IPod touch connects to our wi-fi but cannot access the internet. It functions fine using other wi-fi at other locations just not ours at home. We have 2 other iPods in the house that use ours fine, with no issues....

I have done all the troubleshooting from the support page. The ipod shows that it is connected to our wi-fi and sometimes even shows the ip addresses but it wont let us connect to the internet/itunes store etc... the other ipods in the house use the wi-fi with no issues and this ipod is able to connect to public wi-fi and other location wi-fis and access the internet with no problems. What else do I do?

luvlabs
Thank you for your reply. I have tried your suggestion. Emmm I have an AirLive router, there are so many wires o.O I don't know which one to plug out. I think it is the yellow one which says WAN? But I wasn't so sure. So I tried plugging out each wire and followed your instructions. Sorry, but it didn't work I'm going mad xD! I even tried re-doing your instructions on WAN wire, and it didn't work.
Hmm according to step 4 (Log back into your network using Settings > WiFi > Other. Re-enter your network name (SSID), security, and network password.)
My network name is already available in the list. So I didn't need to do that. Or is it neccesary?
Thanks a bunch! Reply soon
Message was edited by: carmenc23

Similar Messages

IPod Touch 2nd Gen can stream Youtube but cannot stream Apps that supports Online Streaming , it just kicks itself out of the app

iPod Touch 2nd Gen can stream Youtube but cannot stream Apps that supports Online Video Streaming , it just kicks itself out of the app.
It used to be able to stream apps that supports Online Video Streaming , tried Restore a couple of times and it didn't help .
What could the issue be ?

The ESPN Radio is basically a Paid radio station.Make sure you have enuff balance to stream a radio from your Iphone. .
Check if you required to open any ports on your router for ESPN Radio.

I am connected to my wireless network but cannot access the internet. Any ideas?

I am connected to my wireless network but cannot access the internet. Any ideas?

Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

IPhone connected to Apple Wireless Extreme but cannot access Internet

I have the Apple Wireless Extreme that I use to connect my MacBook Pro online, and for some reason the iPhone cannot access the Internet. I can connect to the base station, but can't go online - it's getting an IP address and I can see the DNS server addresses. I have tried no security, WEP, WPA and WPA 2 with no luck. I have to resort to connecting to someone elses wireless network so I can go online with the iPhone.
Any ideas?

I have an Airport Extreme base station using WPA2 Personal encryption for my wireless network without MAC filtering, and I connect with my network with no problems.
How many characters is your password when using WPA2 Personal encryption?
I would also try resetting your wireless network.
Power your MB and your iPhone off.
Power your Airport Extreme Base Station off, and then your modem.
Wait several minutes and then reverse the process.
Power your modem on allowing it to completely reset and connect.
Power your Airport Extreme Base Station on, allowing it to reset with the modem.
Power your iPhone on and try connecting to your wireless network.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back-up app.

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
Have used Superduper app. to back up and checked back-up occasionally to see if all files present and appeared OK.
I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
Running iMAC System 10.4.11
How can I successfully download from the Maxtor back-up?
Ivan

Further info.
I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
Solved the Stickies problem by using Spotlight to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
Re Ical data loss. Used Spotlight to find iCal document in Library - Preferences where I found com.apple.iCal.plist in folder.
Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
So now I cannot tell which is the symbol iCal.plist
Thanks for leading me so far, but how do I find that plist for my calendar?

My 8GB iPod touch is running out of space, but all I have is 177 songs with no apps, videos, or pictures.

My 8GB iPod touch is running out of space, but all I have is 177 songs with no apps, videos, or pictures.

Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
An "other" larger than abount 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

The Tango app might be of some help with that:
http://www.tuaw.com/2010/11/08/tango-links-your-ios-devices-for-remote-music-con trol/

I have an ipod touch 4g and itunes 10.5 but everytime i try updating my itouch to ios5 it comes up with error 3194

I have an ipod touch 4g and itunes 10.5 but everytime i try updating my itouch to ios5 it comes up with error 3194
please help thank you

What was the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT1937 i have old email address that is being used on my apple id and i do not know password I also have another apple id created but when I go to the istore it shows my pld account and i cannot delete and setup the right one

i have old email address that is being used on my apple id and i do not know password I also have another apple id created but when I go to the istore it shows my pld account and i cannot delete and setup the right one

No, "My Number" was not listed in my Phone menu, I had to manually type it it. Is there a way for that number to automatically be listed in that "My Number" spot? Would that maybe have something to do with my phone number not being listed as an option in the "Send and Receive" spot under messaging???

HT201263 My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Lee3 May 25, 2012 5:36 AM I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%! Is there someone that can assist me with this issue? : /

Lee3
May 25, 2012 5:36 AM
I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!
Is there someone that can assist me with this issue?
:>/

How long did you wait for the download to run? The last time I downloaded the Windows support files for Boot Camp, it was going very slowly, so I swapped away to another task. Several minutes later I came back and it had moved a little, but not much, so I went on with other things. When I got back to it several hours later, the download had completed. Perhaps you just need to let it go overnight to perform the downloads...

I have multiple iphones at my business that we take photos with and upload to one icloud account. Is there anyway to tell the difference between the phones? I tried the info tab but they are all iphone 4's?

I have multiple iphones at my business that we take photos with they are all uploaded to the same icloud account. Is there anyway to tell which phone the photo came from? The info tab doesn't help because they are all iphone 4's.

NNot with the regular MY Photo Stream. You could use individual Shared Photo Streams instead for each iPhone, if the iOS versions support shared streams. upload to a shared stream is not automatic however. You will have to share them manually.

I have my IPod Touch connected via USB but it says it's not connected to my computer

I have my IPod Touch connected VIA USB port but a message tells me it's not connected to my computer so I can't get mail, etc. What do I have to do to remedy this?
Thank you.
Rjhs

What is the exact wording of the error message?
What are you trying to do?
The USB connection provides not internet connectivity. The iPod can only connect to the internet via wifi

Hi all i won't update my iPod touch 4 generation to ios 5 but there are win the download end its showing a massage (the network connection timed out)

Hi all i won't update my iPod touch 4 generation to ios 5 but there are win the download end its showing a massage (the network connection timed out)

Okay. I've tried syncing it first, resetting it first, downloading the firmware, uninstalling and reinstalling iTunes, I've checked my connections and ports and everything, run all kinds of diagnostics, and nothing is working. Every time it says it's backing it up, my iPod resets and then it's back to square one. I'm going to restore it and see if that helps. What a pain in the butt, especially since it wouldn't back it up.... >.<

IPod touch connects to our wi-fi but cannot access the internet. It functions fine using other wi-fi at other locations just not ours at home. We have 2 other iPods in the house that use ours fine, with no issues....

Similar Messages

Maybe you are looking for