OGG help for two simultaneous inserts

Hi all, i am working on bi-directional golden gate active-active environment, i was successful in designing it and also i was successful in using some strategy to find out if any two updates happens cancel old one.
I was also trying if any kind of same strategy can be used for inserts, i mean on source side i am inserting a records with values
example:
insert into tables values ('1','2',systimestamp,'3','4');
I was inserting different vales on target side for same PK value, example:
insert into tables values ('1','5',systimestamp,'6','7');
I am seeing different results on both sides, is there any strategy to use compare which one is new and apply new by discarding old insert?
Thanks in advance.

Conflict resolution, using timestamp. Page 94, admin guide. You'll have to compare adjusted values since yours are in different time zones, but same principle applies.

Similar Messages

Can you use a single webhelp file to display different help for two apps?

I have updated a WebHelp project for a Windows app (let’s call it App1). Now the Dev team is creating a separately installed app (lets call it App2) that shares some of the same Help information as the original app. Both apps can be installed on the same system. The Help for App1 is accessed from an About menu in the app UI. Some of the topics are dialog boxes accessed from a question mark icon (?) at the bottom of the UI (I assume map IDs are involved in hooking up the dialog box Help - I need to verify this with Dev). The Help for App2 will be accessed from the App2 UI, which looks very similar to the App1 UI, except that certain features in App1 are missing from App2.
Here are the parameters:
In some cases, entire Help topics will apply to both apps.
In some cases, a portion of a topic for App1 will also apply to App2.
In some cases, a topic or topic portion for App 1 does not apply to App2 and vice versa
I’m using Robohelp 9 (RH9). Is there a way to allow App1 to display only the WebHelp that is relevant to that app and for App2 to display only the WebHelp that is relevant to that app? Is there a solution that would allow me to use one Help project and build only one Help file, with the result that App 1 displays only the Help it needs and App 2 displays only the Help it needs? Would conditionalizing the Help and providing two sets of WebHelp be the solution? Or is there some other alternative?

You could do it in a couple of ways – one way is to have 1 project & use conditions to generate 2 flavours of WebHelp output, one for each App; the other way would be to use one project and create DUCC flavoured WebHelp – that way the use would choose to read the appropriate flavour of help for their App.

F4 help for two fields in screen

hello,
I have two fields in my table control which need F4 help in the screen.
But one F4 search exit is implemented, but it populates only one field.
but, on clicking f4 for one field, it should populate both the fields together.
do help me with this issue...
Can POH in the screen populate up two fields together???

Hi Krithika ,
In addition to checking up the export parameters for the Search healp you will have to define the Search Help attachment also. I'll paste the SAP Help Text below but in Simple terms
You Define a structure with the fields to be returned and define the screen elements based on that structure . So on selection the structure is returned with all values and the screen elements are in referance to structure so all values get posted in screen.
Here is the SAP HELP part
"" From SAP HELP
A search help attachment is an assignment of a search help to a table, structure or data element, causing the corresponding search help to be automatically used to describe the input help process at this field when an ABAP Dictionary field is used in a screen.
You can attach a search help as follows:
1. Attach a search help to a structure or table field: The attached search help is available for all screen fields that refer to the table or structure field. There must be an assignment between the interface parameters of the search help and the fields of the table or structure for this type of attachment. In the input help process, this assignment results in a value transport between the corresponding fields (if they are known at least to the module pool of the screen) and the search help parameters. As for the foreign key definition, you can assign nothing, a constant or any other field (which is then sought in the module pool) to indivdiual search help parameters.
2. Attach a search help to a table: The assigned search help is available for all screen fields for which the table is a check table. There must also be an assignment between the search help parameters and the key fields of the table for this type of assignment.
3. Attach a search help to a data element: The attached search help is available for all screen fields that refer to the data element. If the search help is attached to a data element, an export parameter of the search help must be assigned to the data element. If the user chooses a row of the hit list in the input help, the contents of this parameter are returned in the corresponding screen field. More than one value is not returned when a search help is attached to a data element.
The described attachments only take effect if the field was not yet assigned an input help in the screen definition. Such an assignment can be made with the mechanism PROCESS ON VALUE-REQUEST in the flow logic or by attaching a search help to the screen field in the attribute maintenance screen. A F4 help can also be assigned to the field in the flow logic by using VALUES or SELECT. In the latter case, the input help here behaves as if the table specified under SELECT were assigned to the field as check table.
If more than one of the described mechanisms compete in defining the input help method of a screen field, the first one named will take effect. If none of the described mechanisms is available, the domain fixed values of the field will be used for the input help if necessary. If the domain of the field has no fixed values but has data type DATS or TIMS, the input helps that are assigned to these types are used for the input help. Otherwise there will be no input help available for the field.
A search help attachment always belongs to the definition of the object to which the attachment is made (structure, table or data element). It is also maintained in the maintenance transaction for this object and transported with this object.
<b>REWARD IF USEFUL. It Works for me here..get back if any doubts.</b>

Need help for two thing:: JFace/SWT and Drawing an updating graph! plz help

Hey all,
This is my first post on this forum and I was wondering if you guys can help me with two problems that im currently having and I would be really grateful.
1. When ever i try to use the SWT/JFace tools and run it as a java app. I get this error:
java.lang.NoClassDefFoundError: org/eclipse/core/runtime/IProgressMonitor
Exception in thread "main"
any suggestions??
2. Now this is my main question:: How should I go about programming a graph that updates based on numbers in an array? Basically set of numbers in an array ( unsorted ), and as it is getting sorted I want a graph displaying how it is getting sorted. The graph is just a basic XY chart.
Thank you.

@n2medallas,
Let's get your phone working right!
You mentioned your getting a message that the phone is rooted. Where are you seeing this message? What is the current bilud and software version on your phone? Have you taken the phone into a VZW store to check the message you are seeing?
JohnB_VZW
Follow us on Twitter @VZWSupport

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

HT1904 I HAVE SPOKEN WITH APPLE AND THEY HELPED ME AS I HAVE CANCER AND THIS IS MY COMFORT THE VIDEOS HELP TAKE AWAY MY PAIN,NOW THE ID AND PASSWORD ARE NOT BEING ACCEPTED AGAIN IHAVE HAD SAME FOR TWO YRS .

I am having a problem with loging in to my apps as i have had same id and password for all and for two years . youtube music video's helped get through the pain of cancer and the computer help me conect to my friend then i went to mail and i was recieving nothing my doctors all have same passwords and lawyers ,and it would be hard and i could never remember many password changes as i was fine with ,now this is second time google caused this problem and said i must change password as i belived again and did with out anyone accepting it .i con not recieve mail, or go to face book,or google search as was my only browser and they will not accept my id as they say it is wrong as does all othe web sites as well as youtube i am at a loss . please help me . Sincerely Debra Rossi Jones
<Email Edited by Host>

We are fellow users here on these public forums, you're not talking to iTunes Support - I've asked the hosts to remove your email addresses and password from your post. If that is your current password that you've posted for everyone to see then you should change it IMMEDIATELY.
I'm not sure that I understand all of your post. By 'google' do you mean your gmail email accounts ? If you do then how are you trying to access your email, via the Mail app and/or another app on your phone, the Mail program or a browser on your Mac ? If you are using the Mail app on your phone and you've checked your email account's password then you should be able to add that new password on your phone by tapping on the email account in Settings > Mail, Contacts, Calendars, then tap on the 'account' at the top of the next screen, and you should then be able to enter the new password. If you are using the Facebook app on your iPhone, and you've changed the password for logging into Facebook, then you should be able to update it on your phone via Settings > Facebook
If you are using the Mail app on your Mac, then to change your gmail password in it (assuming that you've changed the password for it) then go into Mail > Preferences (command-comma), select the Accounts tab on the preferences, select the gmail account on the list of accounts, and on the right-hand side of that screen you should be able to update its password.
If the problems are on your Mac then you might be better off re-posting in one of the other forums (e.g. Safari, and there are forums for various Mac OS X versions), and there is also a Using iPhone forum - this forum is for the iTunes Store e.g. buying, downloading content from iTunes.

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

Dynamic value help for a table field to fill two fields, how to?

Hi all gurus,
In SRM 7 I defined a dynamic value help for a single field (ZZ_PROLE_R3) of my header custom table.
That's the code from WDDOMODIFYVIEW in the webdynpro /SAPSRM/WDC_DODC_CT, view V_DODC_CT:
DATA: lo_tabnode        TYPE REF TO IF_WD_CONTEXT_NODE.
      DATA: lo_tabnode_info   TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
      DATA: tab_value         TYPE WDR_CONTEXT_ATTR_VALUE_LIST,
            wa_value          TYPE WDR_CONTEXT_ATTR_VALUE.
      lo_tabnode = wd_context->GET_CHILD_NODE( name = 'THCUS' ). "the custom table node
      lo_tabnode_info = lo_tabnode->get_node_info( ).
      wd_this->GET_VALHELP_ZZ_PROLE_R3( EXPORTING iv_guid = lv_guid
                                        IMPORTING ZZ_PROLE_R3_VALHELP = tab_value ). "this method returns the dyn value table
      lo_tabnode_info->set_attribute_value_set( name = 'ZZ_PROLE_R3'
                                                 value_set = tab_value ).
The method GET_VALHELP_ZZ_PROLE_R3 dynamically builds the value help table tab_value; such table is made up by two fields:
value : contains the value of the field
text   : contains a description of the value
The above solution works; now I'd like to enhance it. The custom table THCUS contains also a field called ZZ_PROLE_R3_DESC, which represents the description of ZZ_PROLE_R3. It is, exactly, the TEXT field in tab_value.
So I'd like to do as follows:
- the user clicks on the search help for ZZ_PROLE_R3 field of the table;
- the above described value help appears;
- after the selection, both ZZ_PROLE_R3 and ZZ_PROLE_R3_DESC are filled with the selected couple value - text chosen from the value help.
Could anyone help me achieving such a behaviour?
Again, a little request... when I open the above value help dialog box, the window itself has a label "Floorplan Manager application for OIF.." that obviously I'd like to redefine (e.g. "Role selection value help"). Is there any way to do that?
Thanks in advance

Chris Paine wrote:
It seems to me - given that your code is in wddomodifyview that you are trying to have different dropdowns per row
- I'm not sure where you are populating lv_guid - but I'd guess it is an attribute of the row selected? If it isn't then I can't see any reason that you would do this code in wddomodifyview and not wddoinit.
Hi Chris and thanks for your help,
lv_guid is the GUID of the document's header; I need to pass it to the method that populates my value help table because the values in it are derived from some fields on the document. (the situation actually is more complex; there's an RFC call on the backend for which the document is intended for to retrieve the data that populate the value help...).
I'm quite unexperienced on webdynpro and terminology; if dropdown menus are fixed selection option that appears on a field, I guess this is not my case. I did a pair of screenshot to provide an idea of what the solution by now is, and what "I would like to have":
[Pre-selection (F4 icon on the field in table)|http://imagebin.ca/view/npIsaqF.html]
[Value Help popup for the field ZZ_PROLE_R3|http://imagebin.ca/view/8fZUh3T.html]
[Result by now |http://imagebin.ca/view/3PaqdvE.html]
[Result I'd like to have.|http://imagebin.ca/view/dExR0J.html]
Chris Paine wrote:
However - by your comment on the "value help dialog box" I am guessing you are using an input field? If this is the case then I would strongly suggest that you change/enhance the structure of the context node THCUS (btw, better coding practise to refer to it as wd_this->wdctx_thcus when using the get child node construct) so that you refer to an actual SAP ddic search help, if you then associate in the structure the value and text fields then populating the text field should happen automatically. Also you'd have the nice side effect that your value help dialog would be named after the associated ddic search help.
Thanks for the code suggestion, I'll apply that. For what concerns the context node THCUS... It is, by standard, a node which I can't explictly find in the context for the view V_DODC_CT. The problem is that ZZ_PROLE_R3 and the corresponding description field ZZ_PROLE_R3_DESC of the table must be filled with data retrieved dynamically @ runtime from the backend. So I guess I can't populate a val help referring to a dictionary table/field; I'd rather do as follows:
- retrieve what's the target backend for the document (to do so, I have to process the document .. that's why the header guid passed to my method);
- RFC call to a custom method that extracts possible values for the specific backend;
- bind the ammissible values to the value help.
Chris Paine wrote:
I realise that this is rather a lot - so if you have any specific question please do respond - hopefully I or someone else will be able to clarify.
Thanks again for your help; additional info as well as code examples would be highly appreciated

I have been editing project for two weeks and now I get ghosts of other images fromt eh project coming up in the wrong places even though the thumbnail looks right. Help.

Help. I have been editing a project for two weeks and now it gets ghosts of ohter images from the project coming up in the wrong places. The thumbnail has the correct image but the image either does not display and its black or an old image or another one shows.

When I have problems like this I do two things. First I shut down and restart iMovie. Sometimes that rejuggles the date. But I am sure you have been doing that in such a long project.
The Second thing I do is delete iMovie preferences, which can get corrupted.
Home-library-preferences-com.apple.imoviepref
Hugh

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7

TS1702 On my Page Tool Bar I don't get the icons for info and insert. Please help

When I open my Pages Program I don't get the icons for 'info' and 'insert'. Please help

I'm having the exact same issue. Any help is appreciated!
Thanks!

TS3694 I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this

I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this on the apple site

If the phone has been hacked, we can not offer advice on Apple's support site.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

HT4993 I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mo

I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???

Settings > General > Reset > Reset Network Settings

My iPhone is stuck in the recovery mode after downloading iOS7. i Tunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?

My iPhone 4 is stuck in the recovery mode after downloading iOS7. iTunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?

Hi Imw7996,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Judy

OGG help for two simultaneous inserts

Similar Messages

Maybe you are looking for