Officejet 7410 Driver for Windows 10 does not find my wired (Ethernet) printer during installation

The driver apparently didn't install completely because I can't run HP Solution Center. I can access the web server on the printer by using the IP address in a browser. I set it to a static address. The driver seems to install except that it won't find the printer when I select a wired network printer. This printer has been working for years with Windows 7. Surprisingly, I can still print, but I can't scan since the Solution Center won't run. If I use the print and scan doctor, it tells me I need a new driver, but if I then try download it from that program, it always fails. I have installed the driver with a data of Aug 3 2015. That seems to be the latest one. I don't know whar else to do. I need some help.

Welcome to the HP Community , I hope to help you with the installation issues you're having with your Officejet 7410 on Windows 10. Below are some suggestions I have for you to try. Let me know what happens. If you see any error codes or messages, please tell me the specifics. Start with power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Perform a Clean Boot on your computer:1. Begin by typing “msconfig” in the Cortana Search Box and then click on MSConfig (Run Command)
Or on your keyboard press the Windows + R key at the same time and type Msconfig in the run window, then click on OK or hit enter.
2. Now choose Selective Start-up
3. Remove the check from Load Startup Items
4. Click on the Services tab
5. Check “Hide all Microsoft Services” and then click on Disable All
6. Click on Apply and then on OK. 7. Click this link to download the full driver and software: HP Photosmart and Officejet Full Feature Software and Drivers Now open up the software and try scanning, and try printing too! Reminder: Go back in to the Clean Boot instructions and enable the start up services! Good luck Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

Similar Messages

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Installed HP Officejet 4100 All-in-one does not appear in Control Panel printer selection window.

My HP Officejet 4100 Series 'All-in One' DOES NOT APPEAR in the Control Panel window even after several re-installs. The diagnostics indicate that the 4100 is not connected and dos NOT point to any path for a solution.
Attempts to download a current Driver, ( or re-load the 4100 "software" ), WILL NOT work because the 'help' page states the driver already comes with the 4100 software and therefore does not provide for any download update, (driver or software) for the 4100 printer.
I have reinstalled from the original Disk for the 4100 and also attemped install with Windows Update requested driver. Nothing works.

Hi there @Past77
Welcome to the forums
I read your message about your Officejet 4100 not showing that it's connected, and that you have attempted to run the Windows Update to see if that would help get the printer working again. You are correct that this model does not have a downloadable driver for Windows Vista, so your best bet would be to try running the Print and Scan Doctor tool, to see if it can kick the printer into gear and have it functioning again.
If the tool does not work, I would then recommend looking in to a printer upgrade. Consider giving us a call to see what your options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes to you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

T60 hard drive replacement - Windows does not recognize the hard drive

Hello All, new to the Lenovo Community. I have a T60 as well as newer Lenovo Edge. The HD crashed on the T60 and it will no longer boot. I just purchased a WD 500GB without doing a lot of research. In trying to install Windows 7 (I had already upgraded the T60) it will not recognize the new drive - Windows does not see the drive at all. Is there a way to get the Lenovo to recognize the WD drive? Thank you in advance for any help.
Solved!
Go to Solution.

Glad I was able to help.
Just be careful, the usual "if it doesn't fit, find a bigger hammer" doesn't apply to this model laptop.
Also, there is a part available to adjust the frustration level, I don't happen to have the FRU number available, but I do have a photo and I'm sure you can find a local shop to provide it. Any experienced vendor should be able to match up a similar item from this photo.
It comes in many varieties, this model has a handy extention to aid in installation so you can easily do it with one hand. Others may require two hands to safely install. Use care when installing, one slip can destroy your laptop. Acute abuse can lead to severe embarassing situations and cronic abuse can have impact on your health, so use wisely and always get a spare to share with a friend. They tend ot come conviently packaged in quantity of 6, so you can invite a few friends over.
This invention has saved many a laptop from sailing out of windows worldwide.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

Latest Nvidia Driver for G560 does not install!

Hi,
i've tried to install the latest nvidia driver for my G560. But it seems like the only driver working on this system is the preinstalled driver from Lenovo.
I always get the message that the driver can't find the required hardware. I've downloaded the correct (Win 7 64 Bit) and latest driver from Nvidias webpage. I've even tried some older drivers from the drivers archive.
Does anybody have a clue how I can solve my problem?
Greetings Cpk83
Solved!
Go to Solution.

It does look like the correct driver. But I noticed this "Note: The following notebooks are not supported in this release: 1. Notebooks supporting Hybrid Power with Intel chipsets. 2. Fujitsu notebooks – support will be added in a later release. Fujitsu Siemens (FSC) notebooks are supported in this release. 3. Sony VAIO notebooks – support will be added in a later release. Sony VAIO Windows 7 users can click here for driver update support. 4. Any notebook that is launched after the release date of this driver. " Does anyone know if this laptop has Hybrid Power? Also here is a good tip/recommended from ATI. "Advisory: The display driver supplied by the laptop manufacturer is customized for the built-in flat panel display, and the graphics features and functions specific to the laptop. It is strongly recommended to use the supplied drivers. If installing a different operating system other than the one included with the laptop, the laptop may not meet all the requirements, and supported drivers may not be available. The laptop manufacturer is the exclusive provider of driver updates. If the required driver update is not available at the laptop manufacturers’ website, it is recommended to contact the manufacturer directly, to see if an updated driver will be made available in the future."
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Need Officejet 4355 driver for Windows 8

Can anyone suggest me where to download printer driver for Officejet 4355 under windows 8? My brand new laptop that use Windows 8 OS can't recognize my officejet 4355 printer. I've searched several times for the driver over the internet, but can't find one.
Please help a.s.a.p.

Hi Priyayi_Jowo,
Install a Windows 8 Driver with Windows Update
With this basic driver, some of the buttons on the printer do not function and some of the advanced printer features are not available. For more information about your driver and to see workarounds, see the Frequently asked questions section.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

Satellte C870 (PSC8EE) - Display driver for Win8 does not install anything

Hi,
I have a Satellite C870 bought in october last year.
I upgrade it from Windows 7 to Windows 8 a first time just before Christmas and worked fine.
(Some small issues suchas Bios upgrade needed before installing the display driver but all worked well)
Few days ago I had a system crash and the HDD died.
Send out the Sateite for HDD replacement and got it back with Windows 7
Started last evening installation back to window 8 64.
But the display driver from Toshiba site does not install anything ? Not even catalyst....
Just get the request to confirm if I want to install the product and then nothing...
Tried both drivers proposed from 19/02 and 26/02 but with the same result....
Tried to install the driver directly from AMD ad got a message my card was not supported
Tried Windows 7 driver from Toshiba site for my machine and got the same message....
Graphic card is an AMD 75610M
And of course I have admin access, and also tried to launch the Setup files in admin mode.
And other drivers install normally (Lan Drivers, Wifi Drivers, Tempro, Eco mode etc)
Thanks for your Help

Thanks for your kind answer ....
I had unfortunatly tried this option already before posting...
Should have been more explicit in my post....
*I have a solution working right now as I finally achieved to install Drive 13.1 from AMD site.*
Even though I had to proceed with a manual installation.
Sill consider a pitty the file from Toshiba is not working.

HP Pavilion G6 1200tx amd radion display driver for windows 10 not available..

I just upgraded my pc from windows 7 to windows 10 but, unfortunately the amd display driver did not work for the upgraded version.. searched the hp support for windows 10 drivers but apparently they do not hav any drivers for windows 10 for this pc..my pc model HP Pavilion G6 1200tx. Please suggest any solution.

You're very welcome. Please send me the link to that driver, so I can help other forum members who install 32 bit OS' on that model series. Thanks,

I have moved my Itunes media folder to an external drive and Itunes does not find the items in the folder

Running Win7. I moved my entire Itunes library to an external drive to free up space on my laptop. Itunes recognized the change and all was well. That worked fine and I have synced several times from the laptop with the library on the external drive. Now the laptop is in the shop (sigh, not Itunes related a dead network card). I connected the external drive to my desktop, made sure my software was up to date. opened ITunes went to edit/preferences/advanced. Went to change Itunes media folder location and navigated to the proper folder on my external drive and clicked OK. None of the music, videos, etc, that are in that folder show up in iTunes on the desktop. Restarted ITunes, no help, reboot computer, no help. Have I done something wrong or left out a step. I could copy all the media onto the desktop individually and build new playlists but that seems like something that should not be needed? One of the reasons I moved my Itunes media folder to the external drive was so I could use the laptop for iTunes while travel and the desktop for iTunes while at home. Do I have to copy the entire folder to my desktop and take up space there? That would be counterproductive to using the external drive. I searched and saw a hint to hold down shift while starting ITunes but that did not change anything. Any help would be most appreciated!
Jim in WV

Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow? In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

ITunes for Windows does not delete podcasts when told to.

I have 30 podcasts. When I try to delete a selected podcast using either the delete key or right-click menu, I then tell iTunes to "move to recycle bin". However, many times the file remains. I just found >1GB of left over podcasts that did not show up in iTunes but are in the "My Music\iTunes\podcast.." directories.
is this a known bug or am I missing something?
Is there anyway to fix this?
Shane

In order to delete the podcast, start playing another track first. Sounds like the same bug that affects TV shows. The currently selected show will not go to the recycle bin, though it will disappear from the iTunes library. It's as if iTunes tries to move the file to the RB but Windows says, "No, that file is in use."
I discovered this bug after my laptop hard drive ran out of room because none of the TiVo2Go shows I'd been watching for weeks had truly been deleted by iTunes when I asked it to. All the files remained on the hard drive.

New safari update (5.1.2) for windows does not load any webpage. i can open safari but nothing happens.

why wont it load?

Try this:
Bring up the Windows Task Manager.
Look for a process called: "WebKit2WebProcess.exe" and there may be a *32 after the name.
Now Look for a "Safari" process, there may be multiple instances, but the primary instance will be identified by the significantly more memory that it uses.
Kill both processes.
The Kill order may be important.
If the WebKit process is running alone kill that first, and try to relaunch Safari.
If a Safari process(s) is running, Kill the primary instance, The WebKit process should also go away but if not Kill WebKit too.
It may take more that one launch attempt to clear the memory.
Further,, you will likely have to do this at each Safari launch because these processes become unstable after short use - until Apple fixes this bug.
-Alan
Ps: I have no issues what so ever on Lion, just Windows 7

ITunes store for Mac does not find albums, iTunes store for iPhone is OK

When looking for an artist on iTunes store for Mac, the search returns no result.
When looking for the same artist (Paddy Milner in the Music store), I can find this artist in iTunes store for iPhone.
I tried another artist (Alice Russell), same thing.
Is there something happening with iTunes store for Mac?

After upgrading to iTunes 12 on WinXP it did not connect to Gracenote.
I found this solution.
Solution:
Exit iTunes
Press the WinLogoKey+R
Type in %appdata% and press return
Double click on Apple Computer
Double click on iTunes
Take a back up of the file iTunesPrefs.xml as a precaution (copy to some safe area)
Delete the file iTunesPrefs.xml
Start iTunes again
Good Luck!
Music Lover 1954

Firefox update 8 for windows does not recognise me as an administrator. Windows 7 home control panel shows i am an administrator. What gives and how can i make the update?

hardware: Lenovo G56 laptop
OS Windows 7 Home
usual logon is using Veriface, but that executes my password.
The upgrade window asks to choose between two profiles:
one is mine, where username and password are pre-filled and greyed out, the other is called Administrator, with no password. If I insert my password in this field it saya 'no such account' and if Is elect my own logon (I am the only user btw!) it says I do not have sufficient privileges!
I am going to create a second user, also an Administrator, and see if that might overcome this issue...

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup

Officejet 7410 Driver for Windows 10 does not find my wired (Ethernet) printer during installation

Similar Messages

Maybe you are looking for