ODS/ODSSM schema creation

We have been working with OIAM 11g for a few years now with great success.  This is our first install on Centos6.4 and it's on AWS.
We have never had an issue running the installs and having ODS or ODSSM get created, but this time on CentOS 6.4 -- and that may have nothing to do with it -- the schemas are not created.  So when we go to configure IDM, the config.sh cannot connect to the ODS schema because it wasn't created.
Which begs the question -- where should I expect the ODS and ODSSM schemas to be created?   We run RCU to create the OID schema -- where I would expect this to occur -- but there are no errors in the RCU logs indicating that or why ODS and ODSSM were not created.
Any ideas?

You did not specify which version. Assuming you are using Oracle Identity Management 11gR2 11.1.2.1.0
Red Hat EL 6 (UL1+) is supported. Please note this is 64 bit version. So CentOS 6.4 should be fine, make sure it is 64 bit.
Here is the link to Certification matrix for 11.1.2.1.0
http://www.oracle.com/technetwork/middleware/id-mgmt/identity-accessmgmt-certmatrix-1932870.xls
Also make sure you are using below JDK versions
Supported JDK for Red Hat EL 6(UL1+)
Oracle JDK 1.6.0_35+
JRockit 6 Update 37 R28.2.5+
Oracle JDK 1.7.0_07+
You can run RCU again, and check the various schema installed when the GUI screen for schema selection shows up.
If ODS and ODSSM schema are not selected, you can select this time. The schema which are already installed will show up as greyed out. Let us know what the status of ODS and ODSSM show up.

Similar Messages

  • ODS and ODSSM schemas not created in oracle 11.1.0.2 on Win 2008 R2 server

    Hi,
    I'm trying to install webcenter suite installation on windows 2008 R2 server.
    As a starting point installed oracle db 11.2.0.1
    As a second step, tried to run rcu script and found that the ODS and ODSSM schemas are not created as a part of the installation.
    Any idea why they are not created or how they can be created?
    Thanks,
    Raam.

    They're part of identity management suite install and not included in webcenter

  • Ods and odssm schemas missing in oracle db 11.2.0.1 installation.

    Hi,
    I'm trying to install webcenter suite installation on windows 2008 R2 server.
    As a starting point installed oracle db 11.2.0.1
    As a second step, tried to run rcu script and found that the ODS and ODSSM schemas are not created as a part of the installation.
    Any idea why they are not created or how they can be created?
    Thanks,
    Raam.

    This might help
    http://download.oracle.com/docs/cd/E12839_01/install.1111/e12002/oid.htm

  • Cannot start ldap after drop ODS,ODSSM and impdp from last night dump file.

    Hello Experts,
    I have daily export (use expdp) for ODS and ODSSM schemas on new 11.1.1.5 OID environment. I am testing to use ldapadd to add entries (for Net Service only) from old version (10.1.5).
    During the ldapadd test, there are some errors and I fix these errors on ldif file. I try to do a clean load. So, I stop the ldap, drop schema (ODS, ODSSM), use impdp to import these two schemas with a good dump file.
    But I cannot start ldap again. I know the dump file contains some status for running ldap. How to clean the status after impdp completed?
    The error message when I try to start ldap:
    /u01/oracle/OracleOID/opmn/bin>> ./opmnctl shutdown
    /u01/oracle/OracleOID/opmn/bin>> ./opmnctl status
    opmnctl status: opmn is not running.
    /u01/oracle/OracleOID/opmn/bin>> ps -ef|grep ldap
    oracle 19921 22984 0 13:17:58 pts/0 0:00 grep ldap
    /u01/oracle/OracleOID/opmn/bin>> ps -ef|grep OID
    oracle 17515 1 0 Sep 8 ? 0:00 /u01/oracle/OracleOID/ccr/bin/nmz
    oracle 19926 22984 1 13:18:13 pts/0 0:00 grep OID
    /u01/oracle/OracleOID/opmn/bin>>
    Then I drop ODS, ODSSM. (Done)
    Then impdp from dump file (Done)
    /u01/oracle/OracleOID/opmn/bin>> ./opmnctl startall
    opmnctl startall: starting opmn and all managed processes...
    ================================================================================
    opmn id=thruway:6701
    1 of 2 processes started.
    ias-instance id=asinst_1
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    oid1/oidmon/OID/
    Error
    --> Process (index=1,uid=194262388,pid=20189)
    time out while waiting for a managed process to start
    Log:
    /u01/oracle/bea_default/asinst_1/diagnostics/logs/OID/oid1/console~OID~1.log
    thruway:/u01/oracle/OracleOID/opmn/bin>> ./opmnctl status
    Processes in Instance: asinst_1
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    oid1 | oidldapd | N/A | Down
    oid1 | oidldapd | N/A | Down
    oid1 | oidmon | N/A | Down
    EMAGENT | EMAGENT | 19969 | Alive
    Thank you,
    Xiaogang

    Try to reboot physical machine. Your problem will be solved.
    Regards,
    A

  • Error in RCU 11.1.1.5 OIM Schema Creation

    Hi,
    I am trying to install OIM11g on Win2008 server, 64 bit VM. I have successfully installed and created Oracle Database 11.2.
    Before running RCU 11.1.1.5, I have altered the needed database system parameters. viz.
    open_cursors=800
    processes=500
    session_cached_cursors=100
    shared_pool_size=144M
    sga_max_size=1648M
    db_block_size=8192
    When i am running RCU 11.1.1.5, all schemas except OIM are getting created successfully. For OIM schema creation, I am getting error
    RCU-1630: Action failed -
    RCU-6136: Error while trying to execute SQLPlus action.
    The rcu.log says there are IOExceptions.
    I have searched a lot about the resolution but haven't really got any solution.
    Please help.
    Thanks,
    Kulesh...

    Hi Kulesh,
    Try copy msvcr71.dll from *<your installer directory>\rcuHome\jdk\bin* to C:\Windows\SysWOW64 and C:\Windows\System32
    And then run RCU again to create your OIM schema.
    Thank you,
    Ivan P.

  • OIM 11g R2 installation Issue. OIM Schema creation failed using RCU 11.1.2

    I have been trying to install OIM 11g R2 on a Windows server 2008 R2 64 Bit and have been encountering the following error during the OIM schema creation. The other schemas, such as Metadata, SOA, user messaging services and other associated schema creation was successful. But, the OIM schema creation was taking more than 2 minutes and finally it fails with the below error.
    RCU-6130: Action failed
    RCU-6135: Error while trying to execute java action.
    Components used:
    OS: Windows Server 2008 R2 64 Bit
    DBS: 11gR2 (11.2.0.1)
    RCU: 11.1.2
    The first error occured was ora-12637 packet receive failed followed by Table or View does not exist. I could not fetch much information from the oim and rcu.log.
    I have set the processes, open_cursors and session_cached_cursors as suggested in the preinstallation step of OIM 11g R2 installation.
    Any pointers on this will be highly appreciated.
    Thanks,
    Srini

    Copy the msvcr71.dll file from rcuHome\jdk\jre\bin inside rcu installer and paste it in C:\Windows\SysWOW64.
    Try running the rcu again with the new user i.e. instead of DEV_OIM, run it with DEV_OIM1.
    Or drop the DEV_OIM user first and then use the same user.

  • Oracle Fusion Store Front Demo Application - Schema Creation Failed

    I have downloaded the Fusion Store Front Demo Application "FusionOrderDemo_R1PS2.zip" from http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html .
    Followed the instructions on the same page. But Schema creation is failing.
    I am not sure why it is not picking the whole path till JDeveloper i.e. looking for wlserver_10.3\server]\lib in I:\Oracle\FusionMiddleware\wlserver_10.3\server\lib ( JDeveloper not getting added to path.)
    Build.Properties file content :
    jdeveloper.home=I:/Oracle/FusionMiddleware/JDeveloper
    src.home=..//..
    # JDBC info used to create Schema
    jdbc.driver=oracle.jdbc.OracleDriver
    jdbc.urlBase=jdbc:oracle:thin:@localhost
    jdbc.port=1521
    jdbc.sid=XE
    # Information about the default setup for the demo user.
    db.adminUser=system
    db.demoUser=FOD
    db.demoUser.password=fusion
    db.demoUser.tablespace=USERS
    db.demoUser.tempTablespace=TEMP
    Error :
    BUILD FAILED
    F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
    F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
    F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
    F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\build.xml:28: I:\Oracle\FusionMiddleware\wlserver_10.3\server\lib not found.
    Total time: 2 seconds
    Thanks,
    Rajdeep

    Thanks John.
    So jdeveloper.home is not the JDeveloper installation directory. Actually jdeveloper.home value should include jdeveloper folder along with JDeveloper Installation directory.
    Can you please look whether this run is successful. It seems like some issues with populate images or should i open a separate post for this.
    Buildfile: F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\Ant\build.xml
    populateImages:
    [java] Jan 13, 2011 12:21:21 AM oracle.as.jmx.framework.LoggerHelper log
    [java] SEVERE: Error initializing the JMX FRamework SPI "oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProviderImpl"
    [java] java.lang.reflect.InvocationTargetException
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.initializeSPI(PortableMBeanFactory.java:1895)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.initializePlatformSPI(PortableMBeanFactory.java:1851)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.init(PortableMBeanFactory.java:1831)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:207)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:215)
    [java]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    [java]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    [java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    [java]      at java.lang.Class.newInstance0(Class.java:355)
    [java]      at java.lang.Class.newInstance(Class.java:308)
    [java]      at oracle.mds.core.MDSInstance.lookupMBeanServer(MDSInstance.java:2061)
    [java]      at oracle.mds.core.MDSInstance.checkMDSDeployStatus(MDSInstance.java:950)
    [java]      at oracle.mds.core.MDSInstance.<init>(MDSInstance.java:1692)
    [java]      at oracle.mds.core.MDSInstance.<init>(MDSInstance.java:1666)
    [java]      at oracle.mds.core.MDSInstance.findAndStoreMDSInstance(MDSInstance.java:1962)
    [java]      at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:507)
    [java]      at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:470)
    [java]      at oracle.adf.share.config.ADFMDSConfig.getDefaultMDSInstance(ADFMDSConfig.java:436)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at oracle.adf.share.config.FallbackConfigImpl.getMDSInstance(FallbackConfigImpl.java:65)
    [java]      at oracle.adf.share.config.ADFContextMDSConfigHelperImpl.createMDSSession(ADFContextMDSConfigHelperImpl.java:50)
    [java]      at oracle.adf.share.ADFContext.getMDSSessionAsObject(ADFContext.java:1224)
    [java]      at oracle.jbo.mom.MOMParserMDS.getMDSSession(MOMParserMDS.java:60)
    [java]      at oracle.jbo.mom.MOMParserMDS.parse(MOMParserMDS.java:189)
    [java]      at oracle.jbo.mom.MOMParserNonMDS.readAndParse(MOMParserNonMDS.java:71)
    [java]      at oracle.jbo.mom.DefinitionContextStandard.readAndParse(DefinitionContextStandard.java:237)
    [java]      at oracle.jbo.mom.DefinitionManager.loadProjectDefinition(DefinitionManager.java:1447)
    [java]      at oracle.jbo.server.SessionImpl.init(SessionImpl.java:160)
    [java]      at oracle.jbo.server.ApplicationModuleHomeImpl.createSession(ApplicationModuleHomeImpl.java:106)
    [java]      at oracle.jbo.server.ApplicationModuleHomeImpl.<init>(ApplicationModuleHomeImpl.java:43)
    [java]      at oracle.jbo.server.InitialContextImpl.createJboHome(InitialContextImpl.java:52)
    [java]      at oracle.jbo.common.JboInitialContext.lookup(JboInitialContext.java:73)
    [java]      at javax.naming.InitialContext.lookup(InitialContext.java:392)
    [java]      at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:155)
    [java]      at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2767)
    [java]      at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:589)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2327)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2203)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3101)
    [java]      at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:460)
    [java]      at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:431)
    [java]      at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:426)
    [java]      at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1494)
    [java]      at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1399)
    [java]      at oracle.fodemo.share.imageloader.LoadImages.main(LoadImages.java:23)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at org.apache.tools.ant.taskdefs.ExecuteJava.run(ExecuteJava.java:217)
    [java]      at org.apache.tools.ant.taskdefs.ExecuteJava.execute(ExecuteJava.java:152)
    [java]      at org.apache.tools.ant.taskdefs.Java.run(Java.java:764)
    [java]      at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:218)
    [java]      at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:132)
    [java]      at org.apache.tools.ant.taskdefs.Java.execute(Java.java:105)
    [java]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    [java]      at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    [java]      at org.apache.tools.ant.Task.perform(Task.java:348)
    [java]      at org.apache.tools.ant.Target.execute(Target.java:357)
    [java]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
    [java]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
    [java]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
    [java]      at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
    [java]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
    [java]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    [java]      at org.apache.tools.ant.Task.perform(Task.java:348)
    [java]      at org.apache.tools.ant.Target.execute(Target.java:357)
    [java]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
    [java]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
    [java]      at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [java]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    [java]      at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
    [java]      at org.apache.tools.ant.Main.runBuild(Main.java:758)
    [java]      at org.apache.tools.ant.Main.startAnt(Main.java:217)
    [java]      at org.apache.tools.ant.Main.start(Main.java:179)
    [java]      at org.apache.tools.ant.Main.main(Main.java:268)
    [java] Caused by: java.lang.IllegalStateException: access denied (javax.management.MBeanTrustPermission register)
    [java]      at oracle.as.jmx.framework.generic.spi.CoreJMXFrameworkProviderImpl.init(CoreJMXFrameworkProviderImpl.java:268)
    [java]      at oracle.as.jmx.framework.generic.spi.CoreJMXFrameworkProviderImpl.init(CoreJMXFrameworkProviderImpl.java:137)
    [java]      at oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProviderImpl.init(JMXFrameworkProviderImpl.java:77)
    [java]      ... 93 more
    [java] Caused by: java.security.AccessControlException: access denied (javax.management.MBeanTrustPermission register)
    [java]      at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
    [java]      at java.lang.SecurityManager.checkPermission(SecurityManager.java:568)
    [java]      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.checkMBeanTrustPermission(DefaultMBeanServerInterceptor.java:1824)
    [java]      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:310)
    [java]      at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    [java]      at oracle.as.jmx.framework.config.session.ReadOnlyConfigurationMBeanServer.registerMBean(ReadOnlyConfigurationMBeanServer.java:80)
    [java]      at oracle.as.jmx.framework.config.session.ConfigurationSessionManager.registerSessionManagerMBean(ConfigurationSessionManager.java:135)
    [java]      at oracle.as.jmx.framework.config.session.ConfigurationSessionManager.<init>(ConfigurationSessionManager.java:127)
    [java]      at oracle.as.jmx.framework.generic.spi.CoreJMXFrameworkProviderImpl.initConfigSessionInfrastructure(CoreJMXFrameworkProviderImpl.java:307)
    [java]      at oracle.as.jmx.framework.generic.spi.CoreJMXFrameworkProviderImpl.init(CoreJMXFrameworkProviderImpl.java:260)
    [java]      ... 95 more
    [java] Jan 13, 2011 12:21:23 AM oracle.jdbc.driver.OracleDriver registerMBeans
    [java] SEVERE: Error while registering Oracle JDBC Diagnosability MBean.
    [java] java.security.AccessControlException: access denied (javax.management.MBeanTrustPermission register)
    [java]      at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
    [java]      at java.lang.SecurityManager.checkPermission(SecurityManager.java:568)
    [java]      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.checkMBeanTrustPermission(DefaultMBeanServerInterceptor.java:1824)
    [java]      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:310)
    [java]      at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    [java]      at oracle.as.jmx.framework.config.session.RuntimeConfigurationMBeanServer.registerMBean(RuntimeConfigurationMBeanServer.java:64)
    [java]      at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:345)
    [java]      at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:197)
    [java]      at java.security.AccessController.doPrivileged(Native Method)
    [java]      at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:193)
    [java]      at java.lang.Class.forName0(Native Method)
    [java]      at java.lang.Class.forName(Class.java:247)
    [java]      at oracle.jbo.common.java2.JDK2ClassLoader.loadClassForName(JDK2ClassLoader.java:34)
    [java]      at oracle.jbo.common.JBOClass.forName(JBOClass.java:162)
    [java]      at oracle.jbo.server.BaseSQLBuilderImpl.doRegisterDefaultDriver(BaseSQLBuilderImpl.java:200)
    [java]      at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:903)
    [java]      at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1112)
    [java]      at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6372)
    [java]      at oracle.jbo.server.DBTransactionImpl2.connect(DBTransactionImpl2.java:130)
    [java]      at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:213)
    [java]      at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:562)
    [java]      at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:410)
    [java]      at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:8651)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4405)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2391)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2203)
    [java]      at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3101)
    [java]      at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:460)
    [java]      at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:431)
    [java]      at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:426)
    [java]      at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1494)
    [java]      at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1399)
    [java]      at oracle.fodemo.share.imageloader.LoadImages.main(LoadImages.java:23)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at org.apache.tools.ant.taskdefs.ExecuteJava.run(ExecuteJava.java:217)
    [java]      at org.apache.tools.ant.taskdefs.ExecuteJava.execute(ExecuteJava.java:152)
    [java]      at org.apache.tools.ant.taskdefs.Java.run(Java.java:764)
    [java]      at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:218)
    [java]      at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:132)
    [java]      at org.apache.tools.ant.taskdefs.Java.execute(Java.java:105)
    [java]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    [java]      at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    [java]      at org.apache.tools.ant.Task.perform(Task.java:348)
    [java]      at org.apache.tools.ant.Target.execute(Target.java:357)
    [java]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
    [java]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
    [java]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
    [java]      at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
    [java]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
    [java]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    [java]      at org.apache.tools.ant.Task.perform(Task.java:348)
    [java]      at org.apache.tools.ant.Target.execute(Target.java:357)
    [java]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
    [java]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
    [java]      at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [java]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    [java]      at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
    [java]      at org.apache.tools.ant.Main.runBuild(Main.java:758)
    [java]      at org.apache.tools.ant.Main.startAnt(Main.java:217)
    [java]      at org.apache.tools.ant.Main.start(Main.java:179)
    [java]      at org.apache.tools.ant.Main.main(Main.java:268)
    revokePrivs:
    [sql] Executing resource: F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\Scripts\SQLRunner1276056861.sql
    [sql] 6 of 6 SQL statements executed successfully
    [delete] Deleting: F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\Scripts\SQLRunner1276056861.sql
    [echo] Cleaning up database user privileges.
    createDatabase:
    [echo] Database (Re)Creation Complete
    buildAll:
    BUILD SUCCESSFUL
    Total time: 51 seconds

  • Requesting help-Schema creation and databinding

    We are using Livecycle ES 2, I am facing issues in traversing forms from one stage to another, forms are not holding datas from the previous stages.
    The steps which I followed are,
    1) Created schema to define the fields and data types
    2) Created two new forms in designer , to which schema has been binded to corresponding fields(data View ->> Create Connection->> Schema)
    3) Created a process, created two XML variables(xfaform data type has not been found!)  to hold the created forms
    4) Form1 has been mapped to XMLVariable1
    5) Form2 has been mapped to XMLVariable2
    6) On process, in stage1 - Form1 should appear and in stage2 - Form2 should appear to the end user
    7) in between stage1 and stage2, a setvalue stage is there to map the common data from form1 to form2
    8) So in stage2, user will get form2 well binded with the data from form2
    + few extra fields for user inputs
    9) To map the  data from form1 to form2, I am using "Location-Expression"
    property of setvalue stage
    10) "Location-Expression" is using the XMLvariables - drill down
    XMLVariable2(/process_data/IMFormData/xdp/datasets/data) assign
    XMVariable2(/process_data/FormData/xdp/datasets/data)
    But, when the form reaches stage2, form2 doesnt holding the data from
    form1
    Please help me to sort it out.Also, please let me know if there any tools or tips with you to create schema in much faster and efficient way.

    You do not need a schema (but you can use one if you need it). The form design is in fact a definition of the data structure. By default when a form is created without a schema the fields get Normal binding which allows data files with nodes and structure that have the same name as the field to populate those fields.
    If you still want to create a schema ...you can go into the File/Form Properties/Preview tab and create sampel data. This sample data file can be used by many programs that convert an XML file into a schema. Just do a search in teh web for xml to schema creation and you will get many hits.
    Lastly you coudl even use the sample XML file as the input file (Designer's Data connections allow for a sample xml file as well).
    Hope that helps
    Paul

  • Extended Analytics for star schema creation from HFM application

    Hi,
    I'm trying to create star schema via extended analytics from HFM application but facing below error
    3/21/2013 12:30:07 PM : Status : Extracting Metadata
    Schema did not previously exist.
    Metadata update has failed. : (-2147217900) (One or more errors occurred during processing of command.)
    Processing status change: (-2147217900)
    Data processing failed. : (-2147217900) (One or more errors occurred during processing of command.)
    3/21/2013 12:30:10 PM : Status : Processing completed with errors
    Extended Analytics export completed with errors for Application GCS using Label GCS CON.
    What could be the possible reason for it?
    Also can someone please provide any suitable references or links to learn this EA for star schema creation.
    Thanks,
    Ravi Agrawal

    The error you pasted here is incomplete. Look in the system messages and you will find more complete information that will lead you to the error's cause. Very often this is an error in the database, though sometimes it is caused by a metadata member with an invalid character. To determine whether it is data or metadata that causes the error, you could generate a schema with metadata only and see if the error appears.
    -- Chris

  • Custom Schema creation/Drop

    Hi All,
    I am currently working on Schema Objects/their dependencies, any help on the following appreciated:
    1). How to get all separate object types (one by one) under a schema drop/creation listing?
    2). Selective Tables under a schema and their all dependencies whichever available/applicable (constraints/views/synonym/sequences/triggers,program sources, etc) drop/creation listing?
    If you check following SQL, you'll find 44 rows as a result,
    SQL> select distinct object_type from dba_objects; 
    44 rows selected.
    SQL>I have checked DBMS_METADATA, but looks like its under maintenance.
    Seeing Object types will give a broader perspective.
    Thanks,
    Aamer

    Hi,
    You can use this query to find dependencies with dependend object name and status.
    SELECT A.OBJECT_TYPE, A.OBJECT_NAME, B.OWNER, B.OBJECT_TYPE, B.OBJECT_NAME,
    B.OBJECT_ID, B.STATUS
    FROM SYS.DBA_OBJECTS A,
    SYS.DBA_OBJECTS B,
    (SELECT OBJECT_ID, REFERENCED_OBJECT_ID
    FROM PUBLIC_DEPENDENCY
    START WITH OBJECT_ID =
    (SELECT OBJECT_ID
    FROM SYS.DBA_OBJECTS
    WHERE OWNER = &SCHEMA_NAME
    AND OBJECT_NAME = &OBJECT_NAME
    AND OBJECT_TYPE = &OBJECT_TYPE)
    CONNECT BY PRIOR REFERENCED_OBJECT_ID = OBJECT_ID) C
    WHERE A.OBJECT_ID = C.OBJECT_ID
    AND B.OBJECT_ID = C.REFERENCED_OBJECT_ID
    AND A.OWNER NOT IN ('SYS', 'SYSTEM')
    AND B.OWNER NOT IN ('SYS', 'SYSTEM')
    AND A.OBJECT_NAME <> 'DUAL'
    AND B.OBJECT_NAME <> 'DUAL';
    Satyam.

  • XML schema creation

    hi all,
    i created a XML schema but i have some confusion in :
    <Processsteps>
    <ProcessStep/>
    <ParallelProcessStep/>
    </ProcessSteps>
    in this case none(child element) is manadatory, but there should be at least 1 child element of either type.
    how can i implement this problen mentioned above in Schema? can anybody send code for this problem/

    Try the 'choice' option for a 'complexType'
    I just recently learned how to write schemas. This tutorial is a little vague, but it gave me a good start
    http://www.w3schools.com/schema/default.asp
    Sorry, not giving you code, it's not that difficult.

  • Xml Schema creation - enforcing one tag at root

    I have a schema such as the one below but this permits any of the global element declarations to start as the root of an xml document.
    I want just <table> to be at the root.
         <xs:element name="table">
              <xs:complexType>
                   <xs:sequence>
                        <xs:element maxOccurs="unbounded" ref="tr"/>
                   </xs:sequence>
                   <xs:attributeGroup ref="attrs"/>
              </xs:complexType>
         </xs:element>
         <xs:element name="tr">
              <xs:complexType>
                   <xs:sequence>
                        <xs:element maxOccurs="unbounded" ref="td"/>
                   </xs:sequence>
                   <xs:attributeGroup ref="attrs"/>
              </xs:complexType>
         </xs:element>
         <xs:element name="td">
              <xs:complexType mixed="true">
                   <xs:complexContent>
                        <xs:extension base="Flow">
                             <xs:attributeGroup ref="attrs"/>
                             <xs:attributeGroup ref="cellvalign"/>
                        </xs:extension>
                   </xs:complexContent>
              </xs:complexType>
         </xs:element>Must I have one global element to allow only one element as the document root?
    i.e.
         <xs:element name="table">
              <xs:complexType>
                   <xs:sequence>
                              <xs:element name="tr">
                                 <xs:complexType ref="tr.c">
                        </xs:element >
                   </xs:sequence>
                </xs:complexType>
          </xs:element>
         <xs:complexType name="tr.c">
              <xs:sequence>
                   <xs:element maxOccurs="unbounded" ref="td"/>
              </xs:sequence>
              <xs:attributeGroup ref="attrs"/>
         </xs:complexType>
         thanks

    I would rather use the flatter approach, the xhtml schema does how does it do it?
    http://www.w3.org/2002/08/xhtml/xhtml1-transitional.xsd
    Maybe I should explain more....
    I wish to validate an xml document with a schema only, I pull the xml from within a propery file (Ugly I know). And keep it in memory.
    The xml has no xsi attributes such as 'schemaLocation' , I tell the paser using a property the location of the external schema.
    The outcome of validation is that the paser allows any globally declared element to be a root element when I wish just to have just one.
    I guess the question is, what within the xml document or the schema tells the parser what the root element is?
    cheers

  • Bi Publisher Schema Creation error

    Hi,
    I am getting an error "Schema installation failed while creating tables. Schema may already exist. Please remove the existing schema or choose another database and try again" when i am doing scheduler configuration to load the tables in to the schema in Bi Publisher.Test Connection established the connection successfully not allowing to load the tables in to the schema .
    Thanks &Regards,
    Srinivasu.

    Schema is installed on the DB you mentioned.
    1. Do connect to DB in backend and see the tables.
    2. restart the server in order to see the scheduler tab enabled.

  • Automating DB schema creation by Sqlplus

    Hi,
    I am researching a method to automate the deployment of our windows server 2008 11G oracle database. Currently the steps include;
    1. Log in to sqlplus / as sysdba
    2. Run an sql script, i.e @myDatabaseSchemaCreate.sql
    3. Exit
    4. Login to sqlplus as the dbuser
    5. I start sqlplus and wait for the user name/password prompt and obediently enter it.
    6. Now I run another script ie. @mydbuserscript.sql.
    This is the process handed down to me by the all-knowing and almighty DBAs and it will not change, It would only be ran once in any environment upon the creation of this environment. In some projects, we may have 5 or 6 environments and quite often something goes wrong which requires a full re-install. What I would like to determine is what methods I have to automate these steps, does anyone have advice/experience of what is best. I was exploring what is involved in writing a .net or java app to automate it, alternatively does oracle provide other methods to automate this?

    user5780461 wrote:
    Hi,
    I am researching a method to automate the deployment of our windows server 2008 11G oracle database. Currently the steps include;
    1. Log in to sqlplus / as sysdba
    2. Run an sql script, i.e @myDatabaseSchemaCreate.sql
    3. Exit
    4. Login to sqlplus as the dbuser
    5. I start sqlplus and wait for the user name/password prompt and obediently enter it.
    6. Now I run another script ie. @mydbuserscript.sql.
    make bat file containing lines like below
    sqlplus "/ as sysdba" @myDatabaseSchemaCreate.sql
    sqlplus username/password @mydbuserscript.sql

  • Target Schema creation with Warehouse Builder

    Hi,
    I have installed Oracle Enterprise 9.2.0.1.0 and Warehouse Builder 9.2.0.2.8.
    The repository, the runtime and the target schema have been created without problem.
    I also have created some test jobs and everything run fine.
    My question is:
    Can we create a target schema without those tables
    CREATE$JAVA$LOB$TABLE,
    JAVA$CLASS$MD5$TABLE,
    WB_RT_EXCEPTIONS,
    WB_RT_PARAMETERS,
    WB_RT_PLATFORM_CONFIG,
    WB_RT_PLATFORM_PROPERTIES,
    WB_RT_POSTLOAD_EXCEPTIONS,
    WB_RT_SEEDED_STRINGS,
    WB_RT_TIME_SRC.
    Thanks for your answers.

    Theoretically you can, but you need these objects accessible from the mapping code, as they log information in these tables.
    So you can create synonyms into the target schema, just make sure you have the correct privileges (complete read/write).
    Jean-Pierre

Maybe you are looking for