Object handles in XI

Post Author: dbas
CA Forum: Migration to XI R2
Just in the process of upgrading to XI from 8.5. I can not see the object handles nor does the column highlight when a data item is selected. Any solutions anyone?

Hi Look at this thread discussed the same here
SXMB_MONI Error
Re: Regarding Abap Proxies & User Logins
Thanks
Edited by: Abhishek Agrahari on May 19, 2009 2:16 PM

Similar Messages

Image scaling problem with object handles

Hi,
I am facing scaling problem.I am using custom actionscript component called editImage.EditImage consists imageHolder a flexsprite which holds
image.Edit Image component is uing object handles to resize the image.I am applying mask to the base image which is loaded into imageholder.
My requirement is when I scale the editImage only the mask image should be scaled not the base image.To achieve this I am using Invert matix .With this
the base image is not scaled but it is zoomed to its original size.But the base image should not zoomed and it should fit to the imageholder size always. When I scale the editImage only the mask image should scale.How to solve this.Please help .
With thanks,
Srinivas

Hi Viki,
I am scaling the mask image which is attached to imageHolder.When i scale
the image both the images are scaled.
If u have time to find the below link:
http://fainducomponents.s3.amazonaws.com/EditImageExample03.html
u work with this component by masking the editImage.If u find any solution
for scale only mask ,plz share the same.
thanks,
Srinivas

Error locating in object handler(in pdf)

Dear friends,
I am running a report through 9ias,
when desformat=html then no problem comes,
but when desformat=PDF then in win98 based webbrowser
just a small image come.
and on click it
gives error -- Error in location object handler
passible location of viewer Microsoft Activex gallary.
( How can I download this patch from that site. i go there but nothing fing that can solve my problem).
,but in win2000 machine no prolem commes.
pls help me
Siddharth Singh([email protected])

Can you print to the Adobe PDF printer (I suspect you can not)? Are you logged in as the administrator? Can you find any of the job settings files? If the latter is the case, then you likely do not have permissions set to allow you to read the folder that has all the job settings. If you are not the administrator, you will have to get the administrator to find the folder (it is in one of the document and settings folders under Adobe for XP and under the Users (I think) on Win7) and grant you access.

Photoshop 7 - object handles no longer showing

Photoshop 7 has suddenly stopped showing object handles, so I am unable to resize or transform a portion of an image that I have selected. I can find no instructions as to how I can get the handles to show again. Can anyone help?

Invoking the Free Transform function (CTRL + T, or from the Edit menu) will cause the Transform Bounding Box to appear.
If you want to see the TBB all the time, select your Move Tool. In the Options Bar check the box labeled "Show Transform Controls."

DBCP - how are null connection objects handled?

We are using DBCP in a refactored web application that, in the past, used a locally written connection pool. This original pool always checked a connection object to see if it was NULL before handing it out. I was told that this was because the DB was unstable at one point and the pool was handing out connections that were null after a db restart.
I would like to know if this is an issue with DBCP. I can't image that it would be, this seems like a common enough situation. However, the higher ups are concerned that we have subtracted functionality by using DBCP.
Thanks,
-=bill

snorky,
Suck it and see. Suggest you tell the higher ups to go worry about "higher up" stuff, and leave the details to you... but I'd also cover my ass with a proven reversion strategy.

How is object handled with servlets?

Hi!
This is probably a very basic question, but I need to know. Does a servlet treat objects differently from any other Java class?
Consider you have the following class:
public class ClassC {
 private String strName = "John";
 public String getName() {
 return strName;
 public void setName(String name) {
 strName = name;
}Then we use a servlet to create a object of class ClassC:
 public void doGet(HttpServletRequest request, HttpServletResponse response)
 throws ServletException, IOException {
 String strFirstName= "Steve";
 ClassC c = new ClassC();
 c.setName("Lance");
 strFirstName = c.getName();
 response.setContentType("text/html");
 PrintWriter out = response.getWriter();
 out.println("<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">");
 out.println("<HTML>");
 out.println(" <HEAD><TITLE>A Servlet</TITLE></HEAD>");
 out.println(" <BODY>");
 out.println("strFirstName = " + strFirstName);
 out.println(" </BODY>");
 out.println("</HTML>");
 out.flush();
 out.close();
 } My question is what �out.println("strFirstName = " + strFirstName);� will print in a server on the webb?
Suppose you have a produced a ResultSet and you put that as a private variable in a class as in ClassC above. Suppose I use the same technique as in the doGet-method, and have methods that extract data from the ResultSet. Will each use user of the servlet get unique information or will every user get the same information?
I think (and hope) that each user will get unique information. Is this correct?
Regards
Jonas

As written... the object Class is local to to the doGet method. This means that each run of the doGet method gets its own instance of the object, and each user will get their own data.
If strFirstName or c was declared as a class member, then all users would get the same data (potentially):
//bad servlet:
String strFirstName = "Steve";
ClassC c;
public void doGet(...) ... {
 c = new ClassC();
}

How do you get a handle to a TestStand API SequenceCallModule Object?

I am trying to programatically specify the SequenceName for a sub sequence, created using the TestStand API called from LabView. SequenceName is a property of the SequenceCallModule object but I cant see how to get the object handle.
Can anyone help?
Regards
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.

Hi,
you can actually do this. I was speaking to Steve yesterday on this :
starting with the handle to the appropriate step (I've done it in the attached sequence file in TS, but should translate nicely to LV)
so I use the sequence to get the step by name
I can then get the step.module
then using the TESTAND ADAPTER API (and not the Teststand API)
I can use the module returned above with the SequenceCallModule class from the TestStand AdapterAPI then. (you have to know ahead of time what the appropriate module / adapter type is otherwise it will have problems)
Hope that helps
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Attachments:
3_0 using adapter specific sequencecallmodule.seq ‏39 KB

Handling static objects

Hi,
I would like to know how are static objects handled in java
Questions:
1) What is the lifetime of a static object.
2) can a static object called through any class on the jvm be reclaimed
to phrase the above question better, If a class has a static object can i free the memory at anytime.
3) Can i have links to handling of objects by the jvm if any.
Any pointers are highly appreciated.
Thanks and regards,
myraid_77

Static variables are associated with a class, not an instance.
So, as long as the class is loaded, the static variable will remain.
You would have to create your own classloader, and load a class ( containing the static variable ), through the classloader..... then later on null all references to the classloader, to unload the class from memory.
The easiest way to reclaim memory from a static variable is to set it to null.
regards,
Owen

Object Reference Not Set To An Instance Of An Object - Outlook Add-In - Add-In Express

Hi,
My Add-In has been developed in VS2010 using the Add-In Express pack.
Its a very simple add-in that shows an IT support ticket email detailing PC information. To use it, following installing the add-in, the user must select the tab in outlook and click on the Send IT Support Email button which will generate an Outlook Email
Template with specific information about the PC that I pull using VB.
It works fine in Windows 7 & 8, but throws an 'Object Reference Not Set To An Instance Of An Object' exception in Windows XP. Screenshot is shown below:
The code is below
Imports System.Runtime.InteropServices
Imports System.ComponentModel
Imports System.Drawing
Imports System.Windows.Forms
Imports AddinExpress.MSO
Imports System.Object
Imports System.Net
Imports System.Environment
Imports System.Net.NetworkInformation
Imports System.Windows.Forms.Application
Imports Microsoft.Office.Interop.Outlook
Imports outlook = Microsoft.Office.Interop.Outlook
'Add-in Express Add-in Module
<GuidAttribute("735B7BC8-DD2F-44D8-BC37-30D86769C065"), ProgIdAttribute("$safeprojectname$.AddinModule")> _
Public Class AddinModule
Inherits AddinExpress.MSO.ADXAddinModule
#Region " Add-in Express automatic code "
'Required by Add-in Express - do not modify
'the methods within this region
Public Overrides Function GetContainer() As System.ComponentModel.IContainer
If components Is Nothing Then
components = New System.ComponentModel.Container
End If
GetContainer = components
End Function
<ComRegisterFunctionAttribute()> _
Public Shared Sub AddinRegister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXRegister(t)
End Sub
<ComUnregisterFunctionAttribute()> _
Public Shared Sub AddinUnregister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXUnregister(t)
End Sub
Public Overrides Sub UninstallControls()
MyBase.UninstallControls()
End Sub
#End Region
Public Shared Shadows ReadOnly Property CurrentInstance() As AddinModule
Get
Return CType(AddinExpress.MSO.ADXAddinModule.CurrentInstance, AddinModule)
End Get
End Property
Private Sub AddInModule_AddInInitiatize(ByVal sender As Object, ByVal e As EventArgs) _
Handles MyBase.AddinInitialize
'Outlook 2010 = 14
If Me.HostMajorVersion >= 14 Then
AdxOlExplorerCommandBar1.UseForRibbon = False
End If
End Sub
Public ReadOnly Property OutlookApp() As Outlook._Application
Get
Return CType(HostApplication, Outlook._Application)
End Get
End Property
'Gets the MAC Address from the NIC Information
Function getMacAddress()
Dim nics() As NetworkInterface = _
NetworkInterface.GetAllNetworkInterfaces
Return nics(0).GetPhysicalAddress.ToString
End Function
Sub CreateTemplate()
Dim sHostName As String
Dim sDomain As String
Dim sUserName As String
Dim sOS As String
Dim s64 As String
Dim sMAC As String
Dim host As String = System.Net.Dns.GetHostName()
Dim LocalHostaddress As String = System.Net.Dns.GetHostEntry(host).AddressList(1).ToString()
Dim MyItem As Outlook.MailItem
'Finds the PC Number
sHostName = Environ$("computername")
'Finds the Domain
sDomain = Environ$("userdomain")
'Finds the Username logged into the PC
sUserName = (Environment.UserDomainName & "\" & Environment.UserName)
'Finds the Operating System
sOS = (My.Computer.Info.OSFullName)
'Shows the results collected from the getMacAddress Function in the sMac variable
sMAC = getMacAddress()
'Finds the Architecture of the Operating System - x86 or x64
If (Environment.Is64BitOperatingSystem) Then
s64 = ("64bit")
Else
s64 = ("32bit")
End If
'Creates a Template Email
MyItem = OutlookApp.CreateItem(Outlook.OlItemType.olMailItem)
'Configures the Sender as [email protected]
MyItem.To = "[email protected]"
'Shows the template
MyItem.Display()
'Shows all of the string in the Email Body
MyItem.HTMLBody = String.Concat("IT SUPPORT TICKET", " ", "<tr>PC Number: </tr>", sDomain, "\", sHostName, "", " ", "Username: ", sUserName, "", " ", "OS Version: ", sOS, s64, "", " ", "IP Address: ", LocalHostaddress, "", " ", "MAC Address: ", sMAC, "", " ", "Comment:", " ", "Please give a brief description of your problem attaching a screen shot if possible", " ") & MyItem.HTMLBody
End Sub
Private Sub AdxRibbonButton1_OnClick(ByVal sender As Object, ByVal control As IRibbonControl, ByVal pressed As Boolean) Handles AdxRibbonButton1.OnClick
'Runs CreateTemplate
CreateTemplate()
End Sub
Private Sub AdxCommandBarButton1_Click(ByVal sender As Object) Handles AdxCommandBarButton1.Click
'Runs CreateTemplate
CreateTemplate()
End Sub
End Class
I would appreciate any help with this whatsoever as I am pulling my hair out!!
Many Thanks!!
Chris

Hi,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your Add-in is developed using Add-in Express which is third-party, I suggest consulting Add-in Express forum:
http://www.add-in-express.com/forum/index.php for better support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

NoClassDefFoundError when trying to return a custom Object

Hi,
I'm trying to get some system memory info from a Windows machine using Java. I've written the C code and Java code and it all compiles fine. I can also use most of the methods in the two files. I have a problem with one method though. Its a method that is returning an object type that I created that mirrors a windows structure. Below is the code.
// Java Object to store the data
package agent.win32;
public class MemoryInfo{
int dwLength;
int dwMemoryLoad;
int dwTotalPhys;
int dwAvailPhys;
int dwTotalPageFile;
int dwAvailPageFile;
int dwTotalVirtual;
int dwAvailVirtual;
public int get_dwLength() { return dwLength; }
public int get_dwMemoryLoad() { return dwMemoryLoad; }
public int get_dwTotalPhys() { return dwTotalPhys; }
public int get_dwAvailPhys() { return dwAvailPhys; }
public int get_dwTotalPageFile() { return dwTotalPageFile; }
public int get_dwAvailPageFile() { return dwAvailPageFile; }
public int get_dwTotalVirtual() { return dwTotalVirtual; }
public int get_dwAvailVirtual() { return dwAvailVirtual; }
// Java Class that uses JNI
package agent.win32;
public class NIMSNT {
//Constructor
public NIMSNT(){};
static{
 try{
 System.loadLibrary("NIMSNT");
 catch (java.lang.UnsatisfiedLinkError e) {
 System.out.println (e);
 * check psapi.dll and psapi functions
 * return true if NT process can be enumerate
public static native boolean Initialize();
 * Description:The EnumProcesses function retrieves the process identifier
 * for each process object in the system
 * return value:the list of process identifiers
 * call psapi function EnumProcesses
public static native int[] EnumProcesses();
 * Description:The OpenProcess function returns a handle to an existing process object.
 * return value:If the function succeeds, the return value is an open handle to the specified process
 * call kernel32 function OpenProcess
public static native int OpenProcess(int Pid);
 * Description:The EnumProcessModules function retrieves a handle for each module in the specified process
 * return value:the list of module handles
 * call psapi function EnumProcessModules
public static native int[] EnumProcessModules(int hProcess);
 * Description:The GetModuleFileNameEx function retrieves the fully qualified path for the specified module
 * return value:the fully qualified path for the specified module
 * call psapi function GetModuleFileNameEx
public static native String GetModuleFileName(int hProcess,int hModule);
 * Description:The GetModuleBaseName function retrieves the base name of the specified module
 * return value:the base name of the specified module
 * call psapi function GetModuleBaseName
public static native String GetModuleBaseName(int hProcess,int hModule);
 * Description:function closes an open object handle
 * return value:true if succesfuly
 * call kernel32 function CloseHandle
public static native boolean CloseHandle(int handle);
 * Description:function gets system memory
 * return value:String
public static native MemoryInfo GetSystemMemoryInfo();
// C Structure (defined in windows.h)
typedef struct _MEMORYSTATUS {
DWORD dwLength;
DWORD dwMemoryLoad;
SIZE_T dwTotalPhys;
SIZE_T dwAvailPhys;
SIZE_T dwTotalPageFile;
SIZE_T dwAvailPageFile;
SIZE_T dwTotalVirtual;
SIZE_T dwAvailVirtual;
} MEMORYSTATUS, *LPMEMORYSTATUS;
// C code
#include <windows.h>
#include <string.h>
#include "agent_win32_NIMSNT.h"
#define MaxProcessNumber 10000
/** Type Definitions **/
typedef BOOL (WINAPI *ENUMPROCESSES)(
 DWORD * lpidProcess,
 DWORD cb,
 DWORD * cbNeeded
typedef BOOL (WINAPI *ENUMPROCESSMODULES)(
 HANDLE hProcess,
 HMODULE * lphModule,
 DWORD cb,
 LPDWORD lpcbNeeded
typedef DWORD (WINAPI *GETMODULEFILENAMEEXA)(
 HANDLE hProcess,
 HMODULE hModule,
 LPTSTR lpstrFileName,
 DWORD nSize
typedef DWORD (WINAPI *GETMODULEBASENAME)(
 HANDLE hProcess,
 HMODULE hModule,
 LPTSTR lpstrFileName,
 DWORD nSize
typedef struct _PROCESS_MEMORY_COUNTERS {
 DWORD cb;
 DWORD PageFaultCount;
 DWORD PeakWorkingSetSize;
 DWORD WorkingSetSize;
 DWORD QuotaPeakPagedPoolUsage;
 DWORD QuotaPagedPoolUsage;
 DWORD QuotaPeakNonPagedPoolUsage;
 DWORD QuotaNonPagedPoolUsage;
 DWORD PagefileUsage;
 DWORD PeakPagefileUsage;
} PROCESS_MEMORY_COUNTERS, *PPROCESS_MEMORY_COUNTERS;
typedef BOOL (WINAPI *GETPROCESSMEMORYINFO)(
 HANDLE hProcess,
 PPROCESS_MEMORY_COUNTERS ppsmenCounters,
 DWORD cb
/** Global Variables **/
ENUMPROCESSES EnumProcesses;
ENUMPROCESSMODULES EnumProcessModules;
GETMODULEFILENAMEEXA GetModuleFileNameExA;
GETMODULEBASENAME GetModuleBaseName;
GETPROCESSMEMORYINFO GetProcessMemoryInfo;
/** DLL Entry **/
BOOL APIENTRY DllMain(HANDLE hInst, DWORD ul_reason_being_called, LPVOID lpReserved){
 return TRUE;
* Class: nims4_agent_win32_NIMSNT
* Method: Initialize
* Signature: ()Z
JNIEXPORT jboolean JNICALL Java_agent_win32_NIMSNT_Initialize(JNIEnv * env,jclass clazz){
 HANDLE hpsapi=LoadLibrary("PSAPI.DLL");
 if (hpsapi==NULL) return FALSE;
 EnumProcesses=(ENUMPROCESSES)GetProcAddress((HINSTANCE)hpsapi,"EnumProcesses");
 GetModuleFileNameExA = (GETMODULEFILENAMEEXA)GetProcAddress((HINSTANCE)hpsapi, "GetModuleFileNameExA");
 GetModuleBaseName = (GETMODULEBASENAME)GetProcAddress((HINSTANCE)hpsapi, "GetModuleBaseNameA");
 EnumProcessModules = (ENUMPROCESSMODULES)GetProcAddress((HINSTANCE)hpsapi, "EnumProcessModules");
 GetProcessMemoryInfo = (GETPROCESSMEMORYINFO)GetProcAddress((HINSTANCE)hpsapi, "GetProcessMemoryInfo");
 if (
 NULL == EnumProcesses ||
 NULL == GetModuleFileName ||
 NULL == GetModuleBaseName ||
 NULL == EnumProcessModules )
 return FALSE;
 return TRUE;
* Class: nims4_agent_win32_NIMSNT
* Method: EnumProcesses
* Signature: ()[I
JNIEXPORT jintArray JNICALL Java_agent_win32_NIMSNT_EnumProcesses(JNIEnv * env, jclass clazz){
 DWORD aPids[MaxProcessNumber];
 DWORD cGot;
 jintArray Pids=0;
 if(EnumProcesses(aPids,sizeof(aPids),&cGot)){
 cGot /= sizeof(aPids[0]);
 Pids= (*env)->NewIntArray(env,cGot);
 (*env)->SetIntArrayRegion(env,Pids,0,cGot,(jint*) aPids);
 return Pids;
* Class: nims4_agent_win32_NIMSNT
* Method: OpenProcess
* Signature: (IZI)I
JNIEXPORT jint JNICALL Java_agent_win32_NIMSNT_OpenProcess (JNIEnv * env, jclass clazz,jint Pid){
 return (jint) OpenProcess(PROCESS_QUERY_INFORMATION | PROCESS_VM_READ,FALSE,Pid);
* Class: nims4_agent_win32_NIMSNT
* Method: EnumProcessModules
* Signature: (I[I)[I
JNIEXPORT jintArray JNICALL Java_agent_win32_NIMSNT_EnumProcessModules (JNIEnv * env, jclass clazz, jint hProcess){
 HMODULE hModule[MaxProcessNumber];
 jintArray jModule=0;
 DWORD cGot;
 if (EnumProcessModules((HANDLE)hProcess,hModule,sizeof(hModule),&cGot)){
 cGot/= sizeof(hModule[0]);
 jModule= (*env)->NewIntArray(env,cGot);
 (*env)->SetIntArrayRegion(env,jModule,0,cGot,(jint*)hModule);
 return jModule;
* Class: nims4_agent_win32_NIMSNT
* Method: GetModuleFileName
* Signature: (II)Ljava/lang/String;
JNIEXPORT jstring JNICALL Java_agent_win32_NIMSNT_GetModuleFileName(JNIEnv * env, jclass clazz, jint hProcess, jint hModule){
 jstring jName=0;
 char FileName[MAX_PATH];
 if(GetModuleFileNameExA((HANDLE)hProcess,(HMODULE)hModule,FileName,sizeof(FileName))!=0){
 jName=(*env)->NewStringUTF(env,FileName);
 return jName;
* Class: nims4_agent_win32_NIMSNT
* Method: GetModuleBaseName
* Signature: (II)Ljava/lang/String;
JNIEXPORT jstring JNICALL Java_agent_win32_NIMSNT_GetModuleBaseName(JNIEnv * env, jclass clazz, jint hProcess, jint hModule){
 jstring jName=0;
 char FileName[MAX_PATH];
 if(GetModuleBaseName((HANDLE)hProcess,(HMODULE)hModule,FileName,sizeof(FileName))!=0){
 jName=(*env)->NewStringUTF(env,FileName);
 return jName;
* Class: nims4_agent_win32_NIMSNT
* Method: CloseHandle
* Signature: (I)Z
JNIEXPORT jboolean JNICALL Java_agent_win32_NIMSNT_CloseHandle(JNIEnv * env, jclass clazz, jint handle)
 return CloseHandle((HANDLE) handle);
* Class: nims_agent_win32_NIMSNT
* Method: GetSystemMemoryInfo
* Signature: (I)Lagent/win32/MemoryInfo;
JNIEXPORT jobject JNICALL Java_agent_win32_NIMSNT_GetSystemMemoryInfo(JNIEnv * env, jclass clazz){
 jfieldID jfield;
 jobject jobj=0;
 MEMORYSTATUS stat;
 stat.dwLength = sizeof(stat);
 GlobalMemoryStatus(&stat);
 clazz=(*env)->FindClass(env,"agent.win32.NIMSMemoryInfo");
 if (clazz==0) return 0;
 jobj = (*env)->AllocObject (env,clazz);
 //set NIMSMemoryInfo object field
 // dwLength
 jfield=(*env)->GetFieldID(env,clazz,"dwLength","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwLength);
 // dwMemoryLoad
 jfield=(*env)->GetFieldID(env,clazz,"dwMemoryLoad","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwMemoryLoad);
 // dwTotalPhys
 jfield=(*env)->GetFieldID(env,clazz,"dwTotalPhys","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwTotalPhys);
 // dwAvailPhys
 jfield=(*env)->GetFieldID(env,clazz,"dwAvailPhys","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwAvailPhys);
 // dwTotalPageFile
 jfield=(*env)->GetFieldID(env,clazz,"dwTotalPageFile","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwTotalPageFile);
 // dwAvailPageFile
 jfield=(*env)->GetFieldID(env,clazz,"dwAvailPageFile","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwAvailPageFile);
 // dwTotalVirtual
 jfield=(*env)->GetFieldID(env,clazz,"dwTotalVirtual","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwTotalVirtual);
 // dwAvailVirtual
 jfield=(*env)->GetFieldID(env,clazz,"dwAvailVirtual","I");
 (*env)->SetIntField (env,jobj, jfield,stat.dwAvailVirtual);
 return jobj;
};I can use all of the methods in the Java/C code except for the the last native method public static native MemoryInfo GetSystemMemoryInfo(); . I get a NoClassDefFoundError when I try to use this method. I have a feeling that I'm just doing something stupid.
Thanks in advance,
John

Yes, exactly. I changed the name of that class and forgot to change it in the c code. Thanks for the feedback.
Also, if anyone is using this code as an example, you need to change "agent.win32.MemoryInfo" to "agent/win32/MemoryInfo" in the c code. If it is left as "agent.win32.MemoryInfo" you will get a ClassCircularityError when trying to make multiple calls to the NIMSNT.GetSystemMemoryInfo();.

Error while refreshing aw object from a job

Hello, I'm trying to make the refresh of the objects (dimensions + measures) in an analytic workspace, programmed in time using jobs.
If I execute the statements of the job manually in a Sql*Plus session, everything is right. But if I execute the same statements in a job, I've got errors.
For example, the next statement creates a job that refresh an aw dimension called DIM1, executing it each minute:
EXEC DBMS_JOB.SUBMIT(:job,'DBMS_AW.EXECUTE(''AW ATTACH SAC_AW.AW1 RWX;'');DBMS_AWM.REFRESH_AWDIMENSION(''SAC_AW'', ''AW1'', ''DIM1'');DBMS_AW.EXECUTE(''AW DETACH SAC_AW.AW1;'');',sysdate+1/1140,'sysdate+1/1140');
The analytic workspace is called AW1, and the user that contains it is SAC_AW. The user that contains original relational objects is SAC. This user executes the statements.
Then, if I execute:
EXEC DBMS_JOB.RUN(1);
I've got an error similar like this:
EXCEPTION thrown in cwm2_olap_aw_awutil.FetchAWLog()
AW command: 'show convert(REFRESH_AWDIMENSION('SAC_AW' 'AW1' 'DIM1' '')
text)'
AW Error Text
(MXMSERR00) El objeto de espacio de trabajo analítico _TARGETDIMNAME no
existe.
In SYS.AWCREATE!___COPYVRBTOVS PROGRAM:
_targetdimname
^
----- PL/SQL Call Stack -----
object line object
handle number
name
324EBC50 388 package body OLAPSYS.CWM2_OLAP_AW_AWUTIL
324EBC50
421 package body OLAPSYS.CWM2_OLAP_AW_AWUTIL
324EBC50 466 package body
OLAPSYS.CWM2_
OLAP_AW_AWUTIL
3250B63C 1010 package body OLAPSYS.DBMS_AWM
34930F70
1 anonymous block
2F3CFAA0 406 package body SYS.DBMS_IJOB
34D24084
272 package body SYS.DBMS_JOB
34884EE0 1 anonymous block
ORA-00942: la tabla o vista no existe
EXCEPTION thrown in cwm2_olap_aw_awutil.FetchAsStr()
AW command: 'show convert(REFRESH_AWDIMENSION('SAC_AW' 'AW1' 'DIM1' '')
text)'
----- PL/SQL Call Stack -----
object line object
handle number
name
324EBC50 388 package body OLAPSYS.CWM2_OLAP_AW_AWUTIL
324EBC50
473 package body OLAPSYS.CWM2_OLAP_AW_AWUTIL
3250B63C 1010 package body
OLAPSYS.DBMS_
AWM
34930F70 1 anonymous block
2F3CFAA0 406 package body
SYS.DBMS_IJOB
34D24084 272 package body SYS.DBMS_JOB
34884EE0 1
anonymous block
ORA-00942: la tabla o vista no existe
It's very strange, since I can execute the statements contained in the defnition of the job without problems in a dabase session.
My database version is Oracle 9.2.0.6.
Some idea ? Thanks a lot by your help.

Hi Suresh,
have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
Best Regards
Sven

Find the implementation class of a Business object

HI Gurus,
Is there any path in SPRO from where we can find the implementation class of a BOL object?
For an example, I am working with BuilHeader. The backend table for BUL Header which will be updated while modifiyng BuilHeader is BUT000. So how can we find the back end database table name or implementation class where the table BUT000 is updated?

Hi Suchandra Bose
the flow will go like this.
1) the data in the BOL structures moved to Genil Implementation Class which is defined in the below SPRO path
CRM->CRM Cross application components->Generic Interaction Layer/Object Layer->Basic Settings in this corresponding each and every component one Genil class and its Model information in the form of tables will be maintained.
2) Take for example BP component , for BP component CL_CRM_BUIL is the Generic Interaction layer class , with in the generic interaction layer class methods (Create_objects, MODIFY_OBJECTS, GET_OBJECTS) you will find a code snippet to get the * Handler class* , this handler class will inturn get the Interaction Layer classes to reach the API ,
get object handler
      lv_cl_object =
         me->handler_factory->get_obj_handler(
                                  iv_object_name = iv_object_name ).
3) This handler method will query the table CRMC_OBJIMP_BUIL to get the relevant handler class depending on which functionality you are implementing.
Thanks & Regards
Raj

Error Handling in WebUtil CLIENT_OLE2.get_obj_property

Hello,
we have a problem with the error handling in WebUtil's CLIENT_OLE2.get_obj_property function. The WebUtil version is 1.0.2 and the problem can be reproduced on the 9iAS, 9iDS and 10gAS as well.
Problem description:
The get_obj_property function does not throw a PL/SQL exception when it is given an invalid object as first argument (i.e. an object handle to an application that has intermittently been closed by the user). Instead, the function returns a NULL value and the control flow of our application code continues as if the function had succeeded. So the problem is that the get_obj_property function neither throws an exception nor can the failure be caught by calling WEBUTIL_CORE.IsError as this returns that no error occurred.
Example:
PACKAGE BODY word IS
OBJ_HND CLIENT_OLE2.OBJ_TYPE := NULL;
mydocs CLIENT_ole2.obj_type;
-- Start Word97
PROCEDURE wordopen is
BEGIN
obj_hnd := null;
obj_hnd := CLIENT_OLE2.create_obj ('Word.Application');
CLIENT_OLE2.Set_property(obj_hnd,'Visible',1);
END;
PROCEDURE test is
BEGIN
IF obj_hnd IS NULL THEN
wordopen;
END IF;
BEGIN
mydocs := CLIENT_OLE2.get_obj_property(obj_hnd,'Documents');
EXCEPTION WHEN OTHERS THEN
-- Word has probably been closed by the user
-- so just start it again and retry...
wordopen;
mydocs := CLIENT_OLE2.get_obj_property(obj_hnd,'Documents');
END;
END;
END;
If the procedure test is called once then the Word application is started and the procedure performs some work. The procedure could be called several times on the same Word instance but fails in case the user closes the Word application because the procedure does not get an exception or error from WebUtil's get_obj_property function. Only a JACOB Java exception is logged in the Java console of the user's computer - the PL/SQL code has no way of knowing that an error has occurred.
Possible solution / patch for webutil.pll:
The webutil.pll can be patched to throw an exception if it is given an invalid object handle. In webutil.pll version 1.0.2 in get_object_property, line 1205, just add the condition "(v_javaHandle IS NULL) or " at the beginning of the if-statement in that line so that an OLE_ERROR will be raised if v_javaHandle is NULL:
if (v_javaHandle IS NULL) or (v_javaHandle = 0) or (v_javaHandle='') or (v_javaHandle=-1) then
raise OLE_ERROR;
end if;
Can you confirm the error and re-release a patched webutil.pll at a later time?
Regards,
Andreas Leidner
infoteam GmbH Berlin

Hi
It is mentioned in webutil doc that, you must regenerate webutil.pll before using it; otherwise you’ll encounter error ORA-06508 when running a form with the attached library.
Hope this helps...
Regards,
Amatu Allah

How do I convert a condition integer to an object

I have a condition integer for conditional text that is applied to text. How do I convert the integer to a Condition Format object? Thanks in advance.
Rick Quatro

Rick,
It appears that Jang's idea is the general solution to converting an FDK object handle integer to an ES object. I imaging you were probably following this thread already, but this was the general answer to the same question about a document object.
http://forums.adobe.com/message/4476098
Russ

Libmtp error: could not send object info

I have an HTC One m8, and a laptop running Arch Linux. I installed gvfs-mtp, and my computer detects my phone and the files inside of it. I use the GNOME desktop environment, and it's default file manager.
If I try to transfer files to my phone, I get an error reading:
There was an error copying the file into mtp://[usb:003,005]/SD%20card.
"libmtp error: could not send object info".
I am not sure how to fix this. i tried reinstalling libmtp and gvfs to no avail.
I want to be able to connect my phone to my computer, and transfer files through my file manager. Any help would be appreciated..
Here's some output that may be relevant:
[saadnajmi@archlaptop ~]$ adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FA456WM01083 device
[saadnajmi@archlaptop ~]$ mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.
libmtp version: 1.1.8
Listing raw device(s)
Device 0 (VID=0bb4 and PID=0f63) is a HTC HTC One (MTP+ADB).
Found 1 device(s):
HTC: HTC One (MTP+ADB) (0bb4:0f63) @ bus 3, dev 5
Attempting to connect device(s)
ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
Android device detected, assigning default bug flags
USB low-level info:
bcdUSB: 528
bDeviceClass: 0
bDeviceSubClass: 0
bDeviceProtocol: 0
idVendor: 0bb4
idProduct: 0f63
IN endpoint maxpacket: 512 bytes
OUT endpoint maxpacket: 512 bytes
Raw device info:
Bus location: 3
Device number: 5
Device entry info:
Vendor: HTC
Vendor id: 0x0bb4
Product: HTC One (MTP+ADB)
Vendor id: 0x0f63
Device flags: 0x18008106
Configuration 0, interface 0, altsetting 0:
Interface description contains the string "MTP"
Device recognized as MTP, no further probing.
Device info:
Manufacturer: HTC
Model: HTC One_M8
Device version: 1.58.502.1
Serial number: FA456WM01083
Vendor extension ID: 0x00000006
Vendor extension description: microsoft.com: 1.0; android.com: 1.0;
Detected object size: 64 bits
Extensions:
microsoft.com: 1.0
android.com: 1.0
Supported operations:
1001: get device info
1002: Open session
1003: Close session
1004: Get storage IDs
1005: Get storage info
1006: Get number of objects
1007: Get object handles
1008: Get object info
1009: Get object
100a: Get thumbnail
100b: Delete object
100c: Send object info
100d: Send object
1014: Get device property description
1015: Get device property value
1016: Set device property value
1017: Reset device property value
101b: Get partial object
9801: Get object properties supported
9802: Get object property description
9803: Get object property value
9804: Set object property value
9805: Get object property list
9811: Set object references
95c1: Get Partial Object (64bit Offset)
95c2: Send Partial Object
95c3: Truncate Object
95c4: Begin Edit Object
95c5: End Edit Object
96f0: Unknown (96f0)
Events supported:
0x4002
0x4003
0x4004
0x4005
Device Properties Supported:
0xd401: Synchronization Partner
0xd402: Friendly Device Name
0x5003: Image Size
Playable File (Object) Types and Object Properties Supported:
3000: Undefined Type
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3001: Association/Directory
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3004: Text
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3005: HTML
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3008: MS Wave
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
3009: MP3
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
300b: MPEG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc48: Description STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc8c: Genre STRING data type READ ONLY
dc87: Width UINT32 data type ANY 32BIT VALUE form READ ONLY
dc88: Height UINT32 data type ANY 32BIT VALUE form READ ONLY
de9b: Video Four CC Codec UINT32 data type enumeration: 0, 859189832, 958804552, 1195724877, 827739479, 844516695, 861293911, GET/SET
de9c: Video Bit Rate UINT32 data type range: MIN 0, MAX 2000000000, STEP 1 GET/SET
de9d: Frames Per Thousand Seconds UINT32 data type range: MIN 0, MAX 60000, STEP 1 GET/SET
3801: JPEG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
3802: TIFF EP
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3804: BMP
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
3807: GIF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
3808: JFIF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
380b: PNG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
380d: TIFF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b901: WMA
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
b902: OGG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
b903: AAC
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
b982: MP4
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b983: MP2
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b984: 3GP
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc48: Description STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc8c: Genre STRING data type READ ONLY
dc87: Width UINT32 data type ANY 32BIT VALUE form READ ONLY
dc88: Height UINT32 data type ANY 32BIT VALUE form READ ONLY
de9b: Video Four CC Codec UINT32 data type enumeration: 0, 859189832, 958804552, 1195724877, 827739479, 844516695, 861293911, GET/SET
de9c: Video Bit Rate UINT32 data type range: MIN 0, MAX 2000000000, STEP 1 GET/SET
de9d: Frames Per Thousand Seconds UINT32 data type range: MIN 0, MAX 60000, STEP 1 GET/SET
ba05: Abstract Audio Video Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba10: WPL Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba11: M3U Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba14: PLS Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba82: XMLDocument
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b906: FLAC
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b981: WMV
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc48: Description STRING data type READ ONLY
de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc8c: Genre STRING data type READ ONLY
dc87: Width UINT32 data type ANY 32BIT VALUE form READ ONLY
dc88: Height UINT32 data type ANY 32BIT VALUE form READ ONLY
de9b: Video Four CC Codec UINT32 data type enumeration: 0, 859189832, 958804552, 1195724877, 827739479, 844516695, 861293911, GET/SET
de9c: Video Bit Rate UINT32 data type range: MIN 0, MAX 2000000000, STEP 1 GET/SET
de9d: Frames Per Thousand Seconds UINT32 data type range: MIN 0, MAX 60000, STEP 1 GET/SET
300a: MS AVI
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
300c: ASF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba83: Microsoft Word Document
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba85: Microsoft Excel Spreadsheet (.xls)
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba86: Microsoft Powerpoint (.ppt)
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
Storage Devices:
StorageID: 0x00020001
StorageType: 0x0004 removable RAM storage
FilesystemType: 0x0002 generic hierarchical
AccessCapability: 0x0000 read/write
MaxCapacity: 31896633344
FreeSpaceInBytes: 31628312576
FreeSpaceInObjects: 1073741824
StorageDescription: SD card
VolumeIdentifier: ##storage##ext_sd
StorageID: 0x00010001
StorageType: 0x0003 fixed RAM storage
FilesystemType: 0x0002 generic hierarchical
AccessCapability: 0x0000 read/write
MaxCapacity: 26667683840
FreeSpaceInBytes: 9365225472
FreeSpaceInObjects: 1073741824
StorageDescription: Internal storage
VolumeIdentifier: ##storage##emulated##0
Special directories:
Default music folder: 0xffffffff
Default playlist folder: 0xffffffff
Default picture folder: 0xffffffff
Default video folder: 0xffffffff
Default organizer folder: 0xffffffff
Default zencast folder: 0xffffffff
Default album folder: 0xffffffff
Default text folder: 0xffffffff
MTP-specific device properties:
Friendly name: (NULL)
Synchronization partner: (NULL)
libmtp supported (playable) filetypes:
Folder
Text file
HTML file
RIFF WAVE file
ISO MPEG-1 Audio Layer 3
MPEG video stream
JPEG file
BMP bitmap file
GIF bitmap file
JFIF file
Portable Network Graphics
TIFF bitmap file
Microsoft Windows Media Audio
Ogg container format
Advanced Audio Coding (AAC)/MPEG-2 Part 7/MPEG-4 Part 3
MPEG-4 Part 14 Container Format (Audio+Video Emphasis)
ISO MPEG-1 Audio Layer 2
Abstract Playlist file
XML file
Free Lossless Audio Codec (FLAC)
Microsoft Windows Media Video
Audio Video Interleave
Microsoft Advanced Systems Format
DOC file
XLS file
PPT file
OK.

i got the solution...........thanks every one

Object handles in XI

Similar Messages

Maybe you are looking for