Odd lockup using Bluetooth to get to Web with a Treo 700p

Getting to the web with my Verizon Treo 700p is better with Leopard than it was with Tiger. (For instructions on how to do this see http://blogs.zdnet.com/Apple/?p=215) However I do get odd behavior. If the connection is lost (not sure if it the blutetooth or the web connection) and I attempt to reconnect, sometimes the "Connecting" in the title bar starts to scroll left to right and freezes. The fan on the MacBook starts to crank up and the machine is minimally responsive. I could not quit any apps. Could not even force quit. Oddly, turning off bluetooth on the phone gave me control of the Mac back. I thought I would mention this in case any one else has seen this and if there should be a fix in the works by someone. It is odd that a bluetooth device can have this level of control over the computer.

Thought I should resolve this one. Seems I needed to upgrade the OS on the Treo. Apparently there was a minor release which fixed the issue (so minor that the only change in the version number is an underscore!) Works much better since the treo upgrade.

Similar Messages

Can I use Bluetooth to pair my iPad with a 2013 Chevrolet Equinox

Can I use Bluetooth to pair my iPad with a 2013 Chevrolet Equinox?

Yes if your Equinox head unit supports the Bluetooth A2DP (Stereo Bluetooth) protocol.

I can't use Bluetooth, USB or Wi-Fi with Galaxy Tab3

I have Mavericks on my MacBook and find I can't transfer files to my new Galaxy Tab3 using Bluetooth, the USB cable or Wi-Fi or Samsung's Kies programme. Is there some other way? As the Galaxy does not have a CD drive how do I get music on it without buying everything again?

When you say it doesn't detect the network - is that under "Settings->Wi-Fi"? It doesn't show your network at all?
This may sound like a stupid question but since I've learned never to leave any stone unturned - you don't have your SSID set to "hidden" do you?

IMac Pairs with iMac Using Bluetooth: Mouse Gets Whacked

Among the many problems I've noted after upgrading to Yosemite is that one of the two iMacs I have in close proximity to each other tries to connect via Bluetooth to the other one. When this happens the mouse on the iMac that is trying (or is) connected to the other iMac starts getting whacked out. If I click on the Bluetooth icon, it will show the other iMac, mouse, keyboard as connected bluetooth devices. If I click on DISCONNECT for the connected iMac, the mouse starts acting normal until the machine decides to try to reconnect to the other iMac. I've tried the following with no change in the problem:
Baremetal install of Yosemite on the iMac that keeps trying to connect to the other one
Making sure Bluetooth sharing is unchecked in the SHARING part of setup (both machines)
Resetting PRAM/SMC
Wi-Fi is off on both machines BTW
Anyone have any ideas? This is getting old.

"Allen's iMac" is the one with the problem.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. If the problem is solved, recreate your settings in the Bluetooth preference pane, including all pairings. Otherwise, you can restore the file you deleted from the backup. Post your results.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Using overdrive to get library books with OS2 on playbook

I can find the book I want at my library and the program says that I have downloaded it. But I can't find it anywhere. Looked for it in the overdrive app but it's not there. Yesterday. I did find it somewhere (can't find it today). Yesterday When I tried to open it I got an error msg. Help!!

Swipe down, and select "get books"
Select your library
Select "my account"
Sign in using your library card
Select "my checkouts"
Everything you currently have checked out will be listed, available to download (mp3 and ebooks).
Once you have downloaded them in the Overdrive app, they will be available to read during the checkout time.
@}-`-,--
Web Development and Technical Services Librarian

Nokia 6111 how do i use bluetooth

hi i am new to bluetooth i was just wondering if anyone knew how to use bluetooth to get into my boyfriends phone and see his pics and downloads etc he can do this with his ohinew whcih is a completely different model but i just wondered how to do it with mine could anyone help me please

Nokia phones do not support that kind of access. There might be third party software that does it but I hope not.

Error 80 when using bluetooth on car radio

error 80 when using bluetooth on pioneer car radio with my iphone 4 and 5

me too...did some digging on the internet and appears Error -80 means the car deck is expecting some bluetooth protocols that your iPhones wont give out. mine was intermittent for last couple years (deck is 12 years old) as of last night i just get error -80 everytime i try to dial out or recieve a call via bluetooth. this issue was intermittent with an iPhone 3G, 4, 4S, 5 and now my current 5S. im blaming Pioneer not Apple for this
I ended up buying a new deck for my car...gets installed tomorrow.

Bluetooth Dialing in Address Book with Treo 650

Hi,
I've been trying to use Address book to dial numbers with my Treo 650 via bluetooth. Thus far, I have not succeeded. Does anyone know if this is even posssible with the 650? My phone connects to my PowerBook G4 without problems. However, when I hit the bluetooth button in Address Book, my phone comes alive and looks like it's making a connection, but nothing ever comes of it. When I try to hit the "Dial with cell phone" function in AB after the attempted pairing, it's grayed-out and in accessible. Anyone have any advice on how to fix the problem?
Thanks,
B
Al PowerBook G4 Mac OS X (10.4.8)

Most times this is a Bluetooth/phone compatability issue, rather than an Address Book problem. Try reposting on the Bluetooth page for your particular computer. Look in the Computer Hardware section in the top left corner of the discussions home page.
AK

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

My iPad pairs using Bluetooth with my android phone but I ca't get it to connect

i can get my iPad to pair using Bluetooth with my android phone but I can't get it to connect

What are you trying to accomplish by pairing them? File transfer over BT is not supported.

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Get the web name using web id in sharepoint

Hi,
I have a web id.I want to get the web name.
can someone provide the code for it?

you loop through the webs in you site collection and get the title of web once it matches with GUID.
using (SPSite site = new SPSite("http://sp13devserver/"))
SPWebCollection webcoll = site.AllWebs;
foreach (SPWeb web in webcoll)
if (web.ID.ToString() == "70c2c799-9154-4c46-b9a0-943fbbf67639")
Console.Write(web.Title.ToString());
Console.Read();
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

I get an "Error Encountered" message from Semantec when I use Firefox to visit any web-site. What is wrong with Firefox?

Even now while visiting support.mozilla.com, I get an "Error Encountered" message from Symantec. I don't get this message from Safari.
Symantec suggests that I support the site to Symantec, but it is every web site I visit using Firefox.
What's wrong with Firefox? on the Mac?

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). 
You can find the IDs of the submitted crash reports on the about:crashes page. 
You can open the about:crashes page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
*https://support.mozilla.com/kb/Mozilla+Crash+Reporter

Help using JMX to Get Context of Deployed Web Apps

I think this question is more of a JMX question that anything else (like a JNDI question), so I am posting here. If anyone feels this should be posted elsewhere, please let me know.
I want to be able to get a handle to each deployed web app's context, so that I may get a BasicDataSource from it, then look at the connection attributes inside of that BasicDataSource, i.e., Number of active connections, number of idle connections, etc. for each deployed web app.
This is the path I am heading down (if there is another way, please let me know). The code below is inside of a JSP running inside of a web app within my Tomcat 5.0.16 server, running JDK 1.4.2.
Here is the entire JSP...
<%@ page import="org.apache.commons.dbcp.BasicDataSource,
 javax.naming.InitialContext,
 javax.naming.Context,
 javax.management.ObjectName,
 javax.management.MBeanServer,
 java.util.Set,
 org.apache.catalina.mbeans.MBeanUtils,
 java.util.Iterator,
 javax.management.ObjectInstance,
 org.apache.catalina.core.StandardContext"%>
<html>
 <head>
 <meta http-equiv="refresh" content="3"> 
 </head>
 <body>
<%
 //InitialContext ctx = new InitialContext();
 //Context envCtx = (Context) ctx.lookup("java:comp/env");
 String dsName = "";//"jdbc/raptor";
 String appName = "";//(String) envCtx.lookup("appName");
 BasicDataSource ds = null;//(BasicDataSource) envCtx.lookup(dsName);
 MBeanServer mBeanServer = MBeanUtils.createServer();
 ObjectName oname = new ObjectName("*:j2eeType=WebModule,*");
 Set contexts = mBeanServer.queryMBeans(oname, null);
 Iterator it = contexts.iterator();
 while(it.hasNext()) {
 ObjectInstance oi = (ObjectInstance)it.next();
 ObjectName cname = oi.getObjectName();
 System.out.println(">>> cname = " + cname.toString()); // this prints something like this: Catalina:j2eeType=WebModule,name=//localhost/accesstracker,J2EEApplication=none,J2EEServer=none
 Is this the right way to do this??? I seem to be getting the web app, I just want to be able to
 get a handle to that web app's context, get a BasicDataSource from it, then look at the connection
 attributes inside of that BasicDataSource, i.e., Number of active connections, number of idle
 connections, etc. for each deployed web app
 //javax.naming.Context iCtx = (javax.naming.Context) mBeanServer.invoke(cname, "findStaticResources", null, null); // will this do it???
 Object obj = new InitialContext().lookup("java:comp/env"); // this only gets the current context (the web app I'm currently in)
 if(obj != null){
 Context envCtx = (Context) obj;
 appName = (String) envCtx.lookup("appName");
 ds = (BasicDataSource) envCtx.lookup("jdbc/raptor");
 }else{
 System.out.println("obj is null");
%> <%=cname.toString()%> 
 Application name: <%=appName%> 
 Number of Active Connections = <%=ds.getNumActive()%>
 
 Number of Idle Connections = <%=ds.getNumIdle()%>
 
 Initial Size of Pool = <%=ds.getInitialSize()%>
 
 Maximum Number of Active Connections = <%=ds.getMaxActive()%>
 
<%
%>
 </body>
</html>The above JSP will output all of the info for each deployed web app, however, when it gets to getting the Context of the web app, it simply outputs information repeatedly for the web app this JSP is in (which makes sense since I'm using InitialContext).
I appreciate any help anyone could provide.
Thank you

If you want your application to work only with specific JRE version, you should use static versioning. I installed JRE 1.3.1_15 and JRE 5.0U5 , both of them works successfully. I used the below syntax to load applets:
for 1.3.1_15:
<object
 classid = "clsid:CAFEEFAC-0013-0001-0015-ABCDEFFEDCBA"
 codebase = "http://java.sun.com/products/plugin/autodl/jinstall-1_3_1_15-windows-i586.cab#Version=1,3,1,15"
 WIDTH = 150 HEIGHT = 25 >
 <PARAM NAME = CODE VALUE = "HelloWorld.class" >
 <param name = "type" value = "application/x-java-applet;jpi-version=1.3.1_15">
 <param name = "scriptable" value = "false">
 <comment>
 <embed
 type = "application/x-java-applet;jpi-version=1.3.1_15" \
 CODE = "HelloWorld.class" \
 WIDTH = 150 \
 HEIGHT = 25
 scriptable = false
 pluginspage = "http://java.sun.com/products/plugin/index.html#download">
 <noembed>
 </noembed>
 </embed>
 </comment>
</object>for 5.0U5
<object
 classid = "clsid:CAFEEFAC-0015-0000-0005-ABCDEFFEDCBA"
 codebase = "http://java.sun.com/update/1.5.0/jinstall-1_5_0-windows-i586.cab#Version=1,5,0,5"
 WIDTH = 150 HEIGHT = 25 >
 <PARAM NAME = CODE VALUE = "HelloWorld.class" >
 <param name = "type" value = "application/x-java-applet;jpi-version=1.5.0_05">
 <param name = "scriptable" value = "false">
 <comment>
 <embed
 type = "application/x-java-applet;jpi-version=1.5.0_05" \
 CODE = "HelloWorld.class" \
 WIDTH = 150 \
 HEIGHT = 25
 scriptable = false
 pluginspage = "http://java.sun.com/products/plugin/index.html#download">
 <noembed>
 </noembed>
 </embed>
 </comment>
</object>- Mike

After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.

After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.

ChrisJ4203, I just tried that and magic...back up and running. Thank you from Wildwatercolors.

Odd lockup using Bluetooth to get to Web with a Treo 700p

Similar Messages

Maybe you are looking for