Off-line images are impossible to re-connect!

I have about 4,000 images in my referenced library that I can't seem to re-connect. I've tried to simply reconnect in the Manage Referenced Files dialog box. But unfortunately the reconnect and Reconnect all buttons are still grayed out. I've also tried to change the location of the files and then performing the reconnect, but the files still can't be reconnected.
Please help!

Ian,
Thank you very much!!! This worked!!!!!
I went to Manage Reference Files, then I navegated to location of one of the 4000 files and like previously the Reconnect and Reconnect All buttons were grayed out. But as soon as I pressed the Alt/Option button the two buttons miraculously appeared. A few seconds after pressing the Reconnect all button they are all now On-line.
Thanks again.

Similar Messages

  • Printing or Editing Off-Line Images

    Hi,
    I am looking for the best way for editing or printing images that have been previously moved/archived to CDs/DVDs when using PSE 3/4 Organizer. As I understand it once you bring back an image to edit it, the archived version is brought back online., and the one on the CD is basically removed from the catalog. Is this correct?
    How does all this work if you are dealing with Version Sets, all of which have been previously archived to CDs?
    What if you only want to bring an archived image to print it? In this case, is the high resolution image just temporarily loaded to make the print? I vaguely remember that the answer to this is yes, but I am not positive.
    And what if you wanted to make a slide show but did not want to start with the resolution of your proxies?
    I do know that I can go and find the answers to each one of these questions myself, but I am hoping to save a little time and possibly screwing up somewhere by asking the question before trying things out. I am also interested on how others are doing the above.
    TIA
    Don S.

    Barb,
    Thanks so much for the simple solution. I have tried it and it seems to do just what I want. Let me list the steps to make sure I did what you said.
    1. From the Organize mode, I select the off-line photo
    2. Click on Go to Standard Edit. I get the message re. picture is no considered on-line.
    3. After the image is oopened in the Editor, I go back to the Organizer, click on the Undo arrow. The gold CD icon on the picture, which was not there now comes back, but the red strip with the lock is still over the photo.
    4. I go back to the Editer, make my changes and then use Save As with a new name.
    5. I close the photo in the Editor, and automatically am taken back to the Organizer, where there is no red stripe, but now two photos in the Photo Bin, the one off-line with the CD icon in the top left corner, and the edited version right next to it that is on-line.
    To be honest, I only did Steps 1-3. I am presuming that Steps 4-5 would be as stated. Is this how the whole process works?
    PS I did confirm that when you bring an off-line image back in to print it, it is only brought back temporarily and is still considered an off-line image after being printed.
    Again, thanks for your initial answer Barb. I now need to see how Version Sets affect the above, if at all.
    Don S.

  • How do I disable firefox off line it will not let me connect to the web

    how do I disable firefox off line, it will not let me connect to the web

    Go into settings and reset all network connections. Then restart your device by holding the power and home button until the Apple logo appears. You will not lose any data. When the device restarts connect to your wireless network.

  • Merged Clips Appear Off Line Yet Are Successfully Linked In CS 5.5

    Hi there. I just migrated a feature documentary from an edit suite in a local production company to my home. We're using Adobe Production Premium CS 5.5, I tried to migrate the project using the Project Manager function of premiere. But no matter what combination of options I tried it failed everytime. Huge pain!
    Anyway, the whole thing is nearly up and running again - but there is a problem with some of the merged clips. We were shooting on DSLRs, with a Zoom H4N dual audio system. Dual Eyes was then used to synch the clips. Which were then merged with the relevant video files in the various relevant bins.
    Here lies the problem, obviously I had to go and relink all the media files. Grand job. Thought I was all done but then I noticed, that when I was linking "merged clips" they weren't coming up properly in the sequences. Like, they were there in the bins. They would appear if double clicked in the source monitor. You could even do an old "in and out" and drag your selection into the sequence, and all the extra Dual Eyes audio synchs would be there and ready for use. But, the ones that were already in the time line were not picking up anything, they were just off line.
    I find this stuff hard to explain so attached is a screen grab and some explanation below.
    A - Shows the panels with the media successfully linked.
    B - Shows it double clicked and opened in the source monitor.
    C - Shows where it should be in the time line. But its not linking.

    Just tried moving the source files and relinking - no luck what so ever.
    Any other ideas?

  • RMAN off line backup failed as unable to connect to database while databse

    Hi,
    I am facing below error while running offline rman backup:
    OS: HP-UX, Database : 11.1.7
    Issue:
    1. using simple shell script stopping the database then mounting it for rman backup (script is running from root)
    3. rman unable to connect to database then tried various ways to connect to database as bellow but no success:
    SQL> conn rman/rman@orcl
    ERROR:
    ORA-12537: TNS:connection closed
    while
    SQL> conn rman/rman as sysdba
    Connected.
    SQL>
    SQL> conn rman/rman
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    Process ID: 0
    Session ID: 555 Serial number: 29
    Alert log tail:
    Setting recovery target incarnation to 2
    Successful mount of redo thread 1, with mount id 3261837737
    Database mounted in Exclusive Mode
    Lost write protection disabled
    Completed: ALTER DATABASE MOUNT
    This all goes fine if I just restart the database manually
    can some help me on this......
    Thanks

    user11993192 wrote:
    Hi,
    I am facing below error while running offline rman backup:
    OS: HP-UX, Database : 11.1.7
    Issue:
    1. using simple shell script stopping the database then mounting it for rman backup (script is running from root)
    3. rman unable to connect to database then tried various ways to connect to database as bellow but no success:
    SQL> conn rman/rman@orcl
    ERROR:
    ORA-12537: TNS:connection closed
    while
    SQL> conn rman/rman as sysdba
    Connected.
    SQL>
    SQL> conn rman/rman
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    Process ID: 0
    Session ID: 555 Serial number: 29
    Alert log tail:
    Setting recovery target incarnation to 2
    Successful mount of redo thread 1, with mount id 3261837737
    Database mounted in Exclusive Mode
    Lost write protection disabled
    Completed: ALTER DATABASE MOUNT
    This all goes fine if I just restart the database manually
    can some help me on this......
    ThanksIn addition to the other comments (don't shut down the db yourself, just tell rman to do a cold backup and let rman handle the details) let me point out that trying to do any db related stuff as root is asking for all kinds of trouble. In fact, it is a general principle that root should never be used for anything that doesn't absolutely require root access. And orcle backups don't absolutely require root access.
    Bottom line is ... you must want to take this backup in the worst way possible, because that's exactly how you are going about it -- in the worst way possible. You really should spend some more time reading up on rman backups and revamp your entire approach to this problem.
    Edited by: EdStevens on Sep 25, 2011 11:38 AM

  • Clients show off-line

    I have been having this problem for some months now and simply putting up with it, but it is pretty annoying. I manage around 100 Macs.
    Clients in the Remote Desktop main window list will unexpectedly show as being off-line when they are not. I can add them back in and delete the old entry if I care to. The old entry will still show as being off-line and the recently added one right above it will show as on-line. The IP has not changed. If I double click the off-line showing entry it errors with: "Connection Failed f-9494.
    ARD Software is up to date 3.3 (451.15). I believe I started having these problems after an ard update, or my other thought is having the same machine in several lists may be contributing. Machines are not all on the same subnet.
    If a machine shows as off-line it will do so in every list it's in.
    Any recommendations are more than welcome.
    Thanks mucho,
    Tim

    Same problem here.
    ARD 3 on Mac 10.4.11

  • Unable to view in line images embedded in forum messages

    Using Firefox 4.01 on win 7 - 64
    Viewing a Yahoo forum message the in line images are not visible to me but other users do see them (do not know which browser they use)
    I can see the images as attachments - just not when embedded in the message body

    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet?

    safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet? then a couple minutes later it reconnects. I am on an AT&T wireless.

    my mac G4 does not have any problem with this. suspect it is safari, airport never drop off or turn off, just safari

  • Images are off line

    Images are off line.  There is a symbol at the bottom right of some images that has an arrow and a red line. The error is. The selected master image is either offline or not found. Please reconnect it and try again.  All I did was copy the aperture library to an external hard drive and copy it back to a newer mac book pro.  I am trying to work with the image in my new computer.

    Are you running a referenced or managed library? Try double clicking on the library to launch Aperture if it's managed. Try File>Locate Referenced Files... if it's a referenced library.

  • How do I connect to computers that are being used in the lab, but have no address listed on the "all computers" screen and say "off line" while they are being used?

    Thanks for any help I can get.  I'm the new guy here at school, and did not set up the system, so I'm not familiar with any of the individual steps for correcting problems.  My question is listed in the window up top.
    Jim

    Thanks for the response. I tried to find out what you asked.  For example:
    1. Computer #35 is listed on the "all computers" screen but says "access denied", "not authorized",  right click for " get info" has no administrators listed, and I don't know how to add my computer as one.
    2.  "Scanner" screen # 35 is not listed either in "Bonjour", or "Local Network" (ethernet interface)
    3.  "Scanner 2" screen - same.
    4.  "Scanner 3" screen - same.
    5.  "Computer Lab" screen #35 is listed, but says "off line", "access denied"
    I hope this gives us somewhere to start and go from there.  Thanks. 
    Jim

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Since most recent update of Firefox, I cannot connect to my printer; it says it is off-line, which it is not. HP Photosmart C5580

    A couple of days ago, I was notified of an update to Firefox. I declined because the details said it was incompatible with some features of my computer. The next time I logged on, the update processed automatically; I had no control. Since then, my HP C5580 printer is treated as off-line; it is not, works fine in test mode, and all connections are tight. I can not figure out what settings are messed up.
    I am not a computer genius, and am not able to be sure that is was the Firefox update that caused the problem. However, this is the only change that has been done to the computer. Is there a way to see if there is an incompatabilty?

    I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

  • TS3276 My 3 mail accounts are all off-line. How do I get them on-line?

    My 3 email accounts are off-line.  How do I get them on-line?

    If you go to Mail>Mailboxes Menu - is Take All Accounts Online and option? Does it re-connect them.
    Are the Mailboxes with different providers? If they're all the same provider perhaps there are problems at their end, rather than yours.
    I assume your internet connection isn't playing up.

  • In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?

    In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?

    My issue turned out possibly being a larger problem. 
    All of a sudden the server is in a bad, bad way.  30 minutes to get booted to the login screen.  If I try to login I get beachballs for half a second at a time.  I type login/password, the screen refreshes and I'm back to the login screen.  I can't connect a keyboard/mouse directly to it, because it wants to do the keyboard recognition (I'm not using an Apple keyboard because they're all Bluetooth and I can't get in to do the Bluetooth sync).  I can't do Disk Utility, because I can't connect a keyboard to do the key shortcut.  I can't do Hardware Test, because I can't connect a keyboard to do the key shortcut.  Can't reinstall Snow Leopard Server, because in their infinite wisdom Apple has removed the optical drive, and even if I had the optical, it wouldn't do any good because I can't connect a keyboard to do the key shortcut that would allow me to boot from the DVD.
    I tried to do target disk override from Remote Desktop but it won't let me choose my other Mac's Remote Disc as a boot option.  It also continues to show the Server as "Offline" even though power is on and it's on the network.
    I would do my 2010 Air's USB drive - just to do a Disk Utility and see if it's a drive problem - but I can't tell the Server to boot from the USB stick.
    Tried using my iMac as a monitor, that worked for a while, now it just flashes and then goes back to the iMac.
    I'm thinking the logic board on this thing is about to die.  Which is unfortunate, since my company opted out of AppleCare for this piece of equipment, and the 1 year expired last month.  So...if the repair is going to end up being $800, they're going to have to pony up for a new server.

  • Sorry, we are having some temporary server issues. You can work off line if you plan to insert pictures from your computer

    We have about 200 users that connect to three terminal servers. On the servers we have Office 2013 installed. Several users are stating that when they attempt to search for templates or insert Online Pictures, they are getting error messages of "Sorry,
    we are having some temporary server issues. You can work off line if you plan to insert pictures from your computer"
    Remember, they are connecting to a terminal server, all have roaming profiles, and for some users this works fine.
    We've Googled the error message and found no help. A lot of responses was to reset the IE settings, which we've tried to no avail.
    Also as a test, we took one of the users that was having the issue and deleted their profile. When they logged back on the server, the same problem occurred again.
    We're currently at a loss as to why it works for some users and not others?
    Any ideas out there?

    You can refer to this link and find the possible solution which is to delete the offending registry key:
    HKCU\Software\Microsoft\Office\15.0\Common\Internet\WebServiceCache\AllUsers\office15client.microsoft.com
    http://angrytechnician.wordpress.com/2013/05/15/office-2013-error-sorry-we-are-having-some-temporary-server-issues/
    There we can also find information about deploying logon script to all roaming profile users to resolve this issue.

Maybe you are looking for