OData - Stop sending bad requests
Hi experts,
i'm facing some issues in my application when sending a bad request or using an non implemented feature ( e.g trying to create a entity using oData without specifying a key, action which fails ).
Each time I am sending a well-formed request of the same type ( POST for POST , etc ), the "bad request" seems to be sent again.
I wonder if there is a way to destroy bad requests or prevent them to be sent again.
Thanks for your help,
Best regards,
Marc
Call the support number. Ask for the billing department. Explain the situation. Ask for a return box or the nearest location where you can return it. Return the box. Be sure to get a receipt. Once the box is returned, you should get no more bills. It is your responsibility to return the box.
When you call support, be polite and explain your problem.
Stay on it until you get results.
P.S. Threats never work!!!!
Similar Messages
-
BC Sender Adapter--400 Bad Request
Hi,
I am trying to integrate BC with XI(BC Sender Adapter). BC will send Data to XI.
In BC, i have specified a routing rule( as specified in help.sap.com) using the following parameters :
URL:http://<hostname:portnumber>/MessagingSystem/receive/BcAdapter/BC
User:xiappluser
When i test this service, it gives the error 400 Bad Request. I tested the validitly of the above URL by loggin in through a web-browser. The messaging servlet is seen in active status.
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Even when i test the URL http://<hostname>:50000 from BC,the response code is 200(success). But the problem is when i try to post the request to messaging servlet (400 bad request).
Can some body suggest me how to go about.
Regards,
Siva Maranani.hi,
I was able to get the error details of "400:Bad Request."
The error is :
com.sap.aii.af.ra.ms.api.MessageFormatException: got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
org.xml.sax.SAXexception:got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
Below is the xmldata, that i am sent to XI:
<?xml version="1.0" encoding="iso-8859-1"?>
<sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
<sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
<saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC</saptr:From>
<saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">XI</saptr:To>
</sap:Header>
<sap:Body>
<rfc:ZSIVAINSERT xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<CARRID>AA<CARRID>
<CONNID>0017<CONNID/>
<FLDATE>20040417<FLDATE/>
</rfc:ZSIVAINSERT>
</sap:Body>
</sap:Envelope>
I do not understand the name/namespace it is looking for. Kindly help me out.
Regards,
Siva Maranani -
XI's BC Adater (sender)-- 400 Bad Request
Hi,
I am trying to send data from SAP-BC to XI. XI will receive this data through XI's-BC Adapter(sender).
I have defined a routing rule in BC as specified in help.sap.com.
http://<hostname:50000/MessagingSystem/receive/BcAdapter/BC
When i test this Flowservice from BC End, i get 400 Bad Request error.
But when i specify the URL as http://hostname:50000 and test the service, the response code is 200 (success).
I even tested the URL directly posting in a explorer page and i could see that the message servlet pertaining to BC is active.
I am not able to understand why is XI-server not able to receive the request that has been posted to the URL
http://<hostname:50000/MessagingSystem/receive/BcAdapter/BC
Am i missing any configurations??
Regards,
siva Marananihi,
I was able to get the error details of "400:Bad Request."
The error is :
com.sap.aii.af.ra.ms.api.MessageFormatException: got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
org.xml.sax.SAXexception:got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
Below is the xmldata, that i am sent to XI:
<?xml version="1.0" encoding="iso-8859-1"?>
<sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
<sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
<saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC</saptr:From>
<saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">XI</saptr:To>
</sap:Header>
<sap:Body>
<rfc:ZSIVAINSERT xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<CARRID>AA<CARRID>
<CONNID>0017<CONNID/>
<FLDATE>20040417<FLDATE/>
</rfc:ZSIVAINSERT>
</sap:Body>
</sap:Envelope>
I do not understand the name/namespace it is looking for. Kindly help me out.
Regards,
Siva Maranani -
How to stop iCloud from sending meeting requests
I have a situation where an iCloud Calendar has been set up with many meetings with attendees for a business (appointments for a hair salon). We created these "meetings" by dragging people from Contacts into Calendar, thinking this was a good way to have their contact info handy.
I don't want to send people updates or requests or invites or anything - it is confusing everyone and there are some 100 meetings that were set up and if I delete the attendee to just try to turn this into a "local" meeting for strictly my reference, they are getting a message that the meeting has been canceled.
Bah!
Is there a way to just stop sending these messages?
If I just delete the calendar that has all these meetings, will iCloud send out 100 emails telling everyone that those meetings are cancelled?
Thanks for any help here....
-- DonI have tha same Problem.
I share my calender with my wife and obosolite. Allways when i change a entry in my calender my wife recive a ivation. Also on the Mac Book in ical.
All settings are on Off for sending any change.
the same was ones again wit me.com. the apple made a update and everithing was ok. -
I get this message:
Bad Request
Your browser sent a request that this server could not understand.Not sure from your example but it appears that the address doesn't have a full domain, i.e., the part between http:// and the next / is not a valid internet domain name, e.g.,
http://sometext-webproxy/
In that case, it's probably something running on your computer, either as part of your security software, or as a Firefox add-on, or malware.
A standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If you can access sites normally, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can try here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change? -
TT14000: TimesTen daemon internal error: Could not send 'manage' request
Hi
I have got error like TimesTen daemon internal error: Could not send 'manage' request .Can any one help, why this error is came and what is solution for this.
I have restarted the Timesten Daemon now its working fine.But why i got that error?
Below is the tterror log :
12:50:27.53 Err : : 31518: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc 400 err1 703 err2 836
12:50:28.52 Warn: : 31518: 31522 ------------------: subdaemon process exited
14:04:21.95 Warn: : 31518: 31619/0xcce7500: Recovery started
14:04:23.01 Warn: : 31619: subd: Warning identified in [sub.c: line 2152]
14:04:23.01 Warn: : 31619: subd: (Warning 20100): TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
14:04:23.01 Warn: : 31619: -- file "db.c", lineno 12011, procedure "sbDbConnect"
14:04:23.01 Warn: : 31619: subd: connect trouble, rc 2, reason 20100
14:04:23.01 Warn: : 31619: Warn 20100: TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
20:23:57.74 Warn: : 31518: 9216 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
21:15:17.79 Warn: : 31518: 22608 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
09:22:11.63 Warn: : 31518: 32431 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=21
09:28:03.52 Warn: : 31518: 32417 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
20:26:56.30 Warn: : 31518: 1165 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
20:40:31.73 Warn: : 31518: 21549 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=3
23:17:52.64 Warn: : 31518: 29899 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=20 '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=215
09:42:29.96 Warn: : 31518: 22044 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=10
13:12:19.91 Warn: : 31518: 16923 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=10
19:42:46.21 Warn: : 31518: 10794 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=10
00:00:06.83 Warn: : 6786: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 34 users
00:00:06.83 Warn: : 6786: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
00:00:06.83 Warn: : 6786: WARNING: data store no longer considered in use
00:00:06.84 Warn: : 6786: WARNING: PL/SQL shared segment existed at time of daemon termination
00:00:06.84 Err : : 6786: TT14000: TimesTen daemon internal error: Could not destroy PL/SQL shared memory, error
00:00:06.84 Warn: : 6786: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
00:00:15.32 Warn: : 6786: 6792/0x1edfc500: Recovery started
00:00:16.39 Warn: : 6792: subd: Warning identified in [sub.c: line 2152]
00:00:16.39 Warn: : 6792: subd: (Warning 20100): TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
00:00:16.39 Warn: : 6792: -- file "db.c", lineno 12011, procedure "sbDbConnect"
00:00:16.39 Warn: : 6792: subd: connect trouble, rc 2, reason 20100
00:00:16.39 Warn: : 6792: Warn 20100: TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
17:51:04.03 Warn: : 6786: 17730 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1225031686 count=10
10:03:44.61 Warn: REP: 7064: TT_TT70_32:receiver.c(7921): TT16191: Replacing old table definition (OASTT.USER_AUTH) with the one received from peer (TT_TT70_32_MASTER)
10:03:52.28 Warn: REP: 7064: TT_TT70_32:receiver.c(7921): TT16191: Replacing old table definition (OASTT.USER_AUTH) with the one received from peer (TT_TT70_32_MASTER)
10:04:02.73 Warn: REP: 7064: TT_TT70_32:receiver.c(7921): TT16191: Replacing old table definition (OASTT.USER_AUTH) with the one received from peer (TT_TT70_32_MASTER)
17:58:15.58 Warn: : 6786: 15156 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1225031686 count=7
18:02:14.24 Warn: REP: 7064: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
18:02:25.07 Warn: REP: 7064: got termination signal, stopping
18:02:25.81 Warn: : 6790: got termination signal, stopping
18:02:25.86 Warn: : 6792: got termination signal, stopping
18:02:25.87 Err : : 6786: TT14006: TimesTen daemon disconnect failed: 6792/0x2aaab80008c0: disconnect complete: Disconnect not started. Info: 0 7064 0x1f758520 (/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32)
18:02:25.87 Err : : 6792: TT14000: TimesTen daemon internal error: subd: Monitor thread failed to disconnect, tt error 798 (TT0798: Daemon reports error 0 -- file "db.c", lineno 16124, procedure "sbDbDisconnect").
18:02:25.87 Warn: : 6786: got termination signal, stopping
18:02:25.91 Warn: : 6789: got termination signal, stopping
18:02:25.95 Warn: : 6791: got termination signal, stopping
18:02:26.05 Err : : 6786: TT14000: TimesTen daemon internal error: Could not connect to subdaemon port 43791
18:02:26.05 Err : : 6786: TT14006: TimesTen daemon disconnect failed: error -1 in stopManaging
18:02:26.05 Err : REP: 7064: TT_TT70_32:repagent.c(3338): TT16005: Failed to disconnect from datastore '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' for 'REPHOLD' thread
18:02:26.05 Err : REP: 7064: TT_TT70_32:repagent.c(3338): TT791: TT0791: Cannot communicate with subdaemon -- file "db.c", lineno 16124, procedure "sbDbDisconnect"
18:02:26.05 Warn: : 6786: 6792 ------------------: subdaemon process exited
18:02:26.05 Warn: : 6786: 6792 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1225031686 count=10
18:02:26.05 Warn: : 6786: daRecovery: subdaemon 6792, managing data store, failed: invalidate (failcode=202)
18:02:26.05 Warn: : 6786: Invalidating the data store (failcode 202, recovery for 6792)
18:02:26.11 Err : : 6786: Could not connect to subdaemon 6794, port 56784
18:02:26.28 Warn: : 6786: 6789 ------------------: subdaemon process exited
18:02:26.53 Warn: : 6786: 6791 ------------------: subdaemon process exited
18:02:26.59 Warn: : 6786: 6790 ------------------: subdaemon process exited
18:02:26.71 Err : : 6786: Could not connect to subdaemon 7064, port 45797
13:42:14.95 Warn: : 10502: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
13:42:32.63 Err : : 10502: TT14000: TimesTen daemon internal error: Error 22 creating shared segment, KEY 0x4e048006
13:42:32.63 Err : : 10502: -- OS reports invalid shared segment size
13:42:32.63 Err : : 10502: -- Confirm that SHMMAX kernel parameter is set > datastore size
13:42:32.63 Err : : 10508: subd: Error identified in [sub.c: line 2152]
13:42:32.63 Err : : 10508: subd: (Error 836): TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 9572, procedure "sbDbConnect"
13:42:32.63 Err : : 10508: -- file "db.c", lineno 9572, procedure "sbDbConnect"
13:42:32.63 Warn: : 10508: subd: connect trouble, rc 1, reason 836
13:42:32.63 Err : : 10508: Err 836: TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 9572, procedure "sbDbConnect"
13:42:32.63 Err : : 10502: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc 400 err1 703 err2 836
13:42:33.63 Warn: : 10502: 10508 ------------------: subdaemon process exited
13:46:59.96 Warn: : 10502: 10605/0x819500: Recovery started
13:47:01.02 Warn: : 10605: subd: Warning identified in [sub.c: line 2152]
13:47:01.02 Warn: : 10605: subd: (Warning 20100): TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
13:47:01.02 Warn: : 10605: -- file "db.c", lineno 12011, procedure "sbDbConnect"
13:47:01.02 Warn: : 10605: subd: connect trouble, rc 2, reason 20100
13:47:01.02 Warn: : 10605: Warn 20100: TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
15:37:47.14 Warn: : 10502: 28930 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1392803846 count=1
19:41:05.92 Warn: : 10502: 28950 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=1
12:18:40.18 Warn: : 10502: 19264 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=16
19:09:15.13 Warn: : 10502: 29472 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=24
20:29:21.07 Warn: : 10502: 6896 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=27
11:11:30.98 Warn: REP: 18767: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
14:26:06.81 Warn: : 10502: 25502 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=3
10:52:42.36 Warn: : 10502: 6487 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=12
11:06:20.50 Warn: : 10502: 15322 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=1
13:19:36.58 Warn: REP: 18767: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
16:48:45.24 Warn: : 10506: got termination signal, stopping
16:48:45.48 Warn: : 10505: got termination signal, stopping
16:48:45.95 Warn: : 10502: 10505 ------------------: subdaemon process exited
16:48:45.95 Warn: : 10502: 10506 ------------------: subdaemon process exited
16:48:45.99 Warn: REP: 18767: got termination signal, stopping
16:48:46.20 Warn: : 10507: got termination signal, stopping
16:48:46.26 Warn: : 10502: got termination signal, stopping
16:48:46.86 Warn: : 10605: got termination signal, stopping
16:48:46.95 Warn: : 10502: 10507 ------------------: subdaemon process exited
16:48:46.99 Err : : 10502: TT14000: TimesTen daemon internal error: Could not connect to subdaemon port 36872
16:48:46.99 Err : : 10502: TT14006: TimesTen daemon disconnect failed: error -1 in stopManaging
16:48:46.99 Err : REP: 18767: TT_TT70_32:repagent.c(3338): TT16005: Failed to disconnect from datastore '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' for 'REPLISTENER' thread
16:48:46.99 Err : REP: 18767: TT_TT70_32:repagent.c(3338): TT791: TT0791: Cannot communicate with subdaemon -- file "db.c", lineno 16124, procedure "sbDbDisconnect"
16:48:46.99 Warn: : 10502: 10605 ------------------: subdaemon process exited
16:48:46.99 Warn: : 10502: 10605 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=10
16:48:46.99 Warn: : 10502: daRecovery: subdaemon 10605, managing data store, failed: invalidate (failcode=202)
16:48:46.99 Warn: : 10502: Invalidating the data store (failcode 202, recovery for 10605)
16:48:47.09 Err : : 10502: Could not connect to subdaemon 10510, port 58206
16:48:47.16 Err : : 10502: Could not connect to subdaemon 18767, port 49611
13:17:45.67 Warn: : 8602: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
13:17:52.84 Warn: : 8602: 8605/0x12207500: Recovery started
13:18:41.73 Err : : 8602: 8789/(nil): /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/snmp.ini: bad -trap_dest value SMARTS4: Host not found (authoritative answer)
13:31:31.49 Warn: : 8602: 5706 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=1
01:25:41.22 Warn: : 8602: 18419 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=158
10:29:11.03 Warn: : 8602: 30002 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=43
12:47:07.86 Warn: : 8602: Invalidating in-RAM shared data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because in use at exit
12:47:07.87 Warn: : 8602: 8605/0x123481a0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
12:47:07.88 Warn: : 8605: Stopping subdaemon Log Marker thread for /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because db is invalid.
12:47:07.88 Warn: : 8602: 8605/0x123a47b0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
12:47:07.96 Warn: : 8602: 8605/0x1243c900: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
12:47:08.88 Warn: : 8602: 8605 ------------------: subdaemon process exited
12:47:08.88 Warn: : 8602: 8605 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=10
12:47:34.78 Warn: : 20263: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 11 users
12:47:34.78 Warn: : 20263: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
12:47:34.78 Warn: : 20263: WARNING: data store no longer considered in use
12:47:34.78 Warn: : 20263: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
12:51:06.94 Warn: : 20263: 20266/0x14690500: Recovery started
16:29:00.34 Warn: : 20263: 22849 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 134512646 count=1
10:12:26.98 Warn: REP: 20784: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. TimesTen replication agent is stopping
10:12:30.91 Warn: : 20263: Invalidating in-RAM shared data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because in use at exit
10:12:30.91 Warn: : 20263: 20266/0x1479ff40: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:30.91 Warn: : 20266: Stopping subdaemon Log Marker thread for /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because db is invalid.
10:12:30.91 Warn: : 20263: 20266/0x1488b830: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:30.96 Warn: : 20263: 20266/0x1486fa40: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.03 Warn: : 20263: 20266/0x2aaac40008c0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.34 Warn: : 20263: 20266/0x2aaac401c6b0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.40 Warn: : 20263: 20266/0x2aaac00008c0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.66 Warn: : 20263: 20266/0x2aaac4078700: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.91 Warn: : 20263: 20266 ------------------: subdaemon process exited
10:12:31.91 Warn: : 20263: 20266 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 134512646 count=10
10:12:36.28 Warn: : 14678: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 11 users
10:12:36.28 Warn: : 14678: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
10:12:36.28 Warn: : 14678: WARNING: data store no longer considered in use
10:12:36.28 Warn: : 14678: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
10:13:25.52 Warn: : 14678: 14683/0x5121500: Recovery started
10:10:12.39 Warn: : 14678: 15486 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=1
10:06:55.19 Warn: : 14678: 30796 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=2
09:58:48.69 Warn: : 14678: 12930 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=2
15:27:42.39 Warn: : 14678: 7811 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=2
10:16:36.60 Warn: REP: 14964: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
10:53:27.24 Warn: : 14678: 11658 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=1
15:11:33.81 Warn: : 14678: got termination signal, stopping
15:11:34.63 Err : : 14678: Could not connect to subdaemon 14686, port 41664
15:11:34.72 Warn: : 14682: got termination signal, stopping
15:11:35.10 Warn: : 14681: got termination signal, stopping
15:11:35.11 Warn: : 14684: got termination signal, stopping
15:11:35.23 Warn: : 14683: got termination signal, stopping
15:11:35.35 Warn: : 14678: 14684 ------------------: subdaemon process exited
15:11:35.43 Warn: REP: 14964: got termination signal, stopping
15:11:35.53 Warn: : 14678: 14681 ------------------: subdaemon process exited
15:11:35.55 Warn: : 14678: 14682 ------------------: subdaemon process exited
15:11:36.29 Err : : 14678: TT14000: TimesTen daemon internal error: 14683: Error processing 'unmanage' in subdaemon rc -2
15:11:36.29 Err : : 14678: TT14000: TimesTen daemon internal error: Unparsable reply to unmanage
15:11:36.29 Err : : 14678: TT14006: TimesTen daemon disconnect failed: error -1 in stopManaging
15:11:36.29 Err : REP: 14964: TT_TT70_32:repagent.c(3338): TT16005: Failed to disconnect from datastore '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' for 'REPLISTENER' thread
15:11:36.29 Warn: : 14678: 14683 ------------------: subdaemon process exited
15:11:36.29 Err : REP: 14964: TT_TT70_32:repagent.c(3338): TT798: TT0798: Daemon reports error 0 -- file "db.c", lineno 16124, procedure "sbDbDisconnect"
15:11:36.30 Warn: : 14678: 14683 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=1
15:11:37.63 Warn: : 14678: Invalidating in-RAM shared data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because in use at exit
15:54:42.72 Warn: : 8962: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 1 users
15:54:42.73 Warn: : 8962: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
15:54:42.73 Warn: : 8962: WARNING: data store no longer considered in use
15:54:42.73 Warn: : 8962: WARNING: PL/SQL shared segment existed at time of daemon termination
15:54:42.73 Err : : 8962: TT14000: TimesTen daemon internal error: Could not destroy PL/SQL shared memory, error 22
15:54:42.73 Warn: : 8962: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
15:54:48.61 Warn: : 8962: 8973/0x17292500: Recovery started
16:15:24.25 Warn: : 8962: 5703 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 251953159 count=1
15:32:17.57 Warn: : 8962: 8974/0xff51500: Recovery started
15:32:55.78 Warn: REP: 28114: SIPT_TT_SUB4:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out1)
TimesTen Release 11.2.1.3.0 (64 bit Linux/x86_64) (TT_tt70_32:53388) 2009-08-21T05:34:23Z
Instance admin: timesten
Instance home directory: /opt/timesten/tt7032/TimesTen/TT_tt70_32
Group owner: timesten
Daemon home directory: /opt/timesten/tt7032/TimesTen/TT_tt70_32/info
PL/SQL enabled.
2)
[TT_1121]
Driver=/opt/timesten/tt7032/TimesTen/TT_tt70_32/lib/libtten.so
DataStore=/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_1121
DatabaseCharacterSet=US7ASCII
3)
kernel.shmmax = 2147483648
kernel.shmall = 2097152
4)
MemTotal: 8171576 kB
MemFree: 3754532 kB
Buffers: 312052 kB
Cached: 1656640 kB
SwapCached: 0 kB
Active: 3924072 kB
Inactive: 309660 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 8171576 kB
LowFree: 3754532 kB
SwapTotal: 8388600 kB
SwapFree: 8388600 kB
Dirty: 652 kB
Writeback: 4 kB
AnonPages: 2265060 kB
Mapped: 153924 kB
Slab: 126580 kB
PageTables: 12320 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 12474388 kB
Committed_AS: 4718116 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 284328 kB
VmallocChunk: 34359452663 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB -
Agentry HTTP-XML Step Bad Request Error
Hi,
I try to get data via HTTP-XML connection on Agentry.
1) I defined HTTPXML Sytem Connection then added Validate User Request for GET method with URL: http://www.thomas-bayer.com/sqlrest/PRODUCT/
I did not defined Request Argumanets because there is no need authentication when I ty this url on browser.
2) Then I added HTTP-XML step to steps and defined this step for Object-MainObject. Because I want to fill a collection under MainObject.
I also did not defined Request Argumanets for this step.
3) Here is Agentry.ini
[HTTPXML-2]
name=HTTP-XML Back End
authenticationCertificateStore=
authenticationCertificateStorePassword=
authenticationCertificateStorePasswordEncoded=false
autoDequote=true
;baseURL=http://vkt-sap-erp01.vektora.com:8010/
;baseURL=http://vkt-sap-erp01.vektora.com:8010/sap/opu/odata/sap/z_catsdb_demo_srv/
baseURL=http://www.thomas-bayer.com/sqlrest
basicAuthenticationPassword=
basicAuthenticationPasswordEncoded=false
basicAuthenticationUserID=
constantsFile=httpxml_sd.ini
enableAuthentication=false
enablePreviousUserAuthentication=false
httpConnectTimeout=60
httpReceiveTimeout=300
httpResolveTimeout=60
httpSendTimeout=300
listenOn=8282
timeout=300
timeZoneName=
useSSL=false
xmlAllowXSLTScript=true
xmlNamespaces=http://www.w3.org/1999/xlink
xmlResolveExternals=true
xmlValidateOnParse=true
The problem is that during transmit, Fetch (Server Exchange Step : HTTPXML Step) gives error.
On log files it says ; Exception during fetch server exchange step for fetch 'ProFetch': HTTPXMLBackEndError: Error sending the Object Step HTTP request 'NewHTTPXMLStep1': HTTP/1.1 400 Bad Request in HTTPXMLBackEndUserConnection::doObjectRequest at backEndUserFetchConnection.cpp:96
Best Regards,
Serkan DEMIRThe URL is build by:
<BaseURL><STEPURL>
So you don't need to add the part of the URL that will be in the Agentry.ini to the step, ie: http://www.thomas-bayer.com/sqlrest
And it should just be: /PRODUCT -
KDE Printer Manager fails with "client-error-bad-request"
I'm having some trouble with printing on my system. The KDE printer manager shows "client-error-bad-request" and no other information. When I run the KCM from the command line, I also get "kcmshell(17286) KCupsRequest::serverError: status unrecognised: 1024" on the console. I wasn't able to find any useful information on this issue on google or these forums; not even what the 1024 status code means. It seems to me that this may be a bug in the kcm_printer_manager module, but I'd like to rule out other possibilities first. Unfortunately, I don't know what to try from here. I'll provide as much potentially relevant information as I can think of below.
Changes since last successful print job:
Multiple updates to KDE packages
Update to cups that changed systemd unit file names.
Stopped and disbled old units
daemon-reload
Enable and start new units
Other updates to cups since then, if I recall correctly.
Packages and versions:
kdeutils-print-manager 4.14.3-1 (owns kcm_printer_manager module for kcmshell4)
kdebase-runtime 4.14.3-1 (owns kcmshell4 binary)
cups 2.0.1-1
libcups 2.0.1-1
systemd 218-1
linux 3.17.6-1
Let me know if any other information might be helpful.Anyone please help.
Thanks,
Orton -
Is there a way to force firefox to send ajax-request when user clicks on a link and redirect occurs?
I'm trying to send ajax-request with web-analytics data when user clicks on a link. But Firefox cancels the request and moves to the link location. Sync requests or waiting for response is not an option because performance is critical.
Correct me if I'm wrong here:
<code>jQuery.data()</code> saves the <code>{"foo": "bar"}</code> JSON object to variable <code>data</code>, and then the <code>s.tl()</code> call sends <code>data</code> to the server, right?
You could use jQuery's [http://api.jquery.com/event.preventDefault/ <code>event.preventDefault()</code>] method to stop the browser from automatically following the link on click. You could wait until the Ajax request was finished before following the link.
<hr>
I hope that solved your problem!
<i>If it did, would you please choose this answer as your solution? It would help other Firefox users to find help on the forums faster and more efficiently. Thanks!</i>
And of course, feel free to post back if you need more help!
Happy browsing! -
Getting Bad request error while trying to get a specific document details from c#.
Hi,
While trying to retrieve a specific document details using RESTful WS API from C#, it is throwing "The remote server returned an error: (400) Bad Request" exception.
the request URL i am using for this is like; "http://<Server>:6405/biprws/raylight/v1/documents/1111"
But it is working fine, if i change my request URL to get the dataproviders of the same document like; "http://<Server>:6405/biprws/raylight/v1/documents/1111/dataproviders"
Please let me know if i am missing any thing in first case, getting the details of a specific document, while sending a request to RESTful SDK.
Thanks,
KalyanI think you are using “Content-Type” header or an “Accept” header.
You should be using “Accept: application/xml” for that request
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center
Canada
Follow us on Twitter -
Content-Type is net being set in HTTP header. Server returns 400 Bad Request error.
Hi,
I am trying to access an XML WebService. This service requires the content type of the request to be set to "text/xml". As you can see in the source code, I am setting the req.ContentType property to "text/xml".
However, this content type seems not to be added to the HTTP headers. The server returns a 400 Bad Request error as can be seen in the log.
I've attached a System.Net.trace log and it states:
[Public Key]
Algorithm: RSA
Length: 2048
Key Blob: 30 82 01 0a 02 82 01 01 00 bc 09 30 8a 1e 03 4d 7a ea 16 d3 a8 5e d8 5b 00 c4 8a c5 9f 26 bd 7d d6 cb 8b d0 db bd 93 2d 2b 3b 84 f6 20 79 83 34 67 51 37 21 ea 56 5e 18 d8 a3 db 72 43 0e 14 77 e2 64 cb 07 b6 2a 81 c7 f5 16 dd 19 c7 d9 68 0b 3a 81 5c f0 05 c9 ed 2b 37 00 31 41 37 8b 3a 73 4a 4d ab d7 d8 87 79 35 82 01 97 e3 3c be bb 84 e5 94 bb 87 52 e3 9f b5 fb 3e 33 38 c3 eb 73 42 ee ba 1e c5 4a 33 18 a1 0d 8a d2 10 a8 c5 3....
System.Net Information: 0 : [26780] SecureChannel#31884011 - Remote certificate was verified as valid by the user.
System.Net Information: 0 : [26780] ConnectStream#26966483 - Sending headers
API-VERSION: 1
Host: test.myhost.com
Content-Length: 329
Expect: 100-continue
Connection: Keep-Alive
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=100, StatusDescription=Continue.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=400, StatusDescription=Bad Request.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
0: Content-type
1: text/xml
X-Debug-Token: a810dc
X-Debug-Token-Link: /service/_profiler/a810dc
Connection: keep-alive
Content-Length: 3440
Cache-Control: no-cache
Content-Type: text/html; charset=UTF-8
Date: Tue, 14 Apr 2015 11:07:11 GMT
Server: Apache
...and here's the implementation of the web request:
private void ButtonSend_Click(object sender, EventArgs e)
WebHeaderCollection whCol = new WebHeaderCollection();
whCol.Add("API-VERSION", "1");
//whCol.Add("Content-Type", "text/xml; charset=UTF-8"); <-- That doesn't work in .NET. Content-Type has to be set on the ContentType-Property
string msg = _textBoxReq.Text;
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(_textBoxURL.Text);
byte[] data = Encoding.UTF8.GetBytes(msg);
req.Method = "POST";
req.ContentType = "text/xml; charset=UTF-8";
req.ContentLength = data.Length;
req.Headers = whCol;
req.GetRequestStream().Write(data, 0, data.Length);
string xml = "";
try
using (HttpWebResponse resp = (HttpWebResponse)req.GetResponse())
using (System.IO.StreamReader sr = new System.IO.StreamReader(resp.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
catch (WebException we)
using (System.IO.StreamReader sr = new System.IO.StreamReader(we.Response.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
_textBoxRes.Text = xml;
Can anyone help?
Thanks,
MiRiHi _MiRichter,
Well Done!
Thank you very much for sharing the solution to us.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
RegardsI have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 === -
XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Hi,
We are doing File to WCF Scenario( SOAP ). I am trying to post the Data to WCf usingf SOAP Reciver Adapter.
Getting the Following error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Thanks in advance>>> Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Answer: Use the third party wsdl in SOAP UI or any soap client tool and send the request and see the response. The problem here is the message structure mismatch between your request to the webservice and webservice expecting...
Possible 2 reasons:
1) You are not creating the target message based on the wsdl structure or not configured soap receiver properly.
or
2 ) Your wsdl is not latest or updated one or some changes have happened in the third party webservice hosting side. -
Msg=Unsupported response content type "text/html; 400 Bad Request
Hi All
this is the excpetion that I get when I am tring to run the
service MAnagerClient.
whether it is a list or deploy command :
can anybody help me?
Exception in thread "main" [SOAPException: faultCode=SOAP-
ENV:Protocol; msg=Unsupported response content type "text/html;
charset=iso-8859-1", must be: "text/xml". Response was:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>400 Bad Request</TITLE>
</HEAD><BODY>
<H1>Bad Request</H1>
Your browser sent a request that this server could not
understand.<P>
<HR>
<ADDRESS>Oracle HTTP Server Powered by Apache/1.3.19 Server at
ranaldb Port 1324</ADDRESS>
</BODY></HTML>
at org.apache.soap.rpc.Call.getEnvelopeString
(Call.java:175)
at org.apache.soap.rpc.Call.invoke(Call.java:212)
at
org.apache.soap.server.ServiceManagerClient.invokeMethod
(ServiceManagerClient.java:129)
at org.apache.soap.server.ServiceManagerClient.list
(ServiceManagerClient.java:151)
at org.apache.soap.server.ServiceManagerClient.main
(ServiceManagerClient.java:237)Hello,
Your message contains a an HTTP 404 error so the URL that you are trying to access is not valid.
Can you check from a browser what is the response when you call the endpoint?
http://server:port/wedanyservices-WedanyServicesPro-context-root/MyWebService2
I believe that you do not have a service deployed at this URL this is why you have such response, and you cannot send another response.
Regards
Tugdual Grall -
"The request failed with HTTP Status 400: Bad Request." when running reports
Hi,
I installed reporting services and the install went fine. The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
ThanksI reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
Maybe you are looking for
-
Need to display a value before the header based on a user parameter.
I have a select on the user parameter list of values. SELECT DISTINCT GROUP_ROWID, STR_GROUP_NAME FROM TBL_COMPANY_GROUP; I select the option hide the first column in order to show only a list of values and not the row_ids. I need to display the str_
-
Hello Experts, I have complex Biz Talk 2013 farm having 20 servers,15 Hosts. In my production environment even if there is no traffic i am getting throttling errors from SCOM for my all the production hosts. Error : One of the BizTalk Server processe
-
Session state protection and navigation to url outside apex
Hi I am working in on an app , in which base on unique key for each customer and i have to show his address on map(google.api) i used apex util to prepare url and enable checksumprotection on that item to pass it on the map. I have another page which
-
Findings of Greater value in BEx
Hi All I have two characteristics Suppose A & B which showing the data of dates.I want to calculate the result like if A>B show the result of B & vice versa. This two are characteristics. How can i do this in BEx only? Regards Bhagesh
-
Says I can't import recorded sound into iMovie because I the files don't have iLife preview
Hi, I am trying to either record sound directly onto iMovie to use as a voiceover or record on Garageband and then import it to iMovie. I have not found a way to record on iMovie, so I was trying to do it on garageband, but when I try to open the fil