OC4J bind socket address issue

Hi i am using DB(9.2.0.6.0) and APPS(11.5.10.2).  Now i have cloned a new instance and it runs on port 8050. Now i want to install and configure OC4J with it. I have done the OC4J Installation Successfully. Here i used the OC4J Version 9.0.3.I have changed the http-web-site.xml port number to 8890 and rmi.xml port to 23793 as per the document i got.To create the starting script, file name called “.start_oc4j” I issued cd $OC4J_TOP/j2ee/home/ then
java -jar oc4j.jar and
it throws the error
[applpdev@oraapps ~]$ cd $OC4J_TOP
[applpdev@oraapps home]$ pwd
/pdev/p01/oracle/pixappl/pwr/11.5.0/oc4j/
[applpdev@oraapps oc4j]$ cd j2ee/home/
[applpdev@oraapps home]$ java -jar oc4j.jar
Error starting JMS-Server: Unable to bind socket: Address already in use
Error starting ORMI-Server.  Unable to bind socket: Address already in use
[applpdev@oraapps home]$

Hi Hussein,
     Now i am facing a new issue. I am using oc4j 9.0.3 version. When i started the oc4j i am getting the following error.
[applpdev@oraapps home]$ java -jar oc4j.jar
Auto-deploying ejb (No previous deployment found)... Exception in thread "Orion Launcher" java.lang.NoClassDefFoundError: sun/jdbc/rowset/CachedRowSet
        at java.lang.Class.getDeclaredMethods0(Native Method)
        at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
        at java.lang.Class.privateGetPublicMethods(Class.java:2547)
        at java.lang.Class.getMethods(Class.java:1410)
        at
com.evermind.server.ejb.compilation.ClassCompilation.compileMethods(ClassCompilation.java:84)
        at com.evermind.server.ejb.compilation.StatelessSessionBeanCompilation.compile(StatelessSessionBeanCompilation.java:40)
        at com.evermind.server.ejb.compilation.Compilation.compile(Compilation.java:288)
        at com.evermind.server.ejb.EJBContainer.postInit(EJBContainer.java:551)
        at com.evermind.server.Application.postInit(Application.java:431)
        at com.evermind.server.Application.setConfig(Application.java:136)
        at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1635)
        at com.evermind.server.ApplicationServer.initializeApplications(ApplicationServer.java:1585)
        at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1240)
        at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:93)
        at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.ClassNotFoundException: sun.jdbc.rowset.CachedRowSet
        at com.evermind.naming.ContextClassLoader.findClass(ContextClassLoader.java:456)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at com.evermind.naming.ContextClassLoader.loadClass(ContextClassLoader.java:135)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
        ... 15 more
So i uninstalled jdk1.6.0 and installed jdk1.4.2 and i started the OC4J. The default web page is displayed. Now i moved a .ear file to the directory APPL_TOP/pwr/11.5.0/oc4j/j2ee/home/applications added the entries in the server.xml,application.xml,http-web-site.xml and the directory is created for the respective .ear file. Under the path APPL_TOP/pwr/11.5.0/oc4j/j2ee/home/applications there are two default directories called dms0 and dms and they are accessible through the browser but my directory created by the .ear file is not accessible through the browser and it throws the error Can't find the directory. I checked the log and the content is
12/5/13 6:06 PM iLogin: JspServlet: unable to dispatch to requested page: Exception:oracle.jsp.provider.JspCompileException: <H3>Errors compiling:/pdev/p01/oracle/pixappl/pwr/11.5.0/oc4j/j2ee/home/application-deployments/iLogin/iLogin/persistence/_pages//_iLogin.java</H3><pre>error: Invalid class file format in /usr/java/j2sdk1.4.2_19/jre/lib/rt.jar(java/io/PrintWriter.class).  The major.minor version '48.0' is too recent for this tool to understand.
/pdev/p01/oracle/pixappl/pwr/11.5.0/oc4j/j2ee/home/application-deployments/iLogin/iLogin/persistence/_pages/_iLogin.java:11: Class java.io.PrintWriter not found in import.
import java.io.PrintWriter;
       ^
error: Invalid class file format in /usr/java/j2sdk1.4.2_19/jre/lib/rt.jar(java/io/IOException.class).  The major.minor version '48.0' is too recent for this tool to understand.
/pdev/p01/oracle/pixappl/pwr/11.5.0/oc4j/j2ee/home/application-deployments/iLogin/iLogin/persistence/_pages/_iLogin.java:12: Class java.io.IOException not found in import.
import java.io.IOException;
       ^
error: Invalid class file format in /usr/java/j2sdk1.4.2_19/jre/lib/rt.jar(java/sql/Connection.class).  The major.minor version '48.0' is too recent for this tool to understand.
/pdev/p01/oracle/pixappl/pwr/11.5.0/oc4j/j2ee/home/application-deployments/iLogin/iLogin/persistence/_pages/_iLogin.java:14: Class java.sql.Connection not found in import.
import java.sql.Connection;
</pre>
12/5/13 6:06 PM iLogin: Recursive error in error-page calling for /iMODError.jsp
javax.servlet.ServletException: Recursive error in error-page calling for /iMODError.jsp (status 500)
  at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse.sendError(EvermindHttpServletResponse.java:1204)
  at oracle.jsp.runtimev2.JspReportUtil.sendError(JspReportUtil.java:96)
  at oracle.jsp.runtimev2.JspReportUtil.reportException(JspReportUtil.java:125)
  at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:573)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:272)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:721)
  at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
  at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse.sendError(EvermindHttpServletResponse.java:1244)  and the same errors are repeated

Similar Messages

  • Unable to bind socket: Address already in use

    Hi,
    I get the following error whenever I start my Application Server on Linux machine.
    If I deploy the EJB application onto a OC4J instance, the server is refusing the connection by throwing Connection Refused error.
    Any insight about this issue will be helpful.
    Thanks,
    Mohan
    04/07/08 17:14:42 Error starting ORMI-Server. Unable to bind socket: Address already in use
    04/07/08 17:14:44 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0) initialized
    04/07/08 17:14:44 java.lang.NullPointerException
    04/07/08 17:14:44 at com.evermind.server.rmi.RMIServer.run(RMIServer.java:470)
    04/07/08 17:14:44 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Releasabl
    eResourcePooledExecutor.java:186)
    04/07/08 17:14:44 at java.lang.Thread.run(Thread.java:534)

    have you checked to see what is running before you start your oracle app server on your ports? you can use netstat for one

  • Error starting ORMI-Server.  Unable to bind socket: Address already in use:

    hi,
    I run the folowing command "start_oc4j.bat" to start Oc4j.
    It starts successfully.
    Then I start "BPEL PM Server".
    I get the following error,
    "Error starting ORMI-Server. Unable to bind socket: Address already in use: JVM_Bind".
    I understand the above errror because both of them are trying to bind to the same port. And both of them are trying to start ORMI server. Can some one suggest how to get rid of this problem.
    I tried giving different port numbers for them, but that did not work. Let me know, how to over come this problem.
    with regards
    shaila

    You may have another OC4J running on your computer.
    You should change the port number in the file config/rmi.xml.

  • Error starting ORMI-Server. Uable to bind socket

    Hi,
    I get the following error whenever I start my Application Server on Linux machine.
    If I deploy the EJB application onto a OC4J instance, the server is refusing the connection by throwing Connection Refused error.
    Any insight about this issue will be helpful.
    Thanks,
    Mohan
    04/07/08 17:14:42 Error starting ORMI-Server. Unable to bind socket: Address already in use
    04/07/08 17:14:44 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0) initialized
    04/07/08 17:14:44 java.lang.NullPointerException
    04/07/08 17:14:44 at com.evermind.server.rmi.RMIServer.run(RMIServer.java:470)
    04/07/08 17:14:44 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Releasabl
    eResourcePooledExecutor.java:186)
    04/07/08 17:14:44 at java.lang.Thread.run(Thread.java:534)

    Hi Avi,
    of course you are right that the standalone OC4J ist not the same as an OC4J instance within the Oracle Application Server though from my point of view many J2EE-Server related questions or problems regarding the EJB- and or WEB-container could be answered/handled same or equally.
    That's why I'm a little bit irritated by your statement. From a forum user's perspective I'd hate it to follow eg all those Forms and Reports service discussions if I were a Java Developer or Deployer. So I would like to see all posts regarding the OC4J-Container here (no matter if standalone or inside OAS). Nevertheless everybody should clearly indicate the exact product version including the distinction beetween standalone and OAS.
    Just my 0.2 about this. What do others think?
    Avi, if you really want all discussion about OAS including OC4J topics to happen within the "Application Server - General" forum, I'd suggest you add a forum description which makes that clear.
    Well, if one can persuade you to not follow such a strict separation as I argued against, it could be still beneficial to add a meaningful forum description (eg. to remind people of the distinction between standalone OC4J and OAS.
    Thoughts?
    Regards,
    Eric

  • Cups - Unable to bind socket for address

    At first I must say, than CUPS is the bigger shit I have ever seen on Linux. I have configured many daemons like: Apache, Lighttpd, MySQL or dnsmasq. Everything always just work, but not CUPS. I have configured it for 15-20 times. I always need about 5-10 hours to run it, and I've never known why it started work - probably it is randomly like Windows
    Now, CUPS works fine on server, and I can print from laptop. But I've reinstalled Arch on PC. I've copied /etc/cups/ from laptop to PC, and now I can't start CUPS:
    /etc/rc.d/cups start
    :: Starting CUPS Daemon [BUSY]
    cupsd: Child exited on signal 15!
    /var/log/cups/error_log   
    I [11/Oct/2008:14:45:22 +0200] Listening to 208.69.34.132:631 (IPv4)
    I [11/Oct/2008:14:45:22 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
    I [11/Oct/2008:14:45:22 +0200] Using default TempDir of /var/spool/cups/tmp...
    I [11/Oct/2008:14:45:22 +0200] Configured for up to 100 clients.
    I [11/Oct/2008:14:45:22 +0200] Allowing up to 100 client connections per host.
    I [11/Oct/2008:14:45:22 +0200] Using policy "default" as the default!
    I [11/Oct/2008:14:45:22 +0200] Full reload is required.
    I [11/Oct/2008:14:45:22 +0200] Loaded MIME database from '/etc/cups': 35 types, 39 filters...
    D [11/Oct/2008:14:45:22 +0200] Loading printer Domowa...
    D [11/Oct/2008:14:45:22 +0200] Loading printer tmp...
    D [11/Oct/2008:14:45:22 +0200] Discarding unused printer-stopped event...
    E [11/Oct/2008:14:45:22 +0200] Filter "foomatic-rip" for printer "tmp" not available: No such file or directory
    D [11/Oct/2008:14:45:22 +0200] Scanning /var/spool/cups for jobs...
    I [11/Oct/2008:14:45:22 +0200] Full reload complete.
    I [11/Oct/2008:14:45:22 +0200] Cleaning out old temporary files in "/var/spool/cups/tmp"...
    E [11/Oct/2008:14:45:22 +0200] Unable to bind socket for address 208.69.34.132:631 - Cannot assign requested address.
    X [11/Oct/2008:14:45:22 +0200] No Listen or Port lines were found to allow access via localhost!
    /etc/cups/cupsd.conf
    LogLevel debug
    SystemGroup sys root
    Listen localhost:631
    DefaultAuthType Basic
    I haven't any idea what it is: 208.69.34.132. It think it is in USA.
    socklist | grep 631 - clear
    Only deference between pc and laptop it's kernel - on pc I use 2.6.24

    I had the same problem.  I solved it doing 2 things.  (1) I replaced my /etc/cups/cups.conf with /etc/cups/cups.conf.default and (2) I added an acl option in the fstab.  Do a search on the forum for acl and you should see it.
    -rico

  • Error starting ORMI-Server. Unable to bind socket...

    One of our BPEL App Servers was moved from a local network to a LAN. I believe it's IP was changed. When we start it with opmnctl startall we get the following error message:
    bq. Error starting ORMI-Server. Unable to bind socket: Cannot assign requested address
    There does not seem to be a resource issue with regard to ports. A netstat -p doesn't show any potential port conflicts. In a WEB search I came across the following suggested check:
    bq. Solution: \\ *A) Check if your IP address or hostname is changed or if there is a conflict of resources in the network*
    Can someone explain what needs to be fixed if the IP Address or hostname of the BPEL App Server has changed? What files need to be corrected to get the install to startup.

    You may have another OC4J running on your computer.
    You should change the port number in the file config/rmi.xml.

  • Only one usage of each socket address is no normally permitted....

    I am getting the below error?
    In logs the below error is showing:
    java.lang.Exception: Socket bind failed: [730048] Only one usage of each socket address (protocol/network address/port) is normally permitted.
    Could you please give some idea to sort out the below issue.
    Thanks in Advance.
    Hi All,
    I m new to JSF, spring and Hibernate web application. I have done a web project using JSF, Hibernate and Spring. We have to maintain the Data records which is stored in mysql db. Now there are different table is there such as example Employee Details and Company Details. So we created two seperate application o tomacat, For both Application we use same functionality except the JSP FILE Name and table name (Which is changed according to Application).
    In the employee.hbm.xml
    I changed the table name.
    Now while running the application on the tomcat server, only one application is running at a time. if we start running the Employee Application, then Company Application is giving the below error,
    Error:
    The Company is not Available
    Error in Log:
    The resourse is already in used/busy. or JNDI error.
    Could you please help us, how to overcome the error,
    Is it not possible to run both the application on different browsers.
    Thanks in advance.
    Saratha.

    Saratha wrote:
    I am getting the below error?
    In logs the below error is showing:
    java.lang.Exception: Socket bind failed: [730048] Only one usage of each socket address (protocol/network address/port) is normally permitted.
    Could you please give some idea to sort out the below issue.
    Thanks in Advance.The port is already in use by another process. Apparently you've another process (the same or another kind of application server) running at the same port.
    This problem is completely unrelated to JSF.
    Hi All,
    I m new to JSF, spring and Hibernate web application. I have done a web project using JSF, Hibernate and Spring. We have to maintain the Data records which is stored in mysql db. Now there are different table is there such as example Employee Details and Company Details. So we created two seperate application o tomacat, For both Application we use same functionality except the JSP FILE Name and table name (Which is changed according to Application).
    In the employee.hbm.xml
    I changed the table name.
    Now while running the application on the tomcat server, only one application is running at a time. if we start running the Employee Application, then Company Application is giving the below error,
    Error:
    The Company is not Available
    Error in Log:
    The resourse is already in used/busy. or JNDI error.
    Could you please help us, how to overcome the error,
    Is it not possible to run both the application on different browsers.
    Thanks in advance.
    Saratha.What is this? Why have you copypasted the question of your another topic? [http://forums.sun.com/thread.jspa?threadID=5332093]

  • Ipv4 mapped addresses bind problem: address already in use.

    Hello. It's me again with another, may be newbie, question.
    This time I observe different behavior binding different type of ip addresses on tcp sockets. For instance
    - when I bind ipv4 mapped addresses, if there is a remaining old socket in TIME_WAIT state from a previous run
    I get the error 'Address already in use', event with SO_REUSEADDR set.
    - when I bind another type of ipv6 or just ipv4 addresses. if there if a remaining old socket in TIME_WAIT state from
    a previous run, the bind is successful (SO_REUSEADDR is set).
    How can be explained this behavior?
    Thanks a lot.
    Details
    =======
    I made a small program to test this. This program:
    - dump the addresses to be used in bind() and connect()
    - creates a LISTEN SOCKET calling
    - socket(AF_INET6, SOCK_STREAM, 0)
    - fcntl(F_SETFD, fcntl(F_GETFD) | FD_CLOEXEC)
    - fcntl(F_SETFL, fcntl(F_GETFL) | O_NONBLOCK),
    - setsockopt(SO_REUSEADDR),
    - setsockopt(SO_KEEPALIVE),
    - setsockopt(TCP_NODELAY),
    - bind()
    - listen()
    - creates a CONNECTING SOCKET calling
    - socket(AF_INET6, SOCK_STREAM, 0)
    - fcntl(F_SETFD, fcntl(F_GETFD) | FD_CLOEXEC)
    - fcntl(F_SETFL, fcntl(F_GETFL) | O_NONBLOCK),
    - setsockopt(SO_REUSEADDR),
    - setsockopt(SO_KEEPALIVE),
    - setsockopt(TCP_NODELAY),
    - connect()
    - creates a ACCEPTED SOCKET calling
    - accept()
    - fcntl(F_SETFD, fcntl(F_GETFD) | FD_CLOEXEC)
    - fcntl(F_SETFL, fcntl(F_GETFL) | O_NONBLOCK),
    - setsockopt(SO_REUSEADDR),
    - setsockopt(SO_KEEPALIVE),
    - setsockopt(TCP_NODELAY),
    - issue a std::system( "netstat -an | grep 10329" )
    - wait with select() for a write event in the CONNECTING SOCKET
    - wait with select() for a write event in the ACCEPTED SOCKET
    - close the accepted socket
    - close the connecting socket
    - close the listen socket
    - issue another std::system( "netstat -an | grep 10329" )
    - exit(0)
    Note: please don't get confused with my notation of addresses, the last component, after the last colon, is the port.
    I run it with ipv4 mapped listen address, with this result:
    $ ./test_reuseaddr listen_address=0.0.0.0:10329 connect_address=127.0.0.1:10329
    Listener in *'::ffff:0.0.0.0:10329'*
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 |................|
    Connect to '::ffff:127.0.0.1:10329'
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 ff ff 7f 00 00 01 00 00 00 00 00 00 00 00 |................|
    Creating listen socket
    Creating connecting socket
    Creating accepted socket
    netstat -an | grep 10329
    *.10329 *.* 0 0 49152 0 LISTEN
    127.0.0.1.35114 127.0.0.1.10329 49152 0 49152 0 ESTABLISHED
    127.0.0.1.10329 127.0.0.1.35114 49152 0 49152 0 ESTABLISHED
    Closing connecting socket
    Closing accepted socket
    Closing listen socket
    netstat -an | grep 10329
    *127.0.0.1.10329 127.0.0.1.35114 49152 0 49152 0 TIME_WAIT*
    Immediately run it again the same way, with this result (Address already in use):
    $ ./test_reuseaddr listen_address=0.0.0.0:10329 connect_address=127.0.0.1:10329
    Listener in *'::ffff:0.0.0.0:10329'*
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 |................|
    Connect to '::ffff:127.0.0.1:10329'
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 ff ff 7f 00 00 01 00 00 00 00 00 00 00 00 |................|
    Creating listen socket
    *### SYSCALL ERROR: bind(): 125, Address already in use*
    Wait and verify that the TIME_WAIT socket has disappeared
    $ sleep 120
    $ netstat -an | grep 10329
    Now run the same program with normal ipv6 listen addresses
    $ ./test_reuseaddr listen_address=*::0*:10329 connect_address=127.0.0.1:10329
    Listener in *':::10329'*
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
    Connect to '::ffff:127.0.0.1:10329'
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 ff ff 7f 00 00 01 00 00 00 00 00 00 00 00 |................|
    Creating listen socket
    Creating connecting socket
    Creating accepted socket
    netstat -an | grep 10329
    *.10329 *.* 0 0 49152 0 LISTEN
    127.0.0.1.35115 127.0.0.1.10329 49152 0 49152 0 ESTABLISHED
    127.0.0.1.10329 127.0.0.1.35115 49152 0 49152 0 ESTABLISHED
    *.10329 *.* 0 0 49152 0 LISTEN
    Closing connecting socket
    Closing accepted socket
    Closing listen socket
    netstat -an | grep 10329
    *127.0.0.1.10329 127.0.0.1.35115 49152 0 49152 0 TIME_WAIT*
    Immediately run it again the same way (no error this time)
    $ ./test_reuseaddr listen_address=*::0*:10329 connect_address=127.0.0.1:10329
    Listener in *':::10329'*
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
    Connect to '::ffff:127.0.0.1:10329'
    1a 00 28 59 00 00 00 00 00 00 00 00 00 00 00 00 |..(Y............|
    00 00 ff ff 7f 00 00 01 00 00 00 00 00 00 00 00 |................|
    Creating listen socket
    Creating connecting socket
    Creating accepted socket
    netstat -an | grep 10329
    127.0.0.1.10329 127.0.0.1.35115 49152 0 49152 0 TIME_WAIT
    *.10329 *.* 0 0 49152 0 LISTEN
    127.0.0.1.35116 127.0.0.1.10329 49152 0 49152 0 ESTABLISHED
    127.0.0.1.10329 127.0.0.1.35116 49152 0 49152 0 ESTABLISHED
    *.10329 *.* 0 0 49152 0 LISTEN
    Closing connecting socket
    Closing accepted socket
    Closing listen socket
    netstat -an | grep 10329
    *127.0.0.1.10329 127.0.0.1.35115 49152 0 49152 0 TIME_WAIT*
    *127.0.0.1.10329 127.0.0.1.35116 49152 0 49152 0 TIME_WAIT*
    Run it againg many times with no error.

    sunlover1984 wrote:
    Sorry, to use such short forms in forums as i dont know much about this. i rarly use java forum. well, i removed the code that i gave u for server starting. but still it is giving me the same error. this time i put it in a java bean file.(Hint "u" is just another short form).
    Did you try the suggestion to put a log statement just before you start the server? Or put a breakpoint at that line and see how often it is reached.
    Because the only reason for this problem is that something is already listening at that port.
    And if there's really nothing listening before you start you application, then only your application itself can listen there already, so the logical conclusion for me would be that you're starting the Server twice.

  • SmbServer: could not create socket: Address already in use

    When I start SmbServerAgent,
    it fails again and again.
    In SmbServer.log there exists
    "SmbServer: could not create socket: Address already in use,"
    but SmbServer was already shutdown.
    How do resolve such issue? Thanks a lot.
    ergent

    Something else is already using that TCP port.
    BTW you can only re-use a TCP port number if you're binding to a different NIC IP address than the one bound by the previous binder to that TCP port. You're not, so you can't.

  • ERROR: transport error 202: bind failed: Address already in use

    Hey guys,
    I created 2 WL 10.3 Domains. I can start the admin server in domain but when I start the second admin server i get the following error:
    starting weblogic with Java version:
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
    ./../src/share/back/debugInit.c:690]
    FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
    RROR_TRANSPORT_INIT(197)
    Starting WLS with line:
    C:\bea\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
    ,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -XX:Com
    pileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -XX:MaxPermSize=160m
    -Xverify:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:
    javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.
    sbconsole... -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\serv
    er -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=tru
    e -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true
    -Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classp
    ath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch
    cie670\profiles\default\sysextmanifest_classpath;C:\bea\patch_alsb1031\profile
    s\default\sysext_manifest_classpath -Dweblogic.Name=TestAdmin2 -Djava.security.p
    olicy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
    ./../src/share/back/debugInit.c:690]
    FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
    RROR_TRANSPORT_INIT(197)
    Stopping PointBase server...
    I changed the port address of both admins but I dont' think that's the issue. Can someone tell me whats going on.
    Thanks

    Hi
    Iam getting the Same Error , Can you provide me some information on what changes did you made to the setDomainEnv.cmd file to make this work
    thanks in advance

  • Transport error 202 bind failed address already in use

    how to rectify -- transport error 202 bind failed address already in use-- while running CA server
    i have created new production and pub server, first i runned production server after that while running CA server i got that error. if i run CA server independently its running

    It seems like a port conflict issue. You should check rmi and other ports in the configuration file for the component /atg/dynamo/Configuration in the localconfig of your production and publishing servers directories under <ATG>\home\servers. Also, your app server should be configured to run two separate instances for production and publishing server as per the http ports specified in /atg/dynamo/Configuration.

  • How to resolve error 'The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted'

    One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
    The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
    I have tried uninstalling/reinstalling the agent but this does not resolve the issue
    Any help would be greatly appreciated.
    Thanks
    William Hickson

    Hi
    Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
    http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
    If this doesn't do the trick try reinstall the agent.
    Best Regards
    Robert Hedblom
    MVP DPM
    Check out my DPM blog @ http://robertanddpm.blogspot.com

  • After applying BM3.8.5_ir1: "IKESetupSocket: Unable to bind socket!", IKE not loading

    Hello,
    I just applied the Interim Release 1 BM3.8.5 and rebootet the server after at
    least several months of uptime when the patch files were applied - so it might be
    related to 385_ir1; Or something went wrong during the last months of uptime that
    way; that a reboot just caused the trouble to be revealed.
    Well, on the next reboot after applying BM3.8.5_ir1 I got this on the IKE screen:
    -------------------------- IKE SCREEN ----------------------------------
    3-19-2008 12:53:41 pm IKESetupSocket: Unable to bind socket!
    [snip empty lines]
    <Press any key to close screen>
    -------------------------- IKE SCREEN ----------------------------------
    At this state these TCP NLMs were loaded:
    TCP.NLM
    Loaded from [SYS:SYSTEM\] on Mar 19, 2008 12:35:40 pm
    (Address Space = OS)
    Novell TCP/IP Stack - Transport module (Domestic)
    Version 6.91.05 October 25, 2007
    Copyright 1994-2007 Novell, Inc. All rights reserved. Patent pending.
    TCPIP.NLM
    Loaded from [SYS:SYSTEM\] on Mar 19, 2008 12:35:40 pm
    (Address Space = OS)
    Novell TCP/IP/IPSec Module (Domestic) NICI Enabled
    Version 6.91.10 October 25, 2007
    Copyright 1994-2007 Novell, Inc. All rights reserved
    Patent pending Portions Copyright 1986-1995, RSA Data Security, Inc.
    BSDSOCK.NLM
    Loaded from [SYS:SYSTEM\] on Mar 19, 2008 12:35:40 pm
    (Address Space = OS)
    Novell BSDSOCK Module (Domestic)
    Version 6.91.04 October 25, 2007
    Copyright 1994-2007 Novell, Inc. All rights reserved.
    As it's a socket error I thought that applying the latest TCP patch might help
    out:
    TCP681K, another reboot, but no change at all.
    As IKE isn't loading server side all VNP functions are not operational.
    PKIDIAG is without errors, if these certificates should interact with IKE as well
    (I honestly have to state, that I don't know, if or if not these Certs interact
    with IKE ...)
    Anybody a quick solution? Otherwise I'll try to backrev to BM3.8.5 and the prior
    TCP version.
    Thanks for any input.
    Regards, Rudi.
    IT-Beratung Rudolf Thilo
    Schweinfurter Str. 131
    97464 Niederwerrn
    t: +49 (0)9721/6464840
    f: +49 (0)9721/6464841
    m: +49(0)171/685 9 685

    Hello,
    after investigating in a totally wrong direction for many hours <doh!> I finally
    back-rev.ed the lib files from c:\nwserver\!backup.lib and
    sys:system\!backup.lib, after that was done the IKE had no trouble any more.
    In the load sequence of the server's reboot NMAS had a load error that pointed in
    that direction... (several DS*.NLMs in the LIB patch files)
    I have a looger screen save file of both, a "trouble boot" and a clean boot after
    removing the patch files. What I missed was to draw a config.txt of the trouble
    state. :(
    Quite interesting is the fact, that after may be 30 - 60 Minuntes of uptime the
    BM had difficulties to access the C: drive:
    ----------------------------Logger Screen ------------------------------------
    NetWare Configuration File Transfer Cache to DOS Error: 0x4
    Registry rolling back to last known good registry file.
    ----------------------------Logger Screen ------------------------------------
    Then no NLMs could be loaded any more at all: Neither DOS side, nor sys:system or
    from anywhere else. Funny fact: With the already loaded toolbox a "DIR" was
    presenting everything absolutely normal, DOS and SYS: side....
    Well, the NBM-Rule-Container is restored now from tape, the filters.txt is as it
    was before (seveal reboots) and with my 2nd. BM install I was painfully
    remembered that there can be just one BM per container <grrr> ;) (nice design...)
    Patches applied when the trouble showed up
    NW6.5SP6
    BM3.8SP5
    plus the hotfixes available till Dec 2007
    Finally I applied these (many hours ago >-O~ )
    LIBCSP6B
    NWLIB6K
    WSOCK6N
    TCP681K
    BM3.8.5_ir1
    .... in the timed order they were given to the public (I didn't check right now,
    the order above isn't necessarily the right order I used.)
    If someone should be interested in the logger.txt of both states, they are too
    large for *one* posting here, drop me an email.
    Regards, Rudi.
    IKESetupSocket: Unable to bind socket!
    IKE not loading any more
    NMAS error in boot sequence
    Error accessing registry files,
    NLM load from all search paths impossible
    IT-Beratung Rudolf Thilo
    Schweinfurter Str. 131
    97464 Niederwerrn
    t: +49 (0)9721/6464840
    f: +49 (0)9721/6464841
    m: +49(0)171/685 9 685

  • JCA Binding Component connection issue in the Oracle Order Demo Application

    Hi,
    I setup the Oracle Fusion Middleware. I also deployed the Oracle Fusion Order Demo Application in the soa_server. I placed the order in the store front web.I initiated the webservice (OrderBookingService) and found the below error in the soa_server_diagnostic log file.
    =====================================================================================================================================
    Caused by: BINDING.JCA-12563
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: JCA Binding Component connection issue.
    JCA Binding Component is unable to create an outbound JCA (CCI) connection.
    OrderBookingComposite:USPSShipment [ Write_ptt::Write(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510
    JCA Resource Adapter location error.
    Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>
    The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/file/FODFileAdapter'.
    The reason for this is most likely that either
    1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or
    2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/file/FODFileAdapter. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR).
    Please correct this and then restart the Application Server
    The invoked JCA adapter raised a resource exception.
    =====================================================================================================================================

    Thanks Guys.
    I resolved the issue.
    The issue is that FileAdapter for FulFillment mediator is missing.
    Solution 1:
    File adapter connection factory needs to be created via the weblogic console
    The details below:     
         JNDI Name: eis/file/FODFileAdapter
         controlDir          java.lang.String     /tmp/control
         inboundDataSource     java.lang.String     jdbc/SOADataSource
         outboundDataSource     java.lang.String     jdbc/SOADataSource
         outboundDataSourceLocal     java.lang.String     jdbc/SOALocalTxDataSource
         outboundLockTypeForWritejava.lang.String     oracle
    Solution 2:
    seedFodFileAdapterResources target in $FOD_HOME/bin/common-sca-tools.xml needs to be executed to create the file adaptor.
    Thanks.
    Ilayaraja

  • "Error Starting OMI-Server. Unable to bind socket.Permission denied. Listen

    Hi All,
    I Installed Forms 1o-g successfully on my mishon ( Version windows vista), when i try to connect Forms i got error
    like this *"Error Starting OMI-Server. Unable to bind socket.Permission denied. Listen*
    Plz Anyone help....
    Thanks
    sa.....

    Which version of Windows Vista? Bear in mind that Vista home edition is not supported by Oracle (I think for all products). If that is the case, you should be upgrading your OS to business or ultimate edition.
    If that is not the case, please get in touch with Oracle support. Not much is available on internet or in forums (as you seem to have posted this in Forms forum as well).

Maybe you are looking for

  • Need to reinstall Os X Mavericks,

    '' This apple id has not yet been used with the App Store. Please reveiw your account information '' I just got it back from the repair shop and everything has been switched out, hardrive, battery, motherboard etc.  and i cant get onto it without ins

  • Problem with database resource manager.

    Hello to all, I am using 10.2.0.1 I am enterprise manager to assign user scott and hr to 'appuser' consumer group. I created a plan which specifies that appuser consumer group will be switched to sys_group after executing for 1 minute, but it is not

  • The use of CL_ABAP_CONV_OUT_CE to create an unicode-16 (UTF-16) file

    Hello, I have to create a file iwth normal text in UTF-16 format. In ABAP the creation of an UTF-8 file is very easy (open dataset for output in UTF-8). However UTF-16 is barely documented. and the normal open dataset does not support utf-16. The onl

  • Why is the keyboard shortcut for 'Select next input source' disabled when using Safari?

    I'm using Safari 6.0.5 and am running 10.8.4 on a MacBook Pro 13" from last year. I've been using Chrome and Firefox heavily recently, but switched to Safari to give it a chance. It's really nice and lightweight, which suits me. However, for some rea

  • Material ledger and standard cost estimate

    Hi Gurus, When standard cost estimate is done in a scenario, where  material ledger is activated, does the entire stock get revaluated andl post a credit in my P/L? Is it possible  to keep my inventory(FG and SFG) at periodic unit price ie at the act