OBJECTS_NOT_FLATLIKE error while transfer data to a file .-
Hi experts,
I am getting a dump OBJECTS_NOT_FLATLIKE
while transfer data from internal table to a file .. File contains basically bank transmitting data in SAP
Appreciate your advise and help ...
Thanks
Hi,
1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
* If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
* If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
* Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
* If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
4. Once View Data is successful, you now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
You need to have a agent process running at the system where your source file resides .
Then while running the odi interface choose that agent .
Thanks,
Sutirtha
Similar Messages
-
Error while importing data from XML file to a Oracle database
I am getting the following error while importing data
*** atg.xml.XMLFileException: No XML files were found for "/Dynamusic/config/dynamusic/songs-data.xml".
The files must be located under the name "/Dynamusic/config/dyna
*** java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:120)
at atg.adapter.gsa.xml.TemplateParser.importFiles(TemplateParser.java:6675)
at atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5795)
at atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5241)
I have placed the FakeXADataSource and JTDataSource properties files as required. In fact I have been able to import data in all machines. Just this one machine is giving problems. I have also checked out the access rights. Can someone help me please?Confirm that you have access to D:\MyApp\ATG\ATG10.0.3 and existence of Dynamusic/config/dynamusic/songs-data.xm
-
Error while loading data from a file on application server
Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
PraveenHi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen -
Error while Loading data through .csv file
Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak -
Error while downloading data into excel file.
Hi,
I have a requirement to download data available in xstring to excel file.
I have a RFC which has export parameter 'file_data' of type xstring. When i call RFC
from web dynpro abap application it gives data out pout in xstring format.
I am opening excel file using that xstring data as below
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'file.xls'
i_content = ls_data_source-data_source ***[xstring data from RFC]
i_mime_type = 'x-excel/application'
i_in_new_window = abap_true ).
But excel file not coming in correct format. its giving an error while download
excel file
Error is
" the file you are trying to open , 'file[1].xls', is in a different format than
specified by the file extension. Verify that the file is not corrupted and is from
a trusted source before opening the file. Do you want to open the file now? "
If i click on 'YES' button file opening but not in proper excel format. Data is coming
in tab delimiter format in excel file.
Please suggest any solution for this problem.
Thanks,
Venkat.Hi Thomas,
Following is the logic implemented in RFC which is giving XSTRING as export parameter
STEP1 create a dynamic internal table
Create field catalog for the table using LVC_FIELDCATALOG_MERGE
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = dyn_table.
CREATE EXCEL SHEET BY SENDING FIELD CATALOG AND DATA TAB
STEP2 # Convert text table to xstring.
CALL FUNCTION 'SCMS_TEXT_TO_XSTRING'
IMPORTING
buffer = l_content
TABLES
text_tab = lt_data_tab
EXCEPTIONS
failed = 1
OTHERS = 2.
STEP3 *# Psss Data to Netweaver
PERFORM pass_data_to_nw USING is_import
CHANGING es_attachment_metadata. -
Error while importing data from shape file in mapBuilder.
Hi Dears,
I get the following error while importing shape file from inside mapBuilder
Feb 03, 2015 2:01:52 PM oracle.mapviewer.builder.wizard.shapefile.ImportShapefileThread importFile
WARNING: java.sql.BatchUpdateException: Internal Error: Overflow Exception trying to bind NaN
Record #51 not converted.
Feb 03, 2015 2:01:52 PM oracle.mapviewer.builder.wizard.shapefile.ImportShapefileThread importFile
SEVERE: Exception while importing shapefile [D:\GIS_Data\OpenStreetMap\pakistan-latest\waterways]:
null
any clue, solution. please.
Regards.I would take a look at the attribute data associated with each object in your shape file. Make sure that everything has a value, and that nothing is NULL.
ID VAR1
1 abc
efg <= this record will cause Mapbuilder to error when importing
2 <= this record will cause Mapbuilder to error when importing
3 hij -
Error while loading data through flat files
Hi,
I am laoding data through flat files
I loaded the data in development & then transported it to Quality system for doing Integration testing & loaded the data in Quality system & data loading was successful
But we do the regression testing in one more Quality system where the objects get transported from Quality system ,here when I try to the load the data to any of the cube in this system I am getting the following error
Error 'The argument 'US' cannot be interpreted as a number' on assignment field /BIC/ZIFBCOCTR record 1 value US
Generally we get this error when there is the data of one field is going to the other field
But one thing I am unable to understand is it was working fine in the Quality system and all the objects got transported from Quality to Regression testing system
Could any one help me out
Thanks
MayaHi,
Can you please cross check the file structure and the transfer structure.
Cheers,
Malli.... -
Error while transfer data from SNP
Dears,
Am facing the below error while trying to transfer the data from DP .(SAPAPO/MC90
Thanks for the helpHi Vijesh
You may start looking into the issue by checking whether all Product/Location mentioned in the seletion exists as CVC in MPOS. This should be followed by running a consistency checks through /SAPAPO/TS_LCM_CONS_CHECK. This previous post may be helpful - https://scn.sap.com/thread/654202.
Thanks,
Prasun -
ODI error while loading data from Flat File to oracle
Hi Gurus,
I am getting following error while loading flat file to oracle table :
ava.lang.NumberFormatException: 554020
at java.math.BigInteger.parseInt(Unknown Source)
at java.math.BigInteger.<init>(Unknown Source)
at java.math.BigDecimal.<init>(Unknown Source)
at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
The connections between source and target is fine.
Kindly suggest on this error.
Thanks
ShridharHi John,
The source is csv file. By default all columns are string type.The integration is failing at step 3 ( load Data).
I am loading the data from csv file directly to staging table( oracle ).Its one to one mapping.
Shridhar -
Unable to find file error while loading data from text file to Oracle
Hi,
I am having a interface where i am loading a data of Text file to Oracle.
But when i am trying to do this i am getting following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection SAPMM.
Caused By: java.sql.SQLException: File not found: d:/mdb/#General.get_filename
at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
SAPMM is connection name.
I am using get_filename to get the filename and it is fetching correct value as the this variable refreshes in previous step of this interface.
KM used for loading is File to SQL
What would be cause of this error?
Thanks,
MaheshHi,
Did a testing and following are the result
I have
A> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
Package executes successfully.
B> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Scenario of Interface which gets the file name from v_filename and load into target table
Package executes with erre as it is not able to find the file
C> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
4. Now create a scenario of the package , use the generated scenario in another package say main_package
Execution of main_package is successful.
Thanks,
Sutirtha -
Error while uploading data through CSV File
Dear All,
While Performing following steps I have encounted error in BW 3.5.
Step 1. Right-click Source System u2013 demo: flat file, and then select Create InfoPackageu2026.
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and
Step 3. Click the External data tab. Select options as shown in the screen. Enter a file name with a path.(CSV File)\
While checking the preview I am able to see the values inside CSV file,
But while Starting the scheduler to upload this data it is displaying following error=>
Syntax error in template RSTMPLIR, row 0 (-> Long text)
While checking performance assistant following detail is displayed.
*Diagnosis
Field "C_R_D" is unknown. It is neither in one of the specified tables nor defined by a "DATA" ...
System response
The program generation was terminated.
Procedure
Correct the template*
Can you guide how to eliminate this error?
Points will be rewarded for your contribution
Regards,
PuravFlat File was in error.
-
Error while loading data from Flat file???
Hi
If in flat file say i have country code as 0190.i have extracted the data to data targets but in the data targets the country code is displayed as 190.how can i rectify this error.I have used Alpha conversion but still i have this problem??
Points Assured
Thanksits a general practice that the system eliminates the prefix Zeros..
Use the option:
format and define the cell as text
thanks
Edited by: vishnuC on Jun 2, 2008 8:06 AM -
Error while loading data from flat file to Oracle DB
I am new to ODI. I am trying to load data from a flat file to Oracle DB using the LKM File to Oracle (External Table) and using the IKM Oracle Incremental Update. I am getting the following exception during the "Create External Table" stage:
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:561)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx1.f$0(<string>:50)
at org.python.pycode._pyx1.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
... 1 more
Caused by: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Could anyone please provide any pointers.
Thanks,
Srini.The code that is executed is as follows:
createTblCmd = r"""
create table ODITEMP.C$_0PARTNER
C1_C1 NUMBER(14),
C2_C2 VARCHAR2(12),
C3_C3 VARCHAR2(18),
C4_C4 NUMBER(7),
C5_C5 TIMESTAMP(11)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY dat_dir
ACCESS PARAMETERS
RECORDS DELIMITED BY 0x'0D0A'
CHARACTERSET 'WE8ISO8859P1'
STRING SIZES ARE IN CHARACTERS
BADFILE 'partners.txt_%a.bad'
LOGFILE 'partners.txt_%a.log'
DISCARDFILE 'partners.txt_%a.dsc'
SKIP 0
FIELDS
MISSING FIELD VALUES ARE NULL
C1_C1 POSITION(1:14) ,
C2_C2 POSITION(15:26) ,
C3_C3 POSITION(27:44) ,
C4_C4 POSITION(45:51) ,
C5_C5 POSITION(52:62)
LOCATION ('partners.txt')
PARALLEL
REJECT LIMIT UNLIMITED
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit() -
Error While Posting Data Of Multiple File to R/3
Hello,
I am currently testing with a scenario <b>where a number of XML files are read by XI and their data is passed to R/3 via an RFC call. Each XML File contains one line item data.</b> I am using BPM to achieve this. The problem is: <b>If I test with a single line item data (single file), the scenario works fine and data is updated at the R/3 end. But if I try to put multiple files simultaneously, only one file's data is going into R/3</b>. What can be the problem? Is it something to do with serialization? I have tried using EOIO; but still the same problem persists. I see in SXMB_MONI that all the messages have chequered flag. I have tried debugging the RFC, but it does not work out for multiple calls. Anybody has any idea how this can be solved?
Regards,
AmitabhaHello Bhavesh,
Thanks for your reply. My BPM scenario is as follows:
<b>Receive->Synchronous Send->Asynchronous Send</b>
In sender channel for XML files, I have used <b>Filename*</b> as the source file name as my files are coming with <b><filename ><timestamp></b> naming convention. Poll interval is <b>5 seconds</b>, Processing mode is <b>by name</b>.
AT the RFC receiver channel end, the credentials are all ok and the <b>number of maximum connections is set to 25</b>. I have always tested with no. of messages<5.
Hope you find this info useful. Awaiting reply.
Thanks and Warm Regards,
Amitabha -
Error While Uploding data from Excel File
I try to upload data directly from Xlfile to Internal table.I have used the foll function module
ALSM_EXCEL_TO_INTERNAL_TABLE
and it's working nicely when i run the program from R/3.
My Question is ,if i access the same program from ITS ,no record is uploaded .
Any help will be much appreciated .
Rgds,
J.Hi,
try with this sample code.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
exporting
field_name = 'p_file'
importing
file_name = p_file.
start-of-selection.
clear itab.
call function 'WS_UPLOAD'
exporting
codepage = ' '
filename = p_file
filetype = 'DAT'
tables
data_tab = itab
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10.
if sy-subrc ne 0.
message e000 with text-e01.
stop.
endif.
I hope it will work for you.
Thanks.
Maybe you are looking for
-
Calling web service using ksoap2
Hello Friends, I am writing a Java client which uses ksoap2. I am new to web services and ksoap2. The WSDL is like this <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://micro
-
Hi, I have a MacBook which is running 10.5.6 I think that means I have Leopard. But I am not sure. We recently got the MacBook working again and when we reinstalled Mac OS with the only disk we had which was a 10.4.6 Tiger Disk it updated it to 10.5.
-
Message stating my POP server has rejected my password
Of late - something like the last three weeks - I have been getting a Mail error intermittently. There is no pattern that I can establish. The error occurs when Mail attempts to check for new emails. I keep two accounts, and the error does not necess
-
Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence?
Hi Team, I am in the phase of upgrading Exchange 2010 to 2013, and introduced 4 MBX and 2 CAS of 2013 servers in co-existence. Only one production mailbox of 2010 moved to 2013. The owa of the mailbox moved to 2013, is working OK internally coz only
-
If I go offline and later decide to go back online the error message says the firefox is still running even though all windows are closed.