OCI Error Codes on TAF failure
Hello,
I am trying to find out what errors OCI returns when TAF does not fully succeed. I have not found sufficient detail in the OCI documentation.
The two scenarios are:
1) TAF succeeds, but the in progress statement did not execute successfully (either it was something other than SELECT, or SELECT replay was not enabled).
2) TAF is unable to re-establish the connection (all candidate destinations are unavailable).
The application code needs to differentiate these two conditions. For (1), we want to roll back and then retry the request. For (2) we want stop the application.
We would prefer to do this without TAF callbacks.
Thanks...
Roger
Edited by: Roger Fischer on Feb 25, 2010 6:15 PM
If your requirement is to reconnect when any DB exception occures follow the steps
1) Clean up all the handles
2) Reconnect again with freed handles.
This way you dont have to mention the Error Codes
Regards
Prajith
Similar Messages
-
Ora (OCI) error codes for TAF failure
Hi,
I am working on project where in I have to support Transparent Application Failover (TAF) in GUI (using Java). From web (by googling) I found that this is automatically done by JDBC Thick (OCI) drivers.
I also found in some web site that there are lot of Ora Error Codes for various senarios like SELECT TAF failure(Ora 25401), or for DML command TAF failure(Ora 25402).
Is there any set/range of Ora(OCI) Error Code which is specifically for all TAF failure senario?
Thanks
Ram:-)
-
Hello,
i am trying to connect to my corporation VPN Server " ISA 2006" using windows 8.1 client built in VPN, but its returned the following error:
Event ID 20227: dialed a connection named "VPN connection Name" which has failed. The error code returned on failure is 789.
VPN connection is working fine with windows XP and windows 7 with no issue , this error is only appear when try to connect to using windows 8 client machine.
this error is shows only on windows 8.1 client , same procedures used to enroll the certificate from internal CA " IPsec Type" is followed .
below are the ISA server specifications:
VPN Server : ISA 2006.
windows Server version 2003.
appreciate your quick help and reply .
ThanksThanks for your reply.
i would like to add another point for this case, that when we are trying to enroll a certificate from internal CA web enrollment directly using windows 8 " internet explorer 11" , its install a certificate without Digital
Signature and non-repudiation in key usage property, then when try to connect , its will give the above error 789 ..
when try to enroll a certificate into windows 7 " internet explorer 10" and then export and import this certificate into windows 8.1 machine "with the name of
windows 8.1 machine" into windows 8.1 machine, the VPN is working normally and without issue.
The properties of the Certificate are difference between windows 7 machine and windows 8 machine is key usage missing the Digital Signature and non-repudiation properties when enroll
from windows 8.1 " internet explorer 11", this is in fact because of
we don't have an option for key usage " both" when subment a certificate on web enrollment page from windows 8 machine ,, the only option available is exchange "
no signature and both option available "
i believe that there is something wrong when using windows 8.1 internet explorer 11 so its gave a certificate with wrong key usage property .
appreciate your quick help in this .
thanks -
Windows 7 backup error code 0x81000019 (Backup Failure)
Running "backup" failed with error code 0x81000019.
After days of trouble shooting, I narrowed the problem to "com+ event system" service. It showed "started", I restarted it and backup worked. If I restart computer, I have to restart the service again for backup to work.
A "TEMPORARY" solution is a desktop batch file that contains the following lines: net stop /Y "COM+ Event system"
net start "COM+ Event System" exit
(Run this batch file before doing a backup.)
I have Windows 7 Ultimate (x64). I did a clean install which includes the system partition. No other problems, just this one.Hi BobK1110,
Thanks for the post!
What’s your error message when you got the error code 0x8100019? Please check this thread:
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/fce6950d-c06d-4dd0-a850-67022db4fe04
Do you have the same error message?
If so, this is a known issue, as a workaround, you can increase the system reserved partition size to 500MB.
Meanwhile, thanks for sharing your solution on this issue, it could be beneficial for other community members.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread. -
Event ID 1058 Error Code 1326 Logon Failure; unknown user name or bad password
I am attempting to apply a group policy to a group of computers and I will get this event ID and error code generated. I can unc to the gpt.ini file. What can I do to resolve this problem? My structure is like this: I have a 2003
R2 DC located at site A (and this computer WIN7 is also located at site A) and I also have other 2003 DC's located at remote offices (across WAN links). This computer seems to be wanting to apply the GPO from one of the remote office DC's as opposed
to the local DC that is much closer - how can I change how GPO is processed on this computer?I have two Domain Controllers Main ( Main DC Win 2012) and Second DC Win 2008.
the date of some policies is not out of date....
please check these files to know the problem.
dcdiag.txt output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine ASMDC, is a Directory Server.
Home Server = ASMDC
* Connecting to directory service on server ASMDC.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 2 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ASMDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... ASMDC passed test Connectivity
Testing server: Default-First-Site-Name\BSMDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... BSMDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ASMDC
Starting test: Advertising
The DC ASMDC is advertising itself as a DC and having a DS.
The DC ASMDC is advertising as an LDAP server
The DC ASMDC is advertising as having a writeable directory
The DC ASMDC is advertising as a Key Distribution Center
The DC ASMDC is advertising as a time server
The DS ASMDC is advertising as a GC.
......................... ASMDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... ASMDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... ASMDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... ASMDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... ASMDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
......................... ASMDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC ASMDC on DC ASMDC.
* SPN found :LDAP/ASMDC.buc.edu/buc.edu
* SPN found :LDAP/ASMDC.buc.edu
* SPN found :LDAP/ASMDC
* SPN found :LDAP/ASMDC.buc.edu/BUC
* SPN found :LDAP/5e88f85b-15a6-4ff5-b0fd-6df748df06fd._msdcs.buc.edu
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e88f85b-15a6-4ff5-b0fd-6df748df06fd/buc.edu
* SPN found :HOST/ASMDC.buc.edu/buc.edu
* SPN found :HOST/ASMDC.buc.edu
* SPN found :HOST/ASMDC
* SPN found :HOST/ASMDC.buc.edu/BUC
* SPN found :GC/ASMDC.buc.edu/buc.edu
......................... ASMDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC ASMDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=buc,DC=edu
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=buc,DC=edu
(Configuration,Version 3)
* Security Permissions Check for
DC=buc,DC=edu
(Domain,Version 3)
......................... ASMDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\ASMDC\netlogon
Verified share \\ASMDC\sysvol
......................... ASMDC passed test NetLogons
Starting test: ObjectsReplicated
ASMDC is in domain DC=buc,DC=edu
Checking for CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
......................... ASMDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=DomainDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Schema,CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
......................... ASMDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 8604 to 1073741823
* ASMDC.buc.edu is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 7604 to 8103
* rIDPreviousAllocationPool is 7604 to 8103
* rIDNextRID: 7640
......................... ASMDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... ASMDC passed test Services
Starting test: SystemLog
* The System Event log test
An Warning Event occurred. EventID: 0x825A0024
Time Generated: 08/21/2014 00:22:16
Event String:
The time service has not synchronized the system time for 86400 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system
time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients. The time service will continue to retry and sync time with its time sources.
Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization.
An Warning Event occurred. EventID: 0x8000000E
Time Generated: 08/21/2014 00:32:29
Event String:
There were password errors using the Credential Manager. To remedy, launch the Stored User Names and Passwords control panel applet, and reenter the password for the credential BUC.EDU\administrator.
An Error Event occurred. EventID: 0x00000422
Time Generated: 08/21/2014 00:32:29
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\buc.edu\sysvol\buc.edu\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not
successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... ASMDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
The system object reference (serverReferenceBL)
CN=ASMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
and backlink on
CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
......................... ASMDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Testing server: Default-First-Site-Name\BSMDC
Starting test: Advertising
The DC BSMDC is advertising itself as a DC and having a DS.
The DC BSMDC is advertising as an LDAP server
The DC BSMDC is advertising as having a writeable directory
The DC BSMDC is advertising as a Key Distribution Center
The DC BSMDC is advertising as a time server
The DS BSMDC is advertising as a GC.
......................... BSMDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... BSMDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... BSMDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BSMDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... BSMDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
......................... BSMDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC BSMDC on DC BSMDC.
* SPN found :LDAP/BSMDC.buc.edu/buc.edu
* SPN found :LDAP/BSMDC.buc.edu
* SPN found :LDAP/BSMDC
* SPN found :LDAP/BSMDC.buc.edu/BUC
* SPN found :LDAP/93561cab-4fb3-421f-9a67-af6b4c280eca._msdcs.buc.edu
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/93561cab-4fb3-421f-9a67-af6b4c280eca/buc.edu
* SPN found :HOST/BSMDC.buc.edu/buc.edu
* SPN found :HOST/BSMDC.buc.edu
* SPN found :HOST/BSMDC
* SPN found :HOST/BSMDC.buc.edu/BUC
* SPN found :GC/BSMDC.buc.edu/buc.edu
......................... BSMDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC BSMDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=buc,DC=edu
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=buc,DC=edu
(Configuration,Version 3)
* Security Permissions Check for
DC=buc,DC=edu
(Domain,Version 3)
......................... BSMDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\BSMDC\netlogon
Verified share \\BSMDC\sysvol
......................... BSMDC passed test NetLogons
Starting test: ObjectsReplicated
BSMDC is in domain DC=buc,DC=edu
Checking for CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
......................... BSMDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=DomainDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Schema,CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
......................... BSMDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 8604 to 1073741823
* ASMDC.buc.edu is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 8104 to 8603
* rIDPreviousAllocationPool is 8104 to 8603
* rIDNextRID: 8106
......................... BSMDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BSMDC passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:15
Event String:
Driver Send To Microsoft OneNote Driver required for printer Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:18
Event String:
Driver SolidPDF XChange required for printer SolidPDF XChange is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:18
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!net_pc5!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:19
Event String:
Driver Send To Microsoft OneNote Driver required for printer !!BUCLAPTOP1!Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:20
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An Warning Event occurred. EventID: 0x80000008
Time Generated: 08/20/2014 23:52:20
Event String:
The jobs in the print queue for printer Microsoft XPS Document Writer (redirected 2) were deleted. No user action is required.
To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
Advanced tab, and then clear the Log spooler warning events check box.
An Warning Event occurred. EventID: 0x80000004
Time Generated: 08/20/2014 23:52:20
Event String:
Printer Microsoft XPS Document Writer (redirected 2) will be deleted. No user action is required.
To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
Advanced tab, and then clear the Log spooler warning events check box.
An Warning Event occurred. EventID: 0x80000003
Time Generated: 08/20/2014 23:52:20
Event String:
Printer Microsoft XPS Document Writer (redirected 2) was deleted, and users will no longer be able to print to this printer. No user action is required.
To stop logging information events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click
the Advanced tab, and then clear the Log spooler information events check box.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:22
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 (Copy 1) is unknown. Contact the administrator to install the driver before you log in again.
......................... BSMDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
The system object reference (serverReferenceBL)
CN=BSMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
and backlink on
CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
......................... BSMDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : buc
Starting test: CheckSDRefDom
......................... buc passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... buc passed test CrossRefValidation
Running enterprise tests on : buc.edu
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
PDC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
Time Server Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
KDC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
......................... buc.edu passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... buc.edu passed test Intersite
====================================================================
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\ASMDC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 5e88f85b-15a6-4ff5-b0fd-6df748df06fd
DSA invocationID: 1355f657-cd24-4ad4-b890-f04f5c624acd
==== INBOUND NEIGHBORS ======================================
DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:43:56 was successful.
CN=Configuration,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:41:11 was successful.
CN=Schema,CN=Configuration,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-20 23:51:37 was successful.
DC=DomainDnsZones,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:45:39 was successful.
DC=ForestDnsZones,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-20 23:51:37 was successful.
Regards and thanks in advance
Mhiar -
Dbms_Scheduler - finding out Oracle error codes / messages for failures
Hi,
I am using Oracle OLAP to schedule a refresh of cube data in the background and this is using the dbms_scheduler functionality, now I need to find out when and why a refresh job fails. I have found the dba_scheduler_job_log which tells me if it failed but I can't find anywhere why ?? Are the failure reasons logged anywhere ??
Thanks in Advance,
BrandonPUBLIC.DBA_SCHEDULER_JOB_RUN_DETAILS [SYNONYM]
SYS.DBA_SCHEDULER_JOB_RUN_DETAILS [VIEW]
The details of a job run
Column Name NN? Datatype Comment
LOG_ID NUMBER The unique id of the log entry. Foreign key on entry in
LOG_DATE TIMESTAMP(6) WITH TIME ZONE The date of the log entry
OWNER VARCHAR2(30) The owner of the scheduler job
JOB_NAME VARCHAR2(65) The name of the scheduler job
JOB_SUBNAME VARCHAR2(65) The subname of the scheduler job (for a chain step job)
STATUS VARCHAR2(30) The status of the job run
ERROR# NUMBER The error number in the case of error
REQ_START_DATE TIMESTAMP(6) WITH TIME ZONE The requested start date of the job run
ACTUAL_START_DATE TIMESTAMP(6) WITH TIME ZONE The actual date the job ran
RUN_DURATION INTERVAL DAY(3) TO SECOND(0) The duration that the job ran
INSTANCE_ID NUMBER The id of the instance on which the job ran
SESSION_ID VARCHAR2(30) The session id of the job run
SLAVE_PID VARCHAR2(30) The process id of the slave on which the job ran
CPU_USED INTERVAL DAY(3) TO SECOND(2) The amount of cpu used for this job run
ADDITIONAL_INFO VARCHAR2(4000) Additional information on the job run, if applicable -
Where can I get a list of Labview fieldpoint error codes?
I'm programming my application and want to act on some error codes such as failure to communicate but ignore others like some values out of range.
Assuming that you did a default installation, you can click Start-->Programs-->National Instruments-->FieldPoint 3.0-->FieldPoint Help. There is a category called Errors and Warning Codes. Under that category is two subcategories; FieldPoint Specific Error Codes and General Error codes. These two sub-categories should list most error codes that you will see.
Regards,
Aaron -
OCICollAppend(.) fails & OCICollSize(.) fails : OCI Error : 21500, 21560
Hi,
My aggregate member function output/OUT parameter is a nested table or collection : table_out1 :
table_out1 TABLE OF NTAB_TYPE
Name Null? Type
EMPNO NUMBER
SALARY NUMBER
TST CHAR(10)
TE CHAR(10)
And this table_out1 is not part/column of any database table.
I am just using this table_out1 instance : returnValue : as a empty collection initially and then I am appending elements or objects
of type : NTAB_TYPE into this collection and then outputting the results(the entire collection items) directly to the sql prompt
after the completion of the ODCIAggregateTerminate member function. I am creating the new Objects by iterating through a set p :
and then corresponding creating objects using : OCIObjectNew(...)
But my problem is the OCICollSize(..) fails and throws an error : ORA-21500 or ORA-21560 .....
If I still go further and execute the OCICollApend(..) then it fails at that moment and gives me the same ORA-21500 or ORA-21560.
It fails at the very first element or when I am trying to append for the first time as the collection is empty.
The elem & elemind of OCICollAppend() : respectively : tmp & tmp_ind in my function ODCIAggregateTerminate are not null as I can check
them in my code ..So may be I am suspecting that the collection being empty it is throwing the error : but since in my case the collection
is an OUT/Output parameter so it should successfully append but it is not happening so..
When I check the OCI Collection size of returnValue : table_out1 : the value is nested_table size : 134580616
member function ODCIAggregateTerminate(
self IN OUT MinDistanceImpl, returnValue OUT table_out1,
flags IN number)
return number
as language C
library custagg name "ODCIAggregateTerminate"
with context
parameters (
context,
self,
self INDICATOR STRUCT,
returnValue ,
returnValue INDICATOR,
flags,
flags INDICATOR ,
RETURN ),
typedef OCITable table_out1;
struct ntab_type
OCINumber empno;
OCINumber salary;
OCIString * tst;
OCIString * te;
typedef struct ntab_type ntab_type;
struct ntab_type_ind
OCIInd _atomic;
OCIInd empno;
OCIInd salary;
OCIInd tst;
OCIInd te;
typedef struct ntab_type_ind ntab_type_ind;
extern "C" OCINumber * ODCIAggregateTerminate(
OCIExtProcContext *context,
MinDistanceImpl * self,
MinDistanceImpl_ind * self_ind,
table_out1 * returnValue,
short * returnValue_ind,
OCINumber * flags,
short flags_ind)
......Some previous code goes here...................
ntab_type * tmp = (ntab_type *) 0;
ntab_type_ind * tmp_ind = (ntab_type_ind *) 0;
returnValue = (table_out1 *) 0; // Can comment this : as it does not make any difference
OCIType out_tdo = (OCIType )0;
set<Outdata*>::iterator it;
for (it = storedCtx->l.p.begin(); it != storedCtx->l.p.end(); it++) {
fprintf(pFile, " in term set is : salary : %d , s.end : %s", (*it)->salary, (*it)->iend);
fflush(pFile);
int sal = (*it)->salary;
char time = (char )malloc(10*sizeof(char) + 1);
strcpy(time,(*it)->iend);
static sword status = 0;
if(( status = OCITypeByName(handles.envhp, handles.errhp, handles.svchp, (const text *) "SYS", (ub4) strlen("SYS"),
(const text *) "NTAB_TYPE", (ub4) strlen("NTAB_TYPE"), (text *)0, (ub4) 0,
OCI_DURATION_SESSION, OCI_TYPEGET_ALL, &out_tdo)) != OCI_SUCCESS)
fprintf (pFile, "Ocitypename - Fail\n");
fflush(pFile);
checkerr(&handles, status);
if((status = OCIObjectNew(handles.envhp,handles.errhp,handles.svchp, OCI_TYPECODE_OBJECT, out_tdo, (dvoid *)0,
OCI_DURATION_SESSION, TRUE, (dvoid**)&tmp)) != OCI_SUCCESS)
fprintf (pFile, "OCIOBJECTNEW - Fail\n");
fflush(pFile);
checkerr(&handles, status);
OCINumberFromInt( handles.errhp,&sal,sizeof(int),OCI_NUMBER_SIGNED, &tmp->empno);
if (checkerr(&handles, OCINumberFromInt( handles.errhp,&sal,sizeof(int),OCI_NUMBER_SIGNED,&tmp->salary)))
int success = ODCI_SUCCESS;
OCINumberFromInt( handles.errhp,&success,sizeof(int),OCI_NUMBER_SIGNED,returned );
*returnValue_ind = OCI_IND_NULL;
return returned;
if (checkerr(&handles, OCIStringAssignText(handles.envhp,handles.errhp, (CONST text *) time, strlen(time), &tmp->tst)))
int success = ODCI_SUCCESS;
OCINumberFromInt( handles.errhp,&success,sizeof(int),OCI_NUMBER_SIGNED,returned );
*returnValue_ind = OCI_IND_NULL;
return returned;
if (checkerr(&handles, OCIStringAssignText(handles.envhp,handles.errhp, (CONST text *) time, (ub2)strlen(time), &tmp->te)))
int success = ODCI_SUCCESS;
OCINumberFromInt( handles.errhp,&success,sizeof(int),OCI_NUMBER_SIGNED,returned );
*returnValue_ind = OCI_IND_NULL;
return returned;
char * ctst1 = (char *)OCIStringPtr(handles.envhp, tmp->tst);
char * cte1 = (char *)OCIStringPtr(handles.envhp, tmp->te);
fprintf(pFile, "from ctst1 & cte1 values");
tmp->tst : %s | tmp->te : %s | \n", ctst1, cte1);
fflush (pFile);
if(tmp_ind==OCI_IND_NOTNULL)
fprintf(pFile, " Oci tmp_ind not null...\n");
fflush(pFile);
else {
fprintf(pFile, " After OCI tmp_ind is NULL ...\n");
fflush(pFile);
sb4 sz;
if((status = OCICollSize(handles.envhp, handles.errhp,(CONST OCIColl *) returnValue, &sz)) != OCI_SUCCESS)
fprintf (pFile, "nested_table size error : %d\n", (int)sz);
fflush(pFile);
checkerr(&handles, status);
else {
fprintf (pFile, "nested_table_returnValue_size : %d\n", (int)sz);
fflush(pFile);
if (( status = OCICollAppend(hand*les.envhp, handles.errhp, (CONST dvoid *)tmp, (CONST dvoid *)tmp_ind, (OCIColl *)returnValue))
!= OCI_SUCCESS)
fprintf (pFile, "OCICollAppend - Fail\n");
fflush(pFile);
checkerr(&handles, status);
writing some status info of the program to the file : ( I deleted few printf statements in the above code..)
In ODCIAggregateTerminate Function!
in term set is : salary : 99 , s.end : 1999-10-10 sal value is : 99 After initializing sal is : 99 , time : 1999-10-10
******************Ocitypename - successfully done ***********************
**************before tmp_ind---> oci-ind-null ***********************
***************after tmp_ind---> oci-ind-null ***********************
OCIObjectNew created successfully
Before OCI Number conversion :
Before OCIstringassign text convs...terminate para....
After oci string assign text for tmp.tst...
After oci string assign text for tmp.tst...
After oci string assign text for tmp.te...
from ctst1 & cte1 values-----
tmp->tst : 1999-10-10 | tmp->te : 1999-10-10 |
Oci tmp_ind not null...
nested_table size error : 134580616
****************************In checkerr module *********************************************!
OCI error code 21500
****************************closing of checkerr module *********************************************!Hey,
Now I am able to append or add elements to the collection(OCITAble *). And it does not throw any error but the collection size is zero and collection is empty even after issuing OCICollAppend(...) .
I don't understand why is it happening so. I tried looking for almost 2-3 days and could not figure out what was happening....
Can any one suggest me some thing what is going on ... ... -
Hi,
Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'.
Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
is not a possible owner of the resource.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
BUTTONS:
OK
I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
application SQL Server SG1DB. Could not move the resource to available storage. An error occured
while moving the resource BCK_SG1DB to the clustered service or application Available Storage
Any ideas why it failed or how could I delete the SQL server instance from Clauster?
ThxHello,
Please read the following resource.
https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
MS SQL Express 2008 Installation Failure (Facility Code/Error Code : 1203/-2068643839)
I am performing silent installation for a named instance of SQL Server 2008 Express edition on a Windows 7 machine. The installation fails with Exit Facility Code
1203 and Error Code -2068643839.
PFB the details:
Operating System : Windows 7 Professional edition Service Pack 1
System Type : 64-Bit Operating System
SQL Express Installer : SQL Server 2008 Express Installer 32-bit (compatible with 64-bit OS)
I browsed through the MSDN and other forums. The root cause of this issue has been stated as the Windows user is not an administrator or windows user does not have the rights to modify the Microsoft SQL Server folder inside the Program Files folder. I have
checked for this common issues and the windows user is an administrator and has the sufficient rights to modify the
C:\Program Files(x86)\Microsoft SQL Server folder.
Appreciate if anyone can provide pointers to resolve this issue.
PFB the contents of Summary.txt file:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-01-28 15:59:43
End time: 2014-01-28 16:01:03
Requested action: Install
Log with failure: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\sql_engine_core_inst_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22
Machine Properties:
Machine name: ********
Machine processor count: 4
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\ConfigurationFile.ini
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: DHLEASYSHIP
INSTANCENAME: DHLEASYSHIP
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\
NPENABLED: 1
PID: *****
QUIET: True
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NT AUTHORITY\SYSTEM
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
X86: False
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0xB8A6B4FA
MSI log file location: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\sql_engine_core_inst_Cpu32_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\SystemConfigurationCheck_Report.htmPFB the details from sql_engine_core_inst_Cpu32_1.log file:
=== Verbose logging started: 1/28/2014 16:00:53 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Release\x86\setup100.exe ===
MSI (c) (D8:20) [16:00:53:535]: Resetting cached policy values
MSI (c) (D8:20) [16:00:53:535]: Machine policy value 'Debug' is 0
MSI (c) (D8:20) [16:00:53:535]: ******* RunEngine:
******* Product: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (c) (D8:20) [16:00:53:535]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (D8:20) [16:00:53:535]: Grabbed execution mutex.
MSI (c) (D8:20) [16:00:53:536]: Cloaking enabled.
MSI (c) (D8:20) [16:00:53:536]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (D8:20) [16:00:53:536]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (08:30) [16:00:53:538]: Running installation inside multi-package transaction C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
MSI (s) (08:30) [16:00:53:538]: Grabbed execution mutex.
MSI (s) (08:94) [16:00:53:539]: Resetting cached policy values
MSI (s) (08:94) [16:00:53:539]: Machine policy value 'Debug' is 0
MSI (s) (08:94) [16:00:53:539]: ******* RunEngine:
******* Product: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (s) (08:94) [16:00:53:539]: Machine policy value 'TransformsSecure' is 0
MSI (s) (08:94) [16:00:53:539]: User policy value 'TransformsAtSource' is 0
MSI (s) (08:94) [16:00:53:539]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (08:94) [16:00:53:539]: Specified instance {B5153233-9AEE-4CD4-9D2C-4FAAC870DBE2} via transform :InstID01.mst;:InstName01.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
MSI (s) (08:94) [16:00:53:539]: MainEngineThread is returning 1639
MSI (s) (08:30) [16:00:53:540]: User policy value 'DisableRollback' is 0
MSI (s) (08:30) [16:00:53:540]: Machine policy value 'DisableRollback' is 0
MSI (s) (08:30) [16:00:53:540]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (08:30) [16:00:53:540]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (08:30) [16:00:53:540]: Restoring environment variables
MSI (c) (D8:20) [16:00:53:541]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (D8:20) [16:00:53:541]: MainEngineThread is returning 1639
=== Verbose logging stopped: 1/28/2014 16:00:53 === -
I use Imacros. I got this error NS_ERROR_UNEXPECTED: Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref], line 3 (Error code: -1001). I think it is because of this version of mozilla firefox 28.0. I read I should downgrade the version to 27, but I have read it is not safety. Will the problem will be resolve? if not I think I should take the risk...
hello abmporras, please report the issue to the developer's of the addon through the support channels listed at https://addons.mozilla.org/firefox/addon/imacros-for-firefox/. they should be able to address the issue better.
-
Upgrade failure, then restore failure, error code is 1604
IOS 5.01 upgrade to IOS 5.1 failure and can't restart, then restore failure and the error code is 1604
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
Native SQL - Runtime Error: DBIF_DSQL2_SQL_ERROR (OCI returned error code)
Hi,
I have sometimes a problem with a NATIVE SQL-Statement.
Runtime Error text:
Database error text........: "OCI returned error code -2."
Database error code........: "-2"
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "DBDS/NEW DSQL"
Sometimes it works and sometimes we have this error.
Can anyone help me on this error?
Best Regards
AndréHi !
also a my job that runs every day, gets the same error in the production system at least once a month ! and nobody could help me to find out why.
Regards
Graziano Cortese -
Itunes installation failure, error code 80070246
I was attempting to upgrade to the latest I tunes version, unfortunately the installation stops during the publishing product information stage. I am using Windows Vista, home edition 32 bit.
While searching the help topics I have tried uninstalling itunes, quicktime, apple software update, apple mobile device support, bonjour and would have uninstalled apple application support if it showed up.
After rebooting and attempting to reinstall (with another failure) I tried running Microsoft fix-it basic and advanced because I came across this fix in another article for this error code. Now not only can I not install Itunes, no updates show up in the history for Windows Update and when I run Windows Update it also fails with another error code 80080005.
After spending 2 days working on this I am worse off than I was when I started, does anyone have any suggestions for what I should do next?A quick search of the error code shows a VBScript error. Perhaps this could help:
http://www.appdeploy.com/msierrors/detail.asp?id=273 -
Install cs6 failure. Error code 213:19
Hi,
I can't get cs6 to install on my imac. Here's a detailed summary of what I've done:
About this iMac : OSX 10.9, Processor: 3.6 ghz intel core i5. 8gb ram 1333 mhz DDR3, GraphicsATI Radeon HD 5670 512 MB
Migrated software from old powerbook by way of Time Machine
Deactivated Adobe licenses on old powerbook.
Started PhotoShop on new computer and got error code 213:19
Chatted with Adobe 11/25 (unique ID is 331515498)
Unable to solve problem on chat, was told to restart and reinstall software.
Uninstalled cs6 software
Cleaned with Adobe cleaning tool
Reinstalled from installation disc.
Installation failed.
Restarted computer
Unistalled again
ran disc permission repair
Cleaned with Adobe cleaning tool
Tried to instal photoshop only
Installation failed
Summary report of failure:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF013, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 10 error(s), 0 warning(s)
----------- Payload: {4FFA83C0-007A-4DB3-955C-B5EEE73BEDAF} Adobe SwitchBoard 2.0 2.0.0.0 -----------
ERROR: DF013: Failed to delete plist path at /Library/LaunchDaemons/com.adobe.SwitchBoard.plist(Seq 20)
ERROR: DW063: ARKCmdFS.dylib:failed for command ServiceInstall - error: 7(Seq 20)
----------- Payload: {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Preferences/com.adobe.CSXS.3.plist" (Seq 43)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 43)
----------- Payload: {4482EF4A-376B-46DE-9B17-E377232328E0} PDF Settings CS6 11.0.0.0 -----------
ERROR: DF026: Unable to set PDF Setting translation for name "MAGAZINE Ad 2006 JPN" in language "ENU" to "MAGAZINE Ad 2006 (Japan)"(Seq 2)
ERROR: DW063: Command ARKWritePDFSettingEntryCommand failed.(Seq 2)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed
ERROR: DW050: - PDF Settings CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
(still get Error: 213:19 when I try app start-up)
Any help will be greatly appreciated :-)Hi alporter8,
Please try running the patch mentioned in the KB : http://helpx.adobe.com/acrobat/kb/error-213-19-licensing-acrobat.html
and check.
Maybe you are looking for
-
My ipod nano is not being recognized by any power source:(
My computer and power cord for electrical outlet is not causing any response from my ipod
-
Time capsule will not mount but stillhas wi-fi;apple sent a replacement that works fine. I have to send my old time capsule back to apple but I want to purge it for security reason (personal data). Will pushing the reset button while plugging it in
-
Bookmarks in an Interactive PDF
When I export a large book from CS6 to an interactive PDF, the bookmarks are jumbled. Many are missing the chapter heading so the levels within those chapters are thrown off and some chapter heading appear as a lower level at the end of the previous
-
Expired subscription paid on one PC, cannot open product on Mac - prompted, again, for payment
I paid my subscription on a PC but want to now use the product on my Mac but, although my account reflects settlement of payment, I am prompted (on the Mac) to settle the outstanding payment before I can use the product. Any suggestions as to why?
-
BEx query problem which based on infoset
Hi, BW experts, Now I created a infoset which connect one ODS and one infoObject, ODS structure: CIO_CO_Area, 0Company, K1, KF1, K2, KF2 ( KF1 and KF2 are data field to store numeric value) InfoObject is 0CO_Area (connect to ODS.CIO_CO_Are