OC4J and Eclipse

Is there somebody developing OC4J application with Eclipse IDE ?
Xavier

Hello Xavier
We are trying to. Does anybody out there know how to configure OC4J under eclipse to run in the debugger?
We tried to create a new debug configuration, added all OC4J jars to its classpath and it almost worked. Well, OC4J started with an error message about JSPTagLibs (fortunately we aren't using any). The problem is that our application, when being run inside Eclipse, can't get Resource Bundles (getResourceBundleAsStream()).
Thanks for any hints,
Luis F Soeiro

Similar Messages

OC4J and FOP installation

Hi,
We would like to use the PDF printing of 3.0.1
I am trying to install FOP but I do not have any knowledge in OC4J and Java ... so I am kind a lost right now.
I am following the installation guide of OC4J standalone (http://download.oracle.com/docs/cd/B32110_01/web.1013/b28950/install.htm#BABIBGCA)
I was wondering :
1- do I need to install oc4j standalone in a separate Oracle Home ?
2- There is already an OC4J installed in my db Oracle Home , I guess for emdbconsole. So , I created a new directory called oc4j_sa and unzipped the file. When I start OC4J with oc4j -start , it does not give me the prompt back. Then , I can access the web page with port 8888 (192.168.0.21:8888) , but 192.168.0.21:8888/em fails . So I cannot deploy the FOP war file.
Any pointers or guidance would be great.
Thanks
Francis.
P.S. :
Oracle 10.1.0.5
Oracle Linux (RH 4)

OK, I finally got to the deployment of FOP but now it generates a corrupted PDF.
Are there any log files that I can check ?
I created a new Oracle_home for OC4J and ran "EM" to deploy FOP and everything worked like in the viewlet.
Now I did the setup in APEX and set the following :
Standard Support
Print Server Protocol HTTP
Print Server Host Address 192.168.0.21
Print Server Port 8888
Print Server Script /fop/apex_fop.jsp
I created a sample application to test. In a report , I added the print link.
When I clic Print, the pdf generated is corrupted and does not work.
Thanks
Francis.

OC4J and Oracle forms causes ie or firefox to not respond when running form

When I run a form in Oracle Forms 10g, I have OC4J running, and have the following displayed:
E:\Windows\system32>E:\DevSuiteHome_5\jdk\bin\java -Doracle.security.jazn.confi
g=E:\DevSuiteHome_5\j2ee\DevSuite\config\jazn.xml -Doracle.home=E:\DevSuiteHome_
5 -DORACLE_HOME=E:\DevSuiteHome_5 -jar E:\DevSuiteHome_5\j2ee\home\oc4j.jar -use
rThreads -config E:\DevSuiteHome_5\j2ee\DevSuite\config\server.xml
07/11/20 23:11:44 Warning: Error reading transaction-log file (/E:/DevSuiteHome_
5/j2ee/DevSuite/persistence/transaction.state) for recovery: premature end of fi
le
07/11/20 23:11:44 Forced or abrupt (crash etc) server shutdown detected, startin
g recovery process...
07/11/20 23:11:44 Recovery completed, 0 connections committed and 0 rolled back.
07/11/20 23:11:44 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)
initialized
07/11/20 23:18:10 FormsServlet init():
configFileName: E:\DevSuiteHome_5/forms/server/formsweb.cfg
testMode: false
I am running vista, and have the latest version of the dev suite. Does anybody know how I can fix this problem?

You cannot use Internet Explorer on Windows Vista to run Web Forms.
<p>But you CAN run web forms through Netscape or Firefox. But you first need to disable Java in the browser.
<p>And to run OC4J on Vista, you need to set its compatibility mode to Windows XP.
<p>See my notes on OC4J and "Browser Settings" in this thread:<br>
Forms 10g installed and running on Windows Vista

Report display is different in report builder, local oc4j and app server

Hi guys,
we upgrade reports from sql report writer into report 10g. In the report 10g builder,
the report format looks fine. but if i use the url as below
http://applicationserver/reports/rwservlet?report=test.rdf&userid=username/password@service&desformat=pdf&destype=cache
so the format will be mess up whatever i use this url in my local oc4j or i deployed it into 10g application server. and the format is different in oc4j and application server. Why this issue happend?
Thanks in advance,
Appcat

Hello,
They are a Fix Pack higher than you which may explain why it's broken on their server.
Download the Fix Pack for R2 and see if you can duplicate the issue.
Thank you
Don

Building J2EE Applications using JBOSS and ECLIPSE 3.0

Hi all
i am trying to deploy a J2EE application using JBOSS3.2.5 and Eclipse 3.0.
I have written the EJB bean, home, remote and a test JSP page. Can someone tell me the exact procedure...step by step ways to deploy the JBOSS server and run my application.
My package structure is
MyProject
ejb
client
Servlet.java
server
Bean.java
shared
home.java
remote.java
please tell the various jar files that i must include. Kindly give information about the directory structure, the xml file details and the WAR file generation
Thankz in advance
Arun :)

That is a lot of stuff! At a basic level, you can create an EAR file and put it in the JBoss auto-deployment directory. In the EAR file you should have a WAR file for the web component and a JAR file for the EJB component. And inside each archive there should be a valid deployment descriptor that contains configuration data for the component. When you start up JBoss, the application will be deployed and accessible via web browser, or there will be error messages written to the server log.

Using NetBeans and Eclipse to drag and drop forms, controls etc

Hi, can you use NetBeans and Eclipse to drag and drop like say with C# in MS Visual Studio ?
like forms and listboxes, textboxes etc ??

And [this is a good place to start|http://java.sun.com/docs/books/tutorial/uiswing/index.html]
db

RoboHelp and Eclipse

Hi,
We have been generating XML Help and then with a script changing tag names so that we can incorporate the Help into Eclipse.
However, in RoboHelp 9, RoboHelp adds BOM characters to the html files and Eclipse doesn't seem to handle these characters correctly (even though they are legal).
Is there a way to prevent RH from adding these characters?
I also saw that RH9 supports Eclipse Help - it has the same BOM characters so we couldn't really try it out. Is there any details somewhere on how to integrate the Eclipse Help that RH generates with Eclipse? Wehn we just add the files it doesn't seem to work. Are there instructions anywhere?
Thanks,
Rakefet

Contact me via my site.

How to make OC4J and IIS on diffrent machines ?

Hi,
How to make OC4J and IIS running diffrent machines. following document tells use "standalone ONS daemon",Can anybody tell what standalone ONS daemon means and steps to be done to make IIS working on diffrent machine
http://download-west.oracle.com/docs/cd/B25221_03/web.1013/b25211/oc4jplugin.htm#i638738
Thanks & Regards
Vino joy

sender,
the quantize menu is in the top info box in the arrange.
if you double click on it, an extended parameter box appears with a lot of quantizing options. also RTFM about this bit.
in the sample editor, there is an audio quantize feature.
but it is old, and probably hasn't been updated in ten years........try it, you
'll prolly hate it.
there is also a quantize audio/groove plug, in the special menu.
it works....sorta.
if you're talkin' drums, on seperate tracks, like kik on one, and snr on the next, etc., try strip silence to cut the loop/file up, then select same in the arrange trk and quantize this, as above. (info box).
this does work well provided you know just where you want the feel to be.
you could also try making a groove template of the original clip/loop and use this as a timing reference.
this also works well if you can get a clean footprint of the audio.
best,
DR9

Configuring blazeds, spring, flex and eclipse ide

Hi,
Can you please suggest me in configuring blazeds, spring, flex and eclipse ide. I have tried hard googling, but couldnt get solution for configuring all the four.
thanks in advance

Hi jvk180:
Firstly, you should either need to define the destination in remoting-config.xml or in app-context.xml, but and in both places.
Secondly, the error indicates that it is missing the channel information.
Option 1:
Assuming your bean "helloServiceDestination" uses other Spring beans, then:
1. The right place to declare the destinations is in app-context.xml.
2. In that case, you need to also define the channels that the destination will be exposed over. See documentation for how to do that.
3. In your remote object declaration, you need to pass the channel set that gets used as well.
<mx:ChannelSet id="cs">
<mx:AMFChannel url="http://<yourServerName>:<yourServerPort>:/<yourContextRoot>/messagebroker/amf"/>
</mx:ChannelSet>
<mx:RemoteObject id="ro" destination="helloServiceDestination" channelset="{cs}" result="resultHandler(event)" fault="faultHandler(event)"/>
Option 2:
If you declare your destination, in remoting-config.xml, then you need to compile your swf with services-config.xml. Refer to documentation for how to do that.
Hope that helps.
Rohit

Similar to the question in cvs and eclipse thread

My Question is similar to the question in the cvs and eclipse thread, how can you know on the *.<file_extension>, v the date it was created? thank you very much to those who will reply

Hey wspearman,
Thanks for the question. Genius is still a great feature of iTunes 11, it may be that you simply need to turn it on. To do so, click Store > Turn On Genius
iTunes 11 for Windows: Use Genius Shuffle, Genius playlists, or Genius Mixes
http://support.apple.com/kb/PH12342
Note: Use Control-B on a Windows computer to show/hide the menubar
Thanks,
Matt M.

How Standalone OC4J and the Oracle Application Server linked to each other

Hi ,
Please let me know what is the relation between a Standalone OC4J and the Oracle Application Server ?
In my application The Oracle Application Server is installed in C drive and there is a Stand alone oC4j .
Please tell me how they are linked to each other .
Thank you .

It depends on your need and what features and functionality of Oracle Application Server you are interested in. Note that OC4J is a component of Oracle Application Server that can run as a standalone component or within Oracle Application Server. Question #6 in earlier mentioned FAQ document states:
OC4J standalone is J2EE 1.3 compatible (1.4 and 1.5 too in later releases of OC4J) and is able to be used in both development and small scale production environments. OC4J standalone provides its own inbuilt HTTP/S listener to allow clients to execute Web applications that it has deployed. Application deployment and server configuration of OC4J standalone is performed by the manual editing of a simple set of XML files.
For large scale enterprise deployments, the Oracle Application Server product is likely to be more suitable with its comprehensive feature set including Oracle HTTP Server, process monitoring and management capabilities, and its configuration and management console.
So if you are happy with what you see in standalone OC4J and scalability isn't an issue for you, you can stay with standalone OC4J and don't need to move to Oracle Application Server.
PS: If you do decide to use OC4J that's embedded with Oracle Application Server, you can't move your standalone OC4J inside Oracle Application Server. You will have to reconfigure embedded OC4J again (as you might have done with standalone OC4J) and redeploy your applications.
Hope this helps.
Thanks
Shail

Is the Lastest OC4J and AS9i work with oracle 8i ?

Hi, a quick question:
Is the lastest OC4J and Oracle AS9i works/compatible with Oracle 8i?

Yes, you can use OC4J and Oracle9iAS with Oracle8i also.
-Arun

Oracle JVM 6u21 and Eclipse

If you have been experiencing Eclipse crashes since updating to Sun/Oracle JVM 6u21 (aka 1.6.0_21), head over to the following blog post to read about a workaround...
http://lt-rider.blogspot.com/2010/07/oracle-jvm-6u21-and-eclipse.html
- Konstantin

Oracle has produced another build of 6u21 JVM that reverts the change that adversely affected Eclipse. If you have reverted back to an older JVM, you can safely move forward to 6u21. The build 1.6.0_21-b07 is safe to use. The version that Eclipse has trouble with is b06. You can check which version you have by running "java -version".
- Konstantin

Java JDK 7 u17 won't install and Eclipse won't run past boot logo.

Java JDK 7 u17 won't install and Eclipse won't run past boot logo. Eclipse Classic used to work fine for awhile. I haven't used it for a month or two and tried to boot it, Eclipse won't run past boot logo. It looks like JDK is not even there anymore. JDK won't install successfully. I have Mac OS X 10.8.3.
I tried removing Java, re-download JDK multiple times.. same results.
MyComputer-MacBook-Air:~ MyComputer$ java -version
java version "1.7.0_17"
Java(TM) SE Runtime Environment (build 1.7.0_17-b02)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)

Paul Adare is correct in saying that you cannot "upgrade" from 32-bit to 64-bit. You can, however, backup your files and reload them onto your PC.
Given that you are able to boot Windows 7 after the failure to install Windows 10 Technical Preview, it is apparent that you are not formatting the drive during your clean installation. There are a number of potential issues an existing configuration can
cause, such as preventing Windows Setup from registering boot files, modifying partitions, or moving an existing installation and data to the windows.old folder. I would recommend removing the partitions from your drive (note: this will erase any data remaining
on the hard disk) during installation to ensure that Windows Setup has a fresh hard drive to install to. If you continue to experience errors, two other factors to take into consideration are:
Does your system use a storage controller that requires loading a driver during Windows Setup?
Is the hardware malfunctioning? Do the hard disk and memory pass testing software like Windows Memory Diagnostic or chkdsk?
Reference
this article for more information.
Hessam
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Kodo 3.1.12 and Eclipse

Hi,
I have added Kodo plugin to Eclipse (version 3) . I have added Kodo
enhancer to Build sequence for the project. However when I run build I get
an error and eclipse log file has following exception:
ava.lang.NoClassDefFoundError: org/apache/log4j/Category
     at
com.solarmetric.log.Log4JLogFactory.newLogAdapter(Log4JLogFactory.java:19)
     at com.solarmetric.log.LogFactoryAdapter.getLog(LogFactoryAdapter.java:25)
     at
com.solarmetric.conf.ConfigurationImpl.getLog(ConfigurationImpl.java:115)
     at kodo.enhance.JDOEnhancer.run(JDOEnhancer.java:2168)
     at
kodo.jdbc.integration.eclipse.EnhancerBuilder.build(EnhancerBuilder.java:40)
     at
org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:564)
     at
org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:615)
     at org.eclipse.core.runtime.Platform.run(Platform.java:747)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:157)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:202)
     at
org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:229)
     at
org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:615)
     at org.eclipse.core.runtime.Platform.run(Platform.java:747)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:232)
     at
org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:268)
     at
org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:297)
     at org.eclipse.core.internal.resources.Workspace.build(Workspace.java:198)
     at
org.eclipse.ui.actions.GlobalBuildAction$1.run(GlobalBuildAction.java:182)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:66)
I have copied the log4j jar to kodo plugin directory and added libarary
tag to plugin.xml as following:
     <library name="log4j-1.2.8.jar"/>
What am I doing wrong?

Mark,
Here is my plugin.xml. classes12.jar is in the same directory as the
plugin.xml
<?xml version="1.0" encoding="UTF-8"?>
<plugin id="kodo"
     name="%name"
     version="1.0.1"
     provider-name="%provider-name"
     class="kodo.jdbc.integration.eclipse.KodoPlugin">
     <runtime>
     
          <library name="classes12.jar"/>





          <library name="kodo-jdo.jar"/>
          <library name="jakarta-commons-collections-2.1.jar"/>
          <library name="jakarta-commons-lang-1.0.1.jar"/>
          <library name="jakarta-commons-pool-1.0.1.jar"/>
          <library name="jakarta-regexp-1.1.jar"/>
          <library name="jca1.0.jar"/>
          <library name="jdbc2_0-stdext.jar"/>
          <library name="jdo-1.0.1.jar"/>
          <library name="jta-spec1_0_1.jar"/>
          <library name="xalan.jar"/>
          <library name="xercesImpl.jar"/>
          <library name="xml-apis.jar"/>
          <library name="jfreechart-0.9.16.jar"/>
          <library name="jcommon-0.9.1.jar"/>
          <library name="mx4j-admb.jar"/>
          <library name="mx4j-jmx.jar"/>
          <library name="mx4j-tools.jar"/>
          <library name="jline.jar"/>
          <library name="sqlline.jar"/>
     </runtime>
     <requires>
          <import plugin="org.eclipse.ui"/>
          <import plugin="org.eclipse.core.resources"/>
          <import plugin="org.eclipse.jdt.core"/>
          <import plugin="org.eclipse.jdt.launching"/>
     </requires>
     <extension point="org.eclipse.ui.actionSets">
          <actionSet id="kodo.jdbc.integration.eclipse.actionSet"
               label="%action-set-name"
               visible="true">
               <menu id="kodo.menu"
                    label="%group-label">
                    <separator name="baseGroup"/>
               </menu>
               <action id="kodo.removeBuilder"
                    label="%remove-builder-label"
          class="kodo.jdbc.integration.eclipse.RemoveBuilderAction"
                    tooltip="%remove-builder-tooltip"
                    menubarPath="kodo.menu/baseGroup"
                    enablesFor="1">
               </action>
               <action id="kodo.addbuilder"
                    label="%add-builder-label"
               class="kodo.jdbc.integration.eclipse.AddBuilderAction"
                    tooltip="%add-builder-tooltip"
                    menubarPath="kodo.menu/baseGroup"
                    enablesFor="1">
               </action>
               <action id="kodo.mapping.build"
                    label="%mapping-build-label"
                    tooltip="%mapping-build-tooltip"
               class="kodo.jdbc.integration.eclipse.MappingToolAction$BuildSchema"
                    icon="icons/BuildSchemaMappingTool.gif"
                    menubarPath="kodo.menu/baseGroup"
                    toolbarPath="Normal/Kodo"
                    enablesFor="+">
                    <selection class="org.eclipse.core.resources.IFile"
                         name="*.jdo">
                    </selection>
               </action>
               <action id="kodo.mapping.drop"
                    label="%mapping-drop-label"
                    tooltip="%mapping-drop-tooltip"
                    class="kodo.jdbc.integration.eclipse.MappingToolAction$Drop"
                    icon="icons/DropMappingTool.gif"
                    menubarPath="kodo.menu/baseGroup"
                    toolbarPath="Normal/Kodo"
                    enablesFor="+">
                    <selection class="org.eclipse.core.resources.IFile"
                         name="*.jdo">
                    </selection>
               </action>
               <action id="kodo.mapping.refresh"
                    label="%mapping-refresh-label"
                    tooltip="%mapping-refresh-tooltip"
          class="kodo.jdbc.integration.eclipse.MappingToolAction$Refresh"
                    icon="icons/RefreshMappingTool.gif"
                    menubarPath="kodo.menu/baseGroup"
                    toolbarPath="Normal/Kodo"
                    enablesFor="+">
                    <selection class="org.eclipse.core.resources.IFile"
                         name="*.jdo">
                    </selection>
               </action>
               <action id="kodo.enhance"
                    label="%enhance-label"
                    icon="icons/EnhancerAction.gif"
               class="kodo.jdbc.integration.eclipse.EnhancerAction"
                    tooltip="%enhance-tooltip"
                    menubarPath="kodo.menu/baseGroup"
                    toolbarPath="Normal/Kodo"
                    enablesFor="+">
                    <selection class="org.eclipse.core.resources.IFile"
                         name="*.jdo">
                    </selection>
               </action>
          </actionSet>
     </extension>
     
     <extension point="org.eclipse.ui.perspectiveExtensions">
          <perspectiveExtension targetID="org.eclipse.ui.resourcePerspective">
               <actionSet
                    id="kodo.jdbc.integration.eclipse.actionSet">
               </actionSet>
          </perspectiveExtension>
     </extension>
     
     <extension point="org.eclipse.ui.preferencePages">
          <page name="%preference-name"
               class="kodo.jdbc.integration.eclipse.KodoPreferencePage"
               id="kodo.jdbc.integration.eclipse.preferences.KodoPreferencePage">
          </page>
     </extension>
     
     <extension point="org.eclipse.ui.editors">
          <editor name="%mappingeditor-name" extensions="mapping"
               icon="icons/mapping.gif"
               contributorClass="org.eclipse.ui.texteditor.BasicTextEditorActionContributor"
               class="kodo.jdbc.integration.eclipse.editor.XMLEditor"
               id="kodo.jdbc.integration.eclipse.editor.XMLEditorMapping">
          </editor>
          <editor name="%editor-name" extensions="jdo,schema"
               icon="icons/metadata.gif"
               contributorClass="org.eclipse.ui.texteditor.BasicTextEditorActionContributor"
               class="kodo.jdbc.integration.eclipse.editor.XMLEditor"
               id="kodo.jdbc.integration.eclipse.editor.XMLEditor">
          </editor>
     </extension>
     
     <extension point="org.eclipse.ui.views">
          <view id="kodo.jdbc.integration.eclipse.KodoView"
               name="%view-name"
               category="org.eclipse.jdt.ui.java"
               icon="icons/kodosmall.gif"
               class="kodo.jdbc.integration.eclipse.KodoView">
          </view>
     </extension>
     
     <extension point="org.eclipse.core.resources.builders"
          id="kodo.jdbc.integration.eclipse.EnhancerBuilder"
          name="%builder-name">
          <builder>
               <run
               class="kodo.jdbc.integration.eclipse.EnhancerBuilder">
               </run>
          </builder>
     </extension>
     
     <extension point="org.eclipse.ui.perspectiveExtensions">
          <perspectiveExtension
               targetID="org.eclipse.debug.ui.DebugPerspective">
               <view id="kodo.jdbc.integration.eclipse.KodoView"
                    relative="org.eclipse.debug.ui.ExpressionView"
                    relationship="stack"/>
               <viewShortcut id="org.eclipse.jdt.debug.ui.DisplayView"/>
          </perspectiveExtension>
     </extension>
</plugin>
Marc Prud'hommeaux wrote:
Genna-
Can you post your plugin.xml file? The majority of the time, this
problem is because of an error in the configuration file.
In article <[email protected]>, Genna Reingold wrote:
Ok,
I have found where log4j was coming from - I have selected my runtime
Kodo property file in Kodo preferences. Removing reference to property
file fixed the problem. However I have another issue now. When I run
refresh mapping I get following error:
<error>-An error occurred running MappingTool
     kodo.util.FatalDataStoreException: oracle.jdbc.OracleDriver
NestedThrowables:
java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
I have upgraded to Kodo 3.1.15, I'm using latest Eclipse 3.0. I have
copied classes12.jar to plugin directory and modified plugin.xml as
prescribed in the manual.
Stephen Kim wrote:
Genna,
Also note that the Eclipse plugin uses its own logging mechanism.
Setting a kodo.Log property for the plugin's property file will not
change the way in which the plugin logs messages (you may want to have
an Eclipse specific property file with the Log property removed).
Marc Prud'hommeaux wrote:
Genna-
It sounds like Eclipse might have an older version of the log4j jar
file. Can you check to see if there are any other "log4j" jars in
Eclipse's environment?
Also, what version of Kodo are you using? Can you try with the latest
release (3.1.5)?
Finally, can you ensure that you are using the final 3.0 release of
Eclipse, and not one of the betas? There are some known problems with
some of the 3.0 betas.
In article <[email protected]>, Genna Reingold wrote:
Hi,
I have added Kodo plugin to Eclipse (version 3) . I have added Kodo
enhancer to Build sequence for the project. However when I run build I
get
an error and eclipse log file has following exception:
ava.lang.NoClassDefFoundError: org/apache/log4j/Category
     atcom.solarmetric.log.Log4JLogFactory.newLogAdapter(Log4JLogFactory.java:19)
     at
com.solarmetric.log.LogFactoryAdapter.getLog(LogFactoryAdapter.java:25)
     atcom.solarmetric.conf.ConfigurationImpl.getLog(ConfigurationImpl.java:115)
     at kodo.enhance.JDOEnhancer.run(JDOEnhancer.java:2168)
     at
kodo.jdbc.integration.eclipse.EnhancerBuilder.build(EnhancerBuilder.java:40)
     at
org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:564)
     at
org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:615)
     at org.eclipse.core.runtime.Platform.run(Platform.java:747)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:157)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:202)
     at
org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:229)
     at
org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:615)
     at org.eclipse.core.runtime.Platform.run(Platform.java:747)
     at
org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:232)
     at
org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:268)
     at
org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:297)
     at
org.eclipse.core.internal.resources.Workspace.build(Workspace.java:198)
     atorg.eclipse.ui.actions.GlobalBuildAction$1.run(GlobalBuildAction.java:182)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:66)
I have copied the log4j jar to kodo plugin directory and added libarary
tag to plugin.xml as following:
     <library name="log4j-1.2.8.jar"/>
What am I doing wrong?
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com
Marc Prud'hommeaux
SolarMetric Inc.

OC4J and Eclipse

Similar Messages

Maybe you are looking for