.OCB Files Through File Receiver Adapter

Hi All,
There is a requirement to send file from XI in .ocb format.
I am not very much sure whether XI supports this format in File Receiver Channel.
Has anybody worked on this scenario earlier?
Please let me know whether XI can write file with extension .ocb from File Receiver Chanel?
Please help me !!
Thanks,
Shweta.

Hi,
>Please let me know whether XI can write file with extension .ocb from File Receiver Chanel?
File name with extension .ocb in file adapter is possible.
Regards,
sangeetha

Similar Messages

How to append records in a file, through file adapter.

Hi All,
How to append records in a file, through file adapter.
I have to read data from database and need to append all records in a file.
Thanks in Advance.

Hi,
I think you have a while loop to hit the DB in your Process (As you said you have to fetch data from DB 10 times if 1000 rec are there)
First sopy your DB O/P to one var
and from second time append to previous data.(Otherwise you can directly use append from starting instead of copy and append)
When loop completes you can transform to File adapter Var.
Otherwise you can configure yourFileadapter such that it will aapend current records to previous records.
You can use 'Append= true' in your file adapter wsdl.
It will append previous records to current records in the same file.
Regards
PavanKumar.M

Use temporary file in FTP receiver adapter

Hi guys,
I'm not getting the purpose of "use temporary file" in FTP receiver adapter. Can you describe any situation, where this should be used?
What is the location of this temporary file?
Is it deleted after "normal" file is created?
Thanks a lot,
Olian

> I'm not getting the purpose of "use temporary file" in FTP receiver adapter. Can you describe any situation, where this should be used?
Some times when you create the file on your target dir then if there is another application looking for same file is quite faster to pick the file before it is complety written on target dir then in this situation using temporary file option is very helpful. What it does, it simply creates the file first by using temporary name once all bytes or bits has been transfered then it creates the original name and the temp file get deleted.
> What is the location of this temporary file?
Same location, where your original file is suppose to be written.
> Is it deleted after "normal" file is created?
Yes.
Regards,
Sarvesh

Read an xml file through file adapter?

How do i read an xml file through file adapter?

Hi,
This is pretty straight forward.
Just configure the sender file adapter without any file content conversions.
Read this for more information:
http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Ravi

How to attach Excel file in Mail Receiver Adapter?

Hello Experts,
In R/3 coding I have Internal Table data available for which i have to generate an Alert mail with Excel file attachment.
This is the scenario of Proxy sender to Mail Receiver. but I don't know how to convert the Internal Table data into Alert mail excel File attachment.
Please suggest me.
Regards,
Jagesh

Hi Santhosh,
Thanks for your suggestion.
But without using XSLT mapping also, I have generated the Excel File attachment.
Throgh R/3 coding I am passing following.
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From Mail Address.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = TO Mail Address.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-SUBJECT = 'Test Alert mail'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-DATE = SY-DATUM.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE =   'text/plain;name="CSV_data.csv"'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = 'Testing1,Testing2,Testing3'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_DISPOSITION = 'attachment'.
And in the Mail Receiver Adapter i have configured as following.
Use Mail package and Keep Attachment both options are selectd.
So I am getting the data in different columns in the excel file But How to set the Next ROW in Excel file?
I thnk i am missing something in CONTENT value.
Regards
Jagesh

File Content Conversion - Receiver Adapter

Hi To All
I have an XML Structure
<LIST>
     <Seg1>
          <Element1>123</Element1>
     </Seg1>
     <Seg2>
          <Element1>ABC</Element1>
          <Element2>DEF</Element2>
          <Element3>GHF</Element3>
        </Seg2>
<LIST>
I'm using File content conversion in receiver Adapter
I want my output like this.
ABCDEFGHF
I don't need the Segment Seg1.
In my parameters RecordsetStructure only I have Seg2 and the details for this Segment
but When I receive a file, the adapter convert with segment 1.
123
ABCDEFGHF
can you help me?.

easiest alternative is mentioned here already, drop it in the mapping.
You can also try to write a java pgm and invoke it as an OS command. that cuts the segment1 out before passing it to content conversion. ..more painful..but will work.
Regards
Ravi Raman

File Name Scheme - Receiver Adapter

Hi,
I have a File Receiver Adapter which is using content conversion to take in XML and output a file. I want the output file to be called EOD286ccyymmdd.txt where ccyymmdd is the current date. Seems to be 2 options for file names:
1. Add Time Stamp: No use as this adds the Date & Time. I only want the date.
2. Variables: Don't think I can use this as it only seems to work if the data is part of the XML message packet. The date in ccyymmdd format is not contained in the XML anywhere.
Is there anyway of getting the File Scheme Name I want ?
Cheers,
PaulC.

Hi,
You have one option in the File adapter receiver channel: 'Run Operating System command After message processing", where you can give any std OS command or you can give batch file (.bat) to run after the message processing. In batch file, you can write a set of commands which would rename the file according to your name format.
Another bit complex solution is create your own custom adapter module and change the file name scheme.
Thanks,
RK

How to get zip file in SFTP receiver adapter

Hi Experts,
we got one scenario, which the PI need to pick the .zip file from file path using file adapter and process to SFTP server with same name and extension .zip.
we tried using ASMA setting and when ever we are placing the '*' in receiver channel file name , it showing error as "Putting * failed".
so could you please provide solution how we can able to receive the .zip file with same name.
regards
raju

Hi Raju,
In ASMA the default namespace was like this http://sap.com/xi/XI/System you can changed it to http://sap.com/xi/XI/System/File.
please try this...
Regards
srinivas

PGP Encryption Exception in File and SFTP receiver adapter.

Scenario: We have got the PGP (Private and Public key pair) and stored the same in PI server path.
We have sample partner Public key which is store at temporary shared location for testing purpose.
Issue: While doing the encryption we are getting below exception in case of File Adapter and SFTP adapter.
Case 1: File Receiver Adapter
Case 1: SFTP Receiver Adapter
Can anyone please suggest on below exception?
How to proceed to resolve the above issue or what should be the cause of the issue?
Thanks,
Vertika

Hi everyone,
Thanks for reply Sarah
I have downloaded and added the JCE unlimited strengthh juristiction policay files are updated as directed in above blogs.
Now I am able to encrypt the File using plane File Adapter (NFS). But still it is throwing exception for SFTP adapter. Below is the error detail:
MP: exception caught with cause javax.ejb.TransactionRolledbackLocalException: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.adapter.pgp.app, BC-XI-CON-B2B) Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.sap.aii.adapter.pgp.ejb.api.PGPEncryptionBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.sap.aii.adapter.pgp.ejb.api.PGPEncryptionBean@2648d238 for bean sap.com/com.sap.aii.adapter.pgp.app*xml|com.sap.aii.adapter.pgp.ejb.jar*xml|PGPEncryption in application sap.com/com.sap.aii.adapter.pgp.app.; nested exception is: java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getMessageKey() of a null object loaded from local variable 'message'; nested exception is: javax.ejb.EJBException: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.adapter.pgp.app, BC-XI-CON-B2B) Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.sap.aii.adapter.pgp.ejb.api.PGPEncryptionBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.sap.aii.adapter.pgp.ejb.api.PGPEncryptionBean@2648d238 for bean sap.com/com.sap.aii.adapter.pgp.app*xml|com.sap.aii.adapter.pgp.ejb.jar*xml|PGPEncryption in application sap.com/com.sap.aii.adapter.pgp.app.; nested exception is: java.lang.NullPointerException: while trying to invoke the method
What could be the reason of above exception in SFTP adapter? Please suggest.
Thanks,
Vertika

Steps to read a file through file adaptor and then i need that to insertDB

Hi anyone please help me in reading a file through jdev and then insert into data base i am able to receive the file the null values and getting inserted..
thanks
saileshan.

Hi,
Please let us know the following -
1) Did you verify that you are able to see all the data in the BPEL process from the File which is read?
2) Are you using a transform or an assign activity to insert data into table?
If using a transform activity, did you test the mapping file (.xslt) and see that the transformations are happening correctly?
Let us know the answers to the above questions before we proceed further.
Thanks,
Ritika

Dynamic Directory and File Naming in Receiver Adapter

Hi ..My Receiver file should Look like this.
COLCCYYMMDDHHMMSSLPMASTER___.tmp
1st 3 bytes: COL ( Sender File name is COLMASTER.txt)
Next 14 bytes is timestamp: CCYYMMHHMMSS
Next 1 byte: L ( constant Value )
Next 1 byte: P/Q/D (Production/QA/Dvlp.. Can we do this based on Sender Logical System ?)
Next 20 bytes ( Part of it comes from Sender file name and remaining fields should be filler with underscores )
Next 4 bytes ( .tmp)
After Iam done with writing this file in .tmp format I should change the file name to .txt format for further processing. Since File gets created dynamically how should I change Name from .tmp to .txt file?
Appreciate help and guidance with steps I neeed to follow to make this happen. Thanx again.

Hi Ram,
One option~~
Use ADAPTER SPECIFIC INDENTIFIERS in both sender and recievr file adapter with the filename selected.
In this case, the filename of sender will be made the file name of the reciver.
Now, change the file name in the mapping in an UDF with the following code, and this will be used as the filename,
String newfilename="";
// Write the logic to get the new file name into this string.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key, <b>newfilename</b>);
return "";
Now, this filename in newfilename string will be used in the target filename.!!
Regards,
Bhavesh

How to place a binary zip files using sftp receiver adapter

Hi experts,
we got one scenario , where we need to pick the file (.zip) from local source path and place it in SFTP server path.
we have done all configuration setting and processed a zip to SFTP server.
but the client are saying the .zip file is not in a binary formate.
so could any please help me and provide solution on this issue.
regards
raju

hi Praveen,
i clicked binary mode option in sender channel, and at receiver side sftp adapter channel i not found any option.
could you please help me.
regards
raju

Creating Flat file using AS2 Receiver adapter

Hello everyone
This is my first AS2 scenario,we are sending 850/Purchaser order information from SAP to partner.
what is the processing sequence and module configuration parameters we need to mention for converting the target structure to flat file?
Regards
Uday

Try to search Seeburger scenarios on SDN. There are many blogs and wikis availble now. There you may refer to BIC, classifier and split modules. Understanding of all these will help you in configuring the scenario. If you are stuck somewhere, come up with specific doubt.
Regards,
Prateek Raj Srivastava

I am trying to save a DMS File through File upload UI element to CV01n Transactions....It works fine for .TXT file but other files it is not downloading coorectly and file is getting damaged

Hi, I am downloading DMS file using following code and the file contents are getting damaged and cannot be retieved back. I am also getting hard time to open a DMS file in seperate browser.
Can anybody please help me.
TYPES : BEGIN OF ty_ts_raw_line,
*                 line TYPE sdokcntbin ,
            line(2550) TYPE x,
           END OF ty_ts_raw_line.
DATA: ls_documentdata TYPE bapi_doc_draw2,
        lv_doctype TYPE   bapi_doc_aux-doctype,
        lv_docnumber TYPE bapi_doc_aux-docnumber,
        lv_documentpart TYPE bapi_doc_aux-docpart,
        lv_documentversion TYPE bapi_doc_aux-docversion,
        ls_return TYPE bapiret2,
        gt_bapi_doc_files2 TYPE TABLE OF bapi_doc_files2,
        gs_bapi_doc_files2 LIKE LINE OF gt_bapi_doc_files2,
        lo_nd_nd_cost_rate TYPE REF TO if_wd_context_node,
        lt_nd_cost_rate TYPE wd_this->elements_nd_cost_rate,
        ls_nd_cost_rate TYPE wd_this->element_nd_cost_rate,
        lv_string TYPE string,
        lv_temp TYPE string,
        lv_input_file_name TYPE string,
        lv_size TYPE i ,
        lt_bindata TYPE STANDARD TABLE OF ty_ts_raw_line," STANDARD TABLE OF zst_ts_raw_line,
        ls_bindata TYPE sdokcntbin,
        ls_drao TYPE drao,
        lt_drao TYPE TABLE OF drao,
        lt_files TYPE cvapi_tbl_doc_files,
        ls_files TYPE cvapi_doc_file,
        ls_api_ctrl TYPE cvapi_api_control,
        ls_message TYPE messages,
        lv_dappl TYPE draw-dappl,
        lv_filename TYPE char200,
        lv_filename_draw_filep TYPE draw-filep,
        lv_doc_succ TYPE c,
        lv_tabix TYPE sy-tabix,
        lv_char_tabix(5) TYPE c,
* get message manager
        lo_api_controller     TYPE REF TO if_wd_controller,
        lo_message_manager    TYPE REF TO if_wd_message_manager,
        lv_text TYPE string,
        lt_tabix TYPE STANDARD TABLE OF sytabix,
        lv_api_ctrl TYPE cvapi_api_control VALUE 'CV01N',
        lv_documentnumber TYPE draw-doknr,
        lt_drat TYPE TABLE OF dms_db_drat,
        ls_drat TYPE dms_db_drat.
CONSTANTS: lc_cst(3) TYPE c VALUE 'CST',
             lc_000(3) TYPE c VALUE '000',
             lc_00(2) TYPE c VALUE '00',
             lc_zng_test(8) TYPE c VALUE 'ZNG-TEST',
             lc_desc(11) TYPE c VALUE 'Cost Rate',
             lc_test(4) TYPE c VALUE 'Test',
*             lc_file_path(31) TYPE c VALUE 'C:\FAKEPATH\COST_RATE_TABLE.TXT',
             lc_x TYPE c VALUE 'X',
             lc_blank TYPE c VALUE '',
             lc_nd(2) TYPE c VALUE '&1'.
FIELD-SYMBOLS <ls_wd_assist_mt_input> LIKE LINE OF wd_assist->mt_input.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager.
* navigate from <CONTEXT> to <ND_COST_RATE> via lead selection
lo_nd_nd_cost_rate = wd_context->get_child_node( name = wd_this->wdctx_nd_cost_rate ).
* @TODO handle non existant child
IF lo_nd_nd_cost_rate IS NOT INITIAL.
    lo_nd_nd_cost_rate->get_static_attributes_table( IMPORTING table = lt_nd_cost_rate ).
ENDIF.
ls_documentdata-documenttype = lc_cst.
ls_documentdata-documentnumber = lc_cst.
ls_documentdata-documentversion = lc_00.
ls_documentdata-documentpart = lc_000.
ls_documentdata-description = lc_desc.
* ls_documentdata-
* ls_drat-dktxt = lc_desc.
* append ls_drat to lt_drat.
* clear ls_drat.
* lv_api_ctrl = 'CV01N'.
LOOP AT lt_nd_cost_rate INTO ls_nd_cost_rate WHERE row_index IS NOT INITIAL.
    lv_tabix = sy-tabix.
*           CALL FUNCTION 'CVAPI_DOC_CREATE'
*         EXPORTING
*           ps_draw              = ls_documentdata " wa_documentfiles
*           ps_api_control       = lv_api_ctrl
*         IMPORTING
*           psx_message          = ls_message
*           pfx_doknr            = lv_documentnumber.
**         TABLES
**           pt_drat_x            = it_drat.
    CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
      EXPORTING
        documentdata    = ls_documentdata
        defaultclass    = 'X'
      IMPORTING
        documenttype    = lv_doctype
        documentnumber = lv_docnumber
        documentpart    = lv_documentpart
        documentversion = lv_documentversion
        return          = ls_return.
    IF ls_return-type CA 'EA'.
      ROLLBACK WORK.
    ELSE.
      COMMIT WORK.
    ENDIF.
    LOOP AT wd_assist->mt_input ASSIGNING <ls_wd_assist_mt_input> WHERE row_index = ls_nd_cost_rate-row_index.
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
          buffer        = <ls_wd_assist_mt_input>-file_data
        IMPORTING
          output_length = lv_size
        TABLES
          binary_tab    = lt_bindata.
      lv_filename_draw_filep = <ls_wd_assist_mt_input>-filename.
      WHILE lv_filename_draw_filep CA '\'.
        SPLIT lv_filename_draw_filep AT '\'
        INTO lv_temp lv_filename_draw_filep.
      ENDWHILE.
      LOOP AT lt_bindata INTO ls_bindata.
        CLEAR ls_drao.
        ls_drao-orblk = ls_bindata-line.
        ls_drao-orln = lv_size.
        ls_drao-dokar = lv_doctype.
        ls_drao-doknr = lv_docnumber.
        ls_drao-dokvr = lv_documentversion.
        ls_drao-doktl = lv_documentpart.
        ls_drao-appnr = '1'.
        APPEND ls_drao TO lt_drao.
        CLEAR ls_drao.
      ENDLOOP.
      CONDENSE lv_input_file_name.
*      lv_input_file_name = 'Test.txt'.
      CALL FUNCTION 'CV120_DOC_GET_APPL'
        EXPORTING
          pf_file   = lv_filename_draw_filep
        IMPORTING
          pfx_dappl = lv_dappl.
      ls_files-appnr = '1'.
      ls_files-dappl = lv_dappl.
      ls_files-filename = lv_filename_draw_filep.
      ls_files-updateflag = 'I'.
      ls_files-langu = sy-langu.
      ls_files-storage_cat = 'SAP-SYSTEM'.
      ls_files-description = lv_filename_draw_filep..
      APPEND ls_files TO lt_files.
      CLEAR ls_files.
      ls_api_ctrl-tcode = 'CV01N'.
      CALL FUNCTION 'CVAPI_DOC_CHECKIN'
        EXPORTING
          pf_dokar           = lv_doctype
          pf_doknr           = lv_docnumber
          pf_dokvr           = lv_documentversion
          pf_doktl           = lv_documentpart
          ps_api_control     = ls_api_ctrl
          pf_content_provide = 'TBL'
          pf_http_dest       = 'SAPHTTPA'
          pf_ftp_dest        = 'SAPFTPA'
        IMPORTING
          psx_message        = ls_message
        TABLES
          pt_files_x         = lt_files
          pt_content         = lt_drao.
      IF ls_message-msg_type CA 'EA'.
        lv_doc_succ = lc_blank.
      ELSE.
        COMMIT WORK.
        lv_doc_succ = lc_x.
        CLEAR lv_text .
        lv_text = <ls_wd_assist_mt_input>-comments.
      ENDIF.
      CLEAR: ls_api_ctrl,ls_message,lt_files[],lt_drao[].
    ENDLOOP.
    IF lv_doc_succ = lc_x.
      ls_nd_cost_rate-dokar = lv_doctype.
      ls_nd_cost_rate-doknr = lv_docnumber.
      ls_nd_cost_rate-doktl = lv_documentpart.
      ls_nd_cost_rate-dokvr = lv_documentversion.
      ls_nd_cost_rate-comments = lv_text.
      MODIFY lt_nd_cost_rate FROM ls_nd_cost_rate INDEX lv_tabix TRANSPORTING dokar doknr doktl dokvr comments.
    ELSE.
      APPEND lv_tabix TO lt_tabix.
    ENDIF.
    CLEAR ls_nd_cost_rate.
ENDLOOP.
I am also having hardtime to show DMS file on browser.

Hi I've done DMS Creation like below code. Just check it .
      LS_DOC-DOCUMENTTYPE    = LW_DMS_APP-DOCUMENTTYPE.
      LS_DOC-DOCUMENTVERSION = LW_DMS_APP-DOCUMENTVERSION.
      LS_DOC-DOCUMENTPART    = LW_DMS_APP-DOCUMENTPART.
      LS_DOC-STATUSEXTERN    = LW_DMS_APP-STATUSEXTERN.
      LS_DOC-LABORATORY      = ' '.
CONCATENATE WD_THIS->LW_REQ-BUKRS LS_DMS-REQ_NO LS_DMS-CR_YR INTO LW_OBJKEY SEPARATED BY '\'.
      LW_DRAD-OBJECTKEY = LW_OBJKEY.
      LW_DRAD-OBJECTTYPE = 'ZAPR_REQ'.
      APPEND LW_DRAD TO LT_DRAD.
      LW_DRAT-LANGUAGE = SY-LANGU.
      LW_DRAT-DESCRIPTION = LS_STRIPPEDNAME.
      APPEND LW_DRAT TO LT_DRAT.
      CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
        EXPORTING
          DOCUMENTDATA         = LS_DOC
        IMPORTING
          DOCUMENTTYPE         = LF_DOCTYPE
          DOCUMENTNUMBER       = LF_DOCNUMBER
          DOCUMENTPART         = LF_DOCPART
          DOCUMENTVERSION      = LF_DOCVERSION
          RETURN               = LS_RETURN
        TABLES
          DOCUMENTDESCRIPTIONS = LT_DRAT
          OBJECTLINKS          = LT_DRAD.
*--------Creating DMS Document Using BAPI-----------------*
      IF LS_RETURN-TYPE NA 'EA'.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            WAIT = 'X'.
      LS_DRAW-DOKAR = LW_DMS_APP-DOCUMENTTYPE.
      LS_DRAW-DOKVR = LW_DMS_APP-DOCUMENTVERSION.
      LS_DRAW-DOKTL = LW_DMS_APP-DOCUMENTPART.
      LS_DRAW-DWNAM = SY-UNAME.
      LS_DRAW-DOKST = LW_DMS_APP-STATUSEXTERN.
      LV_STORAGE_CAT = LW_DMS_APP-STORAGECATEGORY.
      LS_API_CONTROL-TCODE = 'CV01N'.
      IF LF_DOCNUMBER IS NOT INITIAL.
        CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
          EXPORTING
            BUFFER        = LS_DMS_FILE-FILE_CTGRY
          IMPORTING
            OUTPUT_LENGTH = LV_SIZE
          TABLES
            BINARY_TAB    = LT_BINDATA.
        LOOP AT LT_BINDATA INTO LS_BINDATA.
          CLEAR LS_DRAO.
          LS_DRAO-ORBLK = LS_BINDATA-LINE.
          LS_DRAO-ORLN = LV_SIZE.
          LS_DRAO-DOKAR = LS_DRAW-DOKAR.
          LS_DRAO-DOKNR = LF_DOCNUMBER.
          LS_DRAO-DOKVR = LS_DRAW-DOKVR.
          LS_DRAO-DOKTL = LS_DRAW-DOKTL.
          LS_DRAO-APPNR = '1'.
          APPEND LS_DRAO TO LT_DRAO.
        ENDLOOP.
        CALL FUNCTION 'CV120_DOC_GET_APPL'
          EXPORTING
            PF_FILE   = LS_STRIPPEDNAME
          IMPORTING
            PFX_DAPPL = LS_FILES-DAPPL.
        LS_DRAW-FILEP = LS_STRIPPEDNAME.
        LS_DRAW-DAPPL = LS_FILES-DAPPL.
        LS_FILES-APPNR = '1'.
        LS_FILES-FILENAME = LS_STRIPPEDNAME.
        LS_FILES-UPDATEFLAG = 'I'.
        LS_FILES-LANGU = SY-LANGU.
        LS_FILES-STORAGE_CAT = LW_DMS_APP-STORAGECATEGORY. "'ZDMS_DI'.
        LS_FILES-DESCRIPTION = LS_STRIPPEDNAME.
        APPEND LS_FILES TO LT_FILES.
        CALL FUNCTION 'CVAPI_DOC_CHECKIN'
          EXPORTING
            PF_DOKAR           = LS_DRAW-DOKAR
            PF_DOKNR           = LF_DOCNUMBER
            PF_DOKVR           = LS_DRAW-DOKVR
            PF_DOKTL           = LS_DRAW-DOKTL
            PS_API_CONTROL     = LS_API_CONTROL
            PF_CONTENT_PROVIDE = 'TBL'
          IMPORTING
            PSX_MESSAGE        = LS_MESSAGE
          TABLES
            PT_FILES_X         = LT_FILES
            PT_CONTENT         = LT_DRAO.
        IF NOT LS_MESSAGE-MSG_TYPE CA 'EA' AND
               LF_DOCNUMBER IS NOT INITIAL.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
       ENDIF.
Regards,
Jack.

File Receiver adapter module Dynamic Configuration

Hi All
I have a adapter module in a receiver file adapter. In the code I try to access the file name through dynamic configuration,The file name gets set in the mapping.
String strFileName = msg.getMessageProperty(new MessagePropertyKey("FileName","http://sap.com/xi/XI/System/File"));
When my module get executed I get error: nested exception is: java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getMessageProperty(com.sap.engine.interfaces.messaging.api.MessagePropertyKey) of an object loaded from local variable 'msg'
Is it possible to get file name in receiver adapter? if so why does this error occur?

Yes it is possible...chk this
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
i guess u have added this import statement in ur code:
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
Code will be soemthing like this (FOR PI7.1)
MessagePropertyKey mpk = new MessagePropertyKey("FileName","http://sap.com/xi/XI/System/File");
String filename = msg.getMessageProperty(mpk);
Thanks
Amit

.OCB Files Through File Receiver Adapter

Similar Messages

Maybe you are looking for