OBIEE 11.1.1.6.0 insatallation - creating domain configuaration error
Hi,
I am trying to install OBIEE 11.1.1.6.0 on a windows 7 Home basic machine.
i have selected 'Enterprise install'.
At step 14 -i got error i.e creating domain has failed.In logs i found below message:
Please check logs file and give me any suggestion to get out of this error
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Thanks in advance
Narasimha
Check your installation steps as in this link
http://allaboutobiee.blogspot.com/2012/04/obiee-111160-step-by-step-installation.html
If helps mark
Similar Messages
-
OBIEE 11.1.6 Installation failing at Create Domain
Hi,
I am installing OBIEE 11.1.6 in Wndows 7 64bit machine.
I have installed all pre requisites as below :
Loopback Adapter
JDK 1.6.34 -in path C:\Java\Jre and set the same in Environment Variables for Path
have all memory required for installation
TEMP - C:\TEMP
TMP - C:\TMP
Created RCU and while installing it is failing during Create Domain.. When checked logs it says
CSF Entries will not be parsed since the AdminServer is unreachable
and also sometime with
Nodemanager.Property file not found.
Tried 2 or 3 times but no success. Kindly advise.
Database installed : Oracle 11.2.0 R2
JDK : JDK1_6_34
Thanks,
CkengAssuming you are trying to do Enterprise Install.
There is a known issue with weblogic10.3.5 with some specific network configuration.
Try following.
Download and Install Weblobic 10.3.6 manually. Do BI Software only Install and run configuration. -
Install OBIEE Failed When Creating Domain
Hi all,
I tried to install OBIEE on 64bit redhat linux, but failed when creating domain, the error log shows:
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An internal WLST operation has failed.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3126)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
the following steps(steps after creating domain) raised:
Caused by: java.net.ConnectException: t3://hostname:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination
It's unlikely a hosts file issue which I've met before.
Install OBIEE Failed on Linux 64bit
the log caused by hosts file shows:
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
BTW, the port was tested to be available.
any idea?
thanks in advance
Nathanielwe had this issue couple of days back ,,
Resolved by doing below
1. uninstall obiee 2. drop the repository 3, remount /tmp folder
with this we could successfully install obiee 11.1.1.7 -
OIM 11g configuration failed. Create domain step failed
Hi,
I'am facing problem in OIM installation. Here is the description of error :
Create Domain step failed
Bootstrap Domain Configuration
Log
Config Action Bootstrap Domain Configuration started
Create Domain
Error
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
Log
Create Domain
Step Create Domain started
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
The log file (C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-07_03-49-05PM.log) showed the following message :
[2012-06-07T16:10:46.953+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->24938fb1-a72a-427a-b318-a098773c53f6 StatusMsg:Starting Domain.
[2012-06-07T16:10:46.953+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] reportStartConfigAction: EXIT........
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0]
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2012-06-07T17:49:23.328+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@8ae380
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
Thanks in advance for help.
Thanks and Regards,
Prasad
Edited by: 938380 on Jun 7, 2012 5:52 AMactually when i restarted the configuration the test passed for create domain but it went on to fail in the apply java required file step
here is the link to the thread : OIM 11g configuration failed. Apply java required files step failed
Hoping for your help.. and thanks for the suggestions..
Regards,
Prasad -
OBIEE 11.1.1.6.0 installation error creating domain error
Hi Gurus,
I am trying to install OBIEE 11.1.1.6.0 32 bit in windows 7 RCU installed successfully but when i am installing 11G in at configuration progress for creating domain it is showing 0% only for long time and finaly it is showing creating domain failed.
when i checked log files in the inventory(c:\oracle\inventory) folder i found one error file as below
*'export' is not recognized as an internal or external command,*
operable program or batch file.
how i have to fix this error i tried more times it is showing the same error please any one help me.
plzzzzzzz any one help me i tried more times
Regards,
Edited by: 963851 on Jun 4, 2013 8:26 PMHi Satya,
Still i am unable to install after making all configuration which you have posted in the above posts and it is showing some different error as below:
In Err file (C:\Program Files\Oracle\Inventory\logs) it is showing
***** Could not locate the launcher command.*
*'export' is not recognized as an internal or external command,*
operable program or batch file.
In OUT file (C:\Program Files\Oracle\Inventory\logs) it is showing
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
D:\HOME\Oracle_BI1'
Running prerequisite checks...
To continue, OPatch will do the following:
*[Back up for restore] : Back up 3 files for Oracle Home restore in case of patching error.*
and you suggested that to install software only what is the difference between simple and software only install any where i will try that and get back to you.
Regards, -
Hi Everyone,
I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
1. Simple Install
2. Enterprise Install
3. Software only install (after installing Weblogic 10.3.4.0 separately)
Everything goes well till the step Bi Configuration->Creating Domain.
In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
Excerpt from install2011-07-29_06-13-21PM.out
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Launching NodeManager ...
Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess:
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
NMProcess: SEVERE: Fatal error in node manager server
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess: Stopped draining NMProcess
NMProcess: Stopped draining NMProcess
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
Node Manager starting in the background
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
at java.util.Hashtable.containsKey(Hashtable.java:314)
at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
at weblogic.NodeManager.main(NodeManager.java:31)
After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
Any help on this would be greatly appreciated.
Thanks and regards,
SubhoMy problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
Thanks if anyone help us!! -
OBIEE 11g 11.1.1.6.0 configuration creating domain failed
Hi
I am trying to install OBIEE 11.1.1.6.0. My installation failed during configuration stage of " Creating Domain".
When i check the log file i see the following error . can you please help me?
C:\OBIEE\Oracle_BI1\OPatch\opatch apply C:\OBIEE\Oracle_BI1\oneoffpatches\p6599470_111070_Generic.zip -oh C:\OBIEE\Oracle_BI1 -silent -jre C:\OBIEE\Oracle_BI1\jdk
OPatch failed with error code = 1
[2012-05-02T20:32:51.188-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 15] [ecid: 0000JSFjdb75yW^5xV_AiW1FcR_X000006,0] stderr=[java.lang.NoClassDefFoundError: Files[[
Caused by: java.lang.ClassNotFoundException: Files
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: Files. Program will exit.
Exception in thread "main" ]
Edited by: 931665 on May 2, 2012 7:55 PM
Edited by: 931665 on May 2, 2012 10:16 PMHi,
What sort of installation you are trying to do..???
Enterprise or Software only..?
From where you have downloaded the OBIEE 11g 11.1.1.6.0 dump..? edelivery or from other source..??
Your error is saying that patch +"p6599470_111070_Generic.zip"+ is missing.
Down load it from oracle and apply the patch. The details, How to apply the patch will be provided in that zip file only.
Thanks. -
OBIEE 11.1.1.5 create domain failed on AIX
I'm trying to install OBIEE 11.1.1.5 on AIX 6.1. I'm running the Enterprise Install. I've confirmed that the Enterprise Install is supported on AIX 6.1 even though the docs seem to say this isn't supported.
I got all the way through the install to the configuration. The configuration failed when trying to create the domain. The only errors I can see in any of the logs are java exceptions that mention a work flow failure.
Executing Task: Creating Domain
AdminServer port is 7001
trying to connect to vaathmr634 7001
Creating Weblogic Domain.
oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2957)
at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2475)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:633)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:736)
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:736)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Does anyone have any idea what might be causing this problem?
Thanks.
JerryI may end up having to go the Software Only route, although I'd like to avoid that.
The problem turns out to be not enough space in /tmp. I set TMP to a directory on a file system with more than enough space. I added -Djava.io.tmpdir='/my/temp/dir' to the runInstaller command-line options. The OBIEE install goes fine. The first step in the config with an Enterprise Install is to install WebLogic. That is what's failling. And it's failling because it's using /tmp, not the temp dir I specified, and /tmp is filling up. I'm working with Oracle to see if this can be changed. In the meantime it looks like I'll be opening a ticket to get space added to /tmp. And looking into the Software Only install...
Jerry -
Obiee 11g creating domain error
Hi,
I am installing obiee 11g on windows 7 ..when i'm installing obiee 11g when it came to last step 14 of 15 creating domain had failed..how can i resolve this issueHi,
The issue due to java and static IP are not pointing to weblogic domain creation steps that why its getting erro..few months back i too face this issues and resolve it please refer my blog
Solution: while installation Enterprise/Software type ...while installing weblogic server run like below comment
D:\OBIEE111160\wls1036_generic.jar
Weblogic 10.3.5/6 64bit installtion must run like below
go --> windows --->type run ==> cmd prompt -->
C:\>cd C:\java\jrockit-jdk1.6.0_29-R28.2.2-4.1.0\bin
C:\java\jrockit-jdk1.6.0_29-R28.2.2-4.1.0\bin>java -D64 -jar D:\OBIEE111160\wls1
036_generic.jar
and another thing please make sure static IP (looback adaptor and host\etc file should be pointing like below
Install Loopback Adapter with Static IP Address
http://www.oracledistilled.com/windows/configuring-the-loopback-adapter-on-microsoft-windows/
Note: hots/host/etc file the static ip should be set like below
# localhost name resolution is handled within DNS itself.
10.10.1.7 localhost Deva-PC
(IP address host domain name host/computer name)
For refer my blog
http://obieeelegant.blogspot.sg/2012/07/obiee111160-software-only-installation.html
Thanks
Deva -
OBIEE 11.1.1.7 Simple Install stuck at 0% Creating Domain step
Hello All,
I am trying to install OBIEE 11.1.1.7 on 64 but Windows7 Enterprise SP1 machine. I installed the Loopback adapter, added entry in host file for static IP and computer name, Installed latest Java in C drive at C:\Java
Installed 11g DB, ran RCU and it went though fine and then I started the OBIEE installer. It does not though any error but keeps waiting at step 13 of 15 at very first step, Creating Domain.
I don't understand where is the issue? Can someone help please?
Also it spends lot of time at Copying files step, approximately 45-50 minutes.I'm having exactly the same problem. I've done several of these installs...and each time forget this one silly requirement. Go to the environment variables TEMP and TMP and be sure there are no spaces in the path. (I just set them to c:\TMP). I would think by now Oracle would be able to support installs on Windows, but this problem seems to continue to plague these installs.
-
os:linux 64
obiee:bi_windows_x86_111130_64_disk
when create domain faild,
pls help me!!
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3177)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3037)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1646)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:636)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3147)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:687)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 moreHi,
I found the issue, that is I have installed once and uninstalled it. but some of the components still not released. This is the route cause for this issue,
Solution:
Go to Run-> Services.msc -> search for the Weblogic related services.
If we found any such services running/disabled or in any state. we need to remove them.
To remove them go to run--> regedit --> HKEY_LOCAL_MACHINE --> SYSTEM--> CurrentControlSet-->Services
and then remove/delete the service..
Restart the system and try for fresh install....
Its resolved my issue. -
OBIEE 11.1.1.7.0 installation hangs at Creating Domain
I am trying this installation for N times...Windows 7 professional environment, 6Gb memory.
Did several tries suggested by forum and web... like temp directory env variable is C:\TEMP and C:\TMP, disabled antivirus, installed java 6 at c:\Java, installed JRockit at c:\Java... Disable the sleep time, etc... and always hangs at the creating domain. Task Manager shows java and javaw with 0% CPU..
Loopback is installed and ok. Tried with Simple install and Enterprise Install.
I just checked the Cookbook: Installing and Configuring Oracle BI Applications 11.1.1.7.1 and it does not mention at issue at Enterprise Installation...
Pls. any hint or help ?
Txs. I appreciate.
Antonioyou don't need to install Java, as Java is part of the installables.
You might need to check whether your installables are not corrupted.
you don't need to set any env variables too. if you have created them, remove them.
is your machine 32 or 64 bit. what you are installing is it 32 ro 64bit do they match with the machine?
do you have a data base and is the RCU installed? ( if you are trying enterprise install)
for every fresh install, drop and recreate RCU schemas.
do you have Administrator access to your machine? with out this OBIEE will not be able to create folder etc.
Run the installation batch file as Administrator.
let me know your updates -
OBIEE 11.1.1.7.0 installation failed- Create domain error
we are facing this issue while installing OBIEE 11.1.1.1.7.0 on CentOS 7 64 BIT.
Configuataion Action Creating Domain has failed. Please check logs for details.
checking the logs under oraInventory, the logs says-
Oracle.as.provisioning.execption.ASProvWorkFlowException: Error Executing workflow.
The server was running fine but we been facing this issue for couple of days now.
I hope someone can help us with this issue.
thank,
parikProblem : Oracle Database 11g is not certified on the current OSWhat's your problem? Message seems to be clear. Windows 2008 Release 2 (important here is Release 2) requires 11gR2,not yet released for any Windows platform.
http://www.oracle.com/technology/tech/windows/index.html
Werner -
Creating domain for BI Publisher issue
Hello,
Im trying to create domain for BI Publisher 11.1.1.3.0.
When configuring JDBC there are two component schemas: BIP Schema and OWSM MDS Schema. For database I have MS SQL Server configured with required RCU schemas.
The strange part: when testing the configuration, one fails - the BIP Schema. In the result log I see a very strange ""SELECT 1 FROM DUAL"" test which is obviously for oracle and not MS SQL.
For the 2nd schema, the one with successful test, there is a valid test query.
Please help me understand what am I doing wrong, why is there an Oracle test query for a MS SQL database and finally why on earth only one test fails because for both i have the same database type.
The version of fusion middleware is the one that came with BI installer 11g (11.1.1.3.0)
If wonder why am I doing this manually it is because the BI installer hangs at step 11 Creating Domain for about 100 minutes and then exits with timeout. great programming!
Please give me any hint, advise i can use to make BI Publisher run.
thank you809239 wrote:
Hi Experts,
OBIEE 10.1.3.4.1.
I am able to login bi publisher though Administrator user. But am not able to login remaing users.
I am getting below error.
Oracle BI Publisher Enterprise
Reporting Login: Login failed: Please contact administrator for your username/password.
Error Details
Error Codes:
Please help above issue it is very urgent.
ThaksHi,
Refer to this post to make sure you have all the settings implemented correctly: ( http://onlineappsdba.com/index.php/2009/01/15/oracle-bi-publisher-admin-console-xmlpserver-login-issue-administratoradministrator/ ).
Also, check the log files to see if you can get more detailed error messages.
-Amith. -
We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......
Maybe you are looking for
-
Get Current Datetime in an XSL
How do I add a current Datetime to an XSL document? The following sample works in XALAN but not ORAXSL. date:new() returns nothing!? <?xml version="1.0"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" xmlns:date="http
-
Sql query runing slow with lower cost
Hello I am working on Oracle 11g and AIX.I have one sql query which is ruing slow as reported by user. When i am commenting few line of code it is runing fast. I noticed that the execution plan cost of first query is less and second ...as cost of scc
-
Backup and Data Migration Questions????
Sorry for the multiple post, posted to fast and placed in wrong post.... But anyway... I am considering getting the Droid X (Android 2.1) and I will be changing over from a Imagio (WM 6.5) and since I am new to the whole Android OS, I was wondering w
-
Apple Mail "enable" often is shaded under Acct Info Advanced
Apple Mail often gives me problems. At times my Mail screen is blank with no folders or in- box, sent, etc. I then go to Preferences > Account Information > Advanced and have to check Enable, which is shaded. When I do so, it asks if I want to "save
-
Please, help-me. Itunes says: "Don't have an iPhone, iPad, or iPod touch? Don't worry. Come back December 26 to download gifts from your computer.". How? site:https://itunes.apple.com/br/app/itunes-12-days-of-gifts/id579378728?l=en&mt=8. Please, help