Old How to find total number of events in an event list?

Hi,
I am developing a j2me application. i Want to find the total number of events in an event list.(ie, If it contains 15 events then it should return length as 15).
Not the length of EVENT LISTS i want to find the Length of EVENTS.
Thanks,
kumar

Hi,
you can find the number of columns and their order using
the 'REUSE_ALV_FIELDCATALOG_MERGE'
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = sy-repid
 I_INTERNAL_TABNAME = 'ITAB'
 I_INCLNAME = sy-repid
changing
 ct_fieldcat = IT_FIELDCAT
EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay

Similar Messages

How to find total number of records in a BDoc?

Dear all,
I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
Please help and points will be rewards!!
Thank You
Best Regards,
CK

I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6     loop
7        if v_cnt = 0 then
8           v_cnt := rec.rn;
9        end if;
10     end loop;
11     if v_cnt = 0 then
12        raise zero_rows;
13     end if;
14   exception
15    when zero_rows then
16      dbms_output.put_line('No rows');
17   end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from
6          (select rownum rn, e.ename from emp e)
7          order by 1 desc)
8     loop
9        if v_cnt = 0 then
10           v_cnt := rec.rn;
11           dbms_output.put_line(v_cnt);
12        end if;
13     end loop;
14     if v_cnt = 0 then
15        raise zero_rows;
16     end if;
17   exception
18    when zero_rows then
19      dbms_output.put_line('No rows');
20   end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri

How to find total number of employees for an organisation

Hi Experts,
Need help in finding the total number of employees working in an organization. Please let me know if I need to run a report or if there is any T Code.
Appreciate your help at the earliest.
Regards,
Subbu.

Hi
Try this out
T code :Paah
Select the key field Per nr for out put
GO to organizational Assignment select the Employee group for selection
and also Organizational Unit for selection.it will come to the right hand side
Give the input ESG as 1 for active and also input the org unit (dept) u require to
see the list of employees
and press out put for list or else hit list for number of employees
with regards
partha
keep sharing and learning

Hw to find total number of records

Hi All,
Can anyone help from these
1. how to find total number of reports for a particular cube/ods... need step - step solution
2. how to find total number of records for a particular Cube and ODS and Aggr's to till date.
3.what is sandbox,mirror sys,instance of a sys..?
4.what r TWS(Tivoli Workload Scheduler) jobs? how these r different to standard schedulers?
Thanks in ADv
Linda

Hello Linda,
As you have lots of answers on first 2 so i'll start from 3rd onward.
3. Sandbox is mostly practice system where you can do all kind of R&D, mirror sys can be mirror image of any system depends on the organization and instance of system is again mirror image of one system.
4. TWS is third party tool for scheduling which doesn't come along with SAP like standard scheduler as TWS has been prepared specially for this purpose so it has some more features than standard.
Hope it helps.
San.

How to find the number of records per months in cube

Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
Jimmy

Hi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
 tabname type dd02l-tabname,
 end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
 FILENAME = 'c:records.xls'
 FILETYPE = 'ASC'
* APPEND = ' '
 WRITE_FIELD_SEPARATOR = ','
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
TABLES
 DATA_TAB = itab1
* FIELDNAMES =
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* OTHERS = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to find total no of record in cube

Hi Experts,
How to find total no of records in a cube.
Thanks in Advance.

Hi
If you want total number of records in a CUBE then you have to check in both F Table and E table.
Go to LISTSCHEMA tcode in your system, give your CUBE name and execute.
You will fine two table E and F table
goto SE16 -->give the table name and click on number of entries.You will get number of records.
Check the below thread
No of records in /size of Info cube
Regards,
Venkatesh

How to find total recs in a local table for a particular condition

Hi,
How to find total recs in a local table for a particular condition?
Thanks,
CD

Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 <> 'A'.
lv_count = lines( itab_tmp ).
Regards,
Rich Heilman

To find total number of files inside folder

Hai,
   In knowledge management is there any option to find total number of files inside folder...
    I also want to see the recently uploaded and modified documents in a seperate iview...
    Iam using NW2004s SP8..
    Very urgent..
    Waiting for a positive reply..
    Thanks&regards,
     Kiruthika.S

Hi Kiruthika,
1. You only need the configarchive if you don't want create all the KM configuration objects mentioned in the guide manually. So, just create the objects mentioned there and you don't need the configarchive
Also, the scenario works also on 2004s.
2. Please check this thread on how to show the total number of files inside a folder:
https://forums.sdn.sap.com/thread.jspa?threadID=19610
3. It would be nice if you would consider rewarding the time people like Saravanan spend to investigate and answer your question by assigning points via the colored stars.
Best regards,
Robert

Find Total Number of Rows in Database

I am trying to find total number of rows in Database? Thanks in advance

I'd come back to a question of "why". What possible reason could you have to want to know the number of rows in every table in the database?
This seems like it is a request from someone non-technical where they're not sure exactly what they need to ask to get the information they want. I'm forseeing something along the lines of
User: How many rows are in the database
DBA: Ummm.... <<goes off and spends a lot of resources to count>>> ... 1 billion.
User: Wow, that's a lot... How big are those rows...
DBA: Hmmm... <<goes off and spends more time trying to find an average row size>>... 100 bytes
User: <<Plugs numbers into Excel>>... OK, our database is 93 GB, so we need to order 100 GB of disk for our new environment.
DBA: <<Months later, after 100 GB of disk has been budgeted, purchased, and delivered>> User, you didn't order enough disk for our disaster recovery environment.
User: You said our database was only 93 GB!!
DBA: 93 GB of data. Plus 100 GB of indexes, TEMP, UNDO, space for archived logs, ...
When "odd" requests come down, it's generally the case that the person asking the question doesn't know what question they really want to ask because they don't have the domain knowledge to know how to ask the question. Walking over and asking them what they're hoping to accomplish/ what they're using the data for generally leads to a case where
- The user gets exactly the information they need, not the information they think they want
- The DBA does a lot less work, since the right question is almost always easier to answer
- The user thinks of the DBA as a really helpful sort of guy and remembers how helpful you were in the past when you have to push back on other things later
- No one ends up playing the blame game when the user gets just what they asked for and not what they want.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to find total memory for Oralce Memory utilization

Hi,
How to find total amount of memory utilized by oracle including SGA+PGA+PROCESS
Thanks,
Abk

Is you OS 32-bit ? If you add /3gb in boot.ini , then it will limit oracle.exe to go only upto 3gb.
Add /PAE in the boot.ini and remove /3gb.
then use db_block_buffers parameter instead of db_cache_size
for using db_block_buffers, you need to set another parameter also.
use_indirect_data_buffers=true
db_block_buffers=<number of blocks
db_block_buffers=db_cache_size in kilobytes /db_block_size
(since db_block_size is 8 kllobytes by default in Windows..
{color:blue}Please refer Metalink Note : [373602.1|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=373602.1]{color}
Edited by: Mahesh Menon on Apr 29, 2009 2:56 PM

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to Find PO Number after Importing PO through Interface Table

Hello All,
I am Importing PO through an Interface. now I wanted to find PO Number(Segment1) which has been created.
Please tell how to find PO Number....?
Thanks in Advance
Regards
Ravi Raj.

Got Answer

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

Old How to find total number of events in an event list?

Similar Messages

Maybe you are looking for