Odbc driver error while OBIEE instal on LINUX tries to access Datawarehouse

Hi All,
I have installed OBI Apps on a LINUX machine.The ETL too ran successfully.As we can't install BI tool on LINUX I modified the OracleBIAnalyticsApps.rpd file on a Windows machine and copied it back to the LINUX machine.After modifying the NSQConfig.ini file I could see all the OBI Apps answers and Dashboards ie OBI Apps was installed on LINUX.But whwnever I try to access some data from OLAP i get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
SQL Issued: SELECT Time."Year" FROM "Human Resources - Workforce Profile" ORDER BY 1
Probably this is because all the DSN specified in the rpd file were present on the Windows machine.I don't know how to modify these values for LINUX.Please help.Nothing is mentioned in the install docc as far as LINUX installation is concerned.
regards,
Soumya.

I think when your BI Server is running on linux, you would use native drivers to connect to your data warehouse database and not ODBC. If your data warehouse is on a oracle db server, change the call interfact in the RPD connection pool to OCI and give the tnsname for the db server connection in the connection pool.

Similar Messages

Odbc driver error while connecting with Oracle BI in Linux

I have Oracle BI Server, Presentation Service and Oracle 11g Client installed in RHEL 5. Oracle BI client is installed in Windows so that I can use Admin tool.
I have created a repository in Windows for sh schema(by creating ODBC). After that I transferred this repository to the ..server/repository in the linux server.
I have installed Oracle ODBC Driver from EASYSOFT and added one odbc data source for sh schema in the ../setup/odbc.ini.
My ODBC setting is as follows.
[ODBC Data Sources]
sh=Oracle in OraDb11g_home1
[sh]
Driver=/usr/local/easysoft/oracle/libesoracle.so
Database=//ipaddress_of_ORACLE_SERVER:port/database_service_name
UID=sh
PWD=sh
When I am trying to query through Oracle Answers I am getting the following error.
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
SQL Issued: SELECT Customers."Cust First Name" saw_0 FROM SH ORDER BY saw_0
I have enabled tracing, but I am not getting any clue from trace output.
Can anybody please help.
If it is because of wrong driver, can anybody suggest a proper ODBC Driver for Oracle and how to configure it. If the driver is OK and configuration is wrong, can anybody tell me how to create system dsn in linux?
Thanking you in advance.

don't use ODBC for Oracle, use OCI
search on the forum, there's plenty of information about it.

Informix ODBC driver error while creating a view in Designer

I nedd to ceate a view in a universe (Business Objects XI R2) that is connected to an Informix database. I use the 3.34 ODBC Informix driver.
When I write the select statement (select column from table) and check the syntax I have the following error:
"Exception: DBD, [Informix][Informix ODBC Driver][Informix]A syntax error has occurred.State: 42000"
Is there anybody who has solved this problem??
Thanks in advance to anyone who can give me hints on how to solve problem.
Fabrizio

Hi Fabrizio,
The error state 42000 indicates that there is a syntax error or access violation. If you are using an Informix native client connection then add the following parameter <Parameter Name>"Force SQLExecute">Always</Parameter> in the informix.sbo file. Restart Designer and then try to create a derived table with a simple select statement.
If you are using an ODBC connection, then add the above mentioned parameter in the Generic section of odbc.sbo file.
Regards
Arun Sasi

Oracle 10G DB + 9.2 odbc driver error 12154

I installed on a Windows 2003 Server the Oracle 10G XE database.
then I installed the oracle client Version 9.2.0.1.0 where I only Installed the client and the windows services.
Why I installed the client in Version 9.2.0.1.0: I need the ODBC Driver in Version 9.2.0.0.0 for another software.
The Problem: When i try to connect via the Oracle odbc driver 9.2.0.0.0 (test connection),
I always get Error 12154 . On my Windows 2000 machine where I tested it, it works fine.
It also works fine when I use the odbc driver 10.2 from the XE installation.
Thanks in advance

Solved!

Odbc Driver error when using specific date column

I am receiving the this error:
Odbc driver returned an error (SQLExecDirectW).
Error DetailsError Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition len <= desc->objectLength_, file ..\Oci8\Src\SQXDGOci8.cpp, line 614. (HY000)
It happens when I try to to set criteria on a specific date column or I do not set criteria at all. If I set date column 1 to greater than 4 or so months back the report returns, along with all the dates from date column 2. But if I then try to set date column 2 as the criteria, no matter if I just ask for data from a week until today, I receive this error. I tried changing the Server Stack size to 512, but that did not help. Anyone have an idea on this???

You seem to be using an ODBC connection with an Oracle database, is that correct? If so you should install the Oracle client and use the OCI driver instead and it is much faster and stable than ODBC.

ODBC Driver Error

Using 8i oracle client and NT workstation, and the ODBC Driver is 3.52. After installing the 8i, the client logs in to the WBOE application,
and the error is cannot load resource file sqresus.dll, but it is residing on his HD?
Is it a permission problem or sharing or something else?
HELP PLEASE?
Thanks,
Lori
email is [email protected]

Kam,
We recommend that you post your inquiry to the ODBC Discussion Forum- http://forums.oracle.com/forums/forum.jsp?id=763957
The OTN Suggestions/Feedback Forum answers questions relating to the OTN site and other customer support issues.
Regards, Marilyn Schmidt

Graphics Card not enabling while i install REDHAT LINUX 5.

I use HP PAVILLION MODEL DV5-1106AX. It contains AMD processor and ATI graphics card.While i try to install REDHAT LINUX SERVER 5 in my laptop, the graphics card not enabling.Why it happen?
please reply to <text removed for privacy>
Message Edited by WendyM on 11-18-2009 12:51 PM

MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
Thanks for the reply!
The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
Last edited by hdhiman (2012-10-04 00:43:52)

Ms ODBC driver error -- How to solve

when I run a java code that has JDBC-ODBC link sometimes is sucessful but sometimes failed. Please give some advise!!!! Thanks
error msg :
SQLException: [Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
source code :
import java.sql.*;
import java.util.*;
     public class CreateCustomer {
     public static void main(String args[]) {
          String url = "jdbc:odbc:rd";
     Connection con;
     String createString;
     createString = "create table CUSTOMER " +
     "(CUST_CODE VARCHAR(10), " +
               "CUST_NAME VARCHAR(40), " +
               "CUST_ADD VARCHAR(40))";
          Statement stmt;
     try {
          Class driverClass = Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
DriverManager.registerDriver((Driver)driverClass.newInstance());
          catch (Exception t) {
                    t.printStackTrace(System.out);
     try {
     con = DriverManager.getConnection(url, info);
stmt = con.createStatement();
stmt.executeUpdate(createString);
stmt.close();
con.close();
          catch(SQLException ex)
     { System.err.println("SQLException: " + ex.getMessage());
}

DriverManager.registerDriver((Driver)driverClass.newInstance());Have you tried it without this line?
Kind regards,
  Levi

Page not found Error while open install app

I go through the all necessary steps to configure app domain & steps to create SharePoint hosted app still got 'page not found error'
The final app URL that i got afte r open install app -"http://app-125e72eedbe144.domain name:9922/FirstApp/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fsp1%3A9922&SPLanguage=en-US&SPClientTag=6&SPProductNumber=15.0.4420.1017&SPAppWebUrl=http%3A%2F%2Fapp-125e72eedbe144.domainname%3A9922%2FFirstApp"
i don't understand where i did mistake can any one help me to resolve that issue.

Hi,
According to your post, my understanding is that you get the “page not found” error while you open install app.
You need to have a SharePoint Web Application that is bonded to port 80 without a host header.
If you want to run it on https (SSL) then you also need to add an extra binding for SharePoint Hosted Apps to work.
For more information, please refer to:
Troubleshooting SharePoint 2013 Hosted Apps on-premises: “404 not found” error
404 & 401 Errors with the App Management Service - SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Oracle in instantclient_11_2 ODBC driver error 14001

Hi there,
I've tried to set up an Oracle ODBC Instant Client driver and I get this error:
"The setup routines for the Oracle in instantclient_11_2 ODBC driver could not be loaded to system error code 14001
"Errors found
"Could not load the setup or translator library
My Configuration is :
- ESX 5.0
- Virtual machine Windows 2008 64 bits (created originally under ESX 4.1)
- VMTools activated
- Oracle 11gR2 64 bits (11.2.0.1.0)
- Instant Client: instantclient-basic-nt-11.2.0.2.0.zip + instantclient-odbc-nt-11.2.0.2.0.zip
Path is :
C:\Oracle\instantclient\instantclient_11_2;C:\Oracle\product\11.2.0\dbhome_1;C:\Oracle\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;%systemroot%\system32\inetsrv;%systemroot%\system32\inetsrv
What can be done to rectify this?

Hi,
I had exactly the same problem with a comparable system configuration, but with the x86-64 packages (you tried to use the 32bit instant client due to the file names you mentioned).
Somewhere in the depths of the WWW I got the hint that the solution is to use the instant client V 11.2.0.1.0.
So I downloaded the older version and everything worked fine...
Also rememeber to set the TNS_ADMIN environment variable to the path of your "instantclient_11_2" directory and edit a tnsnames.ora file in that directory or else you won't be able to open a connection...
Good luck and best regards
Sebastian

Erroring while im installing

I had to uninstall my previous version of itunes because it errored while uninstalling. That is no longer the case. I physically deleted all files and the itunes folder, hoping that i could just reinstall no problem. While installing, i get the message "Error writing to file: C:\Program files (x86)\itunes\mozilla plugins\npitunes.dll. Verify that you have access to that directory."
Like i said, i completely got rid of all traces of my old itunes before trying to install this one.
Any help is much appreciated!! Thank You
~Sean

When I installed firefox it did deleted internet
it's still on my computer, but just the icon,
I can't open it

Won't Burn. Error While Multiplexing. I've tried everything. Please help.

I've seen this topic all over the boards. I have iDVD6 and my project won't burn because, after a couple of hours of asset encoding et. al., I get a message saying that there were errors while multiplexing. Here's what it's not:
1) It's not that I have chapter markers in bad places. I followed the rules. Then I eliminated all the chapter markers.
2) It's not that the sound is Mpeg. It's properly formatted.
3) It's not too long. I get the same problem with a 60 second version of the movie. And I have plenty of space on my hard drive.
Here's what I thought it was:
1) The film was created with three cameras, at least one of which was using 12 bit sound and set on LP, two problems I've learned that iDVD doesn't like. However, to solve this problem I did the following:
a) I created a full quality Quicktime Movie
b) I imported that full quality Quicktime Movie into a new iMovie project.
c) I exported the movie back onto my video camera, with the camera set for 16 bit sound, and LP.
d) I opened a new iMovie project and imported the new, edited, film back onto my computer.
e) But when I tried importing it into iDVD6 I got the exact same message about the multiplexing error.
It doesn't seem possible that I cannot use iDVD to burn my project. Any thoughts?
(I don't have toast, and I don't know any other editing programs. I want to use iDVD and iMovie. That's what I paid for and they should work. I assume that since this problem is all over the Forum boards that there may be a bug in the program. Has anyone heard about a patch?)
Thank you to all who resond. Much appreciated.

Charlie,
Tell us about the computer you're using. See my specs below for guidance.
As John said, make a disk image and then burn the DVD.
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
2) It's not that the sound is Mpeg. It's properly formatted.
What does "properly formatted" mean?
at least one of which was using 12 bit sound and set on LP, two problems I've learned that iDVD doesn't like.
As you've learned, that makes iDVD VERY unhappy.
e) But when I tried importing it into iDVD6 I got the exact same message about the multiplexing error.
You got the multiplexing error when importing into iDVD??? Or do you mean when encoding/burning direct to a DVD-R (not DVD+R or any other format)?

Oracle ODBC Driver adds bind variable when browsing whole table in Access

Hi, we are looking for some reasons why we may see this behavior in the Oracle ODBC driver (10gR2 and 11g) when using Microsoft Access (2003 or 2007)...
1) Link a table from the Oracle database.
2) Double-click the newly linked table to "browse" it.
Oracle sends the following statement to the server:
{color:#0000ff}select * from linked_table where primary_key = :b1{color}
It then proceeds to read the entire table.
If I tell Microsoft Access that there is no primary key, the query gets sent as:
{color:#0000ff}select * from linked_table{color}
And the query comes back as soon as the first 100 or so rows are fetched which is quite quickly.
ADDITIONAL NOTES:
1) If the table has a primary key or unique constraint, Microsoft Access automatically assigns that as the primary key.
2) We can stop the behavior in #1 if we wrap a view around it which prevents Access from discovering that information and then it prompts for a primary key definition.
3) If we use the Microsoft ODBC driver, the bind variable is not added no matter what the primary key defintiion is.
We're stumped and are looking for solutions and/or workarounds without having to wrap all of our tables in views to hide the fact that there is a primary key.
Thanks,
Steve

Thanks for the response, Greg.
The specific question I am seeking an answer for (sorry it was not clear on my first message) is this:
Why does the Oracle driver add the bind variable to the query only when the primary key is defined?
The Microsoft ODBC driver does not add the bind variable with or without a primary key defined.
You asked how I traced this statement and what I am doing is launching the query in Access and then using TOAD to view the V$SESSION and V$SQL_TEXT_WITH_NEWLINES views. All I do is change the driver. This is just for a simple browse table (double-click on the table) which should send
select * from table
However, whenever I use the Oracle ODBC driver (with a primary key defined) it sends
select * from table where primary_key = :1
If I remove the primary key on the table definition, the Oracle driver sends
select * from table
What is it about the primary key that could cause that behavior?
I don't think it is the MDAC/Jet level because this is the conversion to the native SQL statement not the Jet version. I know the Oracle driver has to do that part because you have those workaround options like don't add the RULE hint, etc. That's not part of the Jet engine.
Hope that helps. I'm just baffled over this one and wish I knew where to go next.

Getting Error ID 4625 when one service tries to access a shared path on another machine

Hi guys .. I have a scenario where there are two machines involved, both of which are using
Windows Server 2008 Standard. One is called the IS Server (has IP 10.1.1.89 and machine name bxtwmistv1) and the other is called the
MWS Server (has IP 10.1.1.88 and machine name bxtwmmwstv1). They are both part of the
infosix.root domain. Their users are also part of this domain. On the IS server, there is a drive, R:\, which is shared on the network through the UNC path
\\bxtwmistv1\R. On MWS server, there is a service called
MWS Service, which is supposed to access that shared folder \\bxtwmistv1\R. The MWS service is running using a domain username to start itself:
[email protected] On the IS server, I have given Full Control rights for the domain user [email protected], for the shared drive.
However despite doing all the above, MWS service is unable to access the shared folder, and when it tries to access it, I get the following error on IS Server's Event Viewer:
An account failed to log on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:
bxt1
Failure Information:
Failure Reason:
Unknown user name or bad password.
Status:
0xc000006d
Sub Status:
0xc000006a
Process Information:
Caller Process ID:
0x0
Caller Process Name:
Network Information:
Workstation Name:
BXTWMMWSTV1
Source Network Address:
10.1.1.88
Source Port:
55768
Detailed Authentication Information:
Logon Process:
NtLmSsp
Authentication Package:
NTLM
Transited Services:
Package Name (NTLM only):
Key Length:
0
I've tried my best to try and figure out what's wrong here, but I can't. Can someone tell me what might be the problem ?
Also, I tried logging into the MWS Server using the [email protected] domain user account (which the MWS service is using to start itself), and I was able to access the shared folder, and write to it as well.

According to the post of the error, the wrong domain name is specified for the service:
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:bxt1
But you said the accounts were: "They
are both part of the infosix.root domain"
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

"Load Driver" error while installing Win7 on Satellite C665

My hard drive in my laptop died on me, so I got a new hard drive (Solid State) and am installing Windows 7 on it on my Toshiba (Satellite C665 model PSC55A)
I don't seem to be alone in encountering this error: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now." However everyone seems to get it for different reasons and I've tried multiple things.
The first obvious one: Use the disk I got with the laptop. I've moved houses since I bought the laptop. Looked through every box in the house and and I think it may be lost to oblivion.
The next most obvious: Load the drivers from the Toshiba support. Tried that. Doesn't work. Not sure why, but I downloaded the drivers from Toshiba, extracted them, put them on a USB. In "Install Windows" in sees a list of all the drivers. I attempt to install all of them, it goes through them all. At the end of it it still doesn't work.
The next: Windows 7 USB/DVD Download tool. I read it would work, so I attempted it, and it didn't.
I've also read BIOS, "Disable AHCI mode for your disk controller in the system BIOS", I'm not the greatest so I may not have gotten this step right, but the only time I found AHCI in the BIOS I couldn't change it to IDE or ATA as was suggested, I could only change it to "Compatibility"
Thank you for your help, I hope I don't sound too hopeless.

>I found AHCI in the BIOS I couldn't change it to IDE or ATA as was suggested, I could only change it to "Compatibility"
This is right.. you can switch the SATA mode to AHCI or compatible mode.
In AHCI mode the notebook requires the SATA driver in order to see the HDD or SSD drive. In compatible mode the HDD/SSD drive should be visible while system installation but the HDD/SSD drive would operate in IDE mode means the HDD/SSD drive would be slower.
But as I understood the posting, youve got problems with CD/DVD drive. Is this correct?
This really strange because the Windows Setup doesnt need any ODD (optical disk drive) drivers the installation setup contains common CD/DVD drive which controls the disk drive.
I read in other forums that this problem could be related to faulty Windows installation disk. It would be interesting to know if you can use another disk to install the system
I found also this MS knowledge base article:
[A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you install Windows|http://support.microsoft.com/kb/2755139]
The reasons for that might be:
The installation DVD is removed during the setup process.
A low-quality DVD was used to create the installation DVD.
The speed at which the installation DVD was burned was too fast.
The DVD drive cannot read the media.
The ISO file is corrupted.

Odbc driver error while OBIEE instal on LINUX tries to access Datawarehouse

Similar Messages

Maybe you are looking for