Office Control does not display word document

HI all,
I followed the example code to display a word document in the office Control UI, but the display remains blank when I push the button to 'show document'.
I do not have MS Office installed on the server so I have a wordpad named example.doc on the C drive. Can I read the data from wordpad and display it on the Office Control?
Thanks
Jay.

> Thanks all,
> I have Office 2003 installed on the client but not on
> the server. The bytes[] array gets loaded with the
> string '[B@10e770f', but the display stays empty.
>
> Jay
Hi Jay,
I need to use this feature as well. Did you get it to work. Can you display and edit a Microsoft Word document from within a browser page. It would be good to know that you have been successful.
Jesse

Similar Messages

  • Help! Bridge does not display Indesign Documents as spread thumbnails anymore.

    Adobe please fix this issue. Adobe Bridge CC and (also CS6) does not display Indesign documents as spreads like it always used to. It displays a preview of the left hand page only not both left and right. This is very frustrating as this was a very useful feature from day one. Why is it not there and what can you do to get it reinstated asap.

    Moving this discussion to the Bridge General Discussion forum.

  • Docx file association is set up correctly but does not display Word icon when viewing in Explorer

    Problem with MS Word as part of MS Office 2007 Professional Plus running on Windows 7.
    When I view a folder in Windows Explorer all docx files show up with a plain white icon, not a Word icon. I have done the following:
    Start > Control Panel > Default Programs > Associate a file type or protocol with a program.
    Then scrolled down the display and selected the docx extension - it already shows as Microsoft Office Word - clicked on Change Program, reset the program to WordPad, then back in the display clicked on the Change Program icon again. This tiime I reset it
    to Microsoft Office Word.
    However when I go back into Explorer the icon has not changed. Even if I close it down and restart it again. And even after a reboot.
    Also, I have checked the individual properties of the docs files, using Explorer, and they do say Open With Microsoft Word. So no problem there either.
    Any suggestions welcome as to how to change it so the icon displayed is Word not blank.

    Hi orchestrand,
    I have the same problem as you and after searching for a day for a definitive solution, i have found this one that works on another forum located here: http://www.sevenforums.com/tutorials/49819-icon-cache-rebuild.html
    The reason seems to be that icons stored have for some reason disappeared (inexplicably?). The solution is also stupidly simple after i've tried every suggestion in this thread.
    1) go to start menu and search for: cmd
    2) right click on cmd and choose "run as administrator" (--> this causes command line to change from C:\users\<account name> to change to: C:\windows\system32).
    3) turn off everything you are doing after saving your work because now you will be closing explorer.exe
    4) in the command line enter each command separately and with enter following each line
    taskkill /IM explorer.exe /F
    CD /d %userprofile%\AppData\Local
    DEL IconCache.db /a
    shutdown /r
    5) after the restart, everything should be back to normal.
    This is a complete fix for the problem and not a work around and I can verify that it worked for me. Good luck all.
    also, this is a repost, but i think we have the same problem

  • Output Does Not MATCH Word Document

    Everything is fine till it reaches page 76 (of my 388 page document) and the phrase: District of Columbia.
    The original document does not wrap District of Columbia, but the PDF file does.
    I am using the PDF printer.
    The problem is that District of Columbia is a bookmark linked to the table of contents. I see that during creation of the PDF file, Word goes into a mode that shows hidden text in bookmarks, etc. This makes the phase District of Columbia even longer than it normally is.
    A work around I am considering is choosing an oversized page for printing, but the names are criptic and I'll have to look up each to find out which would work. I'm very stuck. I have three other programs that can make a PDF out of the document in just minutes, but the links/bookmarks don't work at all.
    Creation using Acrobat (v XI) takes six hours. There are that many bookmarks in the document.
    Any suggestions?

    My guess is that you are looking at the DOC file with a laser printer or any other printer attached in the print menu. WORD reflows documents to be consistent with the attached printer. You are probably lucky that you made it through 75 pages before there was a problem. The 6 hours is also unreasonably long for the processing of 388 pages, unless everyone might have been a graphic. But even then, that is a huge amount of time.
    You are probably using PDF Maker (create PDF menu), but you should still attach the Adobe PDF printer and go through the document before printing or using PDF Maker. Also, go through the preferences in the create PDF menu to select only those things needed. Tags are good for recreating the DOC file (but it is better to not get rid of the DOC file in the first place). The other use for tags is accessibility -- that is often needed, but you might want to try turning it off to see the results.
    So, bottom line is to attach the Adobe PDF printer in the print menu and then go through the DOC file to check for the format you are concerned about and see if that duplicates what you are currently getting on p. 76. If it is the same, then you are seeing a standard process by WORD.

  • Primary layout does not match word document

    I named an RH project with a name the programmer cannot use.
    I tried to rename the project. 2 days later, I am in a mess. I
    bring up RH Explorer and click on its word document icon. I change
    information in the word document, compile and look at the 'View
    Primary Layout'. The document showing in the layout is not the
    document I just edited. How do I get the correct word document to
    be compiled and appear in the primary layout screen? Note: this
    happened after I lost RH and had to reinstall. See other
    posting.

    My guess is that you are looking at the DOC file with a laser printer or any other printer attached in the print menu. WORD reflows documents to be consistent with the attached printer. You are probably lucky that you made it through 75 pages before there was a problem. The 6 hours is also unreasonably long for the processing of 388 pages, unless everyone might have been a graphic. But even then, that is a huge amount of time.
    You are probably using PDF Maker (create PDF menu), but you should still attach the Adobe PDF printer and go through the document before printing or using PDF Maker. Also, go through the preferences in the create PDF menu to select only those things needed. Tags are good for recreating the DOC file (but it is better to not get rid of the DOC file in the first place). The other use for tags is accessibility -- that is often needed, but you might want to try turning it off to see the results.
    So, bottom line is to attach the Adobe PDF printer in the print menu and then go through the DOC file to check for the format you are concerned about and see if that duplicates what you are currently getting on p. 76. If it is the same, then you are seeing a standard process by WORD.

  • The control of adf media does not display even the Control attribute is set

    Hi
    I am trying to play a clip in a jspx page. I use an ADF media to embed the file and play the file by quicktime. I set the control display attribute to "all" or "typical" but the control does not display when the browser(FF) display the clip.
    Can anyone help me?
    Thanks

    try adding mime-mapping in web.xml. Just a suggestion and I haven't tried this control.

  • Finder does not display icon for word / excel in list view

    Hi,
    I got a new macbook air, with Yosemite pre installed. I copied over all my files (from my old macbook using a USB drive) and next I installed MS office for mac.
    For some reason Finder does not display the correct excel of word icon in list view (I set preview thumbnail to NO in view options), but it it displays the generic file icon.
    It appears to be very random, as some files do display the icon and others do not. It also appears to have nothing to do with the doc/docx xls/xlsx variations.
    Also some of my parallels icons do not display correctly in list view.
    When I open a INFO panel, it does show the correct icon. Example below:
    Any body know how to reset / fix this ?

    Still got no solution...
    There has to be some one that knows about this ..?
    Any professionals reading this that can point in some direction for a solution?

  • After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

    After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    No on the book title, no problem there.
    The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
    Thanks for getting back to me.

  • Printer will not print word documents or documents from internet however does a test print

    My printer will not print word documents or documents from the internet.  However it does complete a test print.  I have uninstalled and reinstalled printer.  I have disabled and enbled the firewall and have run the test doctor programme, which has been unable to identify any problems.  I have a HP deskjet 3050A all in one J611 series printer.

    Sorry that you are having a problem with printing word documents and internet. 
    Are you connected USB or wireless?
    You can try to download an alternative driver and check to see if that works. (Shane_R) has a great post on how to do so. 
    The deskjet 990c is usually the better one. 
    http://h30434.www3.hp.com/t5/Printer-All-in-One-So​ftware-Drivers-e-g-Windows-8/How-to-Assign-Alterna​...
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Followon Documents does not display PO

    Hi,
    We use SRM 4.0 SP13 with classic scenario.
    We recently upgraded backend to ECC 6.0 and ran into an issue where we do see PO replicated to SRM when viewed using BBP_PD but it does not display under Follow-On document---> History.
    I looked at some notes, but not sure if they help as only I1113 is only active.
    Note 729967 - Shoppng cart:Status I1111,no follow-on docs->analysis report
    Also any other notes that could be useful.
    Note this issues is consistent and not for a few SCs.
    Thanks,
    Nikhil

    Hi
    It turns out that SRM does not support "stock transfer", even though this may be supported by other SAP Applications.
    SAP suggested In order to resolve this issue, you could enter the following codes:
    We plan to try it later after our current release is implemented.
    In MAP_ITEMS (LBBP_PDMAPF01) you can find this coding:
    LOOP AT i_be_items WHERE ITEM_CAT EQ c_item_cat_mat OR
    ITEM_CAT EQ c_item_cat_third.
    In your case, we enter this coding with the following:
    i_be_items[1]-item_cat = 7 -> Stock Transfer
    I would suggest that you try a modification here:
    LOOP AT i_be_items WHERE ITEM_CAT EQ c_item_cat_mat OR
    ITEM_CAT EQ c_item_cat_third OR
    ITEM_CAT EQ 7. " Modification for Stock Transfer
    Thanks,
    Nikhil

  • Using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel

    using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel.
    double-click opens Excel Office 2011 for mac without the document.
    It should open the document in Excel 2010 for Windows.

    In Parralells, choose the file you want to open.
    Right Click on it and choose Properties.
    In the General Tab you will see "Opens with:"
    Click the "Change ... " button.
    Then choose Excel 2010. The checkbox below should be set to "Always use ... "

  • Pages does not display on Mission Control

    I use three fingers on the trackpad to initiate Mission Control.  Even though I have a document open under Pages on my desktop, Mission Control does not show me an image or icon for pages that I can select.  I see a vertical white line where the icon should be, but I cannot select it.  Do I not have an option to select Pages from Mission Control?  The same thing happens when I hit F3.
    I have a Macbook Pro.
    Thanks!

    That's what I mean...it does not have its own pile.  Pages does not appear at all when I go to MC, even though I have it open on my desktop.  When I move windows around to bring it to the front and go back to MC, the document dissappears to a thin vertical white line in MC and my other open programs have their own pile.  When I exit out of MC, the document appears from where the thin vertical line is.  I can't click on the line either, so I'm not sure what the problem is.  I've restarted it three times and nothing has changed.

  • 2002 G3 600 mhz iMac display stays dim with an unidentified sign displayed.  The contrast control does not work.

    My display screen is dim and the contrast control does not work.  There is a sign on the screen that I have been unable to identify.  It is a white circle outline with a half moon solid circle within it.  Does anyone know what's wrong?

    There is a sign on the screen that I have been unable to identify.  It is a white circle outline with a half moon solid circle within it
    That would be a screen contrast symbol     
    My display screen is dim and the contrast control does not work.
    Did you reset the PRAM? http://support.apple.com/kb/ht1379 And the pram battery may need to be replaced if it is over 3 years old it is under the iMac under the ram cover and there is a little button in there to reset the pmu as well. you have to have it pluged in when you do a pmu reset. there is a lot more stuff to try before the worst case scenario that is a bad PAV board the Pav is what runs the monitor and if it is going bad That may be a syptom that it is haveing and they can not be fixed (Well not for under $250 and that is useing old parts because they do not make them any more) but that wood be worst case scenario. Lets just hope it just needs to be reset Try that and Keep us posted

  • REMOTE app on iPhone does not display Cover Art

    I use the Apple REMOTE App on my iPhone to control my iTunes music library on a Mac. The REMOTE App controls the iTunes playback properly. However, the Cover Art for each song does not display on the "song" screen - showing the song currently playing. Across my iPhone screen (where the Cover Art should appear) are the words containing album of the song). The name of the song and album correctly appear at the top of the screen.
    What is interesting is that when I hit the back arrow (left side top on song screen), all of the Cover Art appears in small thumbnails. The Cover Art also appears in other displays (for example, the currently-playing Album) using REMOTE on my iPhone. This means that the cover art is being transmitted to my iPhone - HOWEVER IT DOES NOT DISPLAY ON THE SONG SCREEN.
    Can anyone kindly help me resolve this - because I would really like the Cover Art to display properly on the song screen.  Thank you.  Dale

    Nezmo, This is really unbelievable.  I have suffered from the issue I described for SEVERAL YEARS.  Today, for some reason I decided to make this post on the Apple discussion board.  And, today the issue was fixed by Apple.  I just downloaded the update to the REMOTE app and the cover art now shows beautifully on my iPhone 6 plus.  Thanks.  Dale

Maybe you are looking for