Ok, new Question: LDAP or NIS

I was recommended NIS here on these forums (LDAP was not mentioned).
I have only been reading about how to get NIS working, but finally came across some guy wondering why people were still trying to use NIS.
So... LDAP or NIS?
EDIT:
Ok so whatabout Kerberos? Should I use Ldap AND Kerberos, or is LDAP enough? I want a robust, scalable system.
EDIT
Read some more. Conclusion: Screw the security for now. I'm going for LDAP. Input still welcome.
Last edited by iOfWhy (2014-01-09 00:07:33)

You can set it to manually update songs and playlists so that the buyer doesnt have to. Like i told you in your other post, when he plugs it in to his computer, a window will pop up. It will ask if he wants to link that ipod to his library. if its manually update, then he should click yes.
Another thing he could do it select all the songs in his library (a faster way to do this is to click on the top song, then hold shift and click on the bottom songs, selecting the whole library), right click, and press uncheck this solection. Since they are unchecked, they wont update onto his ipod. The same method applies to checking the whole library.
-Taps-

Similar Messages

  • How can I create a new Question thread?

    How to create a new "Question Thread" regarding the account payment ?

    Hello MotionBoy,
    There are two ways to go about creating a new thread to run a step.  The first is to create a new sequence, into which you put the LabVIEW step you want to run and any other steps that may go along with it.  Then use a sequence call step to call this newly created sequence.  Set the Execution Options of the Sequence call step to 'Use New Thread.'  This will allow you to run a set of steps in a new thread, not just a VI.  The second method, which is only available for a LabVIEW VI, is to use the “Run VI Asynchronously” step.  This can be accessed if you right-click within your sequence and select Insert Step » LabVIEW Utility » Run VI Asynchronously.  This step will allow you to call a VI and have it automatically open in a new thread.  You can further customize this step by opening the configuration menu in the Step Settings.
    To address the current behavior of your steps I would like to know if the modules in steps 1 & 2 pass data between them or it would be desirable for them to do so?  If so you are going to need a more complex synchronization structure such as TestStand/LabVIEW queues. There is a simple example you may want to look at in the TestStand examples, under the Synchronization folder that demonstrates how to use queues. Otherwise the above solution should be all you need.
    John B.
    Applications Engineer
    National Instruments

  • New Questions not displaying on a page Survey App Part SharePoint 2013

    I wanted to insert a survey app part on a page in my site so i followed steps mentioned in the below link
    http://sharepoint.stackexchange.com/questions/86903/showing-only-survey-questions-in-page
    it successfully created but now when insert another question into the survey list which i created above it does not show that question onto the page it only displaying 3 questions which i added when i was creating a survey list
    can anyone help me in showing new question as well.

    Hi ,
    Please re-insert the list new item form web part on that page as your above article mentioned steps, then check results again.
    Thanks
    Daniel Yang
    TechNet Community Support

  • New question regarding iPod Video (converting from a DVD)

    First off...thanks again for those who helped me before. iSwuint seemed to work best for mac conversions for the new ipod. My new question is how to copy a dvd to make it compatible also using a mac. I know there is a program for pc that works, but I am using a g4 laptop. Thanks again in advance.

    The problem seems to be that it is seeing all the chapters as titles. The longest title is 22 min and it is like a hour and a half movie. Has anyone else had this problem.
    HandBrake sometimes has a problem listing all of the titles contained on a DVD. When HandBrake scans the title you may notice that it reads them all but when the list is generated, some entries in the list are omitted. This is likely what happened here. There are two approaches you can try. The first is to switch to an alternate application. The second would be to rip/extract the main title using a separate application like MacTheRipper and then use HandBrake's "browse" function to navigate to the appropriate VIDEO_TS folder files.

  • New "Questions Answered" Spotlight Award

    I'm pleased to announce our new "Questions Answered" Spotlight Award.  The first awardee will be recognized in March.
    Questions Answered Award:  This  award is intended to recognize a Support Community member whose  contributions have resulted in answering the most number of questions on  our community.  At the end of each month, that member who has the most  number of  “Answered Questions” will be recognized with a community  Spotlight Award.
    Award Duration: 1 month
    Please visit ourSpotlight Awards page for more information on the Program.
    Cheers,
    Dan       

    Hello Dan, I hope you're well.
    Why does it say 'unanswered questions' rather than questions answered, or is it a totally different award?
    It is like the opposite almost!
    https://supportforums.cisco.com/community/netpro/top-contributors/spotlight-awards
    Please rate useful posts & remember to mark any solved questions as answered. Thank you.

  • New to LDAP

    hi, im working on a login application , that is in struts and i have to use LDAP in that ... i m very new to LDAP....i dont know anything.........pls can any one help me.? can u pls give me one simple code example of LDAP.
    thanks

    hi,
    love google

  • Why do I have to click through4 or 5 web pages after clicking on "ask a new question" before I get to ask the question?

    Yes, there is a link to "Ask a new question" but it has no input box. I have to click several more times before finally getting to type my "question" - which is really only a Subject: line, not the full-fledged question that finally shows up under "add more details."

    Do you have a Firefox support question?

  • HT5312 I forgot my security questions and  I don't have a rescue mail, how I can set new questions? Or retrieve the old?

    I forgot my security questions and  I don't have a rescue mail, how I can set new questions? Or retrieve the old?

    Apple ID Security -
    Telephone Apple Care for your country and ask for the Account Security Team, then request help resetting the questions.

  • New Questions.. publish iMovie to iDVD

    SDMacuser & J Keller,
    Thanks for all your help, however as I work through things more questions arise
    I'll cut & paste entries and new questions under..
    But before I do that just want ya'll to know that I cleaned up old versions of various DVD projects and found that any Garage Band mix (sometimes mix 2 or 3 versions) takes up a ton of bytes, so I deleted versions I was not using.
    BLUF I went from 20gb to 31gb free hard drive space, short of the 40gb recommended but better than before
    OK on to other questions:
    SDM A: Welcome to apple discussions. Might not be the TV unless you set it to overscan. If this isn't the case then the easiest way IMO is to drag and drop the movie to iDvd's slideshow feature where it will properly scale the movie for you.
    Q: Want to make sure I understand.. So in iMovie to media browser a 'large' (better quallity) movie and publish. Then in iDVD when you select the published movie, instead of dragging it to the movies drop; you drag it to the slideshow drop and that will automatically resize for TV. Is that correct?
    SDM There's also the option w/in iDvd for setting up "TV safe area" and making sure none of the titles or buttons fall outside the TV Safe area. The TV Safe area is shown in a thin red outline below.
    Q: Did this, saw it on the menu iDVD page, but could not get that red frame to show during either the preview (small window) or the large play window. Is it possible to do this? Since I have now burned two drafts that play fine on the computer but run-off on the TV.. Not anxious to repeat this failure
    Q: Also when I selected TV Safe .. the computer seemed to process for a bit ..
    Does that mean that ther movies have been resized?
    This morning (under a time constraint), in iMovie (selected from iDVD) I published a large movie (where a small movie with teh same title was) took about 20-30 minutes .. did not make a separate iMovie but filled in teh large box in the iMovie app .. Q: so is this a small or large movie (both are filled in)?
    So Lastly, in order to fix what I've doinked up here:
    republish all (currently small) movies as large movies
    start a new iDVD project and place the movies in the slideshow drop area
    burn
    G5 Mac OS X (10.5.8) Leopard 2Ghz

    SDMacuser & J Keller,
    Thanks for all your help, however as I work through things more questions arise
    I'll cut & paste entries and new questions under..
    But before I do that just want ya'll to know that I cleaned up old versions of various DVD projects and found that any Garage Band mix (sometimes mix 2 or 3 versions) takes up a ton of bytes, so I deleted versions I was not using.
    BLUF I went from 20gb to 31gb free hard drive space, short of the 40gb recommended but better than before
    OK on to other questions:
    SDM A: Welcome to apple discussions. Might not be the TV unless you set it to overscan. If this isn't the case then the easiest way IMO is to drag and drop the movie to iDvd's slideshow feature where it will properly scale the movie for you.
    Q: Want to make sure I understand.. So in iMovie to media browser a 'large' (better quallity) movie and publish. Then in iDVD when you select the published movie, instead of dragging it to the movies drop; you drag it to the slideshow drop and that will automatically resize for TV. Is that correct?
    SDM There's also the option w/in iDvd for setting up "TV safe area" and making sure none of the titles or buttons fall outside the TV Safe area. The TV Safe area is shown in a thin red outline below.
    Q: Did this, saw it on the menu iDVD page, but could not get that red frame to show during either the preview (small window) or the large play window. Is it possible to do this? Since I have now burned two drafts that play fine on the computer but run-off on the TV.. Not anxious to repeat this failure
    Q: Also when I selected TV Safe .. the computer seemed to process for a bit ..
    Does that mean that ther movies have been resized?
    This morning (under a time constraint), in iMovie (selected from iDVD) I published a large movie (where a small movie with teh same title was) took about 20-30 minutes .. did not make a separate iMovie but filled in teh large box in the iMovie app .. Q: so is this a small or large movie (both are filled in)?
    So Lastly, in order to fix what I've doinked up here:
    republish all (currently small) movies as large movies
    start a new iDVD project and place the movies in the slideshow drop area
    burn
    G5 Mac OS X (10.5.8) Leopard 2Ghz

  • I need to ask a new question, but I need to include images for a better explanation, what source do you recommend?

    Hello everyone,
    I need to ask a new question, but i would like to do it more illustrative, showing some images, I am new on this forum and I would like to follow the best practices and standards on how to ask a "picture" question, is there a way i can refer to
    a source? i tried Instagram in the past is that ok?
    Thank you.

    After your forums account is verified, you can directly post/upload pictures into your posts, using the editor toolbar in the question/reply. This forum limits to two images per post/message.
    you can request your account be verified, by adding on to the thread here: (Verify your account NN)
    http://social.technet.microsoft.com/Forums/en-US/home?forum=reportabug
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Please read this before posting any new questions about AFL

    Getting your AFL questions answered quickly and effectively is really important to us, before you post any new questions, please check out the existing conversations or below links for an answer to your query.
    There is also a host of information available at http://www.afl.com.au/ however we'd suggest you take a look at the support material provided here as many freuqently asked questions have already been answered.
    We've also taken time to create threads with common questions for you. Check them out below:
    General FAQs
    AFL Live Pass FAQs
    AFL App FAQs
    Fantasy & Tipping FAQs
    Streaming FAQs
    AFL App Troubleshooting
    If you still need a further hand or can't find what you're looking for, one of our friendly 24x7 support team will be happy to help, please post your question here

    Getting your AFL questions answered quickly and effectively is really important to us, before you post any new questions, please check out the existing conversations or below links for an answer to your query.
    There is also a host of information available at http://www.afl.com.au/ however we'd suggest you take a look at the support material provided here as many freuqently asked questions have already been answered.
    We've also taken time to create threads with common questions for you. Check them out below:
    General FAQs
    AFL Live Pass FAQs
    AFL App FAQs
    Fantasy & Tipping FAQs
    Streaming FAQs
    AFL App Troubleshooting
    If you still need a further hand or can't find what you're looking for, one of our friendly 24x7 support team will be happy to help, please post your question here

  • Please read this before posting any new questions about NRL

    Getting your NRL questions answered quickly and effectively is really important to us, before you post any new questions, please check out the existing conversations or below links for an answer to your query.
    There is also a host of information available at http://www.nrl.com/ however we'd suggest you take a look at the support material provided here as many freuqently asked questions have already been answered.
    We've also taken time to create threads with common questions for you. Check them out below:
    General FAQs
    Digital Pass FAQs
    NRL App FAQs
    Tipping & Fantasy FAQs
    Streaming FAQs
    NRL App Troubleshooting
    Laptop troubleshooting
    If you still need a further hand or can't find what you're looking for, one of our friendly 24x7 support team will be happy to help, please post your question here
     

    Although I appreciate the sentiments and would speed the initial diagnosis. I do feel it would put some members off, in particular ones who have had a issue for some time and more so customers who have had the "helpline" experience and have been passed pillar to post.  Being directed to another link comes across for me, as a bit "helpline".  I feel at this point, many would want some 1 to 1  (therapy) and they are being listened too with regards to there broadband issue. 
    I've seen users irate very recently, just by a simple request of hub stats posted by copy & paste.  We all do it, however it can come across, corporate avoidance (helpline).  At times I have PM,  something similar with regards to our end responsibilities, depending how I believe, they are presenting themselves on the forum
    Mortgage Advisor 2000-2008
    Green Energy Advisor 2008-2010
    Charity Health Care Provider Advisor 2010-
    I'm alright Jack....

  • NIS+/LDAP-Gateway  Nis+ Credentials lost after some time

    Hello,
    I have configured an NIS+ Server with NIS compatibility under Solaris. Then I have installed an Sun Directoryserver on the same machine and populatet the LDAP-tables with the rpc.nisd gateway. Everything works fine. Even with TLS-Encryption.
    The Server works perfect and the LDAP-Clients and NIS+ and NIS-Clients work too.
    But after some days you can do an niscat cred.org_dir on the Server and the Nis+-Credentials are ok. 5 seconds later you do the same niscat in the same shell and the cred.org_dir table is only half filled. When you repeat the Command again, all NIS+-Credentials are lost and the server is death.
    I have the same problem with the Directory Server 5.1 on Solaris 9 sparc, on Solaris 10 beta x86, on Solaris 10 beta sparc and with directoryserver 5.2 on Solaris 10 final sparc.
    I think it is a Problem with the NIS+LDAPmapping file or the rpc.nisd configuration.
    Please help me.
    With friendly Greetings from Germany
    Ralf

    There's a book at http://docs.sun.com called "Solaris Administration Guide: Naming and Directory Services (DNS, NIS and LDAP)". This will answer a lot of your questions.
    The file you're looking for is /var/ldap/ldap_client_file. Unforntunately, it's a "chicken and egg" design. The ldapclient program creates this file when you use the "init" option. But, the ldap_cachemgr daemon actually updates it from the LDAP specified in the file. The ldapclient program also creates /var/ldap/ldap_client_cred. This contains the credentials that ldap_cachemgr uses to authenticate with the server.
    What I do is modify the LDAP and then SIGHUP ldap_cachemgr, avoiding the use of ldapclient. I used ldapclient to build the cred file and get the initial LDAP settings and file format. After that, I've never used it.
    HTH,
    Roger S.

  • Set Up Native LDAP without NIS?

    The Blueprint documents covering native LDAP support for Solaris 8 are very NIS-centric. I do not have NIS configured for my workgroup, and I do not wish to create the whole NIS domain just to turn around and import it into LDAP.
    The 'dsimport' command information says:
    "The dsimport command takes a text file in /etc/files format as input. Typically, you use the same files that are maintained to generate your NIS maps." Okay, I'm game...
    When I attempt to use the dsimport command, it first core-dumped without doing anything. I obtained a newer version from patch 106621-09, but this one insists on finding the current
    /etc/opt/SUNWconn/ldap/current/dsserv.conf, which is the NIS-to-LDAP agent daemon. Not a good solution!
    What am I missing here? I don't relish the idea of keying every detail through the Directory Console. This was supposed to make management easier, not harder!

    I'm not should your problem coming from. Did you apply the Solaris Extensions for Netscape Directory Server 4.X patch 109953-02. If not, try to apply it first. Because original version have a lot of unknown problem.
    For download, goto http://www.iplanet.com/downloads/patches/ & find
    Solaris Extensions for Netscape Directory Server 4.X patch 109953-02
    Lucas

  • HT1420 i forgot my answers to my security questions, how do i setup new questions and answers?

    I have forgotten my answers to my security questions, how do i setup new security questions and answers?

    Welcome to the Apple Community.
    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Maybe you are looking for