NWDI DTR ( Design Time Repository ) for use with XI

I know many people use CMS to do their XI transports - but is anyone using DTR for version control of XI objects? Any information would be much appreciated.

hi,
I have done in installing CMS without DTR, CBS, so maybe they are for managing of version of java sources.
if you are planning to manage java source like ejb, you may need to configure DTR, CBS during installing CMS.
thanks
venjamin

Similar Messages

Min max lot size time based for use with SNP and PPDS

Hi all, Is there anyway to set up time based min and max lot sizes? ie we want to have a Max lot size which is small for use with the first 3 months of our plan which starts life in SNP and then converts to PPDS and into blocks for block planning, but months 4 to 36 we want to leave as large max lot sizes as there is no need to have the small max lot sizes for the different horizon.
As far as I can see there is only a material/plant lot size and Max lot size and no way to have a different setting in a different time period.
Thanks
j

Hi John,
As you know, in the product master, the lot size maintenance is time-independent, so that obviously can not be used for your scenario. As per my understanding, to meet this using standard functionality, you can maintain multiple product specific t-lanes (for STRs) and PDSs (planned orders) with required lot size ranges and validity dates (for short or long term horizon). But, again since the validity of t-lanes and PDSs will not be automatically rolling forward so the updating the validities will be a challenge.
The other option could be to enhance the heuristic functionality at lot size selection step while creating order.
Regards,
Umesh

Is there a universal way to configure time capsule for use with magic jack plus?

I've got the magic jack plus connected to my time capsule. Works most of the time, but lately it's been dropping calls or I'll get error messages stating to check the internet connection. Most say its related to the router settings.

Note I do not own magic jack but it looks like a standard ATA voip adapter.
How is the TC setup in the network? ie is it bridged or main router.. Is there another router?
Being a non-apple product you will do better sticking with SMB compliant network names.. ie short no special characters no spaces.. Apple by default break these rules.
Also you may have port forwarding issues.. apple do not use upnp most windows and non-apple products will expect and so you might have to open the required ports not just for sip but the actual call RDP packets.
Even if you do open ports apple routers often break port forwarding. You might find it is easier to use a modem router or alternative standard router and bridge the TC.
Look at posts that deal with issues which will be common with airport extreme.
https://discussions.apple.com/thread/3662236?start=0&tstart=0
I would say it is not working because you have not forwarded the required ports.. or it just doesn't like Apple routers.. plugged into the Mac, the networking is handled by the Mac.. and is able to auto open ports.. non-apple products cannot generally do that.

DTR Design Time Repository

Hi,
I would like to start with the DTR configuration of my WAS 6.40, anybody can help me?

Hello,
Follow the link,
http://help.sap.com/saphelp_nw04/helpdata/en/cb/6acf38422f0244b960236643e3cc46/frameset.htm
I think this will give you a better answer rather than explaining in forum.
Regards,
Kaustubh

What is the use of Design Time Repository?

Hi Gurus,
What is Track?
What is DTR? and what it offers ?
what is CBS? and what it offers?
What is CMS ?and what it offers?
Please Give me some idea about this?
Thanks in Advance,
Dharani

SAP NWDI is also known as SAP JDI (Java Development Infrastructure). The latter term is considered to be obsolete.
NWDI consists of
- Design Time Repository (DTR)
- Component Build Service (CBS)
- Change Management Service (CMS)
The concept of the NWDI starts with a product and a software component (SC). The normal case is to have a one to one relationship between product and software component, one product is being developed and the relations between the components comprising the product are kept within a software component.
A software component comprises one or more development components (DC). A development component consists of a normal project created with the Netweaver Developer Studio, i.e. a Web Dynpro application. The software component can also have dependencies to other SCs.
All relations are defined in a SLD.
Since all DCs that makes a product is kept inside a software component, the relations between the DCs are intact and versions of the different DCs are always consistent in the SC.
To be able to develop a DC inside a SC, a Track has to be set up in the NWDI to support that development.
Details about the components:
Design Time Repository (DTR)
The DTR resemblance a filesystem and can be accessed via WebDAV. File and folder permissions can be configured for users or groups.
Each file is version controlled and it's possible to branch or merge files.
The main repository folder (ws) contains folders representing tracks in the NWDI. The files checked into the NWDI are files with no local dependencies. For instance, the classpath file in a project refers to local jar files and are of no use for the Component Build Service when the project is build on the server.
Component Build Service (CBS)
When a file is changed in the Netweaver Developer Studio, an Activity is created together with a Request. When the changes are done, the request is checked in to the DTR, the activity is then activated which trigger the CBS to build the DC on the NWDI. Usually an ear or war file is created. When the activity is released from the Netweaver Developer Studio, the ear or war file is deployed to a development system via the CMS.
When the CBS finds dependencies between DCs inside the Track, all dependent DCs are rebuild automatically.
It's possible to use the CBS to rebuild a DC or even a full SC.
Change Management Service (CMS)
Change Management Service is used to maintain tracks and keep track of what version is deployed on different servers in the landscape. CMS can also transfer code between tracks. This is often used when creating tracks supporting development of general components, development of main components and finally maintaining deployment of full solutions.
Transferring code between tracks in order to achieve merge and joins between deployed production versions.
The CMS consists of layers on each track.
Check-In - where initial source is loaded to the track.
Development - represents the deployment to a development system. Changes are deployed on a DC level.
Consolidation - represents the deployment to a consolidation system.
Assembly - Stage to accept a change. Combines all DCs to a full SC. Version number labels are possible to set here.
Test - represents the deployment to a test system. Changes are deployed on a SC level.
Confirm - Confirmation stage before moving the change to production.
Production - represent the deployment to a production system.
System State - Gives an overview of the different versions deployed on different systems.
Each layer have a history and the possibility to go back to an earlier state.
regards
Surender Dahiya

I recently purchased a new Mac Pro and have been trying to back it up on my Time Capsule for the first time. However, it says there is no available disk space. This time capsule was used with my old Mac Pro that had a Home vault open on it.

The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
My new Mac Book Pro does not have home vault open. But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available. Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
When I go into the time capsule - it shows me NOTHING as being in the backup datas. So, I don't know where to begin to delete all the old data off the
time Capsule and start with a completely empty machine.

Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
Here is how to do this:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab below the icons
Click Erase
The "Quick Erase" option will only take a moment or two
Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

Unlocked old iPhone 3GS for use with pay as you go sim in the UK on vacation. O2 sim works while ph plugged in. Unplugged, works short time and crashes. Sometimes won't even re-boot. Software on phone up to date as far as 3GS goes.

I brought an old IPhone 3GS to the UK on vacation for use with sim card. I had the phone unlocked with approval and instructions from ATT. Store in the UK recommended O2 pay as you go sim which works as long as the phone remains plugged into the wall. Once unplugged, it will work for a short time and then always crashes. Sometimes it will re-boot and crash again and sometimes it will not re-boot at all. One store told me to sync with itunes which I did on my Mac Book. I don't know if the sim is defective or if the software of the 3GS is just not compatible with the sim when on the battery. I have updated the software on the phone as far as it will go. Any suggestions? Maybe the phone is too old to use with the latest pay as you go sim cards. I am disappointed that this phone has not been reliable as a pay as you go and I have had to purchase a UK phone here in order to have a reliable phone.

There is nothing you can do. You bought an illegally unlocked phone off Ebay. A lot of sellers there will tell you it is unlocked but the first time you try to update the operating system it will put the lock back on to the carrier the phone was originally locked to. Sorry but unless the carrier it was locked to will unlock the phone I am afraid you have a very expensive paper weight now. You should have bought it from a reputable dealer instead of ebay.

Partitioning an ext. HD for use with Time Machine HFS+/FAT32

Hi, I hope that this question is not already answered somewhere - I did a couple of searches but couldn't find the answers I need.
I'm setting up an external LaCie 500GB HD (USB 2.0) for a friend, in order to use it for Time Machine backups (one partition) and as a non-backuped "data dump" (music / films etc.).
My plan is the following: Partition the ext. HD into a 200 GB HFS+ Journaled partition for use with Time Machine, and a 300 GB FAT32 partition for data (FAT32 to ensure the interoperability with PCs).
I have a couple of questions (apart from if you think the proposed setup is good in general):
1. The Time Machine partition would be used to back up a MacBook with a 120GB HD - in your opinion, is 200GB too much/enough/too less space?
2. In general, does Time Machine work with partitions on ext. HDs as seen in the setup I propose? (or should I use a drive with only one partition?)
3. are there any possible problems I might run into when partitioning a drive into two different file systems as HFS+ and FAT32?
4. Is it OK to use the Leopard Disk Utility for this or should I use another application?
thanks a lot for your answers!

Hi,
Could you please share the answers you found?
I'm going through a very similar situation...
Thanks!
Beto.

Best hard drive for use with Time Machine

Hi,
Has anyone determined what the best external hard drive is for use with Time Machine? Is there a particular one that works exceptionally well with Time Machine, or is it much of a muchness?
I'm looking for a Firewire 400 & Firewire 800 drive that STAYS ON all the time, and doesn't automatically spin down or spin up like the rubbish WD My Book drives do.

I can't tell you if it is the "best" hard drive for you to use with TM, but I'm quite happy with the 500 GB Buffalo Technology DriveStation Combo TurboUSB I bought recently. It is quiet, quite inexpensive for the capacity (I paid about $120 for one on sale at Fry's), & completely compatible with OS X & TM.
Best of all for me, it automatically powers down when my iMac sleeps. It also spins down after a time if the Mac's Energy Saver preference "Put hard disk(s) to sleep when possible" is checked; otherwise it remains spun up until the Mac is put to sleep or switched off.
It comes with "Turbo" USB & Memeo "AutoBackup" software, neither of which I installed. (The box didn't claim these extras came in a Mac version but both Mac & Windows versions were included on the CD.) Out-of-the-box, I reformatted the drive with the Apple Partition Map scheme & two partitions, a 160 GB one for cloning my internal drive & the rest for TM. The drive works perfectly for both uses & seems quite fast, as one would expect from a 7200 rpm SATA drive.

Partitioning an External 320gb drive for use with Time Machine and...

I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
Is this possible?
I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
Has anyone done this before?
Cheers-

Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8 Can't seem to download the upgraded software. Can anyone help?

Please review the System Requirements for the Time Capsule.
http://www.apple.com/airport-time-capsule/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Design Time Repository question.

Hi, I'm clustering my SOA Suite per a consultant and this documentation:
http://download-west.oracle.com/docs/cd/B31017_01/core.1013/b28939/j2ee.htm
In section 3.1.19 Configuring JNDIs for the Topic and Topic Connection Factory, it states:
Using Oracle Enterprise Manager 10g, follow these steps to configure JNDIs in the Design Time and both ESB repository instances.
Now I've followed these steps for the ESB repository, but I find it unclear as to what it's referencing with the "Design Time repository".
I'm having an issue where the SOAP WSDL's pull up without problem, but the SOAP Endpoint URI's always fail, and I'm wondering if this may have something to do with it.
Thanks for your help!
David

Hi Paolo,
I am doubtful about the use of NDS. This is because the libraries available with NDS will be for WAS 6.40 and EP6 SP2 i feel is on WAS 6.20. I am really not sure about this but my main point is that there may be library version conflict issues.
I dont think there is any plugin available for DTR.
But then DTR is a WebDAV based server. Hence any WebDAV client should be able to solve your purpose.
But this is a good thread. Hope others will also provide their suggestions on this.
Regards
Sidharth

What is an easy web-page creation program for use with MacBook Pro?

Can anyone suggest an easy web-page creation program for use with MacBook Pro? I have used FrontPage with my PC, but am changing to a MacBook Pro.

It largely depends on your skill level. Do you want to write web page code, or do you want to just design something and have it turn into a web page automatically?
If you are more of a designer, try these:
RapidWeaver
Freeway Pro
Muse
If you want to write web page code, try these:
Coda
BBEdit
Dreamweaver
If you really don't want to write the code and want the best experience for your viewers, and you want to spend the least amount of time on it, my recommendation is:
No program at all.
Instead, sign up with a web site company like:
WordPress.com (hosted by them) or WordPress.org (hosted on your server)
Squarespace
Wix
The reason is that these companies have fully operational, nicely designed web site templates that you just fill in with your words and pictures, and they are ready to go. They also give you these benefits:
Already designed to the latest web standards
Already designed to resist hackers
Already designed to work on all browsers
Already designed to automatically adjust the page for readability on desktop, laptop, tablet, and smartphone screen sizes
Already designed for accessibility
Already designed for Search Engine Optimization so that your page will be found on Google
Already designed with social media links built in if you want
It is not like the old days where you build a site in Front Page and you assume it will only be seen on a desktop computer. If you build it yourself with a web page program, do you have the knowledge to make a site that works on all of the different web browsers and mobile devices, and is friendly to search engines and social media? If you don't have those skills, working with a website company can be a lot better, faster, and more reliable than trying to hammer all of that out yourself using code in some app.

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

NWDI DTR ( Design Time Repository ) for use with XI

Similar Messages

Maybe you are looking for