Obiee 11g problem with dimension time DATETIME

Hi experts!
I have a problem with a column of my time dimension. In my database I have a column called "DATE" and it has this format "01/12/2009 00:00:00" (property column is DATETIME) when I import this table in Oracle Administration I see the same format that my database but I want to see without any Hours,minutes...like this: "01/12/2009"
How can I fix this??
Thanks!!!

Hi alex,
check the column name your passing and then cast it....the error is not related to that i suppose as it is internal assertion.
chk this http://tipsonobiee.blogspot.com/2009/06/error-nqserror-46036-internal-assertion.html
UPDATED POST
You can alternatively use oracle trunc function in the physical layer to trunc the timestamp.
1) go to the table where the date column is coming in physical layer
2) go to the general properties and select SQL and write the SQL of all the columns needed from that table like
select x,y,z,trunc(date) from table_name.
3) this truncates the timestamp
UPDATED POST-2
By the way which database are you using,if its oracle trunc works out....other databases it wont work
select trunc(sysdate) from dual in your TOAD and check out.
hope helps you,
Cheers,
KK
Edited by: Kranthi.K on Jul 27, 2011 3:15 AM
Edited by: Kranthi.K on Jul 27, 2011 4:01 AM

Similar Messages

  • Obiee 11g . problem with set default as columnname in interaction tab

    Hi Obiee gurus ,
    I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
    can Please give some suggestion for this problem.
    regards
    Srinivas

    Hi Srinivas,
    i guess this will be same for 11G
    Refer
    http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
    thanks,
    Saichand.v

  • OBIEE 11G - problem with calculating percentage

    Hi,
    I have a problem with calculating a percentage....
    I have a 2 measures Success and Failure
    where Success is a count(Response_key)
    Failure is a count(failure_key)
    I want Success/(Success+Failure) * 100
    I am getting this value as a 0
    Infact any column I take from the subject area and say count of that column and divide it by any integer say count(column1)/5 ,Say count of that column1 is 132 Eg: 132/5 , Its showing this value as 26.00 when I put decimal value to 2 , but it is 26.4...It is avoiding decimal values .
    So in my case success/(success+failure) in which Dr is greater than Nr . Since we get the value as 0.something . It is showing 0 value
    So , 0*100 it is showing me as 0%
    Can anyone please help me on this ??
    --Siri                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Yes, you need to put cast in numerator alone to get the resultant output in double.
    You can mark the post as Correct since your issue is resolved now.
    Thanks

  • Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?

    Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
    Using 10.6.8 on MacBook Pro
    Mikeaaa

    I am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think.  Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
    Thanks
    Mikeaaa

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • OBIEE 11G: Issue with Agent

    Hello All,
    I am trying to make agent work in OBIEE 11G together with Active Directory settings but the agent are failling for some users. Some users are not able to send the ibots:
    We get the following message with Agent Failed:
    Agent ID: XXXXXXX
    No devices for user: XXXX
    Agent ID: XXXXXXXX
    No Content for user: XXXX
    Kindly note that I have already checked the My Account of these users and the email address is well present there.
    Can anyone help us investigate on this issue.
    Thanks and Regards

    Where do you have your LDAP configured
    Is it in RPD or in Weblogic?

  • Problem with a time zone in Belarus, Minsk

    All Belarus users of Mac and iPhone/iPad have a problem with a time zone in Belarus, Minsk. If you set time in AUTO, then time going down for 1 hour from actual time. That is happened after Belarus didn't went for winter time this year. In this case on all Mac's and iPhones and iPad's didn't work at all Face Time, iMessage, iChat. Apple still not reacting for this problem.

    Same issue here... That is really annoying when such a good things like iCal sync just doesn't work.
    Also, in case if you trying fix it somehow... here is a lot of issues related to this one. e.g. if the time zone settings were set in manual order; we're get an authorization issue with applications like Twitter...

  • Hey Guys, problem with Flex Time.

    Hey Guys,
    i have a problem with Flex Time. I was searching for a way to copy my 1-Tackt Timplin Beat to make 12 out of it, but there were always "wholes" between the new inserted regions. So i found Flex Time, but then when i choosed a Region, pressed the Flex Time button, nothing happend, except that the Header became a little bit bigger, as if there would been added a few more options, but there came only more free space .
    Would be great if somebody could help me!:)

    I would suggest Option dragging the bottom right edge of the Region so it fits precicely to the grid, then copy.  This is a quick way to time stretch...

  • Problem with summer time

    It seems that Nokia Communication Centre has a problem with summer time.
    This is the behaviour:
    - the problem
    . both on the phone and on the pc, time zone is CET+1 and summer time is active
    . on the phone I have a message received at 10
    . in the Communication Centre the time of the message is 11
    - test 1
    . on the phone, time zone is CET+1 and summer time is active
    . on the pc, time zone is CET+2 and summer time is NOT active
    . on the phone I have a message received at 10
    . in the Communication Centre the time of the message is 10
    - test 2
    . on the phone, time zone is CET+1 and summer time is active
    . on the pc, time zone is CET+1 and summer time is NOT active
    . on the phone I have a message received at 10
    . in the Communication Centre the time of the message is 9
    I'm using:
    . Windows XP Pro, italian, SP2
    . PC Suite 7.0.7.0, italian
    . Nokia 7310 Supernova, italian language, V 08.20

    george_12358 wrote:
    > What can I do to fix it?
    http://www.adobe.com/go/d2ab4470

  • I have a problem with face time

    I have a problem with face time as the mobile is sending messages to a no in UK which is 00447786205094 and this charges me a lot and I notice that it is sending this message to activate face time

    That's what happens when you buy an iPhone intended for a different market. If you want to avoid this, sell it and buy a phone intended for your market.

  • HT201250 Unexpected problem with Mac time machine!

    Hi every one!
    I'm having an unexpected problem with my time machine! the moment I hook up the back up drive my Mac crashes and the only thing I can do is to force restart. I'm not sure if the problem is with the back up disk or the Time Machine itself. I've successfully used the app since now and this just happens! I can neither access the disk in finder nor fix it by disk utility... would you please help me?
    PS. the disk is encrypted, I doubt that might be causing the problem?!    
    Thank you!
    chargar

    Launch the Console application by entering the first few letters of its name into a Spotlight search. Enter the name of the crashed process in the “Filter” text field. Post the messages from the time of the last crash, if any -- the text, please, not a screenshot.
    Then, still in the Console window, look under User Diagnostic Reports for crash logs related to the process. Select the most recent one and post the contents -- again, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

  • Problem with a Timer (Java.util)

    Hello guys,
    I have a small problem with Java timer. The problem is I wanne do some task let's say after 5 seconds, so I created a timer and set its delay to 5000 milli seconds and run my program to see that the task is well performed but the program doesn't end. I tried the timer.cancel() method or tried to assign it to null.... but never works.
    So how do i make the program stop gracefully after the scheduled task finishes.
    My Code...
    int delay = 5000;  
              timer = new Timer();
              //timer.schedule(task, delay)
              final boolean flag =true;
              timer.schedule(new TimerTask() {
                   public void run() {
                        System.out.println("hello");       // the program is still waiting after executing this.... why?
              }, delay);
              // timer.cancel();     
              System.out.println("ccc"); // these two are printed gracefully before the scheduled task... that's good.
              System.out.println("ddd");So any idea on how to solve this problem... make the timer stop after executing the required task.
    Thanks in advance

    Have a read of the JavaDocs, someone went to great lengths to write these to save you headaches like this.
    http://java.sun.com/j2se/1.5.0/docs/api/java/util/Timer.html
    Have a play around with this code un-commenting the cancel, runTimerInDifferentScope and garbage collection call to see how it behaves each time.
    import java.util.Timer;
    import java.util.TimerTask;
    public class TimerExample {
         public static void main(String[] args) {
              final Timer timer = new Timer();
              timer.schedule(new TimerTask() {
                   @Override
                   public void run() {
                        System.out.println("[A] After 1 second!");
                        //timer.cancel();
              }, 1000);
              System.out.println("[A]");
              //runTimerInDifferentScope();
              //System.gc();
         private static void runTimerInDifferentScope() {
              final Timer timer = new Timer();
              timer.schedule(new TimerTask() {
                   @Override
                   public void run() {
                        System.out.println(" After 1 second!");
                        //No need to cancel me, I will be garbage collected
              }, 1000);
              System.out.println("[B]");
    Forgot to mention that the call to System.gc() was necessary to clear the timer. This is not something you should depend on (the garbage collector) in your application. I used it in this example because it's likely it would never run with such a small program and plenty of heap space left. If in doubt then use timer.cancel() as with the first example.
    Edited by: michael- on Dec 15, 2009 12:42 PM

  • Old problem with precision time counting and /usepmtimer solution.

    Hello, all!
    There was a problem in Windows XP and 2003 Server with using QueryPerformanceCouner() function. Sometimes it can cause problem with precision time measurements on CPUs which support powersaving modes by changing clock frequency. The simplest solution for that was /usepmtimer key in boot.ini file which forces the system to use another timer.
    I just want to know does this problem appear in Windoes 7? And how to solve it since there is no boot.ini file in Windows 7?
    Thanks a lot!
    P.S. This is a page with detailed description of the problem:
    http://support.microsoft.com/default.aspx/kb/895980

    Hi ,
    There is official documentation released on userpmtimer for windows 7 operating system.
    Also the KB article only refere to the OS which have performance problem.
    After reading the below article , i feel that this problem is taken care in windows 7 / windows 2008 ( though there is no formal written documentation )
    http://blogs.technet.com/perfguru/archive/2008/02/18/explanation-for-the-usepmtimer-switch-in-the-boot-ini.aspx
    you can post in windows 7 dedicated forum, so that MVP / Microsoft Engineers and community members would suggest you with latest data if any.
    http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  • My Time Machine says there is no backup disk available.  I've never had any problems with my time machine.  I'm not technologically savvy, so if anyone can help, I'd appreciate it!

    My Time Machine says there is no backup disk available.  I've never had any problems with my time machine completing backups.  I was away from house with my laptop for about 9 days so I'm wondering if there is something I need to do now that I'm home to get it working again.  I'm not technologically savvy, so if anyone can help, I'd appreciate it!
    Thanks,
    Jana

    You can lose your ability to backup through TM for any number of reasons, but the most common is what happens after a update. If your drive still works, your best approach is to read this:
    http://www.chriscolotti.us/technology/how-to-fix-osx-mountain-lion-time-machine/
    The attached link contains helpful graphics, so don't worry if you're not tech savvy.

  • Problems with first time setup

    Hi to all and please be kind to this new applee.  I am vary familar with Windows but not Apple.
    I am having problems with first time setup.  Choice wifi network ZAJ34 has full connectino bars but requires a password to connect with it.  Tried to use "Connect to iTunes" and plugged in the USB cable.  Windows7 ran ok and "MyComputer\Apple iPod" shows up in Explorer.  All I get to is the screen that shows the cable pointing to the music symbol.  I am new to Applie iPod so I am totally lost.  I have the Apple iPod touch 8GB Black (4th Generation) CURRENT MODEL.
    Operating System - iPod touch User Guide (For iOS 5.1 Software) downloaded, not sure.
    Thanks
    Wayne

    I find this,
    Before restoring:
    Verify that you are using the latest version of iTunes. [How?  I am not past selecting a network.]
    Back up your device. [Do not know how, again, I am not past selecting a network.]
    Transfer and sync content to your computer. [Hooked up the USB cable and nothing happens.]
    Restoring your iOS device
    Connect your device to your computer. [Hooked up the USB cable and nothing happens.]
    Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices. Select the Summary tab, and click the Restore button. [iPod touch when it appears in iTunes under Devices, is it in Control Panel.  I looked in Device Manager and so only drivers etc.

Maybe you are looking for