How to find total number of employees for an organisation

Hi Experts,
Need help in finding the total number of employees working in an organization. Please let me know if I need to run a report or if there is any T Code.
Appreciate your help at the earliest.
Regards,
Subbu.

Hi
Try this out
T code :Paah
Select the key field Per nr for out put
GO to organizational Assignment select the Employee group for selection
and also Organizational Unit for selection.it will come to the right hand side
Give the input ESG as 1 for active and also input the org unit (dept) u require to
see the list of employees
and press out put for list or else hit list for number of employees
with regards
partha
keep sharing and learning

Similar Messages

FMS to Find total number of Quantity for all Sales Orders

Hi Experts,
I am trying to get the total number of quantities for the current document. Kindly help me out how to find it out for the current document.
Currently I am giving the document no. to the query by modifying the query every time before executing it. but how can i do this without giving the document numbers and executing the query directly.
Kindly help ...
Thanks and regards,
Amit.

Hi,
Please follow below steps to get total quantity.
1. Run below query first in query generator
SELECT sum(T1.[Quantity]) FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE t0.docnum = $[ORDR.docnum]
2. After execute, save it under query manager with required name
3. Open sales order and run saved query
4. Total quantity will be displayed in query result.
refer below screen shot:
Thanks & Regards,
Nagarajan

How to find total number of records in a BDoc?

Dear all,
I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
Please help and points will be rewards!!
Thank You
Best Regards,
CK

I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6     loop
7        if v_cnt = 0 then
8           v_cnt := rec.rn;
9        end if;
10     end loop;
11     if v_cnt = 0 then
12        raise zero_rows;
13     end if;
14   exception
15    when zero_rows then
16      dbms_output.put_line('No rows');
17   end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from
6          (select rownum rn, e.ename from emp e)
7          order by 1 desc)
8     loop
9        if v_cnt = 0 then
10           v_cnt := rec.rn;
11           dbms_output.put_line(v_cnt);
12        end if;
13     end loop;
14     if v_cnt = 0 then
15        raise zero_rows;
16     end if;
17   exception
18    when zero_rows then
19      dbms_output.put_line('No rows');
20   end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri

Old   How to find total number of events in an event list?

Hi,
I am developing a j2me application. i Want to find the total number of events in an event list.(ie, If it contains 15 events then it should return length as 15).
Not the length of EVENT LISTS i want to find the Length of EVENTS.
Thanks,
kumar

Hi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_INCLNAME                   = sy-repid
changing
    ct_fieldcat                  = IT_FIELDCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay

How to get total number of products for the site?

Hi,
I want to know the total number of products available for the site. i checked in the dcs_product table, it shows 40849 unique products. is this the total number of products count which are used in the site?
I have another table in CATA schema dcs_product_sites, when i run the CatalogMaintenanceService to populate the records in this table, getting only 26000 products. Please let me know why this difference when i run the service.
Thanks

dcs_product table gives all products in your catalog.
dcs_product_site will give products for a particular site.
If you have more than one site, then you need to query for that particular site.
And the number of products you show also depends upon the start and end date on the products.
And also some custom filters you have like Out of stock items etc.
Peace
Shaik

How to find out number of includes for a given program dynamically

Hi all
I have a requirement in which, I have to find out number of includes and their names for a given user defined program dynamically
if u know the answer pls let me know
Thanks in advance
Devi

Hi rama,
1. use this FM - RS_GET_ALL_INCLUDES_FOR_PRTAB
regards,
amit m .

How To calculate Total Number of Employee in shift wise

Dear Gurus,
my requirement is calculate the total no.of employees present & absent in shift wise.
My output like this.
Department                        Shift       Present           Absent
Information Technology        GSFT       56                   24
Engine Shop                       ASFT     124                   26
                                         BSFT      155                   45
                                                                                CSFT       80                     20
Thanks,
Rajkumar.A

Hi,
You can make a custom report for this.
If you want to know generally there is a head count report available in OM

Hw to find total number of records

Hi All,
Can anyone help from these
1. how to find total number of reports for a particular cube/ods... need step - step solution
2. how to find total number of records for a particular Cube and ODS and Aggr's to till date.
3.what is sandbox,mirror sys,instance of a sys..?
4.what r TWS(Tivoli Workload Scheduler) jobs? how these r different to standard schedulers?
Thanks in ADv
Linda

Hello Linda,
As you have lots of answers on first 2 so i'll start from 3rd onward.
3. Sandbox is mostly practice system where you can do all kind of R&D, mirror sys can be mirror image of any system depends on the organization and instance of system is again mirror image of one system.
4. TWS is third party tool for scheduling which doesn't come along with SAP like standard scheduler as TWS has been prepared specially for this purpose so it has some more features than standard.
Hope it helps.
San.

How to get total number of days

Hi All,
how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
and how to get total number of days in a month.
Thank You,,
Sriii..

Hi Sridhar,
Pls Try to search before posting general questions.
Try this,
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = p_lv_date1
      i_datum_von                   = p_lv_date2
   IMPORTING
     e_tage                        = p_e_date_difference
   EXCEPTIONS
     days_method_not_defined       = 1
     OTHERS                        = 2
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Sunil kairam.

How to find total recs in a local table for a particular condition

Hi,
How to find total recs in a local table for a particular condition?
Thanks,
CD

Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 <> 'A'.
lv_count = lines( itab_tmp ).
Regards,
Rich Heilman

How to find total memory for Oralce Memory utilization

Hi,
How to find total amount of memory utilized by oracle including SGA+PGA+PROCESS
Thanks,
Abk

Is you OS 32-bit ? If you add /3gb in boot.ini , then it will limit oracle.exe to go only upto 3gb.
Add /PAE in the boot.ini and remove /3gb.
then use db_block_buffers parameter instead of db_cache_size
for using db_block_buffers, you need to set another parameter also.
use_indirect_data_buffers=true
db_block_buffers=<number of blocks
db_block_buffers=db_cache_size in kilobytes /db_block_size
(since db_block_size is 8 kllobytes by default in Windows..
{color:blue}Please refer Metalink Note : [373602.1|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=373602.1]{color}
Edited by: Mahesh Menon on Apr 29, 2009 2:56 PM

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

How to find Spool number for a 2 steps background job.

Hi All,
How to find spool number (and also the background job name ) for a 2 steps background job.
in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
Thanks,
Shiva.

Which one creates the spool? (first one I guess)
What kind of spool? (WRITE, sapscript, smartform, pdf...)
Do you use special statements like NEW-PAGE, or other things?
Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...)

How to find maximum number of users we can assign for Hyperion Planning.

HI,
How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
In Essbase propreties, the system is showing maximum planning users could be 65535.
what would be the number for concurrent scenario?
Thanks
Giri
Edited by: Giriprasad on Jun 18, 2012 2:18 AM

The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
Cheers
John
http://john-goodwin.blogspot.com/

How to find serial Number for BCC Plugin?

Hi,
How to find serial number for Bcc plugin on FCP?
I need format my Mac so before that I to find the serial number?
Please anyone can help me....

The serial number has the format like E-111-aaa-222-bbb-333-ccc-444-ddd-5ee-ffff, it can be found on a piece of paper which has 3 stickers with it inside the box.

How to find total number of employees for an organisation

Similar Messages

Maybe you are looking for