Odi os call with option parameter from odi procedure

Hi.
I am calling a shell script from ODI as below inside an ODI procedure P1. The os command below is in 'Command on Target' side.I have defined v_in_param as an 'option' inside procedure P1
OdiOSCommand sample.sh v_in_param
i am getting error as 'OS command returned 1'.
Is it the right syntax to pass an 'option' parameter to an OS call?
thanks

you can try OdiOSCommand sh sample.sh <%=odiRef.getOption("v_in_param")%> or even call OS Command in ODI Package and paste the above code.

Similar Messages

Calling Oracle Stored procedure with OUT parameter from ODI

Hi,
I called an oracle stored procedure with following anonymous block in the ODI procedure.
Declare
Status varchar2(10);
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', Status);
End;
I want to capture the OUT parameter STATUS value in a project level variable.
And based on its va;lue I would like to choose between 2 interfaces in my package.
Please help me in doing this.

Hi,
For that kind of situation I commoly use:
1) one step with:
create or replace package <%=odiRef.getSchemaName("W")%>.pck_var
Status varchar2(10);
end;
* transaction 9, for instance
2) step
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', <%=odiRef.getSchemaName("W")%>.pck_var.Status);
End;
* transaction 9
3) then, at an ODI variable, use a refresh like:
select <%=odiRef.getSchemaName("W")%>.pck_var.Status from dual
at same logical shema where the package was created.
Does it make sense to you?

Crystal Report with Optional Parameters from Stored Procedure

I have a client who created a Crystal Report. This report is linked to a Stored Procedure which allows for input on two criteria. Both of these critera are static values. However, the second of these parameters is setup to allow the user to enter up to 20 values. For example, the Stored Procedure needs the CARDCODE, and a set of DOCUMENTS. So the parameters/prompts would look like this...
BP CardCode:
Document1:
Document2:
Document3:
...etc...
The report will just display basic document information for those documents that were entered.
With 8.8, these parameters were changed to be REQUIRED.... not OPTIONAL. According to SAP note 1500777, this is a known bug and will be fixed in future versions. This note also states to change the criteria for the filter. However, when using a Stored Procedure, this does not appear to be an option, as the selection is defined by the data connection (and the parameters defined in the SP).
Am I missing something? Is there a way to make the suggetion in the above note work with my Stored Procedure?
Or, is there another way to make these parameters optional? (Do I need to change the SP?)
Thanks!
~ terry.

I have a client who created a Crystal Report. This report is linked to a Stored Procedure which allows for input on two criteria. Both of these critera are static values. However, the second of these parameters is setup to allow the user to enter up to 20 values. For example, the Stored Procedure needs the CARDCODE, and a set of DOCUMENTS. So the parameters/prompts would look like this...
BP CardCode:
Document1:
Document2:
Document3:
...etc...
The report will just display basic document information for those documents that were entered.
With 8.8, these parameters were changed to be REQUIRED.... not OPTIONAL. According to SAP note 1500777, this is a known bug and will be fixed in future versions. This note also states to change the criteria for the filter. However, when using a Stored Procedure, this does not appear to be an option, as the selection is defined by the data connection (and the parameters defined in the SP).
Am I missing something? Is there a way to make the suggetion in the above note work with my Stored Procedure?
Or, is there another way to make these parameters optional? (Do I need to change the SP?)
Thanks!
~ terry.

Calling UNIX shell script from ODI package?

Hi,
How Can we call UNIX shell script from ODI package?
I have a ftp_ss.sh script which which ftps a file from remote server to local server, archives the last file and renames new file to the standard (ie file data store)name.
I want to run the above script and interfaces from a package.
Any help is greately appreciated.
Thanks,
RD

In the package window, put "OS Command" from the toolbox.
Provide the command parameters to this tool in form of "/path/to/script/ftp_ss.sh"

Search Results web part - Custom Query using "Value with a parameter from URL" inconsistent

I have encountered what I think may be a bug, but I am hoping that there is something that I am missing.
Within my search site, I have created a new search results page where I want to customize the "Search Results" web part query. I can add in any number of property and keyword filters (using the "Build Your Query" dialog) without
issue... until I add a filter that uses the QueryString property (the builder dialog calls this "Value with a parameter from URL").
If I use {QueryString.MyParameterX} for filtering, it works beautifully in the query builder dialog. I see the expected results in the search results preview pane, but as soon as I apply the changes things become inconsistent.
If I close/reopen my browser and navigate to my page at http://myaddress/search/Pages/testresults.aspx?MyParameterX=test I see results. If I then refresh the page, I get a "Nothing here matches your search" message. I can then go to
the same address but change one character to an uppercase character and get results. Refreshing that same page again returns "Nothing here matches your search". I can only get search results one time per uniquely cased URL without having
to close/reopen my browser. This behavior was seen on both Firefox and IE.
Finally, I found that if I instead navigate to http://myaddress/search/testresults?MyParameterX=test, it always returns results. This, unfortunately isn't the best solution for me... but it is a solution.
Any insight that anyone can provide is greatly appreciated! I would really like to be able to depend on this working in all logical cases (especially since the search center of other sites is set using the path all the way down to /Pages).
Thanks!

Hi, have you been able to solve this issue? I'm getting the same issue and I cant solve it (required CU is installed).
Fabio

Feature NUMAP was called with incorrect parameter value PME15

hi
i am getting following error while running transaction pb10.
Feature NUMAP was called with incorrect parameter value PME15
please help me out.
regards
archana

this might be occur in case there is mismatch of the fields of decision being used in feature maintenance.
check the feature and the return value , wether the return value is correct or not
goto PE03->NUMAP check the return value and check wether the return was configured in number ranges
eg: if the return value is 01 go to your config and check the number range has been set for "01"
you gave return value as "01" and the number range has not been set in configuaration for "01" this kind of error s may occur.
Edited by: Piscian . on Jul 18, 2011 11:54 AM

Issue when calling with Facetime video from iphone 6 to iphone 4

Hello,
I am trying to call with facetime video from my iphone 6 (ios 8.0.2) to an iphone 4 (ios 7.1.2) but it doesn't work. It works when I use facetime audio but not the video. I have tried to use my ipad 2 (ios 8.0.2) instead of the iphone 6 and I am experiencing the same problem. Can you please help me out here?
Thnaks!

The iPhone 4 would have to be on wifi for the video to come through, I think. Is the person with the iPhone 4 on wifi?
Can that person receive calls from anyone else using Facetime?
~Lyssa

Passing select option parameter to a procedure

Hello, i need to know pass a select option parameter to a procedure. I tried the following
For eg if i have a select option called so_belnr & i call the procedure using the following
PERFORM VALIDATE_DOCUMENT TABLES SO_BELNR USING GJAHR BUKRS , i still cannot use the
select option paramter in the called procedure.
Pls help.

Hi,
in topinclude...
data: lr_belnr type RNG_BELNR.
at start-of-sel.....
move so to range..
refresh: lr_belnr.
lr_belnr[] = so_belnr[].
PERFORM VALIDATE_DOCUMENT TABLES lr_belnr USING GJAHR BUKRS .
in form:
... tables lr_belnr like structure of RNG_BELNR.
reason(my definietion): perfom doesn´t know if the select-options is availible.....
bestreg
Robert

Calling a shell script from ODI tool OS command

hi,
I am trying to call a shell script from the ODI tool OS command with the following command "sh /Oracle/ODI/backlog.sh"
where "backlog.sh" is the name of the shell script. I am redirecting the output of the script to a file called "backlog.out" and this part is done in the script itself.The ODI session is successful and the output file i.e "backlog.out" gets created in the specified location but the output of the script doesnot get written to this output file.Is this the right way of calling the shell script using ODI OS command.

Hi-
It seems there is no input parameters for your script. Please check your script file needs any input parameters and try the syntax below:
path/scriptname.sh input1 input2
where input1 and 2 are input parameters for the script file which you are calling.
Hope this will work for you.
Thanks,
Saravanan Rajavel

How to use mathscript node in server side with the parameter from the client side

I tried to develop a server/client system with some algorithms written in matlab. So I included a mathscript node on the server side. The client will send the parameter to the server. According to these parameters, the sever will call the matlab functions to do some computings and then send the results back to the client. The server has to wait for all parameters received before the computings. How do I know this since I only connect the parameter variables to the inputs of mathscript node on the server. The sever cannot know whethere these parameters are the new ones or old ones since the client may send parameters multiple times?

It seems to me you have two perfectly good options to start with. You could send all possible parameters in a single packet from the client to the server. This could be in the form of a cluster or an array of values. If by server/client you mean you are sending data over the network, then you could flatten this data to string before sending and unflatten it on the other side. Since all parameters come in one packet, you know all the data is valid every time you send data.
The other option is to send the parameters individually, but include some extra information such as a timestamp or iteration count. The server keeps reading and storing parameter values until a packet arrives with the next timestamp. Alternatively, you could include some information such as an end-of-parameter-list boolean that is sent with every parameter. It would be false until the last parameter packet.
Give it a thought. There are lots of solutions.
Jarrod S.
National Instruments

Bind Operator to Function with optional parameter

Hi,
as mentioned in the subject, I would like to create an operator which is bind to an function with an optional parameter:
CREATE OR REPLACE FUNCTION
          TS_Base_Func(iobject IN CIBase, format IN VARCHAR2 DEFAULT NULL) RETURN VARCHAR2 IS
BEGIN
     RETURN interval_object.IntervalToString(format);
END TS_Base_Func;
I can bind the operator with a VARCHAR2 as second parameter, but how can I bind an operator without the second parameter to this function?
Thanks!

What about using a "wrapper" function to implement what you would like to do? Here is a small sample:
SQL> CREATE OR REPLACE FUNCTION TEST
2 (
3          A       IN VARCHAR2
4 ,       B       IN VARCHAR2     DEFAULT NULL
5 )
6 RETURN NUMBER
7 AS
8 BEGIN
9          IF A = B THEN
10                  RETURN 1;
11          ELSE
12                  RETURN 0;
13          END IF;
14 END;
15 /
Function created.
SQL> CREATE OR REPLACE FUNCTION TEST_WRAPPER
2 (
3          A       IN VARCHAR2
4 )
5 RETURN NUMBER
6 AS
7 BEGIN
8          RETURN TEST(A);
9 END;
10 /
Function created.
SQL> CREATE OR REPLACE OPERATOR TestOperator
2 BINDING (VARCHAR2)              RETURN NUMBER USING TEST_WRAPPER
3 ,       (VARCHAR2, VARCHAR2)    RETURN NUMBER USING TEST;
Operator created.
SQL> SELECT TestOperator(1) FROM DUAL;
TESTOPERATOR(1)
              0
SQL> SELECT TestOperator(1,2) FROM DUAL;
TESTOPERATOR(1,2)
                0
SQL> SELECT TestOperator(1,1) FROM DUAL;
TESTOPERATOR(1,1)
                1
SQL>The TEST_WRAPPER function has the signature you need for a one variable parameter. However, under the hood it calls the TEST function.

Dynamic Function Module call with table parameter?

Hi All,
I'm trying to call FMs dynamically with PARAMETER-TABLE. These FMs are mainly about searching data from inputs and returning internal table as outputs. I managed to pass data into import parameters as query conditions, but still failed to set tables parameter. The code is like below, could you please help me check what's the problem? Thank you very much!!
data: lv_val type RS38L_TYP value 'ls_service_para-fmparam'.
data: lt_interface TYPE rsfbintfv,
           ls_import_para TYPE rsfbpara,
           ptab TYPE abap_func_parmbind_tab,
           ptab_line TYPE abap_func_parmbind,
           ref_wa type ref to data.
Field-symbols: <fs> type any,
CALL METHOD cl_fb_function_utility=>meth_get_interface
       EXPORTING
         im_name             = LV_FM          "FM name
       IMPORTING
         ex_interface        = lt_interface
       EXCEPTIONS
         error_occured       = 1
         object_not_existing = 2
         OTHERS              = 3.
***loop IMPORT parameters and fill in data from lt_params***
loop at lt_interface-import into ls_import_para.
     read table lt_params into ls_param with key key = ls_import_para-parameter. "check if exists query value
    if sy-subrc = 0 and ls_param-value is not initial.
          assign (lv_val) to <fs>.
           <fs> = ls_param-value.
          create data ref_wa type (ls_import_para-STRUCTURE).
          assign ref_wa->* to <fs2>.
           <fs2> = <fs>. UNASSIGN: <fs>,<fs2>.
           ptab_line-name = ls_import_para-PARAMETER.
           ptab_line-value = ref_wa.
           ptab_line-kind = abap_func_exporting.
          insert ptab_line into table ptab.
     endif.
endloop.
***loop at TABLE parameters to retrieve data from FM***
loop at lt_interface-TABLES into ls_import_para.
     create data ref_wa type (ls_import_para-STRUCTURE).
      ptab_line-tables_wa = ref_wa.     "set data type
      ptab_line-name = ls_import_para-PARAMETER.
      ptab_line-kind = abap_func_tables.
     insert ptab_line into table ptab. "if commented, no exception occurs,but I cannot get any dataset.
endloop.
CALL FUNCTION LV_FM PARAMETER-TABLE ptab.
if I execute the code, when there has TABLES parameter defined in the FM, I get CX_SY_DYN_CALL_PARAM_MISSING exception with runtime error DATREF_NOT_ASSIGNED. But in debug mode, as shown in the screen shot attached, I did see the field TABLES_WA has correct type. So maybe I misunderstand the usage of PARAMETER-TABLE. Does anyone has experience on it?
Best Regards,
Jeff

Hi Rama,
Yes, I'm not passing value to the table parameter, but that parameter is where I want to retrieve data from FM, not pass value to, so I don't assign any value to ptab_line-value for that parameter.
BTW, I just did some test to pass value to the parameter using the following code and still got CALL_FUNCTION_PARM_MISSING exception:
FM: ZLEAD_CONTACT
parameters:
IMPORT: I_PARTNER TYPE BUT000-PARTNER mandatory
TABLES: OT_CONT LIKE ZLEAD_INFO_S optional (here ZLEAD_INFO_S is a flat structure)
ptab_line-name = ls_import_para-PARAMETER.
ptab_line-kind = abap_func_tables.
create data ref_type type table of (ls_import_para-STRUCTURE).
ptab_line-tables_wa = ref_wa.
ptab_line-value = ref_type.
The detail of ptab:
VALUE
TABLES_WA
KIND
NAME
->2000000025
{A:initial}
10
2000000025
->Standard Table[0x10(588)]
->Structure: flat & not charlike
30
OT_CONT
And the same error if I set parameter using below code:
create data ref_wa type RS38L_TYP.
assign ref_wa->* to <fs>.
<fs> = ls_import_para-STRUCTURE.
ptab_line-tables_wa = ref_wa.
The detail of ptab:
VALUE
TABLES_WA
KIND
NAME
->2000000025
{A:initial}
10
2000000025
->Standard Table[0x10(588)]
->ZLEAD_INFO_S
30
OT_CONT
Regards,
Jeff

Stored procedure call with REF CURSOR from JDBC

How can I call a SP with a REF CURSOR OUT parameter from JDBC?

This is a breeze.
CallableStatement oraCall = oraConn.prepareCall("BEGIN PKG_SOMETHING.RETURNS_A_SP(?);END;");
oraCall.registerOutParameter(1,oracle.jdbc.driver.OracleTypes.CURSOR);
oraCall.execute();
ResultSet rsServList = (ResultSet) oraCall.getObject(1);
... use ResultSet ...
rsServList.close();
oraCall.close();
slag

Hyperlinks with optional parameter in BO XI3.1

Hi All,
Can anyone please guide me how can i create a hyperlink which takes care of optional parameter and uses the same when there is a value or drop it otherwise from URL.
I am not sure how no_value used to work, please guide me in that direction too.
Thanks a lot in advance
Regards,
Honed Ali

Hi,
try with this formulas.
1. If you want to pass a single value to a prompt in child report
http://<servername>:<port>/OpenDocument/opendoc/<platformSpecific>sType=wid&sDocName=SalesReport&iDocID=2010&lsSSelectaCity=Paris
2. If you want to pass a range of values to a prompt in child report
http://<servername>:<port>/OpenDocument/opendoc/<platformSpecific>?sType=rpt&sDocName=SalesReport&lsMSelect+Cities=[Paris],[London]
Cheers,
Suresh Babu Aluri.

[SOLVED] firefox "open with" option missing from d

Has anyone noticed that, in firefox 2, the "Save/OpenWith/Cancel dialog has changed to only "Save/Cancel" (with no option to open the file with a particular application)?
For instance, clicking on the first "Excel" file type on this Web page only gives me a Save or Cancel option. With firefox 1.5 there was an additional option for "Open With". In other words, there is no way I can instantly open the document with Open Office using a temporary location. I have to first save it to my home directory and then open it with Open Office or something.
When using firefox 2 with Web-based email clients like Yahoo! Mail, it's annoying that I can't just instantly open attachments (like PDFs). Instead, I have to first save everything.
Is there something I can change in about:config to get back the 1.5 behavior?

No, I already checked my firefox preferences. The preferences explain the behavior of Excel files (set to always save). But, for me, the "Open with" option went missing for PDF attachments and some other unknown binary file types.
I have PDFs set to open with acroread in FF preferences, so that seems okay. Nothing in the filetypes configuration has changed. In fact, the PDFs work okay (with acroread plugin) when I click a PDF link on a random web page. It just doesn't work in email attachments like in gmail (and, it used to before). It used to be that it would give me the "Open With" dialog and I'd open the document with acroread (external application, not the plugin). Now, it forces me to save or cancel. I noticed it happens with some other unknown binary file types, too (I thought these were also supposed give me the "Open with" option).

Odi os call with option parameter from odi procedure

Similar Messages

Maybe you are looking for