OEL and SQL Developer Install Question

While downloading the SQL Developer on Oracle enterprise Linux OS I choose “Open Software Installer(Default)”.
Installed the software after choosing the above options.
1.     Where did the software installed?
2.     How to launch the SQL Developer?
3.     Do I need to give some permissions for the Oracle user to run SQL Developer?
Oracle Enterprise Linux Release 5 Update 4.
Thank you,
Smith

Start to read the Installation Guide :
http://www.oracle.com/technology/products/database/sql_developer/pdf/rptig.pdf
Then the User's guide :
http://www.oracle.com/technology/products/database/sql_developer/pdf/rptug.pdf
Nicolas.

Similar Messages

Installing Oracle Database and SQL Developer

Hi, I was looking for some help/advice in regards to installing an Oracle Database and SQL Developer onto a Windows 7 32bit machine. I have been asked to create a database to store data that I create through reports in Excel so I am required to create a local database but not sure how to go about doing this. Also not sure if I install the Express Edition or Oracle Database 11g R2. If somebody could please advise on how I can get this started or even any links/tutorials that would guide me in how to get this installed with a localhost.
Thanks in advanc.

318f20b8-a3d0-4fb4-bb0f-73785250b7d4 wrote:
Thanks guys, I have managed to install Oracle 11gR2 and I have setup a database using the dbca tool and I can connect to my new database. One thing that I have noticed is that when i look into my tables in sql developer i see loads of different tables i.e. def$_, logmnr_, etc and I am not sure why this is as I expected an empty tablespace.
Thanks btw for all your help.
One of the key principles of relational databases is that they use their own facilities to manage themselves. That means the database management system uses the database to manage data about the database using exactly the same facilities (tablespaces, tables, user accounts, procedures, etc) that an application uses to keep data for the application. See "data dictionary" So there is no such thing as a completely empty database.
As said by others, you do NOT want to be creating your own tables under oracle's schemas (users) or in oracle's own tablespaces (esp. SYSTEM and SYSAUX). Create your own user account/schema. Create your own tablespace. Make that tablespace the default for that user.

NW04s on Win XP and SQL Developer Edition

Hello all
I'm trying to install NW 7.0 (04s) on Windows XP SP 2 and SQL Developer Version.
I checked the PAM and it is listed only Win Server and SQL Server Enterprise Edition.
I'm having the following error during phase 24 of 43 installation. (Start Instance)
- starting epb/dvebmgs00 ABAP unknown elapsed time 5:30 minutes....
and keeps trying to do this for 10 minutes until:
- ABAP processes of instance epb/dvebmgs00 [abap:unknown] did not start after 10:00 minutes. Giving up.
The error say something like this :
ERROR 2007-06-08 16:48:47
CJS-30149 ABAP processes of instance EPB/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.
ERROR 2007-06-08 16:48:47
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
I also have some warnings that may represent something:
INFO 2007-06-08 16:35:17
Execute step createOsCol of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|0|0.
WARNING[E] 2007-06-08 16:35:18
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (SAPOsCol).
INFO 2007-06-08 16:38:11
Execute step createCCMSService of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0.
WARNING[E] 2007-06-08 16:38:11
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
My start EPB.log file looks like this:
running C:\usr\sap\EPB\SYS\exe\uc\NTI386\sapstart.exe name=EPB nr=00 SAPDIAHOST=PALN00433168A -wait
SAPSTART finished successfully on PALN00433168A_EPB_00, but at least one process doesn't run correctly:
C:\usr\sap\EPB\SYS\exe\uc\NTI386\sapstart.exe=>sapparam(1c): No Profile used.
Any ideas as where the error should be?
Thanks
AR

it is not possible to install NW on WIN XP

Using TOAD and SQL Developer to compare db objects in schemas in databases

Hi All,
My primary objective was to compare objects in schemas in two different databases and find out the differences,
Execute DDL's in the database where objects are missing and syn schemas in two different databases.
So I need to compare schemas in databases. Which tool would be helpful and will be user friendly to make a comparison of database objects existing in schemas in two different databases.
I'd like to see if I can get a list of pro and cons between Toad and SQL Developer for comparing schemas pros and cons.
Could you please also help me on navigation in SQL Developer to compare schemas.
Connect to Source
Connect to Target
Compare schemas with different object types
Find out differences
Generate DDL's for the missing objects or for the objects in difference report
Run them in missing instace(Source/Target)
Make sure both are in sync.
Thanks All

Hi,
Most dba type tools have this kind of functionality - personally i use plsqldeveloper but this is very similar to most other tools on the market. SQL Developer seems to rely on you needing the change management pack licence which you likely dont have and would be quite a large cost to roll out.
I'd compare plsqldeveloper/toad/sqlnavigator etc and maybe the tools from redgate which look pretty good though i haven't used them.
Regards,
Harry

Where can I find more OBE like the one for Database xE and SQL Developer?

Hi,
I tried to post on the OBE forum but it is expired.
I found the downloadable OBE, or tutorial, very good resources for me to learn Oracle, like the one for XE and SQL developer, which you can download, not just read online, and see as many times as you can, with flash stuffs inside,
Will you make more this kind of OBE?
Where can I find them?
Peter

Hi Hans,
I know the above address you offered but those are
not downloadble.So do what I do .... CTRL-S (save page)
As an Oracle trainer, I consider the OBEs to be very important. I doubt that Oracle will get rid of them.
However, it takes time to make them. I suspect that they are created when a new feature needs to be demonstrated and the product management has the resources available.
I just wish they would make the original set from Oracle8i available. They provided some very important basics which have long since hit the archive pile.
I'm sure that some of the ACEs would be happy to upgrade them to Oracle10g/11g level. I know I would be willing to contribute to that effort.

WHAT IS DIFFERENCE BETWEEN DEVELOPER 2000 AND SQL DEVELOPER?

Hello Everyone.I am new to oracle and want to know the difference between developer 2000 and sql developer in oracle.Pls?

Developer 2000 is an application for making webforms that will be served on an Application Server, and accessed by the end users through an applet in their webbrowser.
SQL Developer is a tool for administrating and manipulating data and structure of your database. Like a GUI version of SQL*Plus, not advisable for end users.
Regards,
K.

Installing Oracle 10G and SQL Developer for Windows 7 Home Premium

Hi Folks,
I need your helping me in getting the correct Database installed for my Windows 7 .
Can you please help me out in sending me the correct url for Oracle 10G Database & SQL Developer URL
So i can install both and get on with it...
Thanks ,
satish.p

user4789048 wrote:
Hi Folks,
I need your helping me in getting the correct Database installed for my Windows 7 .
Can you please help me out in sending me the correct url for Oracle 10G Database & SQL Developer URL
So i can install both and get on with it...
Thanks ,
satish.pWith the caveat (as already pointed out by Srini in this thread) that no Oracle product has ever been certified on any "home" edition of any version of Oracle ...
If I were looking to download any product, I'd start by going to that company's web site (like, www.oracle.com) and look for a tab or link called "download". I'll bet if you did that, you'd find all sorts of goodies.
But, again, since you are dealing with a "home" edition of Windows, you'll need to start by installing a virtual machine product -- VM Ware's "VMworkstation" or "VMplayer", or Oracle's VirtualBox. Then you can create a virtual machine running a supported OS. Oracle's own Linux (derived from Red Hat Linux) is also free.

Creating A New Oracle Database And Sql Developer

Hi,
I'm a newbie to Oracle and and a not so newbie to Sql Server and Visual Studio.
I am trying to learn Oracle on my local machine. I want to create a new Oracle Database and start learning from there.
I have downloaded sql developer, the data modeler, and the Oracle Client. Could someone please provide some guidance on how to create a Oracle Database?
From the responses, it appears that none of the items I mentioned actually creates a database. Sql Server provides a free download, also a developer version for a minimal fee. What specific Oracle product would be best to provide this type of service?
Thanks,
Mark
Edited by: user8948230 on Jan 7, 2010 9:50 AM

user8948230 wrote:
Hi,
I'm a newbie to Oracle and and a not so newbie to Sql Server and Visual Studio.
I am trying to learn Oracle on my local machine. I want to create a new Oracle Database and start learning from there.
I have downloaded sql developer, the data modeler, and the Oracle Client. Could someone please provide some guidance on how to create a Oracle Database?
From the responses, it appears that none of the items I mentioned actually creates a database. Sql Server provides a free download, also a developer version for a minimal fee. What specific Oracle product would be best to provide this type of service?
Thanks,
Mark
Edited by: user8948230 on Jan 7, 2010 9:50 AMIn addition to downloading and installing the database software to create a database, might I also suggest you start getting familiar with the documentation.
Learning where to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com. Drill down to your product and version.
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
After you have familiarized yourself with what is available, read the "2-Day DBA" manual to help get you started.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Look in your alert log and find all the non-default initialization parms listed at instance startup. Then read up on each one of them in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.

Query Builder and SQL-Developer

Hello everyone,
My proposal is to customize SQL-Developer (via Tools > Preferences ...) so that the end user can use it without danger for the data.
Example: the end user can only create reports, without possibility of drop, update, delete, etc.
The paragraph “Query Builder” of the article “ [Building Queries Visually|http://www.oracle.com/technology/oramag/oracle/08-mar/o28sql.html] ” (Oramag march/april 2008, page 59) inspired this question.
Please, vote for this proposal!
Thank you
Jean-Louis

I overlayed the pre-release versionsDo you mean you installed in the same directory?
Don't do that.
There's a system directory (sqldeveloper\sqldeveloper\system) which holds settings and everything, which very well might be corrupted to be used for a newer release.
Try deleting it, it will be regenerated at next startup. Or even better: re-install in another directory all together...
K.

SQL Developer install problems for Windows 7 Home edition

Hi there,
I understand Windows 7 64-bit is not supported for oracle 11gR2 but I installed it anyway.
This is not my problem.
I am trying to install SQL Developer and am getting this error when I click on the set up:
Unable to launch the Java Virtual machine, located at path:
C:\Program Files(x86)Java\jdk1.6.0_21\bin\msvcr71.dll
When I check the version of my java it is correctly displaying 1.6.0_21 for my 64 bit.
I read that you need the 32 bit one installed as well and I do. In my Program Files there is a java and a \jdk1.6.0_21 folder. In the bin directory it does not have this .dll:
msvcr71.dll
Is that the problem, because i have heard of other people getting sql developer working on their Windows 7 home laptops but they are old posts and I'm not getting any reply.
I also changed the Environmental variable for the path, such as:
C:\Program Files (x86)\Java\jdk1.6.0_21
C:\Program Files (x86)\Java\jdk1.6.0_21\bin
C:\Program Files (x86)\Java\jdk1.6.0_21 /bin
and none of the 3 above worked for me either.
Any suggestions are appreciated!

I unzipped the sql developer download to C:\Windows and it unzipped fine. I went into my folder of sql developer, double clicked the sql developer.exe and it asked for the path for java. I clicked Browse and the default was C:\Program Files(x86)\Java\jdk1.6.0_21\bin so I chose the java from this folder. It accepted the argument, tried to start sql developer, and came up with the same error, so something is still not right that I am not understanding??

Sql developer install problem

Hi,
I'm on W'XP machine trying to make clean nstall Oracle SQL Developer, I did downloaded most recent version but it doesn't have as call "Connection tab" to make new connection !
My version is 2.1.1.64 for Windows 32b. FILE/NEW/CONNECTION/OK doesn't work either. Having this error:
oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: oracle.javatools.db.DBLog
     Dependent class: oracle.jdeveloper.db.DatabaseConnectionStores
     Loader: ide-global:11.1.1.0.0
do I need any other oracle client to be installed ? Or do any other changes to path,etc..
Can anybody give ad advice what coudbe wrong, I also tried to download lower version 1.5.4.59 with no success, could not open it at all.
tx
v

Just played and got it right!
I used download without jdk, having it separately, then pointed to the right java.exe

SQL Developer tool question

Hi Folks
I am using SQL Developer tool. I have a procedure with compilation errors so i can see that procedure with red X mark in SQL Developer tool.
When am clicking on the procedure it is going to the editor there i can see "code"."grants","dependencies","references","details","profiles".
But i can't able to see "Errors" tab in the editor. And main thing is i didnt see any red lines in the editor for the invalid procedure
And when i recompiled that procedure it got recompiled successfully and that red x mark is vanished.
Here my question is the "Errors" tab is only appears when the procedure/function/package has errors and surprisingly i didnt see any red lines in the editor for invalid procedure (may be my proc has no errors).
Thanks

Hello,
maybe your procedure has been invalidated by some DDL, e.g. a new column has been added to a table that is referenced in your procedure. The status will be INVALID until you recompile it or until you call the procedure, then it will be recompiled automatically.
(may be my proc has no errors).Very likely.
Regards
Marcus

Oracle 11g XE and SQL Developer

Hello:
Very new here. I'm not sure where to post anything. Apologies, but I'm all over the board.
I've installed 11g and downloaded SQL Developer (not even sure if this needs to be "installed" as it's just a zip file).
Anyway, at the SQL command line I enter CONNECT SYSTEM and then my password. I get the following error:
ORA 12154: TNS could not resolve the connect identifier specified.
Also, the "get started" link does not work either. Not sure what's going on or if it's specific to my laptop. I've been trying to connect for two days to no avail.
thank for any help.

c\> lsnrctl stat
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 08-SEP-2014 12:28:18
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CFXXXXXXX.xxxxxxxxxxxx.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error

SQL Report not showing data - available in SQL Workshop and SQL Developer

I am having an issue with developing a SQL Report in APEX 3.2.1. I run the code in both SQL developer and SQL Workshop and I get data pulled back (both against my development environment). When I run the same code in a SQL Report region, it returns no data available. Does anyone have any idea what would be causing this? Other regions on the page accessing different tables in the same schema return data without issue. Any help would be appreciated.
Thanks
Freddie

Could you explain the last comment a bit more. Here is a bit more info just in case I touch on the info with it. The db schema is BPAMGR, the Workspace is BPAMGR. We use the same schema for all of our reporting. All of our tables are in the same schema. We don't use any tables outside of this schema. Our APEX workspace has been associated to only this schema. The tables are able to be queried by SQL Workshop in the same APEX instance that the report application is under.
Freddie

Newbie in SQL Developer: misc questions

Hello,
I´m new to SQL Developer, always worked with Quest´s SQL Navigator before.
1.)
I have a file.sql with following instructions:
begin
package_1.variable_1:='T';
package_2.procedure_1;
package_2.procedure_2;
package_2.procedure_3;
end;
In Quest SQLNavigator I started this with "Run (F9".
In SQL Developer this will not start, always telling me error, invalid numbers or some other sh*t, but nothing changed within the packages or procedures.
With SQLNavigator everything works fine.
2.)
In SQLNavigator with "Quick Browse" I get the sql for a table, for example
select a.col1, a.col2, a.col3, ...
from quickbrowsedtable a
How can I get this in SQL Developer ?
3.)
When extracting DDL in SQL Developer columns and table names are in double quotes. Can I change
this to have no quotes at all ?
Thank you very much for your help,
greets,
Frank
Edited by: 968906 on 05.11.2012 04:49

1 - use F5 in the worksheet to run your anon block
2 - drag the table to the worksheet, and select 'Select'
3 - not today

OEL and SQL Developer Install Question

Similar Messages

Maybe you are looking for