OIM 10.1.4.3 patcher error connecting to 11gr2 DB

I am trying to install FRP 11g and am almost to the actual FRP install....
I have the latest version of 11g database as my repository DB. I installed OIM 10.1.4.0.1 for the SSO and DAS into the 11g IM repo successfully.
However when trying to run the patch 10.1.4.3 I get to the "Enter Metadata Repository SYS Password" screen and enter credentials and click next it says.
"OUI has detected that your database is version 11.2.0.1.0. Before you can continue, you must apply a required Database patch set. Refer to My Oracle Support for the latest OracleAS Metadata Repository certification information."
Found a doc in oracle support that says...
- -Below are the high level steps for new Identity Management 10g installations where a separately managed database home is desired, and ultimately to be the 11.2 version:
a) Install a separate 10.2 Database Server
b) Run MRCA 10.1.4.0.1
c) Install Identity Management 10g 10.1.4.0.1
d) Apply 10.1.4.3 or newer Patchset
e) Upgrade 10.2 to 11.2.0.1 following the Oracle Database Upgrade Guide
Are you trying to tell me I've come all this way and IM 10.1.4.0.1 is fine with the 11gR2 database repo, but the patch 10.1.4.3 wont work with 11gR2 DB repo?
Please advise.

There are multiple locations where DBConnectQueries.jar and IP_DBQueries.jar exist. The problem is actually that the installer may use different locations depending on different factors.
These two bugs have been filed:
Bug 9441716 UNABLE TO APPLY 10.1.4.3.0 (P7215628) ON 11.2 DB DESPITE APPLYING PATCH 6265268
Bug 9441989 CANNOT APPLY 10.1.4.3.0 (P7215628) ON 11.2 DB DESPITE APPLYING PATCH 6265268
As a result, the readme was updated and it was confirmed working as the readme states.
---quote---
To use this patch, the CD must be copied to a writable location. After copying the CD, do a one-for-one replacement with the files listed below replaced by the ones included in the patch:
For IAS 10.1.4.3 :
DBConnectQueries.jar
Disk1/stage/Queries/DBConnectQueries/8.4/1/DBConnectQueries.jar
IP_DBQueries.jar
Disk1/stage/Queries/IP_DBQueries/3.0/1/IP_DBQueries.jar
cp DBConnectQueries.jar $10.1.4.3_SSO_OH/inventory/Queries21/DBConnectQueries/8.4
cp IP_DBQueries.jar $10.1.4.3_SSO_OH/inventory/Queries21/IP_DBQueries/3.0
run 10143 patch installer
---end quote---
The older readme said what the 10.1.3.1 version of the patch said. Be sure you select the 10.1.4.3 version. Note the above "SSO_OH" means the SSO home. Theres actually two sets of steps above. The first two are for Disk1 and the second two are for the SSO home. Its not exactly obvious though.
However, there seems to be another condition because issues have been reported like this one with it still not working. The workaround is to copy DBConnectQueries.jar and IP_DBQueries.jar from the patch to ALL locations where they exist on both Disk1 and the SSO home. Note its not always \8.5 and \3.0 (note the readme says \8.4 and CBass said \8.5).
If you have access to My Oracle Support, see the following:
How to Install SSO with Oracle Fusion Middleware 11g (Doc ID 1069426.1)
Its a tricky installation because the OS and DB versions used were certified post release, and theres different steps for the pure IM 10g use case verses the FMW 11g use case and the multiple issues which arise which only have workarounds.
...Ken

Similar Messages

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

OIM 9.1.0.2 upgrade - error

Hello Experts,
Currently I am using OIM 9.1.0.1 (Version: 9.1.0.1860.16 Build 1860.16 ) and trying to upgrade it to 9.1.0.2. Downloaded the 9.1.0.2 base (p8484010_9102_Generic.zip) from metalink.
1. Taken the necessary backup.
2. Upgrading Oracle Identity Manager Database on Oracle Database --- here it fails
When I issue the below command it fails with error message
PATCH/db/oracle/Scripts/oim_db_upg_910_to_9102.cmd OIMDB D:\oracle\ora92 xelsysadm xelsyspassword D:\PATCH
Error:
Log file "oim_db_upg_9101_to_9102.log" contains the below errors
-- START : upg_9102.sql
ERROR at line 79:
ORA-06550: line 79, column 2:
PLS-00103: Encountered the symbol "/"
Elapsed: 00:00:00.00
DECLARE
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at line 9
Elapsed: 00:00:00.01
SELECT count() into row_cnt FROM SIL_TYPE_CATEGORY where SIL_TYPE_CATEGORY_NAME= 'System_Type';*
Can u assist me?
Thanks & Regards
INIYA

It contains almost 2500 lines... and exceeds the maximum length...
I just pasted around 300 lines...
-- upg_910x.sql
-- Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
-- NAME
-- upg_910x.sql - <one-line expansion of the name>
-- DESCRIPTION
-- <short description of component this file declares/defines>
-- NOTES
-- <other useful comments, qualifications, etc.>
-- MODIFIED (MM/DD/YY)
-- apitre 04/28/09 - Remove 9102_dml_insert_pty_HideObjectForm.sql from
-- upg_9102.sql
-- neegoel 02/02/09 - Created
/*==============================================================*/
/* File Name: 9102_ddl_SoDInvocationDBScript.sql */
/* Database name: SoD Invocation Framework Database(Modified) */
/* DBMS name: ORACLE           */
/* Created by:     Shikha */
/*==============================================================*/
--BLOCK 1 : This block creates all sequences for SoD Invocation Framework database
DECLARE
cnt int;
BEGIN
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SCO_STY_JOIN_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SCO_STY_JOIN_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SCO_STY_JOIN_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SYSTEM_TYPE_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SYSTEM_TYPE_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SYSTEM_TYPE_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SERVICE_COMP_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SERVICE_COMP_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SERVICE_COMP_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SYSTEM_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SYSTEM_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SYSTEM_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_TYPES_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_TYPES_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_TYPES_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_TYPE_CATEGORY_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_TYPE_CATEGORY_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_TYPE_CATEGORY_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_ASYNCH_INFO_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_ASYNCH_INFO_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_ASYNCH_INFO_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_PARAMETERS_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_PARAMETERS_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_PARAMETERS_SEQ Already exists');
End IF;
END;
--BLOCK 2: This block creates all tables/indexes, and apply constraints for SoD Invocation Framework database
DECLARE
cnt int;
BEGIN
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SCO_STY_JOIN';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SCO_STY_JOIN (
SIL_SERVICE_COMP_KEY NUMBER(19) Not null,
SIL_SYSTEM_TYPE_KEY NUMBER(19) Not null,
SIL_SCO_STY_JOIN_DATA_LEVEL NUMBER(1),
SIL_SCO_STY_JOIN_CREATE DATE,
SIL_SCO_STY_JOIN_CREATEBY NUMBER(19),
SIL_SCO_STY_JOIN_UPDATE DATE,
SIL_SCO_STY_JOIN_UPDATEBY NUMBER(19),
SIL_SCO_STY_JOIN_NOTE CLOB,
SIL_SCO_STY_JOIN_ROWVER RAW(8),
constraint PK_SIL_SCO_STY_JOIN primary key (SIL_SERVICE_COMP_KEY, SIL_SYSTEM_TYPE_KEY)
dbms_output.put_line ('Table SIL_SCO_STY_JOIN created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SCO_STY_JOIN exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SYSTEM_TYPE';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SYSTEM_TYPE (
SIL_SYSTEM_TYPE_KEY NUMBER(19) not null,
SIL_TYPES_KEY NUMBER(19) not null,
SIL_SYSTEM_TYPE_INFO_XML CLOB,
SIL_SYSTEM_TYPE_NAME VARCHAR2(255),
SIL_SYSTEM_TYPE_DATA_LEVEL NUMBER(1),
SIL_SYSTEM_TYPE_CREATE DATE,
SIL_SYSTEM_TYPE_CREATEBY NUMBER(19),
SIL_SYSTEM_TYPE_UPDATE DATE,
SIL_SYSTEM_TYPE_UPDATEBY NUMBER(19),
SIL_SYSTEM_TYPE_NOTE CLOB,
SIL_SYSTEM_TYPE_ROWVER RAW(8),
constraint PK_SIL_SYSTEM_TYPE primary key (SIL_SYSTEM_TYPE_KEY)
dbms_output.put_line ('Table SIL_SYSTEM_TYPE created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SYSTEM_TYPE exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SERVICE_COMP';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SERVICE_COMP (
SIL_SERVICE_COMP_KEY NUMBER(19) not null,
SIL_TYPES_KEY NUMBER(19) not null,
SIL_SERVICE_COMP_SERVICE_NAME VARCHAR2(255),
SIL_SERVICE_COMP_INFO_XML CLOB,
SIL_SERVICE_COMP_CLASS VARCHAR2(255),
SIL_SERVICE_COMP_DATA_LEVEL NUMBER(1),
SIL_SERVICE_COMP_CREATE DATE,
SIL_SERVICE_COMP_CREATEBY NUMBER(19),
SIL_SERVICE_COMP_UPDATE DATE,
SIL_SERVICE_COMP_UPDATEBY NUMBER(19),
SIL_SERVICE_COMP_NOTE CLOB,
SIL_SERVICE_COMP_ROWVER RAW(8),
constraint PK_SIL_SERVICE_COMP_KEY primary key (SIL_SERVICE_COMP_KEY)
dbms_output.put_line ('Table SIL_SERVICE_COMP created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SERVICE_COMP exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SYSTEM';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SYSTEM (
SIL_SYSTEM_KEY NUMBER(19) not null,
SIL_SYSTEM_TYPE_KEY NUMBER(19) not null,
SIL_SYSTEM_NAME VARCHAR2(255),
SIL_SYSTEM_DATA_LEVEL NUMBER(1),
SIL_SYSTEM_CREATE DATE,
SIL_SYSTEM_CREATEBY NUMBER(19),
SIL_SYSTEM_UPDATE DATE,
SIL_SYSTEM_UPDATEBY NUMBER(19),
SIL_SYSTEM_NOTE CLOB,
SIL_SYSTEM_ROWVER RAW(8),
constraint PK_SIL_SYSTEM primary key (SIL_SYSTEM_KEY)
dbms_output.put_line ('Table SIL_SYSTEM created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SYSTEM exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_TYPES';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_TYPES (
SIL_TYPES_KEY NUMBER(19) not null,
SIL_TYPE_CATEGORY_KEY NUMBER(19) not null,
SIL_TYPES_NAME VARCHAR2(255),
SIL_TYPES_DATA_LEVEL NUMBER(1),
SIL_TYPES_CREATE DATE,
SIL_TYPES_CREATEBY NUMBER(19),
SIL_TYPES_UPDATE DATE,
SIL_TYPES_UPDATEBY NUMBER(19),
SIL_TYPES_NOTE CLOB,
SIL_TYPES_ROWVER RAW(8),
constraint PK_SIL_TYPES primary key (SIL_TYPES_KEY)
dbms_output.put_line ('Table SIL_TYPES created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_TYPES exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_TYPE_CATEGORY';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_TYPE_CATEGORY (
SIL_TYPE_CATEGORY_KEY NUMBER(19) not null,
SIL_TYPE_CATEGORY_NAME VARCHAR2(255),
SIL_TYPE_CATEGORY_DATA_LEVEL NUMBER(1),
SIL_TYPE_CATEGORY_CREATE DATE,
SIL_TYPE_CATEGORY_CREATEBY NUMBER(19),
SIL_TYPE_CATEGORY_UPDATE DATE,
SIL_TYPE_CATEGORY_UPDATEBY NUMBER(19),
SIL_TYPE_CATEGORY_NOTE CLOB,
SIL_TYPE_CATEGORY_ROWVER RAW(8),
constraint PK_SIL_TYPE_CATEGORY primary key (SIL_TYPE_CATEGORY_KEY)
dbms_output.put_line ('Table SIL_TYPE_CATEGORY created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_TYPE_CATEGORY exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_ASYNCH_INFO';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_ASYNCH_INFO (
SIL_ASYNCH_INFO_KEY NUMBER(19) not null,
SIL_SYSTEM_KEY NUMBER(19) not null,
SIL_ASYNCH_INFO_IDM_OPER_ID NUMBER(19),
SIL_ASYNCH_INFO_SOD_ANL_ID NUMBER(19),
SIL_ASYNCH_INFO_ANL_TYPE VARCHAR2(255),
SIL_ASYNCH_INFO_ANL_RESULT VARCHAR2(255),
SIL_ASYNCH_INFO_CURRENT_STA VARCHAR2(255),
SIL_ASYNCH_INFO_DATA_LEVEL NUMBER(1),
SIL_ASYNCH_INFO_CREATE DATE,
SIL_ASYNCH_INFO_CREATEBY NUMBER(19),
SIL_ASYNCH_INFO_UPDATE DATE,
SIL_ASYNCH_INFO_UPDATEBY NUMBER(19),
SIL_ASYNCH_INFO_NOTE CLOB,
SIL_ASYNCH_INFO_ROWVER RAW(8),
constraint PK_SIL_ASYNCH_INFO primary key (SIL_ASYNCH_INFO_KEY)
dbms_output.put_line ('Table SIL_ASYNCH_INFO created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_ASYNCH_INFO exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_PARAMETERS';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_PARAMETERS (
SIL_PARAMETERS_KEY NUMBER(19) not null,
SIL_SYSTEM_KEY NUMBER(19) not null,
SIL_PARAMETERS_NAME VARCHAR2(255),
SIL_PARAMETERS_VALUE VARCHAR2(255),
SIL_PARAMETERS_DATA_LEVEL NUMBER(1),
SIL_PARAMETERS_CREATE DATE,
SIL_PARAMETERS_CREATEBY NUMBER(19),
SIL_PARAMETERS_UPDATE DATE,
SIL_PARAMETERS_UPDATEBY NUMBER(19),
SIL_PARAMETERS_NOTE CLOB,
SIL_PARAMETERS_ROWVER RAW(8),
constraint PK_SIL_PARAMETERS primary key (SIL_PARAMETERS_KEY)
dbms_output.put_line ('Table SIL_PARAMETERS created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_PARAMETERS exists');
End IF;
END;
DECLARE
cnt int;
BEGIN
SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SCO_STY_JOIN_FK1';
IF Cnt = 0 Then
     EXECUTE IMMEDIATE 'alter table SIL_SCO_STY_JOIN add CONSTRAINT SIL_SCO_STY_JOIN_FK1 FOREIGN KEY (SIL_SYSTEM_TYPE_KEY) REFERENCES SIL_SYSTEM_TYPE (SIL_SYSTEM_TYPE_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SCO_STY_JOIN_FK2';
IF Cnt = 0 Then
     EXECUTE IMMEDIATE 'alter table SIL_SCO_STY_JOIN add CONSTRAINT SIL_SCO_STY_JOIN_FK2 FOREIGN KEY (SIL_SERVICE_COMP_KEY) REFERENCES SIL_SERVICE_COMP (SIL_SERVICE_COMP_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SYSTEM_TYPE_FK1';
IF Cnt = 0 Then
EXECUTE IMMEDIATE 'alter table SIL_SYSTEM_TYPE add CONSTRAINT SIL_SYSTEM_TYPE_FK1 FOREIGN KEY (SIL_TYPES_KEY) REFERENCES SIL_TYPES(SIL_TYPES_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SERVICE_COMP_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_SERVICE_COMP add CONSTRAINT SIL_SERVICE_COMP_FK1 FOREIGN KEY (SIL_TYPES_KEY) REFERENCES SIL_TYPES(SIL_TYPES_KEY)';
END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SYSTEM_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_SYSTEM add CONSTRAINT SIL_SYSTEM_FK1 FOREIGN KEY (SIL_SYSTEM_TYPE_KEY) REFERENCES SIL_SYSTEM_TYPE(SIL_SYSTEM_TYPE_KEY)';
END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_TYPES_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_TYPES add CONSTRAINT SIL_TYPES_FK1 FOREIGN KEY (SIL_TYPE_CATEGORY_KEY) REFERENCES SIL_TYPE_CATEGORY(SIL_TYPE_CATEGORY_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_ASYNCH_INFO_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_ASYNCH_INFO add CONSTRAINT SIL_ASYNCH_INFO_FK1 FOREIGN KEY (SIL_SYSTEM_KEY) REFERENCES SIL_SYSTEM(SIL_SYSTEM_KEY)';
END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_PARAMETERS_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_PARAMETERS add CONSTRAINT SIL_PARAMETERS_FK1 FOREIGN KEY (SIL_SYSTEM_KEY) REFERENCES SIL_SYSTEM(SIL_SYSTEM_KEY)';
     END IF;
END;
/

HTTP response error :Connection reset

Hi all,
I am getting following error in log while sending message to the trading partner and the main problem is that once this error comes then after that I am not able to send any more message to any of my Trading Partners. Even if I try to send message to any other Trading Partner, nothing comes in the B2B log and report as well. After restarting the B2B I am able to send message again to other Trading Partners.
Can anyone please tell the reason for getting this error? I also want to know that after getting this error once, why am I not able to send message to any Trading Partner?
2008.12.12 at 06:41:07:647: Thread-13: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:980)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1744)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
... 8 more
2008.12.12 at 06:41:07:647: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2008.12.12 at 06:41:07:648: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset
2008.12.12 at 06:41:07:651: Thread-13: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.12.12 at 06:41:07:652: Thread-13: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 06:41:07:658: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AF77A6111E29ED374E000001BDE3D60</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset</errorText>
<errorDescription>
<![CDATA[Machine Info: (dys094w004)
Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.12.12 at 06:41:07:692: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2008.12.12 at 06:41:07:693: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2008.12.12 at 06:41:07:696: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Please help.
Thanks & Regards,
Anuj Dwivedi

Hi Sinkar,
Thanks for the reply. I confirmed it with my Trading Partner and their server is not running but still I want to know that why am I not able to send message to any other Trading Partner after getting this error once. And if I restart the server, it again acts normally and I am able to send message to other Trading Partners.
SSL is configured properly because I was able to communicate with this Trading Partner earlier when their server was up.
We are working on 10.1.2.3.0 with 7457066 MLR 5 patch. Please guide if any other patch required.
Thanks for the help.
Warm Regards,
Anuj Dwivedi

Error connecting to planning server from EAS

We implemented Hyperion Planning about 1 month ago. We are having this intermittent issue with connecting to Planning servers. When the users attempt to add a Business Rule, they select an outline, and browse to the planning servers. When they click one of the two servers they get the message "Error connecting to Planning server <<Server A>>". The message only happens on Server A.
I check the planning service, it is running. I login directly to the planning application (http://<<Server A>>:8300/HyperionPlanning/) , it works fine. However I still get the error. The problem comes and goes, but once is happens the only solution seems to be restart all of the services on the Planning server.
Is anyone experiencing this issue?
If so is there a resolution? Is this a common thing with Hyperion Planning?
I opened a TAR, but because the issue is only happening occasionally (1 day in 5) I thought I would try the forums. Any help or suggestions would be appreciated.

Hi,
What version of planning are you running, there was patch 9.3.1.1.1 that addressed
6636367 (8-665086601) When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
This maybe the same sort of issue you are experiencing.
Cheers
John
http://john-goodwin.blogspot.com/

Error connecting to Client Sys. DB

Hi
i am trying to create Datasource in my my localhost for the
client's database.
i am able to connect to through the SQL Server Enterprise
Manager, but when i am creating datasource i am getting following
error:
Connection verification failed for data source: dev1
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver][Macromedia][SQLServer JDBC Driver]The requested instance is
either invalid or not running.
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver][Macromedia][SQLServer JDBC
Driver]The requested instance is either invalid or not
running.

This assumes you have CFMX 7.01 and SQL Server 2000 installed
on Windows 2000/XP/2003
This may help:
• Install SQL2000 SP3 ( or latest patch)
• Create an ODBC DSN within the Microsoft ODBC Manager
to make certain the connections are working at this level.
• Create a new SQL2000 user with administrative
permissions, go to the user/admin properties and allow permissions
at all levels for the applicable database (not all dbs).
• Create the JDBC DSN in Coldfusion, use the server
name that is listed in the Enterprise Manager.

Sapwebdispatcher: ERROR: Connection to message server failed

Hi Team,
We have been facing an issue on the webdispatcher. Web-disaptcher is notable to communicate with the Message Server[PRD-XI].
=====================
Environment: Set-up =
=====================
1. The Webdispatcher is in DMZ. We have opened the port 8100 at the firewall.
==========================================================================
ERROR MESSAGE
==========================================================================
[Thr 2058] Fri Jan 11 18:53:27 2008
[Thr 2058] *** ERROR => NiBufIConnect: non-buffered connect pending after
5000ms (hdl 4;10.1.10.56:8100) [nibuf.cpp 4611]
[Thr 2058] *** ERROR => Connection request from (-1/65535/0) to host:
10.1.10.56, service: 8100 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2738]
[Thr 2058] *** ERROR => IcmConnClientRqCreate() failed (rc=-8)
[icrxx_mt.c 5100]
[Thr 2058] *** ERROR => Could not connect to SAP Message Server at
10.1.10.56. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2459]
[Thr 2058] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2460][Thr 2058] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2461]
==========================================================================
SAPWEBDISPATCHER VERSION DETAILS:
==========================================================================
wd011:wpiadm 73> sapwebdisp -v
SAP Web Dispatcher Version 7.00.10, multithreaded, ASCII, 64 BIT
kernel information
system name =
kernel release = 700
database library =
compiled on = AIX 2 5 005DD9CD4C00
compile time = May 19 2007 01:59:47
update level = 0
patch number = 110
source id = 0.111
supported environment
operating system
AIX 1 5
AIX 2 5
AIX 3 5
=============================================================================
TEST OUTPUT
==========================================================================
wd011:wpiadm 71> sapwebdisp -bootstrap
SAP Web Dispatcher Bootstrap
============================
This bootstrap will perform the following steps:
1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not
already existing)
2. create user for web based administration in file "icmauth.txt"(if notalready exisiting)
3. start SAP Web Dispatcher with the created profile
After the bootstrap you can use the web based administration
Generating Profile "sapwebdisp.pfl"
Hostname of Message Server (rdisp/mshost): 10.1.10.56
HTTP Port of Message Server (ms/http_port): 8100
Checking connection to message server...
ERROR: Connection to message server failed: NIECONN_REFUSED
Do you want to continue with these settings? no
==========================================================================
BACK-END APPLICATION MESSAGE SERVER DETAILS: SID: PPI [PI/XI]
==========================================================================
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Thu Jan 3 15:31:05 2008
[Thr 1] WLM Tag 'PPI/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2519162
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2519162)
[msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/PPI/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.1.10.56] pi100 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [10.1.99.4] pi100v (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = pi100
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsPPI (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >R1306811094<
[Thr 1] Thu Jan 3 15:31:28 2008
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403
Forbidden)
======================+++++++++++++++++++++++++++==============================
Please find the attached file for a better understanding of the trace file.
A quick action on this would be much appreciated.
Please let me know for any information required.
Thank you.
Regards,
~sagar

Vipin,
I don't have access to our firewall myself to confirm what ports and services we opened (I worked with our Network Operations team to get this done), but if I recall correctly, it was pretty limited, just http and https over tcp ports 80, 443, 8100, and 8101. Probably could even restrict that to just https over 443 and 8101. However, from your configuration, you don't yet have your web dispatcher configured to talk to your message server over https, only http. I would recommend that you get the web dispatched completely configured and working in as close to your final desired configuration as possible while keeping it inside your firewall, not your dmz. Then move it to the dmz and see what breaks, and that way you know it's just the firewall that needs configuration at that point.
To configure the SSL termination, the following are the parameters required and the way that I configured them in our scenario (which terminates incoming SSL requests and re-encrypts them when sending them on to the backend, and also uses SSL for message server communication):
rdisp/mshost = mshost.domain.org
ms/https_port = 8101
wdisp/server_info_protocol = https
wdisp/group_info_protocol = https
wdisp/url_map_protocol = https
icm/server_port_1 = PROT=HTTPS,PORT=443,TIMEOUT=30,PROCTIMEOUT=600
icm/server_port_2 = PROT=HTTPS,PORT=8101,TIMEOUT=30,PROCTIMEOUT=600
icm/host_name_full = wdhost.domain.org (note, use the externally visible name as registered on your SSL certificate for web dispatcher here; does not need to match the actual machine hostname, but must be resolvable in external DNS)
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=\usr\sap\RW1\W00\data\icmanroot/admin,AUTHFILE=\usr\sap\RW1\SYS\global\security\data\icmauth.txt,PORT=8101
ssl/ssl_lib = $(DIR_EXECUTABLE)\sapcrypto.dll
ssl/server_pse = $(DIR_INSTANCE)\sec\SAPSSLS.pse
ssl/client_pse = $(DIR_INSTANCE)\sec\SAPSSLC.pse
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 1
is/HTTP/show_detailed_errors = FALSE
wdisp/permission_table = $(DIR_INSTANCE)\sec\ptab
On the backend host I have the following parameters:
sec/libsapsecu = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssfapi_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssl_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssf/name = SAPSECULIB
icm/server_port_2 = PROT=HTTPS,PORT=443,PROCTIMEOUT=-1
ms/server_port_1 = PROT=HTTPS,PORT=8101
Naturally, a server certificate is configured on the backend that the web dispatcher trusts (it can be an internally generated certificate; the outside public just needs to trust the web dispatcher's certificate, so that one should come from a recognized CA). Port 8101 is NOT open from the outside, just from the dmz and only to/from the web dispatcher host (this does allow me to use the webadmin interface from the inside). The https service also has to be activated on the backend in SMICM.
There's good advice about security setup for the web dispatcher in Note 870127, and troubleshooting advice in the Note mentioned in your tracefile output, 552286. Fairly complete documentation is in the online help at http://help.sap.com/saphelp_nw70/helpdata/en/de/89023c59698908e10000000a11402f/frameset.htm. Note 538405 is also good, more for performance configuration than security.
I hope you find this helpful.
--Matt

Fed up with Airport Extreme card errors connecting to wireless network

Since buying my black MacBook in June I have been 'enjoying' completely haphazard connection to my (encrypted) home wireless network, and been forced to sponge off some neighbour's open network half the time, as I keep getting the message 'there was an error connecting to the ... wirless network'.
I HAVE connected to my network successfully, and from time to time the ghost in my machine does let the MacBook connect to it all by itself, so there is no compatibility issue as such. I had hoped that downloading the most recent Airport Extreme Firmware Update would help, as it promised to 'improve reliability', but alas. I've tried downgrading to 10.4.9 as somebody suggested on these forums, but that didn't make any difference, so I'm now back on 10.4.10.
The whole thing is driving me completely bonkers, so if anyone has any suggestions (or would consider joining me for a complaint to the Advertising Standards Authority about Apple's misleading advertisements promising that 'it just works'...) I would be most grateful.

Don't order an ethernet cable from the Apple Store, any geek worth his salt might have one in his back pocket or a few in his bag (probably calls it a "patch cord".) Even Target sells them for $7-8 but anyone in IT buys them in bulk for $1-2 or makes their own for even less (materials cost, anyway, but they do take a bit of time and skill to put the ends on correctly).
As for the wireless, I moved from a Powerbook G4 to a MBP 17" to a new MBP 15," and I have been very disappointed in how less stable the MBP wireless connection is than my old PB G4 or even my wife's four year old iBook as she sits on the couch near me merrily surfing away while I grumble. However, I have a cheapy SMC wireless router - I don't have the problem at work where we have Airport base stations or at many other places with different brand routers - it's tough to nail down, and it's **** aggravating, especially when working on a deadline.

Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

CCM.LOG Showing Errors Connecting to Server (Error 5 - Access Denied) to \\\admin$ Share

Hi All!
We are encountering what I think would be a normal error in most cases if a client is unavailable or offline. During client push, we are receiving errors connecting to a NULL value in the log (\\\admin$) as opposed to an actual client:
Under normal circumstances, the log should read as follows:
Attempting to connect to administrative share
\\<machine_name>\admin$ using <Client Push Account>.
What we are running into is a repeating error (with some processed CCR records in between) that shows as follows:
~ Doing Account Cleanup Operation .... SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Processing domain DOMAIN1 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Processing domain DOMAIN2 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Processing domain DOMAIN3 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Account Cleanup Operation Completed successfully. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
We have Three Domains (Domain1, Domain2, and Domain3) with service accounts specified in the Client Push Installation Client properties.
I don't know if there is an entry (or entries) in the SCCM database that are NULL or blank that is generating these errors.
\\\admin$ indicates, to me, that there is a missing machine name that should follow the two \\ and before the \admin$. Obviously we aren't going to be able to connect to a machine with no name (hence the Failed to Connect to Server. Error
5).
Is there a way to clean the database of these empty records and fix this recurring error? It repeats every 15 minutes.
Thank you!

Yes, I know this is an old post, but I’m trying to clean them up.
I would review the CM07 console to see if there are any device without a netbios name. It will be these device that are cause you problems.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

OEDQ 11 - error.connection.externaldatasource - While trying to export excel file into local drive

Team I am trying to export a dataset as a excel spreadsheet on to my local drive. when I ever I try to run the Export I am getting error.connection.externaldatasource error message.
Even I tried creating a excel file in my local and point that file in EDQ - Data Stores connection , still getting the same error message.
Please help.
Thanks!
BG

Also useful to understand:
- Is it a server-side or client-side data store?
- Is it an XLS or an XLSX file you are trying to write?
- What's the data volume?

Getting error "Error connecting to MDEX" while trying to open micro browser

Hi,
I am using endeca Tools and framework 3.1.0 and MDEX 6.3.0.
While trying to open micro browser from Workbench UI to create page template configurations,I am getting following message in popout:
Error connecting to MDEX. The data service associated with this editor is not correctly configured.
Please guide the if you have any clue.
Thanks,
Mayank Batra

I have successfully configured RecordSpotlight editor to use a different endeca instance. What I did is modify apps\[your app name]\config\editors_config\services\dataservice.json file with updated endeca search configuration, save the file, and run apps\[your app name]\control\set_editros_config.bat to apply the change.
To verify, you can run apps\[your app name]\control\export_site.bat command to export your site configuration, the updated data service config should show in the site xml file exported.
Hope it helps,
Michelle

Socket read error: connection reset by peer

Hi.
Has anybody experienced the error message �Socket read error: connection reset by peer�
Please see below for detailed information.
Appreciate your help
Regards
RT
Enviroment specification
Server: HP/UX 11.00 64-bit, Oracle RDBMS 8.1.6.0.0 64-bit
2 firewalls between client and db.
Client:
Win 2000,
SP3,
Oracle Client 8.1.7.0.0 ,JDBC OCI (thin JDBC driver,class12.zip)
JDK 1.3
JRUN3.0
The TCP protocol is being used in the communication
Error messages
Web Users receive: Socket read error: connection reset by peer
Trace files on the sever: Read unexpected EOF ERROR on 18.
Explanation: The error in the server sqlnet trace file, suggests that a client connection has terminated abnormally, i.e. client machine powered off, a cable removed or a network connection aborted without warning. No user has complained of such a problem and there is no client trace with an error.
The problem
The users of the java web application, experiencing an exception almost once or twice a day.
The JRUN web-server reports broken connections to the db and client are receiving "connection reset by peer".
At the moment when the errors occurs the users just have to wait a while(2-10 min) and then they can use the web application again.(no action is taken)
This problem can not be reproduced. The problem happens only occasionally when the network is under heavy load and new DB connection is being created.
The application
The java web-application uses a customized connection pooling against the database. This pool is shared among all the users of the website. whenever a user process needs to fetch data from the database, a free connection from this pool is allocated. The application is testing if the connection is valid before making a transaction (select '1' from dual). When the error occurs a ORA-3113 end-of-file on communication channel is returned to the application.
The path between the client and db involves at least two firewalls. The firewalls are opened for sql*net traffic. The network group can tell that enquiries from the app.server is not getting feedback from the db. They have not however, identified if the enquiries are reaching the db-srever, or if they are stopped earlier in the network.
Around 1000 users, are using other applications which uses dedicated sqlnet connections against the db and they have not experienced any problems.
Issues considered
Connection pooling
It is a customized connection pooling, developed by Lindorff developers.
I have read through the source code for the connection pooling and it does the job as it should, and in case of bad connection, it tries to create a new connection.
The log file shows that the call to the method DriverManager.getConnection() hangs until the server goes down, which is probably because of the fact that the method DriverManager.setLoginTimeout(), does not take effect and timeout value is Zero. ( According to oracle , Oracle JDBC does not support login timeouts and calling the static DriverManager.setLoginTimeout() method will have no effect).
Firewall
One thing to consider is when the firewall may decide to shut down the socket due to long inactivity of a connection. This will cause problems to JDBC Connection Pool because the pool is not aware of this disconnection at the TCP/IP level; until someone checks out the connection from the pool and tries to use it. The user will get a Socket read error: connection reset by peer.
Jrun timeout paramter is less than the firewall�s timeout so the firewall will not close a connection before Jrun does.
Number of processes the DB can handle
Processes parameter is 1300, , they have not experienced the Oracle error msg �max # of processes reached�.
Port redirection through a firewall:
Since the firewall has a sql net proxy Port redirection through a firewall is not a problem. Problems with port redirection only appear at connect time, but in this situation the connections fail long after the connection is established.
The network group
The network people who investigaged the problem at Lindorff report that there are a significant amount of "dropped packages" between the database server and the jdbc client (web-application) 24 hrs. The reason for this is "unknown established TCP packet" which means that the firewall does not consider these packages to be part of an already established session. The network group believes this happen because one of the hosts send a RESET or FIN signal which the firewall have noticed but are not received by the other host.
It seems like the firewall are dropping packages bacause of "Unknown
established TCP packet" from both the JDBC client and the TNSLISTENER on the database server. The dropped packages are SQL*Net v2 traffic so clearly Oracle products are involved

Presumably something is working.
Thus the problem is not with your code. At least not the database part that you have control over.
That error occurs when the other side closes the socket. Presumably you are catching lost connection exceptions and trying to restore it.

OIM 10.1.4.3 patcher error connecting to 11gr2 DB

Similar Messages

Maybe you are looking for