OCS Portlet on Portal 10.1.4

During installation OCS 10.1.2 on OAS 10.1.2.0.2 (Portal 10.1.4 :( ):
Install OCS Infra on different DB (sid=ocs).
Installing OCS apps to ocs and during config Oracle Collaborative Portlets CA i get the error like
Invalid Portal Schema Version: 10.1.4.0.0
Supported Portal Schema Version(s) are: 9.0.2.6, 10.1.2, 9.0.4
Installer Exception
oracle.webdb.utils.PortalExceptionImpl: Invalid Portal Schema version
at oracle.portal.PortalException.<init>(Unknown Source)
at oracle.webdb.ohs.install.InstallException.<init>(InstallException.java:24)
at oracle.webdb.ohs.install.Installer.performInstallation(Installer.java:688)
at oracle.webdb.ohs.install.Installer.main(Installer.java:707)
i cant uninstall patch 10.1.4 and cant install OCS AS.
Help.
I'm realy don't want reinstall all: OAS Portal, OAS BPEL, OAS OCS
Help.
Thanks

Don't use the AS portal with OCS it's better and recommend by Oracle to user the portal that comes with OCS. The portal that comes with OCS is the full blown portal unlike the version that came with 9.0.4.x.
I think you would be better off uninstalling and starting over. It might be a little more work now but you'll be happy you did.

Similar Messages

Install of the OCS portlets on Weblogic Portal 8.1

is anybody who has installed the whole stack of Collaboration Suite on a Weblogic Portal v8.1?
if yes, had you encounter any problems? do you have some tips ? or documentations ?
do you keep the WebCache in front of the WLS ?
do you keep the HTTP Server in front of the WLS ?
Thanks you

As far as I know, OCS portlets are specific to Oracle Portal, therefore they can't work on other portals easily, if not at all.
2 solutions :
1) wait for ORacle to release JSR-168 compliant portlets (portable portlets ;-) )
2) develop you own portlets for BEA. OCS includes a whole bunch of web services that you can easily call from a java portlet, and you can use LDAP indentification on OID or even integrate into SSO, as an external application (quite easy also), or as a partner application (more difficult but better integration).

Uses report portlet in Portal

Hi all,
When I run my report portlet in Portal It show error: REP-52009: No such command ().
I searched in Report 9i Error message but it not contain this error. Can you help me?
Thanks so much!
Trung

hi
are you talking of oracle reports or portal reports.
regards
deepak

How to add the SSO Server Administration portlet to portal

hi
I want to use SSO Server Administration portlet ,but when i Navigator to the administer tab .in the portal suntab there is not SSO Server Administration .I want to know why? and how to add the SSO Server Administration portlet to portal.(note:the portal system havn't SSO Server Administration portlet ) .how could i can do it. help !~help!

thank you IPeters .this problem was solved. the way is: login the portal with orcladmin and the password is the Infru password. In the administrator sub i see the SSO Server Administration portlet .
thank you very much.

Is there a CM SDK portlet for Portal 10g Release 2 ?

I originally posted this under the content topic within the Oracle Portal forum and someone suggested that I post it here.
Has anyone found or developed a portlet that can be used to access content stored in a CM SDK repository? We have a substantial amount of content stored in a 9iFS repository that we propose to migrate to CM SDK. We would like to maintain and publish some of this content through Portal. There are several Oracle white papers that mention close integration between Portal and CM SDK but I have been unable to find any real implementation examples.
Thanks in advance - Niels
-- Suggestion by Christian Hauser ---
hi niels,
please post this question in the OCS forum since OCS are providing the portlets. from what i know there is 2 ways of integrating content from content services:
- use the omniportlet datasource for content services to publish content
- use the content services portlet that are provided by the OCS team
hope this helps.
regards,
christian

Hi Niels
Are you after a portlet for CM SDK, or for our new Oracle Content Services?
9iFS evolved in to CM SDK.
Content Services evolved (at least in concept) from Oracle Files which is built on the CM SDK.
What functionality are you expecting in the portlet?
Content Services ships with both an out-of-the-box portlet that shows "My Recent Files", and also allows one to configure folder navigation links to Content Services. The navigation links when clicked result in the portlet rendering the direct folder listing for the folder. When items in the folder listing are clicked, they ship the user off to the DAV server to open the sub-folder/document.
Content Services also supports OmniPortlet access which among a host of features allows one to dynamically configure a result listing from a search in content services. Parameters can be configured for the omni portlets and values submitted to it via the page url. A parameter form allows one to enter particular criteria (such as a filename pattern) that can be submitted to the portal page and then intercepted by omni portlet to apply to the search query.
Matt.

JDeveloper 10.1.3.2 , Portlet + Liferay Portal problem with JSR168 portlet

When i create a portlet using JDeveloper 10.1.3.2 or 9.0 + portlet extension when i deploy it to Liferay Portal all versions and when i add the portlet somewhere the portal console prints me infinitive stacktrace... and the portlet never viewed
i think the problem is somewhere in the dispatching dont know ..
any ideas ?

Hi,
if you connet to OTN via a proy server, make sure this is configured in the JDeveloper preferences for browser and proxy settings. The username and password is your OTN account
Frank

Parsing a portlet in Portal

Hi all,
I have a requirement and we are trying to look for an approach that doesn't need development or at least not a huge development effort.
The scenario is the following. We have a portlet deployed in a JBoss server. This portlet is consumed by Webcenter Portal.
The portlet gives the following markup:
<div>form question</div>
<div>key</div>
Apart from that, there is an xml file sitting around as a static file. That xml contains relationships 1:1 with a key and a text.
When a user accesses the portal page with the portlet in it, it is desired that the key is substituted by its correspondent text value in the static xml file.
Is there any feature in webcenter that can parse a portal page and do that substitution?
Edited by: 944658 on 05-Jul-2012 08:12

Hi Thank you very much for responding to my problem.
i have set the log level to FINEST as you directed.but it doesn't show any information in log file "C:\Sun\JavaES5\portal\data\logs\admin\portal.admin.console.0.0.log" but it does't give any information.wen we are deplyoing war through psconsole
in Result step it is continueously showing the status bar it never says any information regarding sucess or failure.
after 30 minutes i clicked cancel but to close the wizard session.then it is diplaying the following exception.
[#|2008-03-26T09:14:00.765-0400|SEVERE|SJS Portal Server|debug.com.sun.portal.admin.console|ThreadID=18; ClassName=com.sun.portal.admin.console.common.PSBaseBean; MethodName=log; |Exception in DeployPortletBean.doDeploy()
java.io.InterruptedIOException: Waiting response timeout: 9223372036854775807
     at com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.sendWithReturn(ClientSynchroMessageConnectionImpl.java:260)
     at javax.management.remote.generic.ClientIntermediary.mBeanServerRequest(ClientIntermediary.java:975)
     at javax.management.remote.generic.ClientIntermediary.mBeanServerRequest(ClientIntermediary.java:957)
     at javax.management.remote.generic.ClientIntermediary.invoke(ClientIntermediary.java:478)
     at javax.management.remote.generic.GenericConnector$RemoteMBeanServerConnection.invoke(GenericConnector.java:522)
     at com.sun.portal.admin.console.util.PSConsoleMBeanServerConnectionWrapper.invoke(PSConsoleMBeanServerConnectionWrapper.java:241)
     at com.sun.portal.admin.console.desktop.DeployPortletBean.doDeploy(DeployPortletBean.java:668)
     at com.sun.portal.admin.console.desktop.DeployPortletBean$CreateThread.run(DeployPortletBean.java:1089)
please give a solution to me.
Thanks and Regards,
Siva

Integration of JSR-168 portlet into Portal - Complete Guide

Hi there,
the CE 7.1 is described to be compatible with JSR-168 portlets.
Our Company has developed a JSR-168 portlet which comes as a WAR-File
which can be easily included in other application server and portals (WebShpere, Apache).
But integration in SAP Netweaver fails - I am missing a complete documentation
which describes me the necessary steps to integrate a JSR-168 portlet application
into the SAP Application Server and also how to integrate the GUI into a View of the NW portal.
PLEASE HELP ME!!!
Things I tried - Things I failed:
- Imported a EAR-File into Developement Studio and tried to add it to Server
-> Message "EAR Project: ... should have the SAP specific facet in order EAR to be built."
- Deployement via "Deployement Tool" of Netweaver 2.0 (2004s) worked
and I was able to start app but no integration into NW portal view was possible
(Where is the deployement tool in NW 7.1 CE?!?!?)
- I wanted to create a PAR-File by a WAR-File but dont know how?
- I did not find any iView template which is for my portlet type.
Did anyone out there has the same probs or could help me....
Thanks on advance,
Andi-)
Edited by: Markus Sümmchen on Oct 6, 2008 1:47 PM

Hi Markus,
There is no complete guide for integration of JSR-168 portlets into a portal; however Diyan is correct.
In a nutshell, once you have deployed your portlet, you use GPAL technology in the SAP NetWeaver Portal of CE to create an iView wrapper in the PCD. All of this done by a portal content admin in the Portal Content Studio. Your deployed portet should be displayed in the "Portlets" repository within the Portal Catalog of the Portal Content Studio.
For conceptual and how-to documentation, refer to the following SAP Help Portal links:
- Generic Portal Application Layer (GPAL) Repositories: http://help.sap.com/saphelp_nwce10/helpdata/en/44/5e93dc35624ddee10000000a1553f7/frameset.htm
- Integrating Applications into the Portal: http://help.sap.com/saphelp_nwce10/helpdata/en/45/90e8bfaec26c4ee10000000a1553f7/frameset.htm
- Working with GPAL Repositories: http://help.sap.com/saphelp_nwce10/helpdata/en/44/5b96b37b6f4de1e10000000a1553f7/frameset.htm
Please let me know if this works for you.
Michael

Popping up Disco portlet in portal?

Hi folks.
This is a Discoverer portlet question for 9iAS. In short, it seems that you can't set a portlet to pop up. (I am not trying to pop up Disco Plus or the Viewer -- I am trying to pop up a portlet specifically. In the tar I've entered at Oracle support, it seems that this last point is hard to grasp.)
A nice feature of the 9iAS portal is that a portlet can have its attribute set so that instead of showing in a portal region, it displays in a new browser region.
The way you do this is:
1. Define and refresh the portlet as usual.
2. Go to graphical layout mode and click the pencil to change the attributes. Set the "Display Options" attribute to "Link that Displays Item in New Browser Window."
3. Now go to the Region attributes, click the Attributes/Style tab, and make sure that the attribute "Display Name or Image" is included in the Displayed Attributes.
4. Now return to your page view.
5. Click on the link for the worksheet.
6. You will see the portlet pop up, but it says: "Error: The portlet has not been defined."
This is of course wrong, because if you change the display back to "Item Displayed Directly in Page Area," it shows fine.
Other parameterized (i.e., customizable) portlets work fine: For instance, database portlets pop up just right.
Can someone verify this for me?
Note that this a portlet I'm trying to pop up. Popping up a Viewer page is not adequate, because I want to use the simple portlet customization features. Also, popping up a Plus session is not good either in our environment.
[Aside: Unless I am wrong, this is another example of Discoverer's inadequate integration with 9iAS portal. Among the other important issues are: You can't pass page parameters to a Disco portlet; the little drop-down arrow that is supposed to "minimize" the portlet doesn't work; data points aren't headed right in portlets or the viewer; Viewer URLs with MANY parameters don't work; I could go on and on.]

After some interchanges with Support, it turns out that this functionality does not exist due to architectural issues regarding the Discoverer/Portal integration. The problem has been logged as a bug. They guess: Maybe 9.0.5.

Reports in portlet region (Portal)

Hello!
I have a report that have a link to another report and is integrated to Portal, but when the second report is called it was displayed in all the page and i want that is displayed in the portlet region, what i have to do to display the second report in the portlet region over the first report?
mi call to 2nd report is this:
function F_DEPTNOFormatTrigger return boolean is
begin
SRW.SET_HYPERLINK('http://<host>:<port>/reports/rwservlet?prueba2&report=Prueba2&deptno='||:deptno );
return (TRUE);
end;
thanks a lot!

hello,
you did not specify which version of the application serve we are talking about. i assume 9.0.2, since you are describing an in-line rendering of the report content.
in 9.0.4 we moved to using iframes to do the portlet rendering (if your browser supports it) as iframes allow you in-line linking, meaning the called report will render inside the portlet. in 9.0.2 this is not possible.
thanks,
ph.

Error when add portlet into portal page

Dear all,
I use:
+ JDeveloper 10.1.3.4.0
+ Oracle Application Server 10g release 2.
+ JDK 1.4
I installed ADF_Installer and Portlet_Container for OC4J instance in Oracle Application Server ok.
1. I use JDeveloper, create my simple project with template is WebCenter Application.
2. In the Portlet project, I added the Portlet Faces Bridge.
3. I add the JSF (with name is home.jspx) in Web Tier into the Portlet project (select the JSF JSP). And type is .jspx and Do not automatically Expose UI Components in a Managed Bean.
4. Inside the home.jspx, I add the OutputText only.
5. Inside the WEB-INF, i created portlet.xml file with content is:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<portlet-app version="1.0"
xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd">
<portlet>
<portlet-name>MyTestPortlet</portlet-name>
<display-name>My Test Portlet</display-name>
<portlet-class>oracle.portlet.server.bridges.jsf.FacesPortlet</portlet-class>
<init-param>
<name>DefaultPage.view</name>
<value>/home.jspx</value>
</init-param>
<init-param>
<name>BridgeLifecycleListeners</name>
<value>
oracle.portlet.server.bridges.jsf.adf.ADFFacesBridgeLifecycleListener
</value>
</init-param>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<portlet-info>
<title>My Test Portlet</title>
<short-title>testportlet</short-title>
</portlet-info>
</portlet>
</portlet-app>
6. Inside the WEB-INF, i edited web.xml by added some contents (and inside this file, I removed line in web-app tag
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee"): --> If I did not remove it, I received some error !
<context-param>
<param-name>javax.faces.application.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml,/WEB-INF/portlet.xml</param-value>
</context-param>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>server</param-value>
</context-param>
7. I create the WAR File Deployment Profiles.
Ok, I deploy this portlet into OC4J instance in Oracle Application Server (10g release 2). -- > Finished.
From my browser, I use URL Address such as:
http://mymachine.com:7780/jobs/portlets?WSDL --> ok.
After that, I log into Oracle AS Portal, and register this provider with style WSRP --> ok, I can see it from Portlet Reposistory. But when I add it into my portal page, I receive following message
Error:Could not get markup. The cookie or session is invalid or there is a runtime exception.
I refresh my portal page but it not effect !
In Oracle Application Server 10g release 2 have support JSF Portlet ? Or I have some misstakes ? Please guide to me to solve this problem.

I updated Oracle Application Server Portal from 10.1.2 to 10.1.4 ! Please give me some ideas !

Portlet error (portal server 6.3)

I created a portlet, it is deployed using pdeploy, then I created a channel and put it under JSPTabcontainer using Access Manager. I keep getting this error in the portal server :
ERROR: ProviderCaller.run(): exception thrown from TestPortlet
com.sun.portal.desktop.context.ContextError: couldn't fetch content
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:180)
Thanks a lot.

To deploy the portlet, I put the .war file under sun/portalserver/tmp/portlet (the folder where portletsamples.war located), then run the pdeploy utility to deploy it and it was successful.
The thing puzzles me is, my portlet has couple of .jsp pages and some jar files that I referenced, I am assuming they shoud be installed somewhere under portalserver but I could not find anything by doing a search. Is this normal?
Thanks
Mike

Out.print written to portlet within portal w/out redirect

I am trying to write output to only just the portlet portion of the portal
without having to do a redirect. What am I missing? The following is my
portlet JSP:

<%@ page extends="com.beasys.commerce.portal.admin.PortalJspBase"%>
<%@page import ="java.lang.String" %>
<%@page import ="java.util.*" %>
<%@page import ="java.net.*" %>
<%@page import ="java.io.*" %>
<%
try {
StringBuffer sb = new
StringBuffer("http://localhost:8080/servlet/com.clickaction.erm.events.Event
Servlet?test=test");
for(Enumeration e = request.getParameterNames(); e.hasMoreElements(); ){
String parameterName = (String)e.nextElement();
sb.append("&" + java.net.URLEncoder.encode(parameterName) + "=" +
java.net.URLEncoder.encode(request.getParameter(parameterName)));
String
host="http://localhost:8080/servlet/com.clickaction.erm.events.EventServlet?
com.clickaction.erm.events.EventHandler.EVENT.0=com.clickaction.erm.events.T
ransformerEvent&com.clickaction.erm.events.TransformerEvent.FILE=xml/surveys
/surveyresponsetransforms.xml&clientID=llbean&userID=abcd";
URL servletURL = new URL(sb.toString());
URLConnection con = servletURL.openConnection();
con.setDoInput(true);
con.setUseCaches(false);
con.setRequestProperty("Content-Type", "text/html");
InputStream in = con.getInputStream();
BufferedReader serverStream = new BufferedReader(new InputStreamReader(in));
String receiveString;
while((receiveString = serverStream.readLine()) != null){
out.print(receiveString);
in.close();
} catch (Exception e){
System.out.println("The connection is dead");
response.sendRedirect("http://localhost:7601/mybuybeans");
%>

Why can't you do
class Destination
private static Destination d = new Destination();
public static Destination getDestination()
return d;
private Destination()
public void otherMethods()
Now your go between just calls.
Destination.getDestination().otherMethods();

Problem with struts portlet in Portal

Hi,
I would like to make a struts app as a portlet in bea portal.
But when I try to make it using standard wizard to create Struts portlet
after point struts-config.xml I get "Cannot parse the struts configuration file".
What is wrong ? (I tried with many different struts-config.xml files, it doesn't
work)
I can't find any error details. in workshop files ?
I have bea Workshop 8.1.
Any help ?
Thanks,
Tom

Ok I found solution on
weblogic.developer.interest.portal.struts
but where are error details ? which file ?
"tmm" <[email protected]> wrote:
>
Hi,
I would like to make a struts app as a portlet in bea portal.
But when I try to make it using standard wizard to create Struts portlet
after point struts-config.xml I get "Cannot parse the struts configuration
file".
What is wrong ? (I tried with many different struts-config.xml files,
it doesn't
work)
I can't find any error details. in workshop files ?
I have bea Workshop 8.1.
Any help ?
Thanks,
Tom

DATABASE OBJECTS PORTLET OF PORTAL

I have posted this question earlier and i have not received an answer for it. so i am posting this question again.
i want to customize the database objects portlet say like i want to remove the find option. how can this be done?

It is not possible. The navigator portlets are pre-designed and built into portal with the find utility. It is ofcourse possible to customize the portal-provided navigator page but not to this level of removing the find options itself.

OCS Portlet on Portal 10.1.4

Similar Messages

Maybe you are looking for