ODBC - SQL command on connect

Does anyone knows if is possible to execute a sql command when the connection with the database is done.
For example: set alter session or set role.
Thanks.

You can define a login trigger in the database that will do this whenever a particular user logs in.
Justin

Similar Messages

Error:java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Connection

Hi,
while running jsp page i m getting error as follows:
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt..
what is this error...
what should i do to solve this problem...
plz let me know what is this error & how to solve this...
Thanx in advance....

Why don't you do a search in google with the excpetion?
If you cannot then try this link
[http://www.idssoftware.com/faq-e.html]

Sql commands fro connect + disconnect

Hi,
When use sqlplus we can use connect and disconnect.
Wish to establish fresh connections.
What is the command we could use in tool like sql developer/pls/ql developer so can issue this command from non sqlplus environment and just standrad gui tool.
Thanks

user5716448 wrote:
Have a procedure which accesses remote database.I assume PL/SQL?
If remote database comes down during ezxecution of this procedure, would like to expliciitly connect or even better disconnect before database comes down then reconnect afterwards but whilst still in the same program
How can we issue such a fresh connection via sql pl/sqlA database link is used in a database as a connection to another database. When using a database link the first time in a database session, a remote database session is created (assuming a successful connection to the remote database.). This happens implicitly. There is no explicit statement to use to create the connection to the remote database via that db link.
Closing a database link can be done explicitly. The ALTER SESSION CLOSE DATABASE LINK needs to be used.
As Ed already explained: for disconnecting/reconnecting to a remote database as it goes down and then available again - not possible as you get no warning prior to the database going down, or notifications when the database is up again, via a database link.

Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!

Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

Connection error when logining in from sql command line

I'm getting the following errors when I attempt to connect using the sql command line. I have installed 10g Express on XP home addition. The errors are as follows:
ORA-01034 Oracle not available
ORA-27101 Shared memory realm does not exist.
Thanks

I am getting this error in the oradim log file:
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'D:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora'
checked this directory and it is empty
should I uninstall and reinstall. Can I get this file somewhere?

Javascript: Check Internet connection before attempting to run SQL command on remote server

Good evening,
I am developing a form that reads and posts data from/to a table hosted on a remote PC running XP/SQL Server Express 2008 R2. I access the server through the Internet.
My problem is that if the internet connection happens to be down when I -eg- try to save data to the table using the form, the SQL command tries to reach the server for a while, and eventually crashes.
Is there a way to programatically verify that a remote SQL server is reachable over the Internet before attempting to run a command on it?
Many thanks in advance for any help you can provide!
Randy

Did you find a solution to this? I am attempting a similar form and need to verify there is an active internet connection before allowing the form to process.

[[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]

Hii ..
need help on this ..
This what I am doing ..
I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same in that order only in my SQL table.
When I run it fails with this error:
ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
SQL Connection is Freed
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
Total Calc Elapsed Time for [test.csc] : [1.44] seconds
=============================================================
I did a simple test on my Sample.basic application then ..
loaded the calc data to it and then used the below script to export to a flat file
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
                DataExportLevel "Level0";
                DataExportOverwriteFile ON;
                DataExportColFormat OFF;
                DataExportDimHeader OFF;
FIX(
            "Jan",
            "Sales",
            "Actual"
/*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
ENDFIX
out put as below:
"Sales"
"100-30","California"
"Jan","Actual",145
Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
but when I create the columns with same name as what its in export
Sales/100-30/Califirnia/Jan/Actual
It created the new rows successfully ..
So with this I think the error which I am getting with my other application might be because of the same column issue .. but then I have created all the columns by looking at the export file only as I did in sample ..
Any idea would be helpful ..
Thanks
Abhishek
I

First make sure you add
DataExportRelationalFile ON;
to your set commands it is missing
I alwats like to also add
DataExportColHeader dimensionName;
so I am sure what dimension is getting put into the columns.
Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table -1 + the number of members you will be returning as columns in the export
Taking your example Sample basic has 5 dimensions
Measures
Years
Scenario
Product
Market
Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
5 -1 + 1 = 5 columns in your table which is what you found works. Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2

[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.

OK, something seemed to have changed with my system because this error is NEW. It might be related to my system upgrade from Vista to Win7, but just guessing here.
I run a database on a corporate MS Sql Server (2005) and an ASP application that connects via ODBC. The real world application works fine, however when I attempt to access Stored Procedures from Dreamweaver (on my development machine) I am getting the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.
This only seems to happen on Stored procedures that RETURN a recordset.
system:
Win7
Dreamweaver CS4
Code: VBScript/Classic ASP
SQL Server 2005
Connecting via ODBC: MM_MY_STRING = "Driver={SQL Server};Server=wscxxxxxxxxx;Database=dbsystem;Uid=username;Pwd=XXXXXXXXXXXX"
Stored procedures that do not return a recordset are not an issue.... this has put my development work at a standstill!!
Thanks in advance!

Well, I hate bumps, but I am really running out of solutions. I have now tried to use a system DSN on my development machine and that didnt solve the problem. I just un-installed DW and re-installed it and that didnt solve my problem either.
This is very frustrating, because I cannot use any stored procs that return recordsets... I am stuck... can anybody think of a relatively easy work-around to working in DW w/ recordsets that come from SPs when you cant actually access them?
The really weird thing is, when I build the command, and choose the stored proc, and give it valid input variables, and TEST it from the TEST button, everything works and data is returned as expected. Once I click "OK" and actually add it to the ASP page the recordset that should be visible isnt... and when I click the plus sign in the bindings window I get the error...
Help!!

JDeveloper 10g - ODBC (MS-Access) database connection

Hi!
I'm a new JDeveloper user.
I can connect to an ODBC (Access) database and I can see tables in Oracle JDeveloper 9i. It's work fine.
I can connect to an ODBC (Access) database but I CAN'T see tables in Oracle JDeveloper 10g(Connections Navigator-tables). It's NOT expanding table items. But when I enter an select sql command in SQL worksheet, it shows me datas in my tables. it's work. How can I resolve this problem?
I've downloaded only JDeveloper 10g Preview zip file at www.oracle.com. Do I need download any program or application/driver ?
Thanks...

Note that JDeveloper 10g is only a preview release-- i.e. a beta. I'm sure that there are bugs in it at the moment which will be addressed in the final release.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Working With Two External Files With T-SQL Commands

Hi friends,
In a VSTO Excel AddIn of mine I have come across a need to use T-SQL commands before bringing the dataset on the activesheet, derived from two tables in the shape of external CSV files. However,
since using SQL Express in this regard requires connection to a server. With Visual Studio as well as SSMS installed on my laptop I'm able to use the said facility but I am unable to distribute such an addin to other team members not having any of the studios
installed nor access to any server.
Is there any way to use the similar features on the users' side?
In other words, how to develop a macro, for example, in which I could consider two CSV files as two different tables as in a database, and carryout some T-SQL functions/commands on the same like:
UNION of first three columns from both the tables;
Creating a temporary table with the DISTINCT sets of the said three columns; and
Then carryout LEFT JOINS between the new table and the earlier two tables;
to derive a simple comparative dataset?
Looking forward for you experts' valuable advices in this regard.
Thanx in advance.
Thanx in advance, Best Regards, Faraz A Qureshi

Hi FARAZ,
As with Excel files, you can also use Odbc driver to connect to CSV files. As long as the user's machine installs the ODBC driver, you can OdbcConnection to connect to the CSV files.
The sample code to manimulate CSV files with ODBC driver(C#):
string connectionString = @"Driver={Microsoft Text Driver (*.txt; *.csv)}; Dbq=C:\; Extensions=asc,csv,tab,txt;";
using (OdbcConnection conn = new OdbcConnection(connectionString))
conn.Open();
string sql = "SELECT u.UserName,u.Age,c.Phone,c.Address FROM user.csv u left join contact.csv c on u.Id=c.UserId";
using (OdbcCommand cmd = new OdbcCommand(sql, conn))
But if you want to publish the Add-in to the user's machine, you still need to install the .Net Framework and the VSTO runtime to support the Add-in.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal Reports for Enterprise - SQL Command - Array Fetch Size

We're attempting to migrate a report created in Crystal Reports 2013 Support Pack 3 Version 14.1.3.1257 to...
Crystal Reports for Enterprise Version 14.1.3.1300 Build: 2013 Support Pack 3 Patch 1
The originating report is successfully connecting and returning data from MySQL through the MySQL ODBC 3.51 Driver (3.51.30.00), using a SQL Command
When opening up this report in CR for E and running the report against the same database and the same version of database driver, we get the following Crystal Reports error:
Crystal Reports
A problem was encountered
The following error has occurred while trying to retrieve the data:
Error on Fetch : Largevarchar and Largevarbinary data cannot retrieved as variable-length data if the array fetch size is not set to 1.
Please check with your System Administrator that the data source is correctly configured.
How would we check and where would we adjust the array fetch size within Crystal Report for Enterprise?
Thank you

Hi Vitaly,
I had not yet tried creating a new report based on the query, within CR for E, but I did now upon your request\suggestion. Yes, it fails as well with a brand new report..same new error as above: "Non Supported Datatype"
I've pasted the SQL we are using below. I just tried running this exact query natively through MyPHPAdmin, and also creating a brand new report with Crystal Reports 2013 against the same ODBC driver that I am trying to use within CR for E. In both cases the query was accepted and ran successfully.
Driver info:
MySQL ODBC 3.51 Driver - Version 3.51.30.00
I have also tried 2 newer versions of the driver:
MySQL ODBC 5.3 ANSI - Version 5.03.02.00
MySQL ODBC 5.3 Unicode - Version 5.03.02.00
...where I also configure each within the Information Design Tool so that the "Array Fetch Size"= 1
I receive the same "Non Supported Datatype" error for these drivers as well. The MySQL server version is: 5.1.73-0ubuntu0.10.04.1-log
Protocol Version: 10
MySQL charset: UTF-8
Here is the query:
SELECT ft.seq_id, ft.ticket_date, ft.posttotal,
wl.name as current_approval_level,
TIMESTAMPDIFF(DAY,ft.ticket_date,NOW()) AS Days_Since_TicketDate,
TIMESTAMPDIFF(DAY,ft.date_created,NOW()) AS Days_Since_Created,
TIMESTAMPDIFF(DAY,wph.workflow_date,NOW()) AS Days_Waiting_Your_Approval,
ft.internal_comments
FROM ticket AS ft
LEFT JOIN unit AS unit ON (ft.unit_id = unit.id)
LEFT JOIN unit_district AS udist ON (udist.unit_id = unit.id AND (udist.effective_date IS NULL OR udist.effective_date = 0 OR udist.effective_date <= ft.ticket_date)
AND (udist.expiry_date IS NULL OR udist.expiry_date = 0 OR udist.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_document_process_map AS wdpm ON (ft.id = wdpm.document_id AND wdpm.document_type_id = 1)
LEFT JOIN workflow_process AS wp ON (wp.id = wdpm.workflow_process_id)
LEFT JOIN workflow_rule AS wr ON (wp.workflow_schema_id = wr.workflow_schema_id AND wp.workflow_level_id = wr.workflow_level_id AND wr.workflow_activity_id = 2 AND (wr.effective_date IS NULL OR wr.effective_date = 0 OR wr.effective_date <= ft.ticket_date) AND (wr.expiry_date IS NULL OR wr.expiry_date = 0 OR wr.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_rule AS wr2 ON (wp.workflow_schema_id = wr2.workflow_schema_id AND wp.workflow_level_id = wr2.workflow_level_id AND wr2.workflow_activity_id = 4 AND (wr2.effective_date IS NULL OR wr2.effective_date = 0 OR wr2.effective_date <= ft.ticket_date) AND (wr2.expiry_date IS NULL OR wr2.expiry_date = 0 OR wr2.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_process_history AS wph ON (wph.workflow_process_id = wp.id)
LEFT JOIN ticket_attachment AS ftattach ON (ft.id = ftattach.ticket_id AND ftattach.attachment_type_id = 2)
LEFT JOIN person AS p ON (ft.supervisor_id = p.id)
LEFT JOIN person AS p2 ON (ft.head_office_contact_id = p2.id AND (p2.effective_date IS NULL OR p2.effective_date = 0 OR p2.effective_date <= ft.ticket_date)
AND (p2.expiry_date IS NULL OR p2.expiry_date = 0 OR p2.expiry_date >= ft.ticket_date))
LEFT JOIN person AS p3 ON (ft.sales_person_id = p3.id)
LEFT JOIN person_company_sales AS pcs ON (p2.id = pcs.client_person_id AND pcs.company_id = ft.client_company_id)
LEFT JOIN person AS p4 ON (ft.created_by = p4.id)
LEFT JOIN person AS p5 ON (ft.well_site_supervisor_id = p5.id)
LEFT JOIN division AS d ON (ft.division_id = d.id)
LEFT JOIN district AS dist1 ON (ft.district_id = dist1.id)
LEFT JOIN district AS dist2 ON (udist.district_id = dist2.id)
LEFT JOIN company AS c ON (ft.client_company_id = c.id)
LEFT JOIN province AS prov ON (ft.job_province_id = prov.id)
LEFT JOIN ticket_attachment AS ftattach2 ON (ft.id = ftattach2.ticket_id AND ftattach2.attachment_type_id != 2)
LEFT JOIN locale_currency AS lc ON (lc.id = ft.locale_currency_id)
LEFT JOIN operation_type AS ot ON (ot.id = ft.operation_type_id)
LEFT JOIN incident AS i ON (i.ticket_id = ft.id)
LEFT JOIN invoice_type AS it ON (it.id = ft.invoice_type_id)
LEFT JOIN workflow_level AS wl ON (wl.id = wp.workflow_level_id)
LEFT JOIN company AS dist1_company ON (dist1_company.id = dist1.internal_company_id)
WHERE 1
AND ( pcs.sales_person_id = 2113 AND pcs.effective_date <= ft.ticket_date AND ( pcs.expiry_date >= ft.ticket_date OR pcs.expiry_date = '0000-00-00 00:00:00' OR pcs.expiry_date IS NULL) )
AND ft.closed_flag <> 1 AND (wr2.id IS NOT NULL OR wr2.id != 0)
AND ft.commit_flag = 1
AND ft.dispatch_status = 0
AND dist1_company.country_id = 1
AND wr2.role_id = 2
GROUP BY ft.id
ORDER BY ticket_date ASC, ft.id ASC
Thanks you for your help.

Without using SubReport or SQL Command in Main Report, get desired results without duplicating

It seems so simple. I just need the cost, at a certain time (based on a parameter), for each item. I wrote a SQL Command that works beautifully, but when it connects to the existing report, it slows to a horrible crawl and cannot be used for tables with over 4 million records. Here is the SQL Command that provides the desired results:
SELECT TOP 1 WITH TIES "INVENTITEMPRICE"."ITEMID", "INVENTITEMPRICE"."PRICETYPE", "INVENTITEMPRICE"."MARKUP", "INVENTITEMPRICE"."PRICEUNIT", "INVENTITEMPRICE"."PRICE", "INVENTITEMPRICE"."PRICEQTY", "INVENTITEMPRICE"."ACTIVATIONDATE", "INVENTITEMPRICE"."DATAAREAID"
FROM ("AX09PROD"."dbo"."INVENTITEMPRICE" "INVENTITEMPRICE" INNER JOIN "AX09PROD"."dbo"."INVENTTABLE" "INVENTTABLE" ON (("INVENTITEMPRICE"."ITEMID"="INVENTTABLE"."ITEMID") AND ("INVENTITEMPRICE"."DATAAREAID"="INVENTTABLE"."DATAAREAID")))
WHERE ("INVENTITEMPRICE"."DATAAREAID"=N'TMC' AND "INVENTITEMPRICE"."PRICETYPE"=0 AND "INVENTITEMPRICE"."ACTIVATIONDATE"<={?As Of Date})
ORDER BY ROW_NUMBER () OVER(PARTITION BY "INVENTITEMPRICE"."ITEMID" ORDER BY "INVENTITEMPRICE"."ACTIVATIONDATE" DESC)
I've attached the report with saved data. However, when I remove the restrictions of just certain items, it is unusable as it is SO SLOW!
I can also get the desired results from using a subreport but it takes forever to export due to the number of records/items. Whenever possible, I avoid subreports for this reason. I've attached that report with data as well.
Please be patient as I'm not savvy in SQL, but decent in generating reports. What am I doing wrong? This seems SO simple. The premise is that I want the corresponding information based on the date entered: If the date entered is 3/15/2014, the result should be 91.15 as indicated below. I'd simply like this value to be placed in a formula per item.
Item 80014:
Activation Date
Cost Price
6/2/2014
104.43
4/1/2014
91.58
3/1/2014
91.15
2/1/2014
92.89
1/1/2014
93.57
Any assistance would be GREATLY appreciated!
Thanks!
Teena
Update: I was unable to attach the reports with .rpt or .txt extensions. There were well under 1MB. Any suggestions?

hi Teena,
if you're going the inline subquery route, try something like the following...the last line in the sub-query 'where' clause should in theory take care of matching the correct price based on relating the item id's between your cost price & inventory data. this should leave you with distinct values for each itemid then. hopefully it won't error out as i'm just guessing on the syntax.
SELECT DISTINCT
"INVENTTABLE"."ITEMID",
"INVENTTRANS"."DATAAREAID",
"INVENTTRANS"."DATEPHYSICAL",
"INVENTTRANS"."QTY",
"INVENTTABLE"."ITEMGROUPID",
"INVENTTABLE"."ITEMNAME",
"INVENTTRANS"."TRANSREFID",
"INVENTTRANS"."STATUSISSUE",
"INVENTTABLE"."ITEMTYPE",
"INVENTTRANS"."TRANSTYPE",
"INVENTTRANS"."RECID",
"INVENTTRANS"."DIRECTION",
SELECT TOP 1 "INVENTITEMPRICE"."PRICE"
FROM "AX09PROD"."dbo"."INVENTITEMPRICE" "INVENTITEMPRICE"
WHERE "INVENTITEMPRICE"."DATAAREAID" LIKE 'TMC%'
AND "INVENTITEMPRICE"."PRICETYPE"=0
AND "INVENTITEMPRICE"."ACTIVATIONDATE"<={?As Of Date}
AND "INVENTITEMPRICE"."ITEMID" = "INVENTTABLE"."ITEMID"
ORDER BY "INVENTITEMPRICE"."ACTIVATIONDATE" DESC
) AS ITEMPRICE
FROM
"AX09PROD"."dbo"."INVENTTABLE" "INVENTTABLE"
LEFT OUTER JOIN "AX09PROD"."dbo"."INVENTTRANS" "INVENTTRANS"
ON ("INVENTTABLE"."DATAAREAID"="INVENTTRANS"."DATAAREAID")
AND ("INVENTTABLE"."ITEMID"="INVENTTRANS"."ITEMID")
WHERE
"INVENTTRANS"."DATAAREAID" LIKE 'TMC%'
AND (("INVENTTABLE"."ITEMGROUPID" LIKE 'RAW%') OR ("INVENTTABLE"."ITEMGROUPID" BETWEEN '000' AND '999') OR ("INVENTTABLE"."ITEMGROUPID" LIKE 'Ship_Box'))
AND "INVENTTABLE"."ITEMTYPE" IN (0,1)
ORDER BY
"INVENTTABLE"."ITEMGROUPID",
"INVENTTABLE"."ITEMID",
"INVENTTRANS"."DATEPHYSICAL" ASC
Message was edited by: Jamie Wiseman

How can I search multiple columns in a SQL command of Union tables

Hi:
We have a database with tables that are nearly identical that we use for production and production history.
I have created an SQL command in Crystal 2008 to joins several of the tables and then added a "UNION" to connect the History and Prod tables.
I need to search multiple (3 total) columns for 5 different data types, to return the records being investigated. I tried this using an "OR" statement in the where clause and have had inconsistant results.
The first two or statement function perfectly the third works as long as the value being passed is numeric and the last two fail consistantly with invalid column name errors. It appears that crystal is getting confused and passing the wrong data type especially if I do a new search using a different option for the "?SearchParam"
Can some one offer some insite on how I can search these fields to return the record data needed
-- {?SearchParam} is the search parameter passed by Crystal that is a number 1 thru 5
-- {?Search_Val} is a parameter that is passed by Crystal that is a string of what to search for 1 = Numeric CMP ord #("TBSLI21"."LI21_OR_NO"), 2 = Numeric CI ord # ( "TBSLI33"."LI33_CI_OR_NO"),
--   3 =String Ext Sys ord string ("TBSLI33"."LI33_EXT_SYS_SL_OR_NO"), 4 = String CMP Grp string ("TBSLI21"."LI21_OP_GRP_NO"), 5 = composit string PP ord string ("TBSOP13"."OP13_CLR_DAY" & "TBSOP13"."OP13_PP_GRP_SEQ_NO" & "TBSOP13"."OP13_CELL_ID")
SELECT "TBSLI21"."LI21_OR_NO",
"TBSLI21"."LI21_SH_DT_SCDL",
"TBSLI21"."LI21_TS_EN_ORIG",
"TBSLI21"."LI21_TS_SHIP",
"TBSLI21"."LI21_SYS_ORD_CD",
"TBSLI21"."LI21_SHIP_ID",
"TBSLI21"."LI21_WRKST_ID",
"TBSLI21"."LI21_LI_NO",
"TBSLI33"."LI33_CI_OR_NO",
"TBSLI33"."LI33_EXT_SYS_SL_OR_NO",
"TBSLI21"."LI21_OP_GRP_NO",
"TBSLI21"."LI21_LI_STAT",
"TBSOP13"."OP13_OP_GRP_STAT",
"TBSLI31"."LI31_LI_EV_DTL_TX",
"TBSLI31"."LI31_DT_EN",
"TBSLI31"."LI31_TM_EN",
"TBSLI31"."LI31_LI_EV",
"TBSLI21"."LI21_OP_WSH_FLNM",
"TBSLI21"."LI21_PR_ITF_CD",
"TBSLI21"."MFG_PLANT_CD",
"MFG_PLANT_LI"."MFG_PLANT_CD" as PrefPlant,
"TBSOP13"."OP13_OP_GRP_DSP_CD",
"TBSLI21"."LI21_LI_DSP_CD",
"TBSOP13"."OP13_CLR_DAY",
"TBSOP13"."OP13_PP_GRP_SEQ_NO",
"TBSOP13"."OP13_CELL_ID",
"MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG",
"TBSLI21"."LI21_OP_GRP_PS_NO1",
"TBSLI21"."LI21_POMS_MERGE_NO",
"TBSLI31"."LI31_OP_ID",
"TBSLI21"."LI21_LI_POR_FG",
"TBSLI21"."LI21_BIN_ID",
"TBSLI21"."LI21_TS_MRSHL",
"TBSLI33"."LI33_CI_LI_NO",
"TBSLI33"."LI33_SH_ADDR_1",
"TBSLI33"."LI33_SH_ADDR_2",
"TBSLI33"."LI33_SH_ADDR_3",
"TBSLI33"."LI33_SH_ADDR_4",
"TBSLI33"."LI33_SH_CITY_NM",
"TBSLI33"."LI33_SH_ST_NM",
"TBSLI33"."LI33_SH_ZIP_CD",
"TBSLI33"."LI33_CU_NM",
"TBSLI33"."LI33_CU_BUS_NM"
FROM   ((("CMPREPORTING"."dbo"."TBSLI33" "TBSLI33" FULL OUTER JOIN "CMPREPORTING"."dbo"."TBSLI21" "TBSLI21" ON ("TBSLI33"."LI33_BS_OR_NO"="TBSLI21"."LI21_OR_NO") AND ("TBSLI33"."LI33_BS_LI_NO"="TBSLI21"."LI21_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSOP13" "TBSOP13" ON "TBSLI21"."LI21_OP_GRP_NO"="TBSOP13"."OP13_OP_GRP_NO") LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSLI31" "TBSLI31" ON ("TBSLI21"."LI21_OR_NO"="TBSLI31"."LI31_OR_NO") AND ("TBSLI21"."LI21_LI_NO"="TBSLI31"."LI31_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."MFG_PLANT_LI" "MFG_PLANT_LI" ON ("TBSLI21"."LI21_OR_NO"="MFG_PLANT_LI"."OR_NO") AND ("TBSLI21"."LI21_LI_NO"="MFG_PLANT_LI"."LI_NO")
WHERE   {?aSearchParam} = 1 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI21"."LI21_OR_NO"=Cast( {?Search_Val} as Int)
or {?aSearchParam} = 2 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI33"."LI33_CI_OR_NO"=Cast( {?Search_Val} as numeric(12,0))
or {?aSearchParam} = 3 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(20),"TBSLI33"."LI33_EXT_SYS_SL_OR_NO")= Convert( VarChar(20), {?Search_Val})
or {?aSearchParam} = 4 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8),"TBSLI21"."LI21_OP_GRP_NO") = Convert( VarChar(8), {?GroupNo})
or {?aSearchParam} = 5 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8), ("TBSOP13"."OP13_CLR_DAY" & "TBSOP13"."OP13_PP_GRP_SEQ_NO" & "TBSOP13"."OP13_CELL_ID")) = Convert( VarChar(8), {?GroupNo})
Union
SELECT "TBSLI21_HIST"."LI21_OR_NO",
"TBSLI21_HIST"."LI21_SH_DT_SCDL",
"TBSLI21_HIST"."LI21_TS_EN_ORIG",
"TBSLI21_HIST"."LI21_TS_SHIP",
"TBSLI21_HIST"."LI21_SYS_ORD_CD",
"TBSLI21_HIST"."LI21_SHIP_ID",
"TBSLI21_HIST"."LI21_WRKST_ID",
"TBSLI21_HIST"."LI21_LI_NO",
"TBSLI33_HIST"."LI33_CI_OR_NO",
"TBSLI33_HIST"."LI33_EXT_SYS_SL_OR_NO",
"TBSLI21_HIST"."LI21_OP_GRP_NO",
"TBSLI21_HIST"."LI21_LI_STAT",
"TBSOP13_HIST"."OP13_OP_GRP_STAT",
"TBSLI31_HIST"."LI31_LI_EV_DTL_TX",
"TBSLI31_HIST"."LI31_DT_EN",
"TBSLI31_HIST"."LI31_TM_EN",
"TBSLI31_HIST"."LI31_LI_EV",
"TBSLI21_HIST"."LI21_OP_WSH_FLNM",
"TBSLI21_HIST"."LI21_PR_ITF_CD",
"TBSLI21_HIST"."MFG_PLANT_CD",
"MFG_PLANT_LI_HIST"."MFG_PLANT_CD",
"TBSOP13_HIST"."OP13_OP_GRP_DSP_CD",
"TBSLI21_HIST"."LI21_LI_DSP_CD",
"TBSOP13_HIST"."OP13_CLR_DAY",
"TBSOP13_HIST"."OP13_PP_GRP_SEQ_NO",
"TBSOP13_HIST"."OP13_CELL_ID",
"MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG",
"TBSLI21_HIST"."LI21_OP_GRP_PS_NO1",
"TBSLI21_HIST"."LI21_POMS_MERGE_NO",
"TBSLI31_HIST"."LI31_OP_ID",
"TBSLI21_HIST"."LI21_LI_POR_FG",
"TBSLI21_HIST"."LI21_BIN_ID",
"TBSLI21_HIST"."LI21_TS_MRSHL",
"TBSLI33_HIST"."LI33_CI_LI_NO",
"TBSLI33_HIST"."LI33_SH_ADDR_1",
"TBSLI33_HIST"."LI33_SH_ADDR_2",
"TBSLI33_HIST"."LI33_SH_ADDR_3",
"TBSLI33_HIST"."LI33_SH_ADDR_4",
"TBSLI33_HIST"."LI33_SH_CITY_NM",
"TBSLI33_HIST"."LI33_SH_ST_NM",
"TBSLI33_HIST"."LI33_SH_ZIP_CD",
"TBSLI33_HIST"."LI33_CU_NM",
"TBSLI33_HIST"."LI33_CU_BUS_NM"
FROM   ((("CMPREPORTING"."dbo"."TBSLI33_HIST" "TBSLI33_HIST" FULL OUTER JOIN "CMPREPORTING"."dbo"."TBSLI21_HIST" "TBSLI21_HIST" ON ("TBSLI33_HIST"."LI33_BS_OR_NO"="TBSLI21_HIST"."LI21_OR_NO") AND ("TBSLI33_HIST"."LI33_BS_LI_NO"="TBSLI21_HIST"."LI21_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSOP13_HIST" "TBSOP13_HIST" ON "TBSLI21_HIST"."LI21_OP_GRP_NO"="TBSOP13_HIST"."OP13_OP_GRP_NO") LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSLI31_HIST" "TBSLI31_HIST" ON ("TBSLI21_HIST"."LI21_OR_NO"="TBSLI31_HIST"."LI31_OR_NO") AND ("TBSLI21_HIST"."LI21_LI_NO"="TBSLI31_HIST"."LI31_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."MFG_PLANT_LI_HIST" "MFG_PLANT_LI_HIST" ON ("TBSLI21_HIST"."LI21_OR_NO"="MFG_PLANT_LI_HIST"."OR_NO") AND ("TBSLI21_HIST"."LI21_LI_NO"="MFG_PLANT_LI_HIST"."LI_NO")
WHERE {?aSearchParam} = 1 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI21_HIST"."LI21_OR_NO"= Cast( {?Search_Val} as Int)
or {?aSearchParam} = 2 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI33_HIST"."LI33_CI_OR_NO"= Cast( {?Search_Val} as numeric(12,0))
or {?aSearchParam} = 3 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(20), "TBSLI33_HIST"."LI33_EXT_SYS_SL_OR_NO")= Convert( VarChar(20),{?Search_Val})
or {?aSearchParam} = 4 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8),"TBSLI21_HIST"."LI21_OP_GRP_NO")= Convert( VarChar(8), {?GroupNo} )
or {?aSearchParam} = 5 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8), ("TBSOP13_HIST"."OP13_CLR_DAY" & "TBSOP13_HIST"."OP13_PP_GRP_SEQ_NO" & "TBSOP13_HIST"."OP13_CELL_ID")) = Convert( VarChar(8), {?GroupNo})

This is actually a fairly easy fix - because of the way the "OR" works in SQL, you need to surround each "set" of statements in the or with parentheses. So, it would look something like this:
Where
({?aSearchParam} = 1 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI21"."LI21_OR_NO"=Cast( {?Search_Val} as Int))
or
({?aSearchParam} = 2 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI33"."LI33_CI_OR_NO"=Cast( {?Search_Val} as numeric(12,0)))
or
({?aSearchParam} = 3 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(20),"TBSLI33"."LI33_EXT_SYS_SL_OR_NO")= Convert( VarChar(20), {?Search_Val}))
or
({?aSearchParam} = 4 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8),"TBSLI21"."LI21_OP_GRP_NO") = Convert( VarChar(8), {?GroupNo}))
or
({?aSearchParam} = 5 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8), ("TBSOP13"."OP13_CLR_DAY" & "TBSOP13"."OP13_PP_GRP_SEQ_NO" & "TBSOP13"."OP13_CELL_ID")) = Convert( VarChar(8), {?GroupNo}))
-Dell

How to execute stored procedure in the SQL Commands page

i'm oracle express edition newbie :) i have this stored procedure. it not belong to a package.
create or replace procedure "LIST_MEMBERS"
("MEMBER_CUR" OUT SYS_REFCURSOR)
is
begin
OPEN MEMBER_CUR FOR
SELECT * FROM members;
end;
now, in the SQL Commands page, how to run the stored procedure and return the records. i do this:
begin
execute list_members();
end;
but i'm getting some errors. just need some immediate help :) thanks!!!

Example of using a ref cursor:
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure open_cur(c IN OUT SYS_REFCURSOR) is
2 begin
3    open c for 'select rownum rn from dual connect by rownum <= 10';
4* end;
SQL> /
Procedure created.
SQL> ed
Wrote file afiedt.buf
1 declare
2    c     SYS_REFCURSOR;
3    v_val NUMBER;
4 begin
5    open_cur(c);
6    loop
7      fetch c INTO v_val;
8      exit WHEN c%NOTFOUND;
9      dbms_output.put_line(v_val);
10    end loop;
11    close c;
12* end;
SQL> /
1
2
3
4
5
6
7
8
9
10
PL/SQL procedure successfully completed.
SQL>

ODBC - SQL command on connect

Similar Messages

Maybe you are looking for