OBIEE 11.1.1.6 OSSM scorecard and strategymanagement - change permissions

Dear Reader,
We are on our way to get a strategymap in to our production environment and i'm strugling with permissions. For a group of users I only want them to be able to follow an action link or to focus on KPI's but not to open them. Where can i restrict permission to open a KPI?
Thanks,
Gilles

Bump
Edited by: J.A.M on Mar 24, 2012 8:43 AM

Similar Messages

OBIEE 11.1.1.7.0 Skin and Style changes

Dear All,
I want to customize the skin and style in OBIEE 11.1.1.7.0.
I already did for OBIEE 11.1.1.5.0 and having fair idea of files and location for customization.
I used to copy s_blafp and sk_blafp from /opt/xyz/obiee/Oracle_BI1/bifoundation/web/app/res and copy it to
/opt/xyz/obiee/instances/instance1/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obips1/analyticsRes.
but here in OBIEE 11.1.1.7.0 i can see s_blafp, sk_blafp and s_Fusionfx is used in Dashboard login page.
1. My doubt is which S_and Sk_ file we have to deploy on CONSOLE ??
2. Can we follow the same Orcale white paper we used to follow for OBIEE 11.1.1.5.0 Customization ??
3. Any new document/ link for OBIEE11.1.1.7.0 customization
Thanks,
Deep

Hi All,
Its a long time i have not seen this post.
i did the customization for OBIEE11.7 by myself.
Below is the answers for question raised:
1. My doubt is which S_and Sk_ file we have to deploy on CONSOLE ??
- Start working on s_blafp, sk_blafp
2. Can we follow the same Orcale white paper we used to follow for OBIEE 11.1.1.5.0 Customization ??
- Yes, Almost same.
3. Any new document/ link for OBIEE11.1.1.7.0 customization.
- NA.
Thanks

User permissions for wiki and calendar changed by themselves?

I am hoping I can describe this behavior properly. I add a new group using an administrator's account logged into the web interface. I go to that groups settings page and delegate group admins and read/write and read only users. I add a bunch of calendaring appointments into the calendar and all is good. One of the users logs in and adds her own calendaring information as well and modifies the wiki pages. Fast forward a week or so and now she is only read, she cannot edit wiki pages and cannot interact with the calendar.
Here are the verbose logs from wiki services:
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[calendarserver.provision.root#debug] Wiki lookup returned user:
blahblah
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[calendarserver.provision.root#debug] Wiki user record for user
blahblah :
<OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAPv3 /127.0.0.1)]
C1EF4B6C-178A-4937-A8D3-AF535400FC3F(blahblah) 'blahblah'>
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[calendarserver.provision.root#debug] Wiki-authenticated principal
C1EF4B6C-178A-4937-A8D3-AF535400FC3F being assigned to authnUser
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[calendarserver.provision.root#debug] Wiki principal servicedepartment
being assigned to authzUser
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[twistedcaldav.directory.wiki.WikiDirectoryService#info] Returning
existing wiki record with UID wiki-servicedepartment
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[twistedcaldav.directory.wiki.WikiDirectoryService#info] Returning
existing wiki record with UID wiki-servicedepartment
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[twistedcaldav.directory.wiki.WikiDirectoryService#info] Returning
existing wiki record with UID wiki-servicedepartment
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[twistedcaldav.extensions#info] REPORT
/calendars/_uids_/wiki-servicedepartment/calendar/ HTTP/1.1
2011-03-28 14:58:41-0700 [-] [caldav-8011] [-]
[calendarserver.provision.root#debug] Wiki principal servicedepartment
being assigned to authzUser
2011-03-28 14:58:41-0700 [-] [caldav-8011] [-]
[twistedcaldav.directory.wiki.WikiDirectoryService#info] Returning
existing wiki record with UID wiki-servicedepartment
2011-03-28 14:58:41-0700 [-] [caldav-8011] [-]
[twistedcaldav.directory.wiki.WikiDirectoryService#info] Returning
existing wiki record with UID wiki-servicedepartment
2011-03-28 14:58:41-0700 [-] [caldav-8011] [-]
[twistedcaldav.directory.wiki.WikiDirectoryService#info] Returning
existing wiki record with UID wiki-servicedepartment
2011-03-28 14:58:41-0700 [-] [caldav-8011] [-]
[twistedcaldav.directory.wiki#debug] Looking up Wiki ACL for: user
[C1EF4B6C-178A-4937-A8D3-AF535400FC3F], wiki [servicedepartment]
2011-03-28 14:58:41-0700 [-] [caldav-8011] [QueryProtocol,client]
[twistedcaldav.directory.wiki#debug] Wiki ACL result: user
[C1EF4B6C-178A-4937-A8D3-AF535400FC3F], wiki [servicedepartment],
access [read]
In this case the group is servicedepartment and the user is blahblah, who I just added using an admin to the group as a read/write user.
So the question is this- is there a way that I can use the command line to verify and or change permissions for users if this happens in the future? I am really digging the calendaring and wiki features, but I cannot recommend them for use by the company if their accounts stop working all of a sudden…
Many thanks for any tips!

Turns out they didn't change themselves, but authentication got out of whack. This post fixed it for me, but I just jogged access on ical and blogs. Not sure which or both is needed, but after I toggled them over and back I was up and running again.
<SNIP>
Solution found athttp://michaeljin.wordpress.com/2010/01/05/locked-out-of-mac-os-x-server/
It’s blog update time! Updates have been a little scarce lately, been super busy with getting trophies on PS3
Anyway, recently encountered the following with a Mac mini server running Snow Leopard Server:
Despite being able to ARD / Screenshare the Mac mini, I was unable to get any further than the login window. Authentication credentials are obviously valid. No weird access permissions have been set. However, the weird thing was, I can connect to the server via Server Admin tools (from another Mac) and all other services were running without a hitch.
After much head scratching it turns out to be a sACL (Service Access Control List) issue.
This thread solved the mystery!
http://discussions.apple.com/thread.jspa?threadID=1654864
To save you the trouble, I’ll lay it out here. I cannot take credit for this, but Randall can!
Open Server Admin on a computer (any), and connect with the local admin to the machine.
Select the server and authenticate.
Select Settings, then go to Access. You’ll want to make sure that Login Window and SSH have the local admin account listed if you select the option to “Allow only these users”. For now, I would suggest making sure all services have “Allow all users and groups” selected.
If (as in my case) it was set to Allow All in the first place, simply toggle the settings – back and forth.
Save.
Try logging in again… should be a good one!
</SNIP>

Scorecards and Dashboards

Scorecards and Dashboards
According to Harvard Business Review, Balanced Scorecard concept is the most influential management idea in the past 75 years.
The performance of an organization is tracked against four key perspectives such as Finance, Customers, Internal Processes and finally Learning, Innovation and Growth. These perspectives are divided into multiple sets of Key Performance Indicators ( KPIs ) and grouped against these perspectives and further broken from top level to the employee level KPIs. World over companies are moving towards implementing enterprise wide organizational Balanced Scorecard.
Simplicity, personalization and empowerment are the keys while building Agent Dashboards. These goals are achieved through the application of Business Intelligence ( BI ) concepts. A contact center performance is an aggregation of every agent performance.
An Agent should be able to customize and get the unified view of the aggregated metrics and track them on daily basis. How much he has achieved with respect to target? How his performance benchmarked with respect to overall call center performance. Is there performance improvement over a period of time? He can drill down and see which particular KPI is bringing his overall score down and he can see how he has or has not been able to improve his performance over a period of time.
A Supervisor should be able to see how agents under him are performing. His Dashboard should show an aggregated score of all his agents and simultaneously showing tabular information of comparative scores of all agents working under him. He can drill down on agent score who are not performing well. He can see individual KPIs of agents and study whether there are improvements over a period of time under the respective KPI.
Manager would like to see dashboards of aggregated scores of supervisors on weekly basis rather than daily basis. He can drill down till agents individual KPI level if he desires. A manager could also drill down against different channels and see the performance of different supervisors under different channels.
Call Center head would like to see the aggregated performance of his senior managers and across channels and will be interested to track performance against KPIs on monthly basis. He can drill down from manager level right up to the agent level and their individual KPIs to see where the actual pains are located.
Quality Managers would like to see how agents are performing against quality related KPIs. He would further like to analyze poor performing KPIs against type of service requests, type of channel and may be against important set of clients so that specific training programs could be designed for specific sets of agents rather than a plane blanket approach where every one is trained for everything.
In all the performance metrics could be analyzed against multiple dimensions such as channels customers, type of services, location etc. Users down the line are empowered to analyze the data and able to get operational and strategic insights. Hundreds of variants of Dashboards and Reports could be created from a simple single user friendly interactive interface
All above could be simply achieved through web browser and single user interactive interface. Every person in the organization can personalize the dashboard or reports from this single user interface. The power of analysis is coupled into the reporting and dashboard. It is this Business Intelligence capability that creates the unique customer experience in getting the insights of business.
By:- Sanjay Yadav

Hi Pradeep,
there are several how-tos available on SDN and also the xApps are available on the Service Marketplace as example.
Also check the Visual Composer Site:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/8196d631-0e01-0010-0590-d9ec6e1693a5 [original link is broken] [original link is broken]
Best Regards,
Marcel

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

OBIEE UI Interface is missing prompt functionality and Column Selector

Hi,
OBIEE UI Interface is missing prompt functionality and Column Selector in Answers when creating a report. This problem occurs on all the reports. Also the problem occurs in firefox too. Could you please suggest me any suggestion to overcome this issue.
Thanks and Regards

May sound stupid, but do you have the Privileges to add these things to a report? These features can be turned on/off from the Privilege Administration Screen, for a group or user. Have a look.
Cheers,
A.

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to iCloud pops- up constantly. My iCloud account is registered with an old email and password. I do not remember the

I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to ICloud pops- up constantly. My ICloud account is registered with an old email address and password. I do not remember the password to my ICloud account, and ID address that my ICloud account is registered under is an old email adress which is deleted right now (the old mail account is deleted). I don’t have a rescue email adress and I don’t know the answers to the security questions, so I have no way of changing the ICloud password. A message asking me to sign in to ICloud pops up constantly, but I always just hit cancel. However, now I am unable to access Find My IPad. How do I get my ICloud account changed and registered to be under my current Apple ID (email) and password? It is possible to set the device as New Ipad?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

You don't have Add and Customize Pages permissions required to perform this action - but i do!

Hello.
I am having a similar problem to the one described by this post here:
http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
However, his resolution of changing web.config under wwwroot did not fix my issue.
Here is the situation on a recently upgraded SP2010.
1) Create a document library. Set the document template to "basic page"
2) give a user full control on the document library.
3) Go, under that users credentials, to the document library and create a new document.
4) Name the document whatever and hit create
5) a page is displayed which says the following: "Web Part Error:
A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
entire site :)
Giving the user "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
Things i have tried:
- Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
- set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
- Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
- Recreated test lists and was able to duplicate the behaviour
So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
Setting global site permissions is not an option.
Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
working.
This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
Any help appreciated thanks!

Hi,
Yes, you must have “Add and Customize Pages” permission
from site level to perform this action, the permission is not in list permission level.
You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
level.
Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
from site level.(site permissions)
Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
(you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
If you need further help, please let me know.
Hope this helps
Thanks!
Stanfford
Everything will be fine.

HT201304 It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.

Please help!
It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
Thanks for any support or information that I may be missing in order to fulfill my request.

There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
http://www.unwireddevicelink.com/features/
https://meraki.cisco.com/products/systems-manager
and Apple's system:
http://www.apple.com/osx/server/features/#profile-manager
I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
Regards.

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

PO and PO change

In one of our R/3 system , the IDOC(I looked this in transaction /nWE02) carries the same Message Type for the PO and POChange? But there is afield from NAST-AENDE, which tells whether it is a PO or POChange?
Whether this is Normal, because I was thinking that for PO and PO change there will be two different Message Types will be Binded?
Please Assist me. Thanks

Hi Mohan,
You need to do the following activities.
- Setup purchase order (EF) condition record (t/code NACE) for purchase order create and change.
- Setup purchase order (EF) procedures (t/code NACZ) for purchase order create and change.
- Setup purchase order (EF) output type (t/code NACT) for purchase order create and change.
- Setup ALE (BD64) and IDoc (WE20, WE21) configuration. For purchase order create - use Message type ORDERS and IDoc Type ORDERS04/05. For purchase order change - use message type ORDCHG and IDoc type ORDERS04/05.
- You can use program RSNAST00 to generate both IDocs.
Hoep this will help.
Regards,
Ferry Lianto

OBIEE 11.1.1.6 OSSM scorecard and strategymanagement - change permissions

Similar Messages

Maybe you are looking for