OID multiple plug in with AD issue

Hi folks,
I have a problem here, I have two AD directories a1.domain1.com and a2.domain2.com
I don't have problem configuring external authentication against multiple domains by [http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b15995/odip_config_integration.htm#CACCDHFE|http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b15995/odip_config_integration.htm#CACCDHFE] . Then, I can see, in the plug-in managment, four plug_in enabled
oidexplg_compare_ad_domain1
oidexplg_compare_ad_domain2
oidexplg_bind_ad_domain1
oidexplg_bind_ad_domain2
However, when I try to login on SSO (oiddas) I can login with a user from domain1 but not with a user from domain2. And, If I set disabled oidexplg_compare_ad_domain1 I can login to domain2 and not to domain1.
I can't do to work both authentication at the same time!!
Does anybody has this happened? some configuration o something?
Thanks in advance.
Sergio.

I solved this problem. You have to provision the differents MSAD domains to different OUs in OID.

Similar Messages

BlazeDS, multiple Module instances with Consumers issue

I have an application that can load multiple instances of a module. The module has a consumer that connects to a destination and listens for messages pushed from a JMS topic. In order for me to be able to load and unload multiple instances of the module I'm appending a uid to the url of the swf. When the first instance of the module is loaded everything works as expected and the consumer successfully subscribes to the destination. However, if a second instance of the module is loaded the consumer fails to subscribe and I see the following error in the server log:
[#|2010-10-28T15:05:33.666+0100|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|_ ThreadID=17;_ThreadName=httpSSLWorkerThread-8080-1;|
[BlazeDS]10/28/2010 [INFO] [Endpoint.General] Channel endpoint channel-streaming-amf received request.|#]
[#|2010-10-28T15:05:33.671+0100|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|_ ThreadID=17;_ThreadName=httpSSLWorkerThread-8080-1-in-streaming-mode;|
[BlazeDS]10/28/2010 [WARN] [Endpoint.StreamingAMF] Endpoint with id 'channel-streaming-amf' received a duplicate streaming connection request from, FlexClient with id '4CA3967A-071C-AB24-D5B9-CAB9D20F14B5'. Faulting request.|#]
[#|2010-10-28T15:05:33.671+0100|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|_ ThreadID=17;_ThreadName=httpSSLWorkerThread-8080-1;|
[BlazeDS]10/28/2010 [INFO] [Endpoint.FlexSession] Number of streaming clients for FlexSession with id '3275dcec0f5dc0c30a7381fa6044' is 0.|#]
[#|2010-10-28T15:05:33.672+0100|INFO|sun-appserver2.1|javax.enterprise.system.stream.out|_ ThreadID=17;_ThreadName=httpSSLWorkerThread-8080-1;|
[BlazeDS]10/28/2010 [DEBUG] [Endpoint.StreamingAMF] Number of streaming clients for endpoint with id 'channel-streaming-amf' is 0.|#]
[#|2010-10-28T15:05:33.673+0100|SEVERE|sun-appserver2.1|javax.enterprise.system.container. web|_ThreadID=17;_ThreadName=httpSSLWorkerThread-8080-1;_RequestID=96f36b13-0da4-49ad-b788 -bc6d1413da3b;|StandardWrapperValve[MessageBrokerServlet]: PWC1406: Servlet.service() for servlet MessageBrokerServlet threw exception
java.lang.IllegalStateException
at org.apache.coyote.tomcat5.CoyoteResponseFacade.sendError(CoyoteResponseFacade.java:449)
at flex.messaging.endpoints.BaseStreamingHTTPEndpoint.handleFlexClientStreamingOpenRequest(B aseStreamingHTTPEndpoint.java:732)
at flex.messaging.endpoints.BaseStreamingHTTPEndpoint.serviceStreamingRequest(BaseStreamingH TTPEndpoint.java:1022)
at flex.messaging.endpoints.BaseStreamingHTTPEndpoint.service(BaseStreamingHTTPEndpoint.java :430)
at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:322)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.jav a:427)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:333)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:214)
at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncoding Filter.java:88)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76 )
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:246)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:214)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:313)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:28 7)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPi peline.java:98)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProces sorTask.java:666)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorT ask.java:597)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTas k.java:872)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultRead Task.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106 )
|#]
Can anyone explain to me what is happening here and suggest a solution please? I'm not sure if it's a BlazeDS issue or a Flex Module issue but I can't seem to find any references to this issue and the last 2 days have been spent trying to resolve this without any success.
Any help appreciated.
If I don't append the uid to the module url then the consumers subscribe as expected but then I'm unable to unload individual instances of the module as they all share the same url property.
Thanks in advance.

I have similar problem, but I don't understand your solution.
Hypothetically, let’s say I use 2 separate sets of Consumer/Producer components in my flex app.
There is no problem with connecting first set of Consumer/Producer to a particular channel.
For second set of Consumer/Producer I create new ChannelSet and new StreamingAMFChannel instances (but the channel has the same URL as the one used in first set, because I want to use the same channel).
When I try to connect another set of Consumer/Producer to the same channel I get the error on BlazeDS: "... Endpoint with id 'streaming-amf' received a duplicate streaming connection request from, FlexClient with id ..."
There is no such problem when I define additional channel in BlazeDS configuration an use this new channel with second set of Consumer/Producer components. This solution requires this additional channel so it’s not fully satisfying for me.
Could you post some code samples of your solution or describe it in more detail?
I will be grateful for any useful tips.

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

HT4528 i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

No. But thank for asking.

Please help with Contribute issue- Adobe or anyone!

My issues are many- I don't know where to start. First, as a long-time Adobe customer, I can not believe how support has declined- I really miss my "support package" from the early 90's when I spoke with a person who really knew how to address my problems and/or questions. I am so tired of being outsourced to someone who has no idea how to address my problem- only to send me to "Document #8932023912 03" off of the Adobe website. I want to talk to someone who KNOWS and APPRECIATES this product, and who understands its internal behavior (like what I get when I call MAC SUPPORT). I will pay for it! I have invested thousands of dollars on Adobe software and am now at an unacceptable standstill.
My small business relies on the Adobe Creative Suite 4 and the Contribute program. Up until now, I have never had a complaint, especially after moving to Mac a few years ago. Troubles started after two things (still not sure what the culprit was) - installing Snow Leopard and installing a Wacom Bamboo tablet (on the same day- my bad). Well, Illustrator, Photoshop work just fine as well as my other non-Adobe programs. But I can't even open InDesign (will post this on the proper post) or Contribute. So Apple had me deduce that I needed to create a new User and try things there. I eventually migrated to this new user but still, I cannot use Contribute.
I have set permissions with the program and contents of the folder- in addition to my Contribute keys to no avail. I can't even open it. Nor can I open it in my Root user which at least lets me run In Design. I am at a total loss and I need to update a website for my client. PLEASE someone, I would so greatly appreciate any advice or instruction as to how to run Contribute on my new user. Or in my Root user. I just need to get it to open! Reinstall did nothing PLEASE HELP.
A special note to anyone from Adobe: I want to talk to someone via a support package-- NOT outsourced. Does this fee-based option exist? It doesn't seem to from the main support number. If someone can help direct me, I would appreciate the proper instruction to do so. I need to get my InDesign running again and I have already invested multiple hours, days with Adobe support with NO solution at all. This is unacceptable in my mind, especially for the moneys invested.
Thank you in advance... Aimee M.

I totally share your views on Adobe period. I loved Macromedia., they also answered all my questions, then Adobe had to buy them out! I called them today (sales Dept., that's where they answer rather quickly., of course), they explained the following: You can pay for a live person, but the prices differ in that they come in packages. In other words, you can pay a flat rate per hour for one-on-one OR pay for one-on-one tech support 5 times per month, and the amount of times per month vary from that point on., and so does the price! I'm baffled! They are HORRIBLE!! . Like yourself, am on a standstill ever since I've been stuck with not being able to publish my site with current edits and it gives me a message whereas my own company name is "currently editing the page," so it keeps kicking out. I've tried everything, including but not limited to the following: going to the library and checking out books to troubleshoot; going on Adobe pages for support as well the Help features on the software program., etc...I'm exhausted! ADOBE you guys need to reassess your Customer Care Support and your outsourcing business as well!!! YOU WILL LOOSE YOUR CUSTOMERS RATHER QUICKLY!!

A suggestion for those with battery issues:

When I first got my iPhone, I had the same battery issues many people here are talking about, in fact I posted about it myself. Its fixed. Very fixed, and Im very happy with my battery life. Here is what I did.
First, do not charge it using your USB connection. At least not always. Why? I dont know. I did the first few days, and couldnt get a full charge even tho system wasnt going to sleep. I started using the wall charger, and got longer battery life, but still not great. One night, I forwarded the phone to my home phone in case I got a call, and shut the phone down completely, and put it on charge. In the morning, I woke up to a 100% charged, fully glowing battery icon. The battery lasted all day with no issues. Every night after that, I just charged it on the wall charger, but did NOT shut it down to see what happened. I am still waking up every morning to a 100% fully charged battery. The battery life seems to get better daily now.
Today, I ran wifi for about 5 hours because I forgot to shut it off. This was after going to the pool and listening to the iPod on the phone for about 2 hours. And using the phone normally throughout the day, checking mail, sms, etc. Really a full day of work, and my battery is still over 50% full. I purposely didnt connect it to anything during the day for a recharge, not the USB or wall charger.
Good luck, hope this helps. Id be interested to know if it does.

Here's my non-scientific experiment.
After surprising battery drain for the first 10 days or so with not much usage, I completely drained the battery yesterday until the phone shut off.
I plugged into AC charge and was worried when it didn't seem to even begin charging.
I plugged into USB, assuming it needed to charge enough to at least complete a sync.
I left it on USB until about 5-10% charge, then switched it to AC. At about 50% I needed to use it, so I did but sparingly, and put it back on charge, all the while keeping Mail on manual and WiFi off.
I took it off once more to get it home from the office, then plugged into AC.
I left that charging overnight.
I never actually got the "glow", but did get the plug icon showing full charge in the status bar.
After about 2 1/2 hours this morning, the status has not moved off of 100% (but with little usage as before).
This is definitely an improvement already though. Hope this helps.

I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
I am using 2Wire Gateway modem/router from AT&T on b/g network.
I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
Please.. does anyone have a clue why this is happening?

You're definitely not the only one. I have the same issue. I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked. They finally sent me a replacement laptop. I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying. I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
My router is a Linksys E2000. I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

IPod touch connects to our wi-fi but cannot access the internet. It functions fine using other wi-fi at other locations just not ours at home. We have 2 other iPods in the house that use ours fine, with no issues....

I have done all the troubleshooting from the support page. The ipod shows that it is connected to our wi-fi and sometimes even shows the ip addresses but it wont let us connect to the internet/itunes store etc... the other ipods in the house use the wi-fi with no issues and this ipod is able to connect to public wi-fi and other location wi-fis and access the internet with no problems. What else do I do?

luvlabs
Thank you for your reply. I have tried your suggestion. Emmm I have an AirLive router, there are so many wires o.O I don't know which one to plug out. I think it is the yellow one which says WAN? But I wasn't so sure. So I tried plugging out each wire and followed your instructions. Sorry, but it didn't work I'm going mad xD! I even tried re-doing your instructions on WAN wire, and it didn't work.
Hmm according to step 4 (Log back into your network using Settings > WiFi > Other. Re-enter your network name (SSID), security, and network password.)
My network name is already available in the list. So I didn't need to do that. Or is it neccesary?
Thanks a bunch! Reply soon
Message was edited by: carmenc23

Read MULTIPLE idocs data with all sgmn to my internal table in a single

Dear SAP Folks!
I have a question, I know to read SINGLE idoc data with all segments, we have FM IDOC_READ_COMPLETELY but my requirement is to Read MULTIPLE idocs data with all segments to my internal table in a single shot without keeping this FM in loop! since it is performance issue, at a time i may want to read 1000 idocs data!
Could anyone please let me know is there any way to get this, keeping mind of performance and any other FM?
Best Regards,
Srini

Hi,
I know idoc numbers and i can write a select Query to DB table EDID4 to get all segments data to my internal table. But i am looking for FM to do this. because i have too many number of idocs and each idoc is having many segments(I am thinking in performance point of view!) The FM IDOC_READ_COMPLETELY can accept only ONE IDOC number as import parameters at a time to get segment data. in similar way do we have any other FM? or other way? except select query to EDID4 table?
Best Regards,
Srini

Executing multiple DDL statements with OracleCommand

hi..
im having trouble executing multiple ddl statements with the the oracle command object. i have tried to enclose them within Begin.. End; block but with no use.
this problem seems to occur only with DDL statements,.. as my DML like update, delete and Inserts seem to work fine when enclosed within the PL /SQL block.
single DDL statements also seem to work fine. so im guessing this has nothing to do with priviledges. any ideas?
my code as follows
OracleCommand command = new OracleCommand();
command.CommandType = CommandType.Text;
command.CommandText = string.Format(@"{0}",script);
conn.Open();
command.Connection = conn;
command.ExecuteNonQuery();
the script is read from a file, and looks like this. (note : i have removed any line breaks or any other characters)
BEGIN ALTER TABLE SYSTEMUSER DISABLE CONSTRAINT FK_USER_CLIENT; ALTER TRIGGER SET_SUBSCRIPTION_SUB_I DISABLE; END;
this is the error i get.
Oracle.DataAccess.Client.OracleException: ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "ALTER" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe.

If I'm not mistaken, we're not allowed to issue DDL inside anonymoue block (or stored procedure) since DDL has implicit commit in it. But you still can execute DDL using EXECUTE IMMEDIATE or using DBMS_SQL package. Try changing your CommandText like this,
BEGIN
EXECUTE IMMEDIATE 'ALTER TABLE SYSTEMUSER DISABLE CONSTRAINT FK_USER_CLIENT';
EXECUTE IMMEDIATE 'ALTER TRIGGER SET_SUBSCRIPTION_SUB_I DISABLE';
END;Hope this helps,
[Nur Hidayat|http://nur-hidayat.net/]

Multiple image upload with save to database problem

I am developing some backend work for a client, and we recently used the Multiple image upload with save to database wizard without a problem. A few days later, we noticed that we could only upload a single file at a time - it seems that the coding is no longer able to access the flash part of this and is using the javasript function instead. I know the web hosting company has made some changes on the server, and I did some reearch and it seems that there could be an issue with Flash 10, but has anyone else experienced anything like this? Any help is greatly appreciated.
Thanks.
Jeremy

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

IOS 8 creating multiple group messages with same recipients

After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads. It is terrible confusing and annoying. It has done this with several of my group messages. Deleting the duplicate threads have not worked. They keep recreating themselves when certain people text the group.
Any suggestions? This has been a problem for many of my friends as well.

Hi hkapn,
Do you and your wife use the same Apple ID and are connected to the same wifi network? Your phone ringing to multiple devices is called Continuity and is a feature of iOS8. https://www.apple.com/ios/whats-new/continuity/
Essentially, it allows you to use your iPhone cellular connection on all of your iOS8 devices: iPhone, iPad, Mac computers with Yosemite. On some devices the call will look like it is coming through FaceTime, but likely on your wife's iPhone it just looked like a regular call.
Since your iPhone was "hosting" the phone call through it's own cellular connection, you were able to pick it up after your wife answered, which caused your wife's phone to disconnect. This is called Handoff and is also a feature of iOS8.
You can turn off Continuity if you'd like, but you could also look into getting your wife her own Apple ID. I'm guessing you were sharing one so that you didn't have to make purchases twice. Also in iOS8, there is a feature called Family Sharing which allows you to link multiple Apple IDs and share purchases (among other things).
In regards to the group text message issue, as far as I can tell, splitting group messages is NOT a feature. I agree that there should be an answer to this already!

Multiple Image Upload with Save to DB - any help would be appreciated

Hi - I'm running into the following issue when using the Multiple Image Upload with Save to DB behaviour.
When I click the link to upload multiple files, I am given the list of local files to choose to upload. No problem here - I can select multiple files.
When i select choose, the uploader shows the progress but hangs at 0%
However (if I cancel the uploads), the first image of the group is uploaded and it's corresponding database entry is entered correctly.
Anyone else have this hangup? If so how did you get around it?
Thanks!
Dan

Just thought I would update.
The problem seems to be related to redirecting.
I had specified a redirect page, which of course stops the flash file from continuing to upload images after the first one.
Anyone know how to change this so when the flash uploader finished it goes back to a list page?
Thanks again.

Multiple wireless routers with Macintosh OSX - Does not work

I work for Spokane Public Library system as an IT Specialist. At all of our branches, we use multiple WRT54G wireless devices to serve our patrons. We are having notable trouble with Macintosh clients who can get connected to the wireless network but cannot obtain a DHCP address and thus cannot surf the web. We have the WRT54G devices configured with unique SSID's and no wireless protection; basically an open network.
Will having both of the WRT54G's set to the same channel pose a problem? Do Macs on OSX have an issue with the Linksys implementation of DHCP that you know of?
We have verified this problem at all branches; including the use of my laptop which is a MacBook Pro running OSX 10.4.10.
There are other posts on this forum with similar issues and no responses.
Any help would be appreciated. Thanks!

YES! My own resolution... It turns out that it WAS A LINKSYS COMPATIBILITY ISSUE. Updating the WRT54G firmware to version 1.02.2 made it all work great. There was a fix for DHCP in the 1.02.2 version.
This is for both version 5 and 6 of the WRT54G.
Woot!

Multiple Image Upload with save to database not working in IE anymore

Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.

I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
>

OID multiple plug in with AD issue

Similar Messages

Maybe you are looking for