Object loaded and saved with Read and Write Datalog are not compatible with packed library

Hi all,
I often use packed libraries to distribute my software.
My problem is the following:
I save a LabVIEW object of a class (MyClass) that is not included in a packed library using "Write datalog" (for example saved file is MyObject.dat).
If I load MyObject.dat using "Read Datalog" but using "MyCLass" saved in packed library as "Record type", Read Datalog generates an error or anyway loaded data is inconsistent.
In other word, if I save an object using as "Record Type" MyClass not included in a packed library and then I load saved file using the MyClass included in a packed library, file cannot be loaded.
Can you help me?
Thank all

I think you are running into an issue created by namespacing.
Point is, that lvlib as well as lvlibp create a level of namespacing:
I would expect that level of namespaces being part of the datalog file.
So essentially, if the class is not encapsulated in the very same namespace when reading in which it was written, it should fail with exactly the error you are describing.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
Hyper-v platform Is grayed out and When i move the mouse point to Hyper-v platform it shows a message.
"Hyper-v cannot be installed: A hypervisor is already running"
When I try to install vmware it says..
VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v...
For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
and
https://communities.vmware.com/community/vmtn/developer/forums
Good luck..

The product version and database version are not compatible

The following simple program gets an exception {The product version and database version are not compatible} its very hard to proceed from here. Does anybody know what cause this?
Best Regards
Jan Isacsson
using System.Collections.ObjectModel;
using Microsoft.MasterDataServices.Deployment;
using Microsoft.MasterDataServices.Services.DataContracts;
namespace MdsDeploy
    class Program
        static void Main(string[] args)
            try
                ModelReader reader = new ModelReader();
                Collection<Identifier> models = reader.GetModels();
                foreach (Identifier modelId in models)
                    Console.WriteLine(modelId.Name);
            catch (System.Exception ex)
                Console.WriteLine("Error: " + ex.Message);
            Console.ReadKey();

Hi Jan,
For the error "The product version and database version are not compatible", as Emma said, the version number of the Service does not match the database schema version.
In your scenario, which version of database are you using? Please note that MDS update required after SQL 2012 SP1 installation, please refer to the links below to see the details.
http://byobi.com/blog/2012/11/mds-update-required-after-sql-2012-sp1-installation/
http://msdn.microsoft.com/en-IN/library/gg488708.aspx
Regards,
Charlie Liao
TechNet Community Support

Objects (lines) and text boxes are not able to be made bigger or smaller

first of all: For no reason at all, all of my text boxes are now set up as threaded text. I dont know how that turned on. When i go to "type"
and try to select "threaded text" it wont allow me to select it - it is not highlighted. So I have no clue
how to turn this off. Now I can not stretch my text boxes to suit whats in them - ie: make them bigger or smaller, ie: there are only two boxes to drag - one at either side of text box and they wont allow me to drag them to make the box bigger - only to move the entire box (before there were 4 boxes to manipulate the size of the text box - one on each corner - now there are only two) and this seems to apply
to many other objects now. when i draw a line, I have to make sure that line is the exact right size because once i draw it - it wont allow me to make it bigger or smaller - it only allows me to move it to a different place - i dont understand what is happening

thanks for writing back
i am pretty sure it is area type because in type i can see "area type options"
i dont know how to turn bounding boxes on or off so I can not answer that question.
yes i should be able to resize the bounding text box by dragging and ive always been able to do that. however I can no longer do that. the usual bounding text box that i am accustomed to has little teeny boxes all around the entire box - in each corner - so i can drag each corner easily
this set up that has currenly taken over my illustrator program has only TWO little teeny weeny boxes that when selected wont allow me to drag them to resize at all. when i double click on one of these two little teeny boxes it gives me the thread text tool... which i dont want and have never even used before
i just want my text boxes and everything else to go back to normal so i can drag them to resize them again
does that make more sense or have i explained it better?
thanks for your help! Kim

Outlook 2002 Calendar and iTunes 7 are not compatible

Has anyone found a solution to the Outlook calendar problem? When I upgraded to iTunes 7 there was no notice about incompatibility problems with Outlook 2002. Is there anyone from Apple working on this? How do we get some support? I cannot find a way to communicate with them.

Your post is a little confusing. This is the "Installing & Upgrading iTunes for Windows" forum but your post says you have a Mac. To determine which version of OS X you have, go to the Apple menu in the far right of the Menu bar and select "About This Mac". What version of OS X does it tell you you have?
Second, if you truly do have an iPod Classic, which is the latest generation, it didn't come with a CD and it requires iTunes 7.6 or later.
See this link for identifying which iPod you actually have:
http://docs.info.apple.com/article.html?artnum=61688
Once you've figured out which iPod and which system software you have, you may want to consider posting in a more appropriate forum as you are likely to get more and better answers that way.
You can find older versions of iTunes here:
http://www.oldapps.com/downloadiTunesmac.php
Best of luck.

Iphone 4 and new update are not compatible

Tried to update my phone now it is completley screwed up and Apple says its a harware issue, and to fix it will be 150$ needless to say I am finished with iphone and apple. Has anyone else had this issue? Tried a total restore and still no luck.

No software update causes flakey hardware.
Either the update did not apply correctly or the hardware is failing.
Restore the device as new.
Stop whining.
If the issue persists, take the device to Apple for evaluation.

Having trouble with error message in itunes every since I had a new hard drive installed. Write access are not enough or permissions aren't allowed. I have changed all of these in the corresponding folders, restarted and nothing works. I need help bad??

Got a new hard drive installed and since then, I cannot get purchased song into my itunes. It is telling me that my write access or permission are wrong. I have changed all and nothing works. HELP!!!!!!

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

The new firefox 33.1 and 34 are not compatible with my school Blackboard account

I have used Firefox since it was first introduced. I prefer it to MS Explorer. However the new Firefox, 33.1 and 34 are not compatible with my school Blackboard account, so I had to delete Firefox and use Explorer. I would prefer to use Firefox. Is an earlier version (Prior to 33.1) still available?

It's been a few years since we have had many questions about Blackboard compatibility with Firefox, but overall the problems in that past had to do with either Blackboard not updating in a timely manner ''[which I don't think is the case any longer]'' OR the school wasn't running the latest version of Blackboard software ''[which considering the current state of many government budgets, may be the case now.]''.
''It appears that - http://www.blackboard.com/ - is a new or greatly modified website, as the bookmarks I have saved for reference pages on their website come as 404, so I can't find the information I have used in the past.''
My advice is to install Firefox Portable ESR to your hard drive for use at that Blackboard website and continue to use Firefox 34 for other purposes. The "portable" version will instal and use a Profile that is totally separate from your regular Firefox installation - so you can have two separate Firefox versions installed without any problems.
http://portableapps.com/apps/internet/firefox-portable-esr
'''ESR''' stands for Extended Support Release.

I have upgraded to elements 13 and unistalled 11 photos corrected in 11 are not compatible to print with 13

Help please my photos that I had been viewing printing etc are not compatible when I print in elements 13. I have unistalled elements 11 but still hve the same problem

When I try to print using elements 13 up pops The saved print information is in an incompatible version. it has been set to default values.
    I have templates that I had designed in elements 11 to drop photographs into, every time I try to print up pops the notice above and it will not print.
   If I have imported the photograph and worked on it in elements 13 it prints fine.
   I have hundreds of photographs that I have changed from raw files to Jpegs etc. which printed fine. Now with elements 13 I cannot print any of them.
   Help please, I was born BC before computers
Original message----
From : [email protected]
Date : 29/01/2015 - 19:51 (GMTST)
To : [email protected]
Subject : I have upgraded to elements 13 and unistalled 11 photos corrected in 11 are not compatible to print with 13
    I have upgraded to elements 13 and unistalled 11 photos corrected in 11 are not compatible to print with 13
    created by Barbara B. in Photoshop Elements - View the full discussion
What do you mean by "not compatible"? What happens, exactly, when you try to print?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7144769#7144769 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7144769#7144769
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding

I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding." I checked the catalogs and see that lrcat-Journal and lrcat-Lock have been created every time I try to open. I have a backup from the first day I upgraded, but Lightroom doesn't want to access it. Should I reinstall?

Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
It would help to know your OS.

I am using iCloud email and my emails are randomly disappearing before I can read them. They are not in any folders on my iPhone and I am having to call apple to have the last 7 days of email sent to me in order to retrieve what is being lost.

I am using an apple email account and my emails are randomly disappearing before I get a chance to read them. They are not anywhere on my device, not trash, junk etc. The only solution from apple has been to resend me the past 7 days of email in order for me to retrieve the missing emails. This has taken me hours on the phone with apple support with no solution. I just don't know what to do. They have gone over the settings with me and nothing has solved the problem. I don't know where to start since it is happening on all my devices.

Control-click on the background of the view all pages window and select "Preview Calendar" from the contextual menu.
You can also save the pdf as a file to compare to the printed calendar. If the two names are visible in the pdf file then the printed copy should show them. Contact Apple for a refund. Apple Print Products - Apple Store (U.S.)

How do I close multiple documents opened in Finder when the files are loading and the Application is not responding?

I was moving 90 files from one folder to another and instead accidently double clicked all the files I had selected and they all opened at once and now they are all stuck trying to load and the program is not responding.
When I put my mouse over the folders, it's just the loading cursor so i can't select anything. I've tried using 'command' - 'option' - 'W' and that doesn't work either.
I have tried restarting finder and all that does is shut all of the folders and reopens them and they get stuck trying to load all over again.
I have tried restarting my macbook and every time I log back in, it restarts all the programs and all the finder windows and the whole process repeats.
(even when I unselect the 'restart opened programs' box.)
I really hope someone knows how to troubleshoot this problem I am having!

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my computer. How do I get them to match so that I would be able to use my cellphone number?

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?

To reset any OS X program just go to the folder and trash the affected files.
Open a new Finder Window
Click "Go" in the above status bar
Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
Click Library while still holding the option/alt key and a new window will open with all of your system files
Go to the preference file (NOT Preference Panes)
Locate a file named <com.apple.FaceTime.bag.plist>
Locate another file named <com.apple.FaceTime.plist>
Locate the file <com.apple.iMessage.bag.plist>
Drag the files to the trash
Delete the trash
Close FaceTime and iMessage if not already closed
Relaunch FaceTime and iMessage from Applications folder
This should reset the program back to default. You will have to put your information back into the program but it should work.
Good Luck.

When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Object loaded and saved with Read and Write Datalog are not compatible with packed library

Similar Messages

Maybe you are looking for