bus and class support for being resumed.
PCI driver parport_pc lacks driver specific resume support.
ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
PCI driver ali15x3_smbus lacks driver specific resume support.
PCI driver shpchp lacks driver specific resume support.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Device driver i2c-0 lacks bus and class support for being resumed.
PCI driver ali1535_smbus lacks driver specific resume support.
lp0: using parport0 (interrupt-driven).
cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ppdev: user-space parallel port driver
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.25.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[drm] Setting GART location based on old memory map
[drm] writeback test succeeded in 1 usecs
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
bcm43xx driver
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshwd.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
wlan0: no IPv6 routers present
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
dca85843
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: ohci_hcd bcm43xx ieee80211softmac ieee80211 ieee80211_crypt radeon drm ipv6 ext2 mbcache ppdev lp pcmcia i2c_ali1535 joydev rtc_sysfs snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device rtc_proc rtc_dev snd_pcm_oss snd_mixer_oss parport_pc usbhid hid pcspkr parport ff_memless rtc_cmos rtc_core rtc_lib yenta_socket psmouse serio_raw rsrc_nonstatic pcmcia_core shpchp i2c_ali15x3 i2c_core pci_hotplug snd_ali5451 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc tsdev ati_agp agpgart evdev thermal processor fan button battery ac ndiswrapper natsemi reiserfs ide_cd cdrom ide_disk uhci_hcd ehci_hcd usbcore generic alim15x3 ide_core
CPU: 0
EIP: 0060:[<dca85843>] Tainted: P VLI
EFLAGS: 00010046 (2.6.21-suspend2 #1)
EIP is at snd_ali_playback_prepare+0x193/0x200 [snd_ali5451]
eax: 00002000 ebx: 00000000 ecx: 000010a0 edx: 000010f8
esi: 0000000f edi: dac6506c ebp: dab482c0 esp: d3e0bd54
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process artsd (pid: 4379, ti=d3e0a000 task=db7c2030 task.ti=d3e0a000)
Stack: 00000000 00003fff 00000eb3 00000000 00000001 00000000 00000000 0000f000
00000000 00000001 c0135c95 c03eebac 00000000 00000000 dac654f8 0000ac44
dac65000 00000000 1a5f0000 00000eb3 dab482c0 00000002 dcaaa34c dab482c0
Call Trace:
[<c0135c95>] notifier_call_chain+0x25/0x30
[<dca9bca9>] snd_pcm_do_prepare+0x9/0x20 [snd_pcm]
[<dca9b90b>] snd_pcm_action_single+0x2b/0x60 [snd_pcm]
[<dca9cb9b>] snd_pcm_action_nonatomic+0x6b/0x70 [snd_pcm]
[<dca9f4fd>] snd_pcm_common_ioctl1+0x42d/0xf80 [snd_pcm]
[<dca9f36e>] snd_pcm_common_ioctl1+0x29e/0xf80 [snd_pcm]
[<c0106dc0>] do_IRQ+0x40/0x70
[<dcaa2adc>] snd_pcm_hw_rule_add+0x8c/0x110 [snd_pcm]
[<c0141a3a>] clocksource_get_next+0x3a/0x40
[<c0131a79>] do_timer+0x239/0x810
[<c013ccda>] remove_wait_queue+0x1a/0x50
[<dcaa04b9>] snd_pcm_playback_ioctl1+0x39/0x430 [snd_pcm]
[<dcaa0973>] snd_pcm_playback_ioctl+0x43/0x50 [snd_pcm]
[<dcaa0930>] snd_pcm_playback_ioctl+0x0/0x50 [snd_pcm]
[<c018e8fb>] do_ioctl+0x2b/0x90
[<c018e9bc>] vfs_ioctl+0x5c/0x2a0
[<c018ec72>] sys_ioctl+0x72/0x90
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
Code: 10 0f b7 c0 66 ef c7 44 24 4c 00 10 00 00 e9 f5 fe ff ff 90 8d 74 26 00 8b 44 24 40 89 da e8 05 e8 ff ff e9 e0 fe ff ff 8b 47 18 <8b> 15 00 00 00 00 a3 18 00 00 00 01 c0 a3 14 00 00 00 8b 4c 24
EIP: [<dca85843>] snd_ali_playback_prepare+0x193/0x200 [snd_ali5451] SS:ESP 0068:d3e0bd54
note: artsd[4379] exited with preempt_count 1
BUG: scheduling while atomic: artsd/0x00000001/4379
[<c0352823>] __sched_text_start+0x503/0x950
[<c012dc39>] tasklet_action+0x49/0xc0
[<c012d8a2>] __do_softirq+0x72/0xe0
[<c012db8b>] irq_exit+0x5b/0x90
[<c02cbfb1>] skb_dequeue+0x41/0x60
[<c0353dbd>] __mutex_lock_slowpath+0x9d/0x280
[<dca9ccba>] snd_pcm_drop+0x5a/0xe0 [snd_pcm]
[<dca9cf0f>] snd_pcm_release_substream+0x1f/0x70 [snd_pcm]
[<dca9cfaf>] snd_pcm_release+0x4f/0xb0 [snd_pcm]
[<c01839b9>] __fput+0x99/0x170
[<c0180d87>] filp_close+0x47/0x80
[<c012a72f>] put_files_struct+0x8f/0xb0
[<c012b8dd>] do_exit+0x11d/0x7d0
[<c0120bf8>] __wake_up+0x38/0x50
[<c01058e0>] do_trap+0x0/0xf0
[<c011f4e4>] do_page_fault+0x2e4/0x630
[<c011f200>] do_page_fault+0x0/0x630
[<c03552ac>] error_code+0x7c/0x84
[<dca85843>] snd_ali_playback_prepare+0x193/0x200 [snd_ali5451]
[<c0135c95>] notifier_call_chain+0x25/0x30
[<dca9bca9>] snd_pcm_do_prepare+0x9/0x20 [snd_pcm]
[<dca9b90b>] snd_pcm_action_single+0x2b/0x60 [snd_pcm]
[<dca9cb9b>] snd_pcm_action_nonatomic+0x6b/0x70 [snd_pcm]
[<dca9f4fd>] snd_pcm_common_ioctl1+0x42d/0xf80 [snd_pcm]
[<dca9f36e>] snd_pcm_common_ioctl1+0x29e/0xf80 [snd_pcm]
[<c0106dc0>] do_IRQ+0x40/0x70
[<dcaa2adc>] snd_pcm_hw_rule_add+0x8c/0x110 [snd_pcm]
[<c0141a3a>] clocksource_get_next+0x3a/0x40
[<c0131a79>] do_timer+0x239/0x810
[<c013ccda>] remove_wait_queue+0x1a/0x50
[<dcaa04b9>] snd_pcm_playback_ioctl1+0x39/0x430 [snd_pcm]
[<dcaa0973>] snd_pcm_playback_ioctl+0x43/0x50 [snd_pcm]
[<dcaa0930>] snd_pcm_playback_ioctl+0x0/0x50 [snd_pcm]
[<c018e8fb>] do_ioctl+0x2b/0x90
[<c018e9bc>] vfs_ioctl+0x5c/0x2a0
[<c018ec72>] sys_ioctl+0x72/0x90
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
hwdetect --show-modules:
AGP : agpgart ati-agp
PATA : pata_ali ata_generic
SCSI : st
USB : usbcore ehci-hcd uhci-hcd
NET : natsemi ieee80211 ieee80211_crypt ieee80211softmac bcm43xx
INPUT : evdev ff-memless joydev pcspkr psmouse serio_raw tsdev usbhid
PCMCIA : pcmcia_core rsrc_nonstatic yenta_socket
SOUND : ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-ali5451 soundcore
VIDEO : radeonfb fb_ddc
OTHER : cdrom lp ppdev hid i2c-algo-bit i2c-ali1535 i2c-ali15x3 i2c-core parport parport_pc pci_hotplug shpchp rtc-cmos rtc-core rtc-dev rtc-lib rtc-proc rtc-sysfs
Any help will be greatly appreciated. Thanks in advance.
Last edited by coolpyrofreak (2007-05-09 15:33:35)

I seem to have the same problem. The sound would play in some programs, would not in others, and in all of them when I stop playing, it would repeat the last half second endlessly. Could anybody shed some light on this problem?
in dmesg:
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
and in errors.log:
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not inserted.
May 13 09:14:22 aconarch AC'97 1 access is not valid [0xffffffff], removing mixer.
May 13 09:14:22 aconarch ali mixer 1 creating error.
EDIT: 'lsmod | grep snd'
snd_seq_oss 29056 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38816 0
snd_mixer_oss 14336 1 snd_pcm_oss
snd_ali5451 19212 1
snd_ac97_codec 95396 1 snd_ali5451
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 3 snd_pcm_oss,snd_ali5451,snd_ac97_codec
snd_timer 19076 2 snd_seq,snd_pcm
snd 44388 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7816 1 snd_pcm
Last edited by bender02 (2007-05-13 15:41:04)

Having trouble getting the nvidia driver installed.

i'm trying to install the nvidia driver for a EVGA 8800 GTS. I ran pacman -S nvidia as the guide said but got this error:
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
klibc-kdb: /lib/initcpio/hooks/keymap exists in filesystem
klibc-kdb: /lib/initcpio/install/keymap exists in filesystem
errors occurred, no packages were upgraded.
sorry, i'm new to arch, so can anyone point me in the right direction?
thanks
xhhux

That is a known error (see this:http://www.archlinux.org/news/391/
The best way to get around it is to explicitly force the install of gpm then carry on with the update, i.e
pacman -Syf gpm
pacman -Syu
EDIT: You will most likely get a kernel upgrade while bringing your system in-sync with the repos, don't forget that you will need to reboot in order to use the new kernel.
Last edited by ghostHack (2008-06-12 21:56:55)

Isight driver install problems

Hello all, well after installing SL then Win 7 then running bootcamp inside windows almost everything is working correctly. The only error i'm faced with is the iSight drivers do not want to correctly install. At boot up i get a driver install error but when i go into the control panel it says the device is working correctly. Anyone else run into this problem?

Tnx, but the club sux! ;P
I?ve now tried everyting...
all other PCI card removed
onboard lan disabled
tried all pci slots
installed a fresh WinXP x64 and did driver-add on the soundcard first thing, in all slots etc
cut back on perihpals for more power
updated MB Bios
NOTHING works (
And yes, I have a valid ID number PCI\VEN_02&DEV_0005&SUBSYS_00202....
Whats left but RMA!?!
Hmm, just remembered, didnt disable the USB ports... can it... no.. or?!?
*gone checking*
/M

Possibly stupid question re: nvidia driver install

Hi there. I was wondering... Is it possible to install the nvidia driver without compiling the kernel? I don't want to repartition my drive to give Arch the space it would need to do that, and even if I had the space I'd rather not have to waste time compiling.
As a side curiousity, if I do indeed need to rebuild the kernel, can anyone explain why I need to? It seems to me that if whoever compiled it in the first place included the sources they used, and if they made a copy available, it would avoid a lot of hassle. Am I wrong?
Thanks in advance.

Pink Chick wrote:
OK - 1.) get source from kernel.org
OK - 2.) extract it in /usr/src
No - 3.) ln -s linux-2.6.4 linux (this step is debateable whither is necassary or not)
OK - 4.) run the NVidia installer (say yes compile me one when it says it can't find any on nvidia's site)
OK - 5.) update XF86Config-4
OK - 6.) add nvidia to the modules like of rc.conf
Just wanted to debate. If you fetched the kernel source, you should have a look inside its readme. There is a strong warning not to link your source to linux. Instead, give your nvidia installer the option where to find the source.
nvinstaller --kernel-source-path=/usr/src/linux-2.6.4/
Thanks, I wasn't aware of that. Will not do that any more
-wd

Nvidia driver install with pacman available

hi
you can find a nvidia package in tpowa repo
ftp://ftp.archlinux.org/tur/tpowa
now it is possible to add /update remove nvidia drivers with pacman
at the moment it works with kernel 2.6.5
not with the scsi kernel
i'll try to fix that
please test it and give feedback
thanks

hm if you update your kernel to 2.6.5-3
you have to update to gcc 3.4 too
the nvidia drivers have to be built with the same compiler that was used for the kernel
2.6.5-3 was built with gcc 3.4
--> nvidia driver has to be built with gcc 3.4
upgrade both packages and do
reboot for the new kernel and then X will not start due of failing nvidia module, login as root and run:
pacman -S nvidia
now you can start X and it should work :-)
so it worked for me

Problem After Update Kernel Version.

I have Problem after update my Xperia Z kernel version. When I upload or share some photos using "Xperia For Facebook" it is start to upload and finish without any problem. But the problem is i Can't see those photos in my Facebook Account .
pls help me.

*Moved to Android development*
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

NVidia driver`s problem (T410s) laptop-Windows 8

I have Lenovo T410s 2912RF6. And I have installed windows 8 pro 64x.
my problem is with nvidia driver.
Ive downloaded a lot of driver softwares (for windows 8 and 7) from Lenovo`s and Nvidia`s sites to fix my problem but non of them worked and my nvidia is still having a problem (the drivers could not be installed)...
i tried nvidia site auto detect to see my nvidia version and it shows (NVS 5100m)
but in lenovos site specifications for my latop model it says (NVS 3100m)
I downloaded the driver from Lenovos site but it didnot work also...
Please Help !!!
Solved!
Go to Solution.

The drivers from the Nvidia site don't appear to be an optimus build which you'd need. They're stand alone generic drivers.
Why the Lenovo package does not work may be the OEM Win8 when you installed Windows 8 is getting in the way. Try and clean it out including the Intel drivers and then reinstall that package you list below.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Skype problems after New update

Hello i was never got problems in skype.This is the first time... After the new update it's updated normally and restarted i signed in and for 1 minutes all normal , after it started to bug the grapics for example the chat messages are showed each in other ,two messages or more in one message and it's laggs , not only with chat is the problem with everything what i open in windows after new skype update.... if i close skype with quit skype everything is working fine.If i click on for example friends on skype half shows the friends half the recent and if i scroll down show one of my friends in list bugged in.I think i can't even tell how looks like if i minimalize a part of skype is on my wallpaper still bugged like v**it.I tryed to reinstall serval times with older versions and with newest versions but the older version's installers doesn't work because show an error messsage:Can't communicate with the server.After reinstalling the newest version i click one skype one of my friends and shows the following error message:Not enough storage to process this command.And the chat windows appears still like v**it.Web skype client works fine i don't know the PC versions of skype why doesn't work please help me.It's urgent. PS:I looked and my ram is not full ,on disk i have 40gb on C: and 71gb on D: Pc specs:Name:Asus EEE Pc 1005HGO/1005HBO1gb ram.Intel Atom 1Core 1.66ghzIntel GMA 945 140GB HDD If you need more info i will send.Thanks for help. 1gb ram

Suzi.H wrote:
Hello, my skype ( downloaded from windows store ) is asking for update..In the store it won't show up in the updates, opening the app only "saying" you own this app..No any option to update..I uninstalled and re-installed it but still giving me the same message: It won't log me in because i need to update...Can't do it anywhere though...Very disturbing!! I updated my windows nd restarted the laptop and everything i can think of...The "modern" Skype from Windows store was disabled on July 7. http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/ The only Skype application you can use now in Windows 8/8.1 computers is Skype for Windows Desktop version. You should download and install this Skype version: http://www.skype.com/en/download-skype/

Nvidia Driver install problem after new kernel

Similar Messages

Maybe you are looking for