OBIEE :: GoURL problem
Hi All,
Need help in Go-URL in OBIEE, the scenario is given below.
I have to pass an ‘OR’ condition in Go-URL to the target report (i.e.) I have a line code which can have (Open, Closed, Finally Closed, NULL values) and I should send a condition like below one to the target report.
Line_Code not in (‘CLOSED’, ‘FINALLY CLOSED’) OR Line_Code IS NULL
So that I can have values in the target report other than above given values along with NULL values.
The two reports are from same subject area and based on same table as well, but we cannot send Key values/primary key as the Source report has aggregated values and multiple key values can’t be passed to the target report.
Any help in this regard is highly appreciated.
Note: I cannot place any filters in the target report as it is called by other reports as well.
Regards,
Sam
Create the target report as report with union:
1.The first report of union will have conditions
Line_Code is prompted
AND Line_Code not in (‘CLOSED’, ‘FINALLY CLOSED’) --> this condition set to 'Protected'
2. The second report will have condition
Line_Code IS NULL --> this condition set to 'Protected'
Similar Messages
-
Obiee 11g . problem with set default as columnname in interaction tab
Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
SrinivasHi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v -
Hi
I installation process, " *Please Specify a location for a valid JDK Installation*" error is coming. In my system java version 1.6.0_26-b03 is available. I was given the enviroment variable of CLASS_PATH,JAVA_HOME,PATH.
Same path java programm is working fine, but the same path was given in OBIEE installation above said error is coming.
Can you please guide and solve this problem.
Regards
M.PadmanabhanHi,
You must have a folder like the following : C:\Program Files\Java\jdk1.6.0_11 (Java Development Kit)
If not you can dowload a jdk and install from here :
http://www.oracle.com/technetwork/java/javase/downloads/java-se-jdk-7-download-432154.html
Regards
Adil -
Hi,
I'm installing OBIEE 10.1.3.4.1 in a dell laptop on Win Xp Pro SP3. When I click on setup.exe it starts the InstallShield Wizard and says 'Preparing Java(tm) Virtual Machine' and then says 'Running the InstallShield Wizard' and then the window disappears and nothing happens. I was able to install JDK 1.6.0_03. I have admin rights in the system, but have some limitations like cannot stop the Antivirus etc. Please help on how to get to the Options screen for the installation of OBIEE 10.1.3.4.1. This is frustrating since I cannot even cross the step 0 for installation.
Thanks
PradeepPradeep,
Seems like a weird problem..you are on right path. I'm guessing the BI dump might be corrupted during download. 2 things to check..
- Try installing it on different machine with the same dump else
- download BI 10 again and then try
Hope this is useful -
Hi
Friends
i have one query in obiee?
when i click download (pdf format) its working fine but we are facingBut we are facing some problems in column borders and Row borders which are appearing inconsistently.
How to reslove this problem . Kindly Help me
thanks
satyaIn your report specify the width and hight of the column manually cell padding etc.
Thanks
Sureshmettur
http://obieeperigod.wordpress.com/ -
Hi,
I have installed OBIEE 10.1.3.3.3 to Windows XP SP3 machine. Installation has been completed succesfully and I login to presentation services. I see the dashboard page fiirst time, but when ı click any dashboard tab or answers the login is required again and again. What may the problem for this login issue?
Thanks®ards.which webserver are you using? if IIS - under which account is it running?
-
Union report in obiee 11g problem
HI,
I build union report in obiee 11g.In that report i have one column i.e Financial month.I have excluded Financial month column in table view.
Now my requirement is I have to show results based Financial month at dashboard.For example if i select particular month in dashboard prompt,that month data has to reflect on dashboard.
For getting results I created one dashboard prompt i.e Financial month and kept 'is prompted' at report level.But am not getting results means if i select any value from Financial month prompt then the report on dashboard will not reflect.Please help me how to get data based on Financial month.
Regards,
Kumar.Hi,
you said about writing query in DB.......whether U meant of trying checking the query in toad..or something else..........
Since im giving only one join from dim to fact in the physical diagram........
But more than one join exist between those dim and fact, but im giving only one join mainly the primary key column of the dimension table to the fact table....Whether i need to give all the joins that exist(even if it has 2 or 3 joins between those fact and dim) tables....
If i give count distinct means it is giving count for every nation as 1....like i mentioned below
NATIONALITY<----------------------------------------------------->NATION COUNT
INDIA---------------------------------------------------------------------1
AUS------------------------------------------------------------------------1
CAN------------------------------------------------------------------------1
Since you said to check about depts of the particular column....i couldn't able to understand about "depts" that you meant????
Whether i made any logical mistake...........
thanks,
Harry...
Edited by: HariPrasad on Oct 10, 2010 9:55 PM -
OBIEE install problem on Windows 2008 R2 64bit server
Hi!
I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
I follow these documentations:
Oracle® Fusion Middleware
Installation Guide for Oracle Business Intelligence
11g Release 1 (11.1.1)
E10539-01
and
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
Then from JRockIT installed WLS_1035 generic.
Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
Tests I have done,
Install loopback adapter
Deinstall loopback
Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
Verified that we have static ip on the server
Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
And checked the installer logs everytime, no errors, no warning.
Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
Best regards,
AndersHi!
It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
Best regards,
Anders -
OBIEE-Answers Problems with NVARCHAR2 data type elements
Hello experts,
After we completed the .rpd development and ported to the real-time environment, when we try to create requests in Answers of Presentation services by selecting certain columns only and try to see results, we are getting an error if the columns are of NVARCHAR type. The error is given below.
This is stopping end users being not able to create any answers/requests. Please suggest how we can resolve this or if any specific things need to be done to solve the problem.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 87720170. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 24328, message: ORA-24328: illegal attribute value at OCI call OCIAttrSet. [nQSError: 17007] Error while executing OCIDefine routines. (HY000)Hello Damon,
Thanks for the response.
We have also tried to query the same data through SQL*Plus and it went well. We had no issues with any data. Also the .RPD is working in our local system with the same data, on windows OS. But when we port the .RPD in the Server (Sun Solaris) we are having problems with the columns which are considered as NVARCHAR2 in the database and VARCHAR in the Physical layer of BI.
We observed there is no NVARCHAR2 data type supported in BI administrator in building the RPD. Is there any other datatype supports the NVARCHAR2 datatype in BI?
Thanks,
Narasimha -
Obiee 11g problem with dimension time DATETIME
Hi experts!
I have a problem with a column of my time dimension. In my database I have a column called "DATE" and it has this format "01/12/2009 00:00:00" (property column is DATETIME) when I import this table in Oracle Administration I see the same format that my database but I want to see without any Hours,minutes...like this: "01/12/2009"
How can I fix this??
Thanks!!!Hi alex,
check the column name your passing and then cast it....the error is not related to that i suppose as it is internal assertion.
chk this http://tipsonobiee.blogspot.com/2009/06/error-nqserror-46036-internal-assertion.html
UPDATED POST
You can alternatively use oracle trunc function in the physical layer to trunc the timestamp.
1) go to the table where the date column is coming in physical layer
2) go to the general properties and select SQL and write the SQL of all the columns needed from that table like
select x,y,z,trunc(date) from table_name.
3) this truncates the timestamp
UPDATED POST-2
By the way which database are you using,if its oracle trunc works out....other databases it wont work
select trunc(sysdate) from dual in your TOAD and check out.
hope helps you,
Cheers,
KK
Edited by: Kranthi.K on Jul 27, 2011 3:15 AM
Edited by: Kranthi.K on Jul 27, 2011 4:01 AM -
OBIEE 11G - problem with calculating percentage
Hi,
I have a problem with calculating a percentage....
I have a 2 measures Success and Failure
where Success is a count(Response_key)
Failure is a count(failure_key)
I want Success/(Success+Failure) * 100
I am getting this value as a 0
Infact any column I take from the subject area and say count of that column and divide it by any integer say count(column1)/5 ,Say count of that column1 is 132 Eg: 132/5 , Its showing this value as 26.00 when I put decimal value to 2 , but it is 26.4...It is avoiding decimal values .
So in my case success/(success+failure) in which Dr is greater than Nr . Since we get the value as 0.something . It is showing 0 value
So , 0*100 it is showing me as 0%
Can anyone please help me on this ??
--SiriYes, you need to put cast in numerator alone to get the resultant output in double.
You can mark the post as Correct since your issue is resolved now.
Thanks -
OBIEE 10g: Problem on fact table mapping
Hi to everyone,
i have this situation:
1) i have 2 fact tables in phisical model (FHRCTR and HCTOT) this two table is the same in the FK columns.
2) the structure is: FHRCTR[month_fk, transaction_type, measure A], HCTOT[month_fk, measure B]. 'transaction_type' is an attribute of the table not dimension.
3) i have created a logical fact table with this two tables for source.
4) each field of logical table is mapped on the corrispetive field on the both phisical table, except for 'transaction_type' column having as source only FHRCTR table.
5) i've created a report with follow colums: month_fk, transaction_type, measure_A, measure_B
The problem is: if i create the report with the columns in point 5, the measure_B returns null values and the measure_A have a correct value.
Insteed if i create a report without 'transaction_type' column the value of Measure_B and Measure_A are correct.
I remind you that: 'transaction_type' in the logical fact table is mapped only on the FHRCTR table because on HCTOT it doesn't exist.
Can you help me to solve this issue?
Thanks832596 wrote:
Can you help me to solve this issue?
ThanksI guess when you set some aggregation rule for 'transaction_type' in a repository then all will be ok (for examplу - min). But you'll get results that you don't expect. -
OBIEE 10q problem with user authentication - only administrator is working
Dear colleagues, i am facing to problem in our OBI solution,
From some time I am able to connect only wih Administrator account. User accounts defined in rpd are not working. I am not using LDAP.
The error logs are enclosed:
Any idea what to check please?
Thanks for support,
Michal.
Stav: 08004. Kód: 2718234696. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 46036] Internal Assertion: Condition dbIDs.size() == 1, file server/Metadata/Security/Src/SSDBAuthenticator.cpp, line 31. (08004)
Log1
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.0.080726.1900.
2012-03-29 14:31:40
[16020] Metadata Database Type: Oracle 10g R2
Data Source Name: PRODLI1
Data Source Type: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64b
2012-03-29 14:31:40
[46036] Internal Assertion: Condition dbIDs.size() == 1, file server/Metadata/Security/Src/SSDBAuthenticator.cpp, line 31.
Saw Log
Type: Error
Severity: 40
Time: Thu Mar 29 15:00:29 2012
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-3856
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 2718234696. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 46036] Internal Assertion: Condition dbIDs.size() == 1, file server/Metadata/Security/Src/SSDBAuthenticator.cpp, line 31. (08004)Hi satya,
thank for your cooperation and help.
I checked:
1. Go --> settings--> Administrator--> Manage privilege--> access dashboard--> give permission everyone Fullcontrol.
It's O.K., same for access answers and deliveries
1. Are you created users in your rpd?
YES in rpd file in security manager "users", "groups"
2. which security are you implemented?
catalog object security
Object Level security by creating catalog groups
3. Are you changed any thing object level.
No.
I tried to create one new user "test" but I am not able to connect to application
I also tried to set one user to Administrators group in repository, reload BI, but without any success :-( -
Hi experts,
We are getting problem in security..
1. User A having the access to dashboards 1 ,2 and 3
When user login he is able to see all the dashboards and some time he is able to see dashboard 1 and 2 .
He is not able to see the dashboard 3 . So where is the problem..
Please suggest.
Thanks,
FEach user when logged in, will have an entry in NQQuery.log for the session variable to pull the groups. Just check each SQL gets run OK - failure to , will mean no groups for that session (so maybe they only then see dashboards that 'everyone' can see)
-
[root@localhost bin]# ./startWebLogic.sh -Dweblogic.managment.username=weblogic -Dweblogic.management.password=Barcelona85 &
[1] 6626
[root@localhost bin]# SVR_GRP =
JAVA Memory arguments: -Xms256m -Xmx1024m
WLS Start Mode=Production
CLASSPATH=/middlewarehome/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/middlewarehome/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/middlewarehome/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/middlewarehome/jrockit_160_24_D1.1.2-4/lib/tools.jar:/middlewarehome/wlserver_10.3/server/lib/weblogic_sp.jar:/middlewarehome/wlserver_10.3/server/lib/weblogic.jar:/middlewarehome/modules/features/weblogic.server.modules_10.3.5.0.jar:/middlewarehome/wlserver_10.3/server/lib/webservices.jar:/middlewarehome/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/middlewarehome/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/middlewarehome/wlserver_10.3/server/lib/weblogic.jar:/middlewarehome/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/middlewarehome/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/middlewarehome/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/middlewarehome/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/middlewarehome/oracle_common/soa/modules/commons-cli-1.1.jar:/middlewarehome/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/middlewarehome/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/middlewarehome/wlserver_10.3/common/derby/lib/derbyclient.jar:/middlewarehome/wlserver_10.3/server/lib/xqrl.jar
PATH=/middlewarehome/wlserver_10.3/server/bin:/middlewarehome/modules/org.apache.ant_1.7.1/bin:/middlewarehome/jrockit_160_24_D1.1.2-4/jre/bin:/middlewarehome/jrockit_160_24_D1.1.2-4/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1430-linux-ia32, compiled mode)
Starting WLS with line:
/middlewarehome/jrockit_160_24_D1.1.2-4/bin/java -jrockit -Xms256m -Xmx1024m -Dweblogic.Name=AdminServer -Djava.security.policy=/middlewarehome/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true JAVA_OPTIONS= -da -Djavax.net.ssl.trustStore=MW_Home/wlsserver_10.3/server/lib/DemoTrust.jks -Djavax.net.ssl.trustStorePassword= -Dweblogic.ext.dirs=/middlewarehome/patch_wls1035/profiles/default/sysext_manifest_classpath -Dweblogic.managment.username=weblogic -Dweblogic.management.password=Barcelona85 weblogic.Server
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: JAVA_OPTIONS=
Caused by: java.lang.ClassNotFoundException: JAVA_OPTIONS=
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Could not find the main class: JAVA_OPTIONS=. Program will exit.were you able to solve this issue?
Did you tried installing the java without any spaces in the folder name?
like below path structure
c:\java\jdk
c:\java\jre
let me know if you need any more help
Maybe you are looking for
-
How do i get rid of the guest user account on my mac?
The guest user account keeps appearing on my login screen and i want to get rid of it, i do not want others to be able to access my account. How am i able to do this? I have tried to go on through the user section and nothing i seem to do in there he
-
Best IDE & Platform Configuration? What do you think?
What do you think the best IDE is out there? I want to compile and create applications as well as servlets and beans, but my focus would be on the beans, servlets, jsp, etc, the web stuff. Once I have the IDE for that, what is the best configuration
-
Changing the custom XML for a flash chart dynamically
Hello I am wondering if anyone has found a way to change the custom XML for a flash chart dynamically. For instance. On the www.anychart.com website their is a gallery with charts. I have studied one called "2Dlinetimechart. It has hours on the X-axi
-
Garageband on 2 ipads and a iPhone 4S - iCloud
I have an old iPad 2 and a new iPad air. I want to transfer my old garageband projects to the new iPad via iCloud. I upload the projects and there is a small cloud on the songs. On the new I do the same and on my iPhone. The songs on the new and on t
-
Hi All, Very High priority issue. Please help at the earliest. I am using auto batch det at delivery level wherein i have ticked del item cat for batch det. When I am creating delivery for plant 1 with mat x and cust y the system automatically gets t