Object reference not set error in SAP.Portal.Framework.Core.PortalWorkerReq
Hi,
I am using .Net PDK 1.0. I am often getting the error
[NullReferenceException: Object reference not set to an instance of an object.]
SAP.Portal.Framework.Core.PortalWorkerRequest.ReadEntityBody(Byte[] buffer, Int32 size) +119
System.Web.HttpRequest.GetEntireRawContent() +327
System.Web.HttpRequest.GetMultipartContent() +57
System.Web.HttpRequest.FillInFormCollection() +244
System.Web.HttpRequest.get_Form() +50
System.Web.UI.Page.GetCollectionBasedOnMethod() +70
System.Web.UI.Page.DeterminePostBackMode() +128
System.Web.UI.Page.ProcessRequestMain() +63
It is very errartic, sometimes the page gets loaded and at times I get this error. Could someone please tell me what causes this error?
Thanks
Swetha
Hi,
This error occurred in the page where I used the file upload control. The control was working fine before. We tried installing entire PDK again and then applying the hotfix-1, but nothing worked and then I had to use an URL iview to invoke an ASP .Net application just for uploading the files.
Thanks
Swetha
Similar Messages
-
Object Reference Not Set error using CrystalReportViewer
I have a web application in which I am attempting to use the CrystalReportViewer. Using Visual Studio 2008, I was able to get the viewer to run and display reports just fine. But since I moved to Visual Studio 2010, I've been unable to get it working again. I reinstalled Crystal Reports for Visual Studio 2010 and the x64 runtime. I created a test aspx page with just the following content:
using CrystalDecisions.Web;
public partial class Test : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
CrystalReportViewer Viewer = new CrystalReportViewer();
Viewer.ID = "viewer";
ph.Controls.Add( Viewer );
When I load the page, I get this exception:
NullReferenceException: Object reference not set to an instance of an object.
CrystalDecisions.Web.ViewerGlobal.get_IsNetscape6Up() +88
CrystalDecisions.Web.CrystalReportViewer.Render(HtmlTextWriter output) +83
This is a server-side exception, so I'm pretty sure that my browser has nothing to do with it, but I've tried this in both Chrome and IE8.
Do I have a screwy install? Or is there something I'm neglecting to do to configure the ReportViewer that's new in 2010?
Thanks for your help,
-SteveI figured it out.
I had already tried adding a new aspx page as David suggested before, and that did not work. So this time I made a whole new "ASP.NET Crystal Reports Web Site" project in my solution, which was nice enough to make a default aspx page with a built in crystal report viewer tied to a new report .rpt file in the project. And believe it or not, it worked flawlessly.
The use of CrystalReportViewer was different but relatively equivalent in both cases. So then I started analyzing the differences between this new project's web.config and mine. After some painstaking troubleshooting, I determined the problem: someone on my team had added some new content to the web.config, which included these lines:
<system.webServer>
<modules>
<remove name="Detector" />
<add name="Detector" type="FiftyOne.Foundation.Mobile.Detection.DetectorModule, FiftyOne.Foundation"/>
</modules>
</system.webServer>
I'm assuming that Crystal also uses a module called "Detector" in get_IsNetscape6Up(), and that this code was overriding that module.
It's still not working quite right, but at least I'm past this error and on to the next one.
I appreciate the help, Don and David!
Thanks,
-Steve -
Object variable not set error in SAP-VB Connect.
This is the coding part i have used for connecting SAP and VB for creating the Sales Order in SAP.
But it gives the error in the line
oheader.Value("DOC_TYPE") = Text1(0)
as Object variable or With block variable not set.
What could be the reason, pls advise me.
Dim bapictrl As Object
Dim boOrder As Object
Dim oPartner As Object
Dim oItemin As Object
Dim oheader As Object
Dim oreturn As Object
Dim oconnection As Object
Private Sub Command1_Click()
Dim x As String
oheader.Value("DOC_TYPE") = Text1(0)
oheader.Value("SALES_ORG") = Text1(1)
oheader.Value("DISTR_CHAN") = Text1(2)
oheader.Value("DIVISION") = Text1(3)
oheader.Value("PRICE_DATE") = Text1(4)
oheader.Value("PURCH_NO") = Text1(5)
oPartner.rows.Add
oPartner.Value(1, "PARTN_ROLE") = Text1(6)
oPartner.Value(1, "PARTN_NUMB") = Text1(7)
oItemin.rows.Add
oItemin.Value(1, "REQ_QTY") = Text1(8)
oItemin.Value(1, "MATERIAL") = Text1(9)
oItemin.Value(1, "COND_VALUE") = Text1(10)
boOrder.createfromdata orderheaderin:=oheader, orderitemsin:=oItemin, orderpartners:=oPartner, return:=oreturn
x = oreturn.Value("message")
If x = "" Then
MsgBox "Transactin Complete"
Else
MsgBox x
End If
End Sub
Private Sub Form_Load()
Text1(4) = Format(Now, "mm/dd/yyyy")
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boOrder = bapictrl.GetSAPObject("SalesOrder")
'Set boOrder = bapictrl.GetSAPObject("BUS2032")
Set oPartner = bapictrl.DimAs(boOrder, "CreateFromData", "orderpartners")
Set oPartner = bapictrl.DimAs(boOrder, "CreateFromData", "orderitemsin")
Set oPartner = bapictrl.DimAs(boOrder, "CreateFromData", "orderheaderin")
End Sub
Thanks in advance
Regards
RajaramHi,
This error occurred in the page where I used the file upload control. The control was working fine before. We tried installing entire PDK again and then applying the hotfix-1, but nothing worked and then I had to use an URL iview to invoke an ASP .Net application just for uploading the files.
Thanks
Swetha -
Object reference not set to an instance of an object error with Import data
Hi Experts,
We are using BPC 7.5M with SQL Server 2008 in Multiserver environment, I am getting an error "Object reference not set to an instance of an object." while running Import data package, earlier we use to get this error sometime(once in a month) but it goes away if we reboot the application server but this time I have rebotted the Application server multiple times but still getting the same error.
Please Advice.
Thanks & Regards,
RohitHi Rohit,
please see the sap note 1615837, maybe this help you.
Best regards
Roberto Vidotti -
"Object reference not set to an instance of an object" error in SAPBO 9.0 PL08
Hi Experts,
I developed Customized Addon and created.ard file using B1 DE 2.2 version. But when we installed in the client place,Addon is connecting and status is showing "Connected" at the same time we are getting an error "Object reference not set to an instance of an object" . Please find the enclosed screen shot for your reference.
In the debug mode, am not getting any error and addon is working perfectly.
I need clarification --->PL08 SDK is required to create .ard file (OR) PL05 SDK is sufficient ??
Before this am getting error "You are not connected to the company" while connecting addon,that is resolved.
Now am facing this problem, Please help me out to resolve this issue.
Thanks & Regards
KMJHi Maik Delly,
I created the addons for SAPB1 8.81/8.82 SQL Server 2008 R2 environment from the same source code which is working fine till now without any error.
But why all of sudden we are getting this error for SAP B1 9.0 PL08 and SQL Server 2012 R2 environment.
In my system i have .net framework 3.5 SP1 and .Net Compact framework 1.0 and 2.0 installed. Addon is connecting and working also without any error for the same environment.
Some Clarification needed
1) SAP B1 9 PL05 SDK sufficient to create .ard file for SAP B1 9 PL08 environment ?
Awaiting for suggestions and advices to resolve this issue.
Thanks & Regards
KMJ -
QAAWS Log in Error - Object reference not set to an instance of an object
I get the following error when trying to log into QAAWS query designer:-
"Object reference not set to an instance of an object"
I'm trying to get this working on a virtual workstation, version 3.1 base install. My host is set up correctly, as the same config works on my desktop machine.
e.g.
http://xxxxxxxdev:8080/dswsbobje/services/Session
I'm using Windows AD in conjunction with SAP authentication. I have installed the SAP GUI and the integration kit.
When I click details, QAAWs credentials dialog, I do not have any language in the drop down, even though I installed English (required). I believe this could be the cause of the error.
It should be noted that all works well with Live Office and I can authenticate and connect to BW, via a Live Office query. Designer also connects to BW successfully.
Other people have experienced this error, but I have seen no resolution.
Any ideas?
Cheers,
Mark.
Edited by: Mr Mark on May 27, 2011 11:29 AMHi David,
Thank you for the reposnse.
Its quite a generic error to be fair.
Due to this:-
*as the same config works on my desktop machine. *
I don't believe that this is the issue.
Also, I'm not trying to connect to a universe at this point, I'm purely trying to log in.
Cheers,
Mark. -
Error in ExecFormMode: Object reference not set...Enprise Job Costing
Partner Add-on: Enprise Job Costing Version 245
SAP 2007A SP01 PL05
Open Job window -> trying to create the first job in a new company -> Add mode -> Get the error message:
Error in ExecFormMode: Object reference not set to an instance of an object
Thanks.This error was resolved in the job costing version 8.00.248. The problem was a field name conflict occurring in SBO 2007A SP01 PL08 and higher and SBO 8.8 PL08 and higher with Enprise Job Costing versions earlier than 8.00.248. The Enprise partner support website has an important note explaining this on the home page - www.enprise.com/partner
Regards,
Lianne Plant
Support Manager -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
"An error has occurred:Object reference not set to an instance of an object."
This error message comes up with a user in InfoView. The user schedules a report, updates parameters, and the report kicks off successfully. But then a few minutes later, this error is received. This occurs sporadically, regardless of the length of time of report or amount of data being retrieved. Sometimes the report runs to completion. Other times this error message occurs.
Has anyone seen this before and have any thoughts?
Thank you.
“An error has occurred:Object reference not set to an instance of an object.”Are you able to replicate the issue both in Java and .NET InfoView?
For .NET InfoView, sometimes the "An error has occurred: Object reference not set to an instance of an object" error shows up after the .NET Framework is upgraded to 2.0 -
"object reference not set to an instance of an object" error while running ssrs report locally
Hi Folks,
I am a bit new to SSRS.
I am using ssrs 2012 and trying to use a method from a dll file. I am loaded the assembly file in reference of the report.
Now I am trying to use a static method from the Dll. e.g. applicationName.classname.MethodName()
But while running the report I am getting "object reference not set to an instance of an object" error.
For a note I am trying execute the report locally.
Any help would be highly appreciable.
sarat chandra sahooSorry for late reply Sinaloe..
I have added a dll file in my report reference. And in a textbox trying to execute this below.
=Recall.Common.LocalizationEx.Localization.GetString(Parameters!Culture.Value, "RFID", "BICustomerPortal")
where Getstring() is a static method in the dll.
I guess some configuration setting I am missing here.
1. I have copied these dlls in "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies" and "C:\Windows\Assembly".
sarat chandra sahoo -
I performed an inplace upgrade on my sharepoint 2007 installation and post the upgrade while trying to browse the document libraries on the site i get the following Error. HAs anyone encountered a similair error?? What could be the cause and resolution
for this
Any pointers/solution appreciated.
Description: An
unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception
Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source
Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack
Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.SharePoint.WebPartPages.ListViewWebPart.PrepareContentTypeFilter(SPList list, Hashtable[] excludedTransformers) +682
Microsoft.SharePoint.WebPartPages.ListViewWebPart.GenerateDocConvScriptBlock(SPWeb web, SPList list) +482
Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.OnPreRender(EventArgs e) +571
Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.OnPreRender(EventArgs e) +78
System.Web.UI.Control.PreRenderRecursiveInternal() +11032094
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393
Version
Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955
My SharePoint Blog
http://dhireny.blogspot.comHow to be in my case??
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.SharePoint.WebPartPages.ListViewWebPart.PrepareContentTypeFilter(SPList list, Hashtable[] excludedTransformers) +694
Microsoft.SharePoint.WebPartPages.ListViewWebPart.GenerateDocConvScriptBlock(SPWeb web, SPList list) +482
Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.OnPreRender(EventArgs e) +571
Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.OnPreRender(EventArgs e) +78
System.Web.UI.Control.PreRenderRecursiveInternal() +11141054
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393 -
Hi,
(1) I am trying to get the data from a database table and import into a text file.
(2) If the record set have the data then it runs ok
(3) when the record set not having any data it is giving the below error
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object
Could you please let me know why this is happening?
Any help would be appriciated
Thanks,
SIVYou might ask them over here.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral%2Ccsharpgeneral%2Cvcgeneral&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
I have a csv file that I need to generate a schema for. I am trying to generate a schema using flat file schema wizard but I keep getting "Object reference not set to an instance of an object." error when I am clicking on the Next button after
specifying properties of the child elements on the wizard. At the end I get schema file generated but it contains an empty root record with no child elements.
I thought may be this is because I didn't have my project checked out from the Visual SourceSafe db first but I tried again with the project checked out and got the same error.
I also tried creating a brand new project and generating a schema for it but got the same error.
I am not sure what is causing Null Reference exception to be thrown and there is nothing in the Windows event log that would tell me more about the problem.
I am using Visual Studio 2008 for my BizTalk development.
I would appreciate if some has any insides on this issue.Hi,
To test your environment, create a new BizTalk project outside of source control.
Create a simple csv file on the file system.
Name,City,State
Bob,New York,NY
Use the Flat file schema Wizard to create the flat file schema from your simple csv instance.
Validate the schema.
Test the schema using your csv instance.
This will help you determine if everything is ok with you environment.
Thanks,
William -
SSAS Tabular - Adding Column to a table gives error "Object reference not set to instance of object"
If I make changes to a table in SSAS Tabular Visual Studio, the newly added column gives error as "Object
reference not set to instance of object"Hi VikasJain13,
According to your description, you get the "Object reference not set to instance of object" error when adding columns in Tabular. Right?
Generally, it throws this error when the internal code is accessing the property of an empty object. As you mentioned it happens when you make changes on a table, mostly it means that table is already a empty object. Please re-process your tabular to see
if this table is still existing.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support -
I cretaed a Visual web part in SP 2013. It needs a SharePoint list. So wrote below code in web part feature receiver. When I deploy the solution I get error says Error occurred in deployment step 'Activate Features': Object reference not set to an instance
of an object. I set ActivateOnDefault="FALSE" and AlwaysForceInstall="TRUE" . Take a look on my feature manifest file.
I cretaed a Visual web part in SP 2013. It needs a SharePoint list. So wrote below code in web part feature receiver. When I deploy the solution I get error says Error occurred in deployment step 'Activate Features': Object reference not set to an instance
of an object. I set ActivateOnDefault="FALSE" and AlwaysForceInstall="TRUE" . Take a look on my feature manifest file.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="SharePointProject1 Feature1" ActivateOnDefault="FALSE" AlwaysForceInstall="TRUE" Id="8f7163d5-6c65-40d8-9045-8f74192f07d7" ReceiverAssembly="SharePointProject1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9c2f0c3a8e22f6a0" ReceiverClass="SharePointProject1.Features.Feature1.Feature1EventReceiver" Scope="Site">
<ElementManifests>
<ElementManifest Location="VisualWebPart1\Elements.xml" />
<ElementFile Location="VisualWebPart1\VisualWebPart1.webpart" />
</ElementManifests>
</Feature>
This is my Feature1EventReceiver code.
SPWeb spWeb = properties.Feature.Parent as SPWeb;
SPList laptopList = spWeb.Lists["Laptops"];
if (laptopList != null)
laptopList.Delete();
SPListCollection lists = spWeb.Lists;
lists.Add("Laptops", "The Laptops", SPListTemplateType.GenericList);
laptopList = spWeb.Lists["Laptops"];
laptopList.Fields.Add("Name", SPFieldType.Text, true);
laptopList.Fields.Add("Model", SPFieldType.Text, true);
laptopList.Fields.Add("Image", SPFieldType.URL, false);
I can deploy if I have only below code
SPWeb spWeb = properties.Feature.Parent as SPWeb;hi
features containing webparts must be site scoped, so you must get spweb as bellow:
SPSite spSite = properties.Feature.Parent as SPSite;
SPWeb spWeb = spSite.RootWeb;
yaşamak bir eylemdir
Maybe you are looking for
-
Cant install 3 or 3.1 "Boot Camp x64 is unsupported on this computer model"
Hello there, i got the latest mac mini in september last year (2009), with bootcamp 3.1 out today etc i finally fired up bootcamp, partitioaned, installed windows 7 etc. Now windows 7 is working, but when it comes to install the latest 3.1 update, th
-
Mocha & Keylight: problems with a greenscreen on the iPad
Hey guys, at the moment I am doing my first greenscreen project with an iPad (and a TV). But I have a few problems with the turbulent footage. In the first picture you can see the tracked path on the iPad with Mocha. Everything moves really fine in t
-
DPM custom filter for planned tape backups crashes mmc.
I am currently seeing this problem on a production Windows Server 2012\DPM 2012 Sp1 (Version 4.1.3465.8) and am wondering whether this could be related to the upcoming time change this weekend. All other filters work fine - pulling back up to 7000 jo
-
Is there any ROUTINE in any SAP prog. to get small classical report?
Hi, I need to develop a report, like classical report. I mean, as below, if u go FB50, eneter good adat , press SIMULATE button, then we can get a classical report showing the details in next screen........so, as i am posting FB50 from Z prog., and t
-
These were previously posted in another forum thread.. I am not particularily great at using these forums- so here it is, again. I have just HAD IT iwth Adobe!!!!! 6.mrskodonnell,Mar 5, 2014 7:32 PM in reply to ssprengel I am having the same issue