OEM jobs submitted but not xecuted

Hello all,
i have my IA sucessfuly installed and running. I can Start
the OEM now and everything works fine. i can create and save
a job. if i submitt the job it is submitted and shown in
the 'active Jobs window' but never gets executed.
job_queue_processes is set to 5, snapshots are executed very
well
since then. what did i do wrong, what can i do right?
any help will be greatly apreciated
Li
null

hi all,
meanwhile i found out, that the jobs are executed very well (checked the results and found *.jou files under $ORACLE_HOME/network/agent that say that the jobs are executed. Just the display in OEM is completely wrong.
Any suggestions why?
Li

Similar Messages

Server Agent job failing but not writing to Error log

We recently migrated from Server 2003 to 2008 R2 running Microsoft SQL Management Studio 2008. We've had a few bumps along the road but my main concern is a SQL Server Agent job that runs at 1:00 AM is failing part way through. Some of the work is
done but not all. The Job Activity Monitor reports it failed but nothing goes in the Error Log. The job did run successfully last week during tests but these failures came after going live and bring over the latest data.
I guess I really need help in diagnosing the lack of information in the Error Log. If I had that data I can begin to follow the bread crumbs to the actual problem.

The Job Activity Monitor reports it failed but nothing goes in the Error Log.
The Agent writes error to it's own log file, called SQLAGENT.OUT, it's also located in LOG subfolder and you also can look it up in SSMS from node "SQL Server Agent"
Olaf Helper
[ Blog] [ Xing] [ MVP]

Timesheets submitted, but not showing in approval center.

Hi,
I have a Project Server 2013 environment in SEM with task status manager approval with line approval before timesheet approval set. A large number of resources are submitting their timesheets, the line items are approved by status manager, but the timesheet
approval does not populate in the timesheet managers approval center. The timesheets are showing the status of Submitted with the timesheet manager as the next approver. Any guidance is greatly appreciated!
Thanks,
Chris

Hello Chris,
Thanks for the update. Yup, that's a bug in my opinion. I see it a lot but really haven't been able to reproduce to cause it to happen.
I do what you did. Turn SEM off to see which timesheets are stuck and then I turn SEM back on. This allows me to see which timesheets are having problems and then I can recall, delete and resubmit those timesheets and then
timesheets will go thru ok.
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Podcast submitted but not showing up in iTunes

I submitted my podcast to iTunes two weeks ago. When I try to resbumit to iTunes, it says that the feed has already been submitted. But the podcast does not show up in iTunes when I search for it.
http://feeds.feedburner.com/IBozo
Any ideas?
Thanks,
Brian

They probably just haven't got round to assessing it yet: I can't give you a hard and fast answer about how long it takes but 2-3 weeks seems perfectly possible. When it's been accepted you will get an email including a URL for the Store page.
Note by the way that the episode 'Drunken Sailors' has two 'enclosure' tags, both containing 'drunkensailor.mp3' but one from www.quass.com and one from Feedproxy. Only the first one will show in iTunes: multiple enclosure tags within one 'item' are not recognized. Otherwise the feed is apparently OK and can be subscribed to manually in iTunes (from the 'Advanced' menu).

Timesheet is submitted but not approved, But the activity is completed

Hi All,
Please post your views.
There is an activity where a resource picked himslef and submitted timesheets with actuals through progress reporter. But the timesheet is yet to be approved. When we see the activity in P6 client, the activity is marked as completed with some actuals. the time approval is set to 1 level approval. However the timesheet is not yet been approved. Please let me know what could be the chance of causing this issue.
Also when the timesheet came for resource manager approval its blank. I have searched in the backend as well, RSRCHOUR, TSDATES, TIMESHT. Nothing can be found over there.
Please post your views.
Thanks,
Pradheep.

Hi All,
Please post your views.
There is an activity where a resource picked himslef and submitted timesheets with actuals through progress reporter. But the timesheet is yet to be approved. When we see the activity in P6 client, the activity is marked as completed with some actuals. the time approval is set to 1 level approval. However the timesheet is not yet been approved. Please let me know what could be the chance of causing this issue.
Also when the timesheet came for resource manager approval its blank. I have searched in the backend as well, RSRCHOUR, TSDATES, TIMESHT. Nothing can be found over there.
Please post your views.
Thanks,
Pradheep.

OEM-Node found but not the database

I have OEM installed on the local machine (NT) that is connected to 2 remote database servers (solaris). Each database server has a database sit on it (8.1.6). Although OEM was able to find both remote servers, only one database was registered with OEM. Could someone provide me with some solutions about how to have both databases registered with OEM?
Thanks.
Morris

Hi,
check if the Agent is started on the remote machine that You don't see in the console.
Try to start the remot agent after the DB startup and the refresh the node via the console.
If not, register the DB manually.
Bye Max
null

Background Job Hanged but no work process assigned

Hi,
Background job has hanged When i see in SM37. But no work process assigned to this job. All work process are waiting status.
What could be the reason. What is the resolution process.
Thanks,
Dayakar

How did you come to a conclusion that the bg job is hangend.
What is the status of the job. ? I guess Job defined, but not yet eligible to run even if the start condition has been fulfilled so it should be in Scheduled status.

Printer installed but not responding to print jobs

I'm not quite sure how to intelligently ask this question so let me describe what happened.
I have a friend who asked for help in troubleshooting a problem with his printer. His printer is a brand new HP Officejet 6600 sitting near his computer and is on his wifi network. He can not print to it wirelessly from his iMac running Lion, but his wife can print wirelessly to it from another room on her iMac. He can print using USB, though, but he prefers wireless because of the wiring situation in this room. Plus, he bought for wireless printing.
When I got there I checked his System Preferences:Print & Fax and confirmed that his printer was installed and had the green idle light showing ready for a print job. I tried to print and everything looked normal and showed that the job was sent to the printer and was 100% completed but the printer never responded. I tried it from his wife's computer and confirmed that she was able to print a page with no problem. I brought my MBP and joined his wifi network and added his printer and was also able to print.
So, I tried some basic troubleshooting steps trying to print after each one, and nothing worked. I deleted and re-installed his printer, repaired permissions, restarted in Safe Boot, tried printing in a second user account, Reset printing system..., deleted all com.apple.print... preferences, installed Onyx and ran the System Cleaning routines, powered down/up the router/computer/printer, reset the wifi on the printer and rejoined his network, and probably a few other things I can't remember right now.
After doing all of this and throwing up my hands I tried to print again from my MBP to prove that I still could, and this time was not able to print. It kept trying to send the job but the printer never responded. His wife's iMac was still able to print, however. This got me frustrated and I decided to ask this forum for help.
Oh, and here's some more information. His wife has a printer next to her computer, an HP Officejet something (I forget, not 6600, though). His iMac is able to print over wifi to this printer with no problem. What the...?
What other things can I try? Does this point to something in the printer such as a bad wifi card, or something? Any suggestions or ideas will be much appreciated.
Thanks

LilyLC, hold on to your chair you will not believe what happened today. Bear with me while I give you all the details but you will want to read the entire story.
First, to answer your question in the first paragraph of that last post, his wife's printer is connected to his wifi and is using the driver installed by Apple and has been updated on the same date as his computer that I gave earlier. She can print to her printer and so can he. After the troubleshooting steps I have taken and took today I agree with your assessment about an intermittent issue with the printer, too, but let me tell you what I did today.
Before going to his house I decided to set up a second wifi LAN at his house using my router to check if his Airport Extreme (I incorrectly thought initially it was an Airport Express) router was the problem. The thinking being that I have checked his printer and computer and nothing I have tried is making a difference, so the only thing left is his router. So, I set up my router and joined his computer, printer, and my MBP, to the wifi and tried to print from both computers. The printer still was NOT working! That was a big disappointment since I just knew that was going to work. I guess that eliminates the router. I reconfigured his computer back to his wifi and proceeded to the next step.
I hadn't installed the drivers from the website you gave me earlier since I saw in Software Updates that he had updated to that same driver set already. Now I got to thinking that maybe those files were corrupted somehow so I downloaded the drivers from the website you gave me and installed. Deleted drivers from Print & Scan pane and installed the newly downloaded driver, tried to print, and that failed, too.
Next I tried your suggestion of using the LPD protocol instead of the HP JetDirect and that setup failed for some reason. I reconfigured using the HP JetDirect, and that worked for printing, as before, but the scan function was not available, as before.
I was getting a little pressed for time today and had time to try one more thing, so I decided to forgo the new Location setup until tomorrow and instead chose to plug his printer directly into the Airport Extreme via USB and see what happened. I deleted the IP driver and clicked the + to add the installed driver and was presented with an HP Officejet 6600 on the top line and lower down under "Nearby Printers" found an HP Officejet 6600 series [XXXXXX] and under that HP Officejet 6600 Fax.
I chose the first driver and installed and tried to print and was successful. However, the scan function was not available. So I deleted that driver and chose the second one. I noticed immediately that the scan function was available. Thinking I might have something I tried to print and was unsuccessful. Mmm...printing works with the first driver but not the second and scan works for the second but not the first. What's with THAT?
This was really getting frustrating by this time and after much discussion with him I told him I thought the printer was the device at fault. For some reason his printer just did not like his network. I tried printing to his wife's computer and that worked great. No problem there. But for some reason his printer did not like his network and refused to work by setting up manually.
I recommended that he bring the printer back and exchange it for another printer. He agreed and immediately boxed it up and left for the store. I returned home to more friendlier surroundings.
Here's where it gets interesting, and it helps to know that my friend is in his mid-eighties. About an hour later he calls and tells me he's sitting in the parking lot of Office Depot. He tells me that when he was in the store discussing with Customer Service about an exchange it dawned on him out of the blue that he DIDN'T NEED TWO PRINTERS!! He said that if he could print to his wife's computer today then he could print to it from now on. I was speechless!!! I told him I asked him at the beginning of all this why he had to have two printers, and at that time he said "trust me, we need two printers". Ok. He tells me he has no idea why he didn't realize that wifi worked differently than cable. He thinks that maybe since his older two printers were each connected to his and his wife's computer these newer computers operated the same way too. But he admits to me that he was the one who set the printers up on his wifi network, so why he didn't realize that only one printer was necessary with wifi he didn't know. He was embarrassed. He admitted to me that technology is very difficult for him to understand. No kidding!!!
I didn't need to remind him how much time had been spent on this problem because he was quick to apologize and was very sorry for taking up so much of my time, and he really appreciated the effort. I told him I didn't mind.
And I really didn't, because I learned so much from this experience by following your suggestions, LilyLC. I never knew how to set up a printer using its IP address, and the protocols to use, and I never knew how to add new Locations in the Network pane and why it might be useful. You also got me to considering other troubleshooting ideas I wouldn't have thought of otherwise. So maybe my friend and I aren't that different after all.
I really appreciate all the suggestions, links, and ideas you offered during this effort, LilyLC. I wish I could have determined the cause of the problem but, not knowing the inner workings of these devices, I can only assume that it had to have been the printer.
I bet I get a call from my friend a week from now saying that he just bought a second printer for his room because his knees can't take the walking from his room to his wife's room to get all of his printouts. All I can say is THAT printer better work.
Thanks again, LilyLC, for all your time and help. It was really appreciated!

Where to look for reasons a job is active in sm37 but not in sm51

I have sitation a job is active in sm37 but not in sm51. What could be the reason?
What to look for.
I try to Job->Check staus in "sm37" but job still looks to be active

this is the log of still active k+job in sm37:
Date       Time     Message text                                                                                Message class Message no. Message type
17.12.2009 23:00:25 Job started                                                                                00           516          S
17.12.2009 23:00:25 Step 001 started (program RFKK_MASS_ACT_SINGLE_JOB, variant &0000000051777, user ID BVJANBO)      00           550          S

HP P1102w don't print - W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.

Sirs,
I'm trying to print from wirelessy from my MacBook Pro (OS X Mountain Lion) to a P1102w printer without success.
The error message is:
W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.
The Printer Firmware is 20120130 (HP last version)
Any hints?
Regards
Camilo

It doesn't share the printer and the Mac can't print

E Recruitment -Candidate applied for job but not reflected candidate name

E Recruitment
Candidate applied for job but not reflected candidate name Recruiter Dashboard
Please any one suggests me what is problem?
Regards
Eshwar

Hello Sri,
the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
Kind Regards
Roman

Print Job Stopped on Xerox 7750 IP Printing but not AppleTalk

We have a bunch of Xerox 7750s setup via IPP. When we upgraded to 10.5.2 all print jobs sent to them appear in the cue as Stopped. When I re-setup some of the print cues via AppleTalk most of them work, but not all. I've tried the firewall suggestions mentioned here
http://discussions.apple.com/message.jspa?messageID=6765428#6765428
with no success. Sharing printers is out of the question. I'm not a fan of AppleTalk, but if it's the only way I guess I could give it a try.
Any suggestions on how to get my IPP to work?

Hello Henry,
all Airport Stations are recognised. I just connected the printer to the station in the living room, listen to music from ITunes right now, printer is recognised connected to this Airport Station, but the print job still stops.
It is frustrating, and a hassle to connect the printer via USB each time you need to print......BUT....nothing compared to the hassle I had with "other" operation system LOL!
Thank you for your reply

LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out

LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out. How do I repair?
Thanks!

Hi @LWest322 ,
I see that you are having issues with the fax not sending the fax. I can help you.
The settings would be under the Fax Menu button, Send Options, Send Fax Later.
I don't believe there is a option though to turn it off or on, just to set the date and time.
I can send you the reset for the printer in a private message, which resolve this issue.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OEM Job and Event - No Results

Hi,
How are you doing today? Well, I need your help. I am new DBA for one month old. I want to run OEM Jobs and Events.
I am able to log with sysman/oem_temp
i have created credential for node and database.
I am able to work on other parts except these two.
I am able to create job and event
after creating job . I am getting status as submitted.but it is not executing immediately.it is the same problem with event also.
In event ,one event get registered but another event status is not registered then i have checked for detail
error is like this
vd:1523 - there is no agent on node(server)
i didn't get what is inteligent agent and how to get it on node?
Well I have created new user with Windows 2000 having privileges for batch processing. same user is created in oracle database as well as oem administrator.
with same user database connection i am trying to create new job and event but it is not executing. i mean no results.
I know I am making you more confused.Sorry.......
I would like to ask your favour can I mail u if I have any query in future.
Thanks a lot in advance.
-Deepak

The intelligent agent is a process which has to run on the same node like the database you want to supervise with the OEM. You have to install the intelligent agent during the installation process of the database. After having installed the agent you have to start it (via the services panel in Windows). After that you have to ensure that the agent has discovered a database instance on the node (there should be entries for node, listener and database in the services.ora file in the ORACLE_HOME\network\agent directory). If this is all ok and the events or the jobs still doesn't work it may be a communication problem (are you using a firewall between the database node and the management server, or do you use network adress translation?).

Printer connected to AE suddenly won't print jobs submitted by Mac clients

I have an HP 2015 Laserjet connected to an ethernet port on my AE. It has been running fine for almost a year. Suddenly (today) it no longer prints jobs submitted from 2 different Macs (10.5.7 and 10.5.8) on the wireless net. There are 2 Windoze machines on the wireless domain which have no trouble printing.
I can see the utility page from the Macs, so the connectivity is there. When I submit a print job, it shows up in the print queue, the green data light on the printer blinks, the job now is displayed in the queue as "completed." But no printing occurs.
Yes, there is paper in the printer. I can print a test page but only from the printer's control panel. The 2 Windows machines can print.
I have tried everything I can think of: removing the printer and reinstalling it, rebooting the machine, cycling power on the AE, cycling power on the printer. Nothing helps.
I run network diagnostics and get the following error message:
+Network Diagnostics was able to connect to the Internet,+
+but not to the server "HP Laserjet P2015 Series+
+(20D501).pdl-datastream.tcp.local." This could be+
+caused by problems with the server, or an Internet+
+problem between this computer and the server.+
Does anyone have a suggestion?
Message was edited by: Micheal LeVine. Network diagnostics info added

Problem has gone away.
Removed printer from printer list
Shut down everything -- iMac, AE, printer, wait 5 minutes, power back on,
added printer to list
Everything works.
An Apple mystery.

OEM jobs submitted but not xecuted

Similar Messages

Maybe you are looking for