ODBC errors for Oracle Migration Workbench and SQL Server 2000 on Windows

Hi all-
I setup a new ODBC connection for the Oracle 10g Migration Workbench to MS SQL Server 2000 on Windows XP and keep getting the following errors when I try to
either test the new ODBC connection to MS SQL Server 2000 for use with the Oracle Migration Workbench tool. Goal is to fix these errors so that I can migrate our test SQL Server 2000 databases to Oracle 10g.
Current configuration
- Oracle 10.1 Migration Workbench
- Oracle 10g Database (target)
- MS SQL Server 2000 (source database)
-Windows XP
-ODBC 3.85.1117 driver for Windows XP with SQL Server and Oracle
Errors:
I. When I test the ODBC connection:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
Now here is what has me totally confused:
I can use the command line ISQL to access the database on the server and IP is all correct and port is available. So I can access the SQL Server database fine it is when I try to setup ODBC that it gives me problems.
Any tips how to get this ODBC working?
Thanks
Ben Prusinski

1. Jing Jin. If you had READ the post you would have seen that installing later versions is NOT an option.
2. Not supported does NOT mean does NOT work, as Balmukund pointed out in the referenced thread. The site that this databases supports is using ASP which is also NOT supported by Microsoft. As it turns out Balmukund's solution actually turns
out to be the correct solution. I installed SS2K and its Service pack 4 on the machine last night. Good answer Balmukund. as we say in the Navy, "BRAVO ZULU!!" which means "WELL DONE!!
3. Tom Li I just posted the question less than 48 hours ago. My last post was less than 24 hours ago. I think I have the right to be given the opportunity to determine whether a reply is the answer or not. I understand you don't like unanswered
posts sitting around for weeks, months or years. (I don't like it either as I have a few that are still unanswered after several years.) But you should not be showing replies as answers before I even get a chance to see them, much less try them out.
You should also not be showing replies as answers which don't address the criteria of the question. I specifically stated that I had to install SS2K. I went on to state, "And before anyone asks I need to install this version because that is what
the customer is using and I need to duplicate their databases." So the correct answer, if in fact SS2K did not work on Windows 7, would have been a virtual machine answer, as suggested on the thread Balmukund referenced. So before you mark a reply
as an answer read the question.
Edward R. Joell MCSD MCDBA

Similar Messages

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Enable to open omwb.zip for Oracle Migration Workbench

Dear Freind,
I download omwb.zip for Oracle Migration Workbench from followinf link but i am enable to unzip/extract it, it is showing error like "It dose not appear to be a valid archive" http://www.oracle.com/technology/software/htdocs/devlic.html?http://download.oracle.com/otn/nt/omwb/101040/omwb.zip

I have the same problem.
Do you already have a solution?

Sap4.7 and sql server 2000 on windows2003:when install di ,error:MDB-05039

sap4.7 and sql server 2000 on windows2003:
when install database instance ,there is a error,at change tempdb
MDB-05039:Unable to stop server dev ,
please help !!!!

Every time you start SQL Server it also creates a new tempdb. When you change the layout (physical structure, size) you have to restart SQL Server in order for these changes to take effect.
It seems that the installation routine has changed the layout (it does that according to your input!) and is now trying to stop and restart SQL Server. When you run into this error, have you tried to stop and restart SQL Server manually? After that choose the Retry option of the installation routine. Just a guess...
Do you have some more log information?
Sven

Which Laptop is good for VS 2012/2013 and SQL SERVER 2008 R2 /2012 ?

Hi,
I am planing to buy a laptop.
I am gonna be using mostly for Visual sStudio 2013 and Sql Server 2012 .
my budget is $1000.
confuse between DELL/ HP / LENOVO..!!!
please help.

This is only a personal taste of mine:
I prefer to work in Virtual Machines. In fact I did set up a VM just for my programming. This has the advantage that games and other stuff are not slowed down by SQL Server Services and similiar stuff.
This also allows me to quickly make a small virtual networks with multiple clients if I need to test some client/server stuff.
Plus I am also a bit of an adminstrator and prefer to test stuff in VM's before I try them in the real world.
I prefer using Virtual Box for Virtual Machines, so one thing of big importance was support for VT-X/AMD-V. Without them Virtual Box cannot run x64 guests even on a x64 host system.
Otherwise I wanted Windows 8 (so I could finally learn to live with it/learn programming for it's UI). And of big importance was an upgrade of gaming ability (my old one had difficulty/impossibility to run most current games).
So I bought a x64, Win8 Gaming Laptop with 8 GiB RAM (so I can run 3-6 Windows 7 hosts in paralell) and looked that the CPU supported Hardware Virtualsiation.
Otherwise pretty much every current laptop will work. x64 OS might be prefereable, as .NET has some limitations under x32/x86 OS (like the
2 GiB limit). Multicore (2 or more) is pretty much the state of the art (are there still any single core CPU's out there?).
It of course needs to be a Windows (7 or 8) to support VS. New Laptops should have UEFI (all that are sold with Windows 8 have).
If you do not need a lot of storage, using a SSD instead of a HDD will propably speed up startups (Windows, Programms) and compilation times a lot (those are disk-heavy operations) - but I only know that it should and heard of people who have them.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

Documentation for oracle webcenter wiki and blog server 10.1.3.2.0

Hi
Can anyone tell me where I can get the documentation for oracle webcenter wiki and blog server 10.1.3.2.0. I am specifically interested in this version and not the latest version Oracle® WebCenter Wiki and Blog Server 10g Release 3 (10.1.3.4.0) because I have heard the older version provided out of the box portlets for creation of blogs.
Since we want blogs very fast, I want documentation of this older version.
Can anyone point them out to me as soon as possible please

You can find the demo portlets here: http://www.oracle.com/technology/products/webcenter/owcs_10132_demos.html#wiki_blog_disc_samples
I do not believe there were any portlets provided with the earlier release.
Anyway what i think is it should not take you more than a few hours to integrate blogging functionality if you are using the Connection & Task flows provided by WebCenter.
Venkat

JDBC Connection between Unix and SQL Server 2000

I have SQL Server 2000 installed in a pc as a data server and SQL Server 2000 JDBC Drive installed in a Unix machine. Both machines are connected and can ping each other. After setting up the environment data, I ran a test code to test the connection and got exceptions. ( I did the same process between a pc and the data server, it works well.)
Attached are the test code and error message. Hope someone can help me.
******* Test Code ********
import java.sql.*;
* Microsoft SQL Server JDBC test program
public class Test {
public Test() throws Exception {
// Get connection
DriverManager.registerDriver(new
com.microsoft.jdbc.sqlserver.SQLServerDriver());
Connection connection = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://<hostname>","<username>","<password>");
if (connection != null) {
System.out.println();
System.out.println("Successfully connected");
System.out.println();
// Meta data
DatabaseMetaData meta = connection.getMetaData();
System.out.println("\nDriver Information");
System.out.println("Driver Name: "
+ meta.getDriverName());
System.out.println("Driver Version: "
+ meta.getDriverVersion());
System.out.println("\nDatabase Information ");
System.out.println("Database Name: "
+ meta.getDatabaseProductName());
System.out.println("Database Version: "+
meta.getDatabaseProductVersion());
} // Test
public static void main (String args[]) throws Exception {
Test test = new Test();
******* error message ********
Exception in thread "main" java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:64)
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:137)
at Test.<init>(Test.java:10)
at Test.main(Test.java:32)
************ end of message ***********

If it works from a PC and not from the Unix box then you may have a network issue of some sort, I.E. firewall not letting it through etc.
Try using telnet on the Unix box to see if you can connect to the sql server on the port that the SQL server is listening.
E.G.
telnet server_name 1433
You may need to change the port number to the one that the SQL server is using.
Col

Reg. Migrating data from SQL Server 2000 to Oracle

Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathap

hi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R

ODBC Error connecting to a stored procedure SQL Server 2008 - Crystal 8.5

I am running a local copy of SQL server 2008 and get an ODBC error when connecting to any stored procedure with or without parameter. The database are running in SQL Server 2000 compatibility mode on the local server.
Do not get the error when connecting to one or more databse tables or when connecting to a stored procedure on a remote database.
The error reported is "ODBC error:[Microsoft][ODBC SQL Server driver] Syntax error or access violation"
I am running Vista OS.
Any help would be appreciated..

Hello,
Interesting combination. All but CR 8.5 is supported on that OS.
When you created your DSN did you using the 2008 Client or MDAC?
I suggest you go back to supported platforms for CR 8.5
If not then start debugging Vista permissions to start with...
good luck
Don

Transfering information between Oracle 8 and SQL Server 2000

I want to transfer some of the data stored in 4 different tables in my Oracle database and easy as possible to my SQL Server 2000 database. I found the import option in SQL2k which uses ODBCconnection to the Oracle but it needs the migration suit as far as I know. At the downloadarea there are only plug-ins for SQL Server 7 but not 2000.
Am I even on the right track or is there any other way of accomplishing this?

is there any known problem if I install Oracle 10g EE
on the same machine where Sql Server 2000 EE is
install?It's presently undocumented, but some of the ORACLE.EXE process threads are known to get stuck in an infinite loop whenever a SQL Server database is running on the same box. The infinite loops cause the SQL Server database to eventually shutdown, and then the loops are broken and Oracle returns to normal. Stack traces have revealed something like this, which would suggest that the Oracle process is actually communicating with SQL Server:
Oracle: laughAtGirlieDatabase() /* infinite loop */
SQL: exit();-)

Oracle 6i and SQL Server 2000

We are trying to get Oracle 6i to work via ODBC with SQL Server 2000. We get it to login, but can't get it to do anything else.
Any ideas? (I can be reached at [email protected])

dev2000 , 6 and 6i can run with other database i.e db2 , MS Sql by using odbc to connect with database .
1. create odbc for yuoer database .
2. your oracle must install OCA (Oracle client Adapter ) that come with CD install form
3. test connect with sqlplus like this
user_name/pwd@odbc:odbc
4. use this connect in your form
5. finished.
sometime i have problem with 6i . i cannot connect so i have to copy file UB80*.dll from CD install 6 and replace in 6i
then i can connect database ... please try ...

Discoverer 4.1 and sql server 2000

Hi,
I am having difficulty creating an EUL using discover41
againstr SQL Server 2000. I have created an ODBC source
which i can connect to and Discoverer Administrator
starts to create the EUL but always fails at the end
giving the error:
Creating tables and views...
Populating tables with default data...
Install failed, cause : [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column name 'suid'
can anyone help?
Also if i create the EUL in Oracle and then connect
to Administrator then create a new Business Area and then
select the database as a database link i've created.
I select the sql server user and select the tables
but as it tries to import them i get the following error:
ORA-03113: end-of-file on communication channel.
can anyone help with this to?
thank you,
Jonathan.

Hi,
here is the link to the 'compatibility pages' for BI 4.1 http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
you want the slide 'data access' , then click on the button 'Semantic Layer Datasources' to view the lookup matrix
without looking, I would say SQL 2000 isn't compatible / officially supported
regards,
H

Oracle (Linux) to MS SQL Server 2000 (Windows 2003) with OTG

I have Oracle 9i Release 1 running on linux and i want to use Transparent Gateway to connect to MS SQL Server 2000 running on Windows 2003. Is it possible to setup this connection?
If yes, please include the detail approach of installation.
Thank you....

Dear kgronau
i tried the transperent gateway in Win2003
both sqlserver and oracle 10 g onthe same os (win2003)
Created listener and tnsname settings as per the documention spec..
then created a database link for sqlserver here.
my transpernet gateway works without any problem,
Then,
I have Oracle on Linux also,
i created a tnsname settings here for the win2003 listener (for sqlserver connection).
then created a database link for sqlserver here
im not able to connect sqlserver.
i tried to desc one table (sqlserver)
the following error i get,
do you have any idea, what i have missed???
SQL> DESC CUSTOMERS@SQLDB
ERROR:
ORA-02068: following severe error form SQLDB
ORA-03135: connection lost contact
please give some hints what is the problem
remember the listener is running on windows 2003
regards

HELP: Reports Builder 9iDS Rel2 and SQL Server 2000

Hi,
I need to connect to a SQL Server 2000 database from within Report Builder (for a proof of concept) and I am getting error 62000-Failed to connect to datasource.
Can you help?
My OS is Windows Prof 2000.
I have Downloaded Oracle 9iDS Rel2 and Oracle 9i AS J2EE and Web Cache. They are installed in the same Oracle Home.
I have modified the REPORTS_CLASSPATH with the datadirect jar files and the j2ee oc4j.jar.
The oc4j.jar is in my system classpath.
I have added the classpath definition with jars to my rwserver.conf.
I start Report Builder select JDBC Query
enter my connect info:
Username: user
Passowrd: pwd
Database: dbname
and select the merant-sqlserver driver from the list.
What am I doing wrong?
I have been at this a week can anyone help?
Thanks.

Hi Jeanne
1. When you run the report to paper design from builder, you need to add the necessary jar file of driver to REPORTS_CLASSPATH env variable in registery.
2. To run the report from report server and to generate to file from report builder, you need to add the jar files via classPath attribute of engine element in server/builder conf file. It would be like this
<engine id="rwEng" .....classPath="<yr classpath>" >
3. Have a look at jdbcpds.conf file in OH/reports/conf dir. This file need to have the driver information for the driver you are using. The entry here also specifies the connect sting format which is required by the driver. You need to refer to driver doc for connect string format.
Once you have all this set up ready, run the report. You need to mention the connect string in same format as specified in driver info in jdbcpds.conf file.
Try this.
Thanks
Rohit

Reports Builder 9iDS Rel2 and SQL Server 2000

Hi,
I need to connect to a SQL Server 2000 database from within Report Builder (for a proof of concept) and I am getting error 62000-Failed to connect to datasource.
Can you help?
My OS is Windows Prof 2000.
I have Downloaded Oracle 9iDS Rel2 and Oracle 9i AS J2EE and Web Cache. They are installed in the sale Oracle Home.
I have modified the REPORTS_CLASSPATH with the datadirect jar files and the j2ee oc4j.jar.
I have added the classpath definition with jars to my rwserver.conf.
I start Report Builder select JDBC Query
enter my connect info:
Username: user
Passowrd: pwd
Database: dbname
and select the merant-sqlserver driver from the list.
What am I doing wrong?
I have been at this a week can anyone help?
Thanks.

You should ask this on the Reports discussion forum, you'll get a better answer there.
http://forums.oracle.com/forums/index.jsp?cat=19

ODBC errors for Oracle Migration Workbench and SQL Server 2000 on Windows

Similar Messages

Maybe you are looking for