OIM and charcterset on linux

have to install OIM 11.1.1.5 on linux
Oracle suggest it should have DB with AL32UTF8
what is the right combination of charcterset and ncharacterset must be?
we have UTF8 for NCHAR and AL32UTF8 for characterset?
SELECT * from NLS_DATABASE_PARAMETERS;
SELECT * from NLS_INSTANCE_PARAMETERS;
SELECT * from NLS_SESSION_PARAMETERS;
Thanks.

AFAIK, OIM tables make use of the normal character set and data is always stored in CHAR, VARCHAR2, CLOB columns. So as long as you have created a DB whose NLS_CHARACTERSET is set to AL32UTF8, you should be good.
The value of NLS_NCHAR_CHARACTERSET should not matter.

Similar Messages

OIM and MS Exchange - Invalid mail store name error

hello,
I'm trying to provision a user with a mailbox in Exchange. I have setup SSL between the AD/Exch box and OIM. After a manual provisioning is initiated through OIM, the "Create Mailbox" adapter status is shown as "Rejected".
In the details, the Reason show is "Invalid mail store name passed". However, the mail store name used in the IT Resource Configuration is as per the connector documentation and as seen in the Exchange System Manager console i.e. "Mailbox Store (BASE)" where "BASE" is the name of the computer where AD/Exch is installed.
Am I missing something? Is there a full DN of the mail store required? Is this something to do with the access permissions in AD or Exchange?
Please advise. Thank you!

Hi,
I was able to resolve this by changing the value of "Server Name" value in the IT Resource. The issue is not with the Mail Store Name or "Store Name" rather it's with the "Server Name".
The value of "Server Name" should be the host name without the domain name for example, BASE only instead of BASE.mydomain.com.
The value of "Store Name" should be as shown in the Windows Exchange Admin Console. E.g. "Mailbox Store (BASE)".
Also, ensure that the value "AD User" is added under the "Depends On" for the "Exchange" Resource Object.
Once you provide the values as mentioned above, create a user in OIM and assign AD User and Exchange resources.
The mailbox will not be created/shown in the Exchange Admin Console unless you access the Exchange URL and login with the target user's credentials.
The Exchange URL can be accessed as "http://hostname or IP/exchange". Provide the user's username and password and the Outlook Web Access screen will be displayed.
Now go to Exchange Admin System console and check the mail store if the maiilbox is created.
Hope this helps. Thanks!!

About path and classpath in linux

How to set classpath and path in Linux.
thank you very much!

The class path can be set using either the -classpath option when calling an SDK tool (the preferred method) or by setting the CLASSPATH environment variable. The -classpath option is preferred because you can set it individually for each application without affecting other applications and without other applications modifying its value.
% sdkTool -classpath path1:path2...
-or-
% setenv CLASSPATH path1:path2...
where:
sdkTool
A command-line tool, such as java, javac, or javadoc. For a listing, see SDK Tools.
path1:path2
Paths to the .jar, .zip or .class files. Each path should end with a filename or directory depending on what you are setting the class path to:
For a .jar or .zip file that contains .class files, the path ends with the name of the .zip or .jar file.
For .class files in an unnamed package, the path ends with the directory that contains the .class files.
For .class files in a named package, the path ends with the directory that contains the "root" package (the first package in the full package name).
Multiple path entries are separated by colons.
The default class path is the current directory. Setting the CLASSPATH variable or using the -classpath command-line option overrides that default, so if you want to include the current directory in the search path, you must include "." in the new settings.
Classpath entries that are not either a directory or an archive (.zip or .jar file) are ignored.

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Is there any difference in the prompts of UCCX 7 (Windows based) and UCCX 9 (Linux based) ?

Are the prompts for UCCX 7 (windows based) and UCCX 9 (Linux Based) are different ?
There are no default prompts available in the script editor folder of UCCX 9.
I have downloaded some prompts from the internet with .wav format, but those prompts are not working.
Can someone tell me if the prompts are different and if they are really different, where to get those prompts then ?
I have also attached the prompts i have downloaded from the internet.

Nope, there's no difference. UCCX uses either G711 or G729 encoded files. You have to encode them first before you upload them. UCCX will not encode them like CUCM does for MOH files. In fact, you can use CUCM's MOH file encoding to encode your files for use within UCCX.
Also, you will not see the system prompts on your workstation where you installed the script editor.
What is it that you are trying to do?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

OIM User Creation Error After OIM and OID Intregation

Hi,
I am new in oim and i am getting popup error message for user creation from OIM application after oim and oid intregation through libovd.
Error message : LDAP create event failed : orclguid attribute has duplicate value.
please guide me for resolving error.
Thanks & Regards,
Rajeev

Hi,
Thanks for reply...i checked1307549.1 in metalink, In that link they are telling us to modify some tables in the data base.i have some question regarding the following steps please help.
=== ODM Solution / Action Plan ===
1. Use the following query to find fields with "plain text" values:
select svr.svr_name, spd.spd_field_name, svp.svp_key, svp_field_value
from svp
inner join spd on spd.spd_key = svp.spd_key
inner join svr on svr.svr_key = svp.svr_key
2. Set these plain text values to null after making backup of table.
*(kashyap:: Which fields values we have to change)*
3. Edit the Directory Server to re-set values.
*(kashyap:: could you please explain this)*
Expected error at this stage:
-- no "System Error call admin...", but that makes sense since the values in question pertained directly to the Directory Server --

S10e -- Can I install Windows XP onto my Linux-Netbook and same way Linux on Windows Netbook?

Hello all,
I wanna buy a S10e and I still have one question:
Can I install Windows XP onto my Linux-Netbook and same way Linux on my Windows Netbook?
I wanna use Suse for all my net applications and still wanna Windows for just old games running on a long trip as flights ect..
Is it possible? Install booth?
Thanks
Message Edited by ykin on 01-24-2009 12:43 PM

Boot Camp will only let you install onto an internal disk. This is largely because of Windows restrictions, not Mac OS restrictions. The beta thread has some supposed approaches to let you do this, using manual steps instead of using Boot Camp Assistant.
Doug

Integration and reconciliation of OIM and OID

I need to do integration with OID and OIM, when i import the XML file, there are two XML files,
1) oimOIDuser
2) oimUser
which xml should be used for the integration of OIM and OID.
and for the trusted source Reconciliation.
-sudhan elango.

oimOIDUser.xml
If you are using OIM 9.1.0 or later then you don't have to import the connector
You can install it by copying the contents of the installation in OIM_HOME/xellerate/ConnectorDefaultDirectory
and then Deployment Manager-> Install connector and from the connector list select OID connector and Load
Hope it helps,
Saggu

Info about OIM and WebCenter integration

Any info or doc/url for OIM and WebCenter integration would be helpful. Any experiences etc please provide some links.

Follow the link -
http://docs.oracle.com/cd/E21764_01/core.1111/e12037/oam.htm#WCEDG345
Follow the below points -
*"Credential and Policy Store Configuration"*
*"Oracle Access Manager 10g Integration"*
*"Oracle Access Manager 11g Integration"*
*"Configuring WebCenter Applications"*
*"Configuring WebCenter and BPEL Authentication"*
*"Backing Up the Installation"*

OIM and ldap sync

I am using OIM 11gR2 and OID 11.1.1.6. Users and groups will be in OID, and OIM is
required to do the provisioning of users. Plan is to use ldap sync between oid and oim.
With ldap sync, all users will be available in OIM. And then in OIM can one do the
provisioning of users. Is this approach ok? Or should we have OID connector? Or both?

You can use LDAP Sync between OIM and OID. You dont need OID connector in this case.
More here...
Why would you use the LDAP Sync instead of the OID Connector?
http://fusionsecurity.blogspot.com/2012/01/oim-11g-ldap-synchronization.html

Best practices on enterprise and application roles in OIM and OAM 11g?

Hi, all,
I wonder if any of you can give me some advice on role design for OIM and OAM 11g. I'd like to have both enterprise roles, such as Accountant II, and application roles, such as App1_User, App1_Admin, etc. Ideally, the enterprise role would automatically give the user the appropriate application roles, but I can't figure out how to do that. We tried using OIM 11g's inheritance, but when the application role is inherited, OAM doesn't see it in OID/OVD and therefore doesn't think the user has the correct authorization to access the application. I thought about using role membership rules, but those seem to only allow you to use user attributes to control membership, which doesn't help at all in my situation.
How is this situation best handled? Any advice much appreciated!
Ariel Anderson
Senior Business Analyst
Zirous, Inc.

Hi,
I am assuming in clustered environment you are having two instances running.
It must be an issue with a single server,,because the problem is intermittent.
To see which server is causing problem....just perform the following steps:
1) Stop server1 and keep running server2..and fire new registration request...
2) stop server 2..and keep running server1.....and fire new registration request.
Using above, atleast you can see which server is causing the problem...
Regards,
J
Edited by: J_IDM on Mar 21, 2011 10:52 PM

Single credential for logging to OIM and integrating resources

Hello Friends,
I can have a single user account and password for the application IOM and all resources to be set (AD), for example: If a user who has access to the application of IOM with the credentials (user / password = jlk / jlkoim), and automatic provisioning is ADUs provisions the resource, and when I authenticate the team assigned to the domain, you could use the same credentials of the implementation of IOM.
What are the advantages and disadvantages might have with this scenario? What would be the best alternative in this scenario?
Thanks.

It is a common requirement of any client that maintaining password from OIM.
For sending Password to AD you need to setup SSL between OIM and AD.
Advantage:
Password will be maintained by OIM in all the resources and all passwords will be in Synch.
Cost Saving

Compile forms and reports in linux os

hi,
i like to know how to compile forms and reports in linux os?
please provide me the commands for compiling of forms and reports.
Regards
Ravikumar.A

hi
i do not know u r form version but the following command is for Forms [32 Bit] Version 10.1.2.0.2 (Production)
try this.
@ECHO OFF
cls
Echo compiling libraries 10g ....
for %%f IN (*.pll) do frmcmp userid=User_name/pass@orcl module=%%f batch=yes module_type=library compile_all=yes window_state=minimize
ECHO libraries compilation complete
ECHO ----------------------------------
Echo compiling menus 10g ....
for %%f IN (*.mmb) do frmcmp userid=User_name/pass@orcl module=%%f batch=yes module_type=menu compile_all=yes window_state=minimize
ECHO menus compilation complete
ECHO ----------------------------------
Echo compiling forms 10g ....
for %%f IN (*.fmb) do frmcmp userid=User_name/pass@orcl module=%%f batch=yes module_type=form compile_all=yes window_state=minimize
ECHO form compilation complete
ECHO ----------------------------------
ECHO Form Compilation completefor linux i think its frmcmp.sh just make changes here.
sarah

Lib32-util-linux and lib32-util-linux-ng are in conflict

hi
i'm running a 64bit arch linux (with some 32bit apps)
today i got a strange conflict - and the "solution" seems pretty dangerous to me, or am i wrong?
[root:~]# pacman -S multilib/dwarffortress
resolving dependencies...
looking for inter-conflicts...
:: lib32-util-linux and lib32-util-linux-ng are in conflict. Remove lib32-util-linux-ng? [y/N] Y
Remove (1): lib32-util-linux-ng-2.18-3
Total Removed Size: 0.58 MB
Targets (41): lib32-libxfixes-4.0.5-3 lib32-libxdamage-1.1.3-3 lib32-pcre-8.10-3 lib32-dbus-core-1.4.0-2 lib32-glib2-2.26.1-2
lib32-atk-1.32.0-1 lib32-pixman-0.20.2-1 lib32-cairo-1.10.0-3 lib32-pango-1.28.3-1 lib32-util-linux-2.19-1
lib32-e2fsprogs-1.41.14-2 lib32-openssl-1.0.0.d-1 lib32-db-5.1.19-1 lib32-sqlite3-3.7.4-1 lib32-heimdal-1.3.3-3
lib32-ncurses-5.7-6 lib32-readline-6.1.002-3 lib32-libgpg-error-1.9-4 lib32-libgcrypt-1.4.6-3 lib32-gnutls-2.10.4-1
lib32-libtiff-3.9.4-3 lib32-gdk-pixbuf2-2.22.1-1 lib32-libcups-1.4.5-1 lib32-libxcursor-1.1.11-1
lib32-libxrandr-1.3.1-1 lib32-libxi-1.4.1-1 lib32-libxcomposite-0.4.3-1 lib32-gtk2-2.22.1-2 lib32-libdrm-2.4.23-1
lib32-libxxf86vm-1.1.1-1 lib32-libgl-7.10.1-1 lib32-mesa-7.10.1-1 lib32-sdl-1.2.14-8 lib32-sdl_image-1.2.10-3
lib32-flac-1.2.1-7 lib32-libsndfile-1.0.23-2 openal-1.12.854-2 lib32-openal-1.12.854-4 sdl_ttf-2.0.10-1
lib32-sdl_ttf-2.0.10-3 dwarffortress-0.31.21-1
Total Download Size: 9.07 MB
Total Installed Size: 79.96 MB

ulukay wrote:
ngoonee wrote:Firstly, searches are not cached, so noone would be able to view your link properly. However yes somehow I've seen that the other threads on this are not turning up, so I suggest instead searching for 'util-linux', not 'lib32-util-linux', you will find the solution then.
1. thanks for not simply posting a link
2. that search would return threads regarding this problem on 32bit hosts - i run a 64bit host. my main concern is that this would install incompatible 32bit binaries.
1. You're welcome. Self-help is the best kind.
2. If you'd done the search I recommended you would have seen that the problem is not related to arch at all, but is due to upstream renaming.

Is Teststand able to install and implement on Linux system

Hi,
I was using Testsand on windows before,
Just want to know that if NI Teststand able to install and implement on Linux/Unix system?
Thanks,
Solved!
Go to Solution.

Since TestStand is an ActiveX Server and i am not aware of any well written ActiveX wrappers for Linux, i doubt that it will work.
Officially, TestStand is only supported for Windows. So if you achieve by any what-so-ever-open-source-code to install and run TestStand on Linux, you wont get any support from NI if anything unexpected happens.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

OIM and charcterset on linux

Similar Messages

Maybe you are looking for