Old items are not populated after adding items into a master/detail form

Hi,
I am relatively new to APEX. I am creating a master/detail form. It works well. When I add new items the older items are no more populated. Why ?
For example I have an itme which is a select list as a Named LOV. At creation of the row I want the user to choose from this select list. It works well.
But when modifying the record, I don't want the user to change this name. For that purpose, I create an item which is a display only item. This item is conditional and appear only when the record has been created.
And this is where the problem comes. It seems to work but, if I logout of the application and login, then values are no more populated to the items and I get an error when trying to update the form.
I hope I make it clear. I have been trying a lot of times and found that if I add items, then everything goes wrong.
Thank you for your kind help.
Christian

Hi Christian,
You don't say what the error is that you are getting - this may help us with your problem!
On the form, do you now have TWO fields - one being the original select list and the other being a read-only version of it? Is it likely that BOTH fields could appear on the page at the same time AND that both are connected to the field on the table?
You can set the select list to be read-only conditionally - in this case you could make it read-only on the condition of the primary key field not being null.
Andy

Similar Messages

Reg: Certain Open Items are not showing in open item clearing F-44

HI all,
I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing. i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
with regards
JK Rao

Hi,
Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator you might not be giving here.
reward pts if useful
regds

Menu items are not highlighted after Design Studio Client 1.3 upgrade

Hi expert I used DS_CLIENT00_0-20011685 patch to update my client. After update I do not see the menu items.
Please help with this.Below is the screen.

Hi,
if this is what you see after start, it it is possible that you face a general issue on Java Runtime level (which version do you have installed)? or on memory allocation level.
do you see any log file located in your workspace? search for *.log. can be that there are some basic exceptions.
also, I do not know if this is upgrade or fresh install.. you can try to uninstall, delete the content of the folder under C:\Program Files (x86)\SAP BusinessObjects\Design Studio\... and then install from scratch again. could be that the upgrade went wrong.
Regards, Karol

Items are not visible in multi-select listbox in a static form

Hi,
I'm using adobe livecycle designer 8.0. I have a multi-select listbox, the items are hardcoded into the form. In runtime, some of the items are selected from the server side when the PDF is generated. If only one item is selected then there is no issue. When multiple items are selected, the list box is behaving as below.
If the PDF is static,
If the listbox is readonly, then all the selected items are visible (highlighted in red)
If the listbix is editable, then it appears blank. If you select it using right click, then you can see all the items and the selected items. But if you click again somewhere outside the listbox, then the listbox goes blank. If you select it using left click, then the previous selections are gone and the items are visible with the item you just selected.
If the PDF is dynamic, then the multi-select is working fine.
Aren't the multi-select listboxes supported in static PDFs?
For your reference, I created 2 templates (static and dynamic) and populating the values using javascript in the docReady event. I'm using \n character as delimter to select the multiple items. Please find them at the below links.Notice the "List Box 1" in both forms. In static form, the values appear only after you right click the listbox.
http://share1t.com/sd4huu
http://share1t.com/hjbfr6
Thanks
Ram

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Most Popular Items are not populating on lists and libraries

When I click the Most Popular items icon, the reports always show zeros. I have been reading that installing OWA has resolved the problem but I need to know if it is REQUIRED to work properly. If anyone has any information on this, please let me know.
I have not been able to find solid proof it is a requirement.
Thanks!

Hi,
According to your description, I have met the same issue with you. The Most Popular Items wasn’t recording any views for documents in the document libraries.
Here is a blog said that only when the documents are viewed in the Office Web App are they recorded for the Most Popular report. But it's always good to test.
http://nickhurstblog.com/2013/04/30/library-most-popular-items-not-working/
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/71066e40-87cd-4a6b-88fd-d78daa1b858f/most-popular-items-not-working-for-document-libraries
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Old confirmations are not visible after user ID is recreated

Hello All,
We had an user which was recreated and the old user ID was deleted. But the old userID had some open confirmations in it. We have changed the GUID of the old user with the new user GUID. So though we can view all shopping carts for the user in SC check status, we cant view the old open confirmations in confirmations link in web frontend.
Please advise if any specific steps needs to be taken to view the old confirmations.
Best regards,
Sambit Mishra

Hi. I do not think you will be able to transfer any old documents to the new user, however you might be able to get the new user assigned to the old data.
You could try and delete the assignment from position to BP for the new BP, then re-assign the old BP, then assign the new user.
I am not sure if it will work though.
There are several threads like this on SDN and I do not think I have seen 1 where anyone has managed to transfer the old documents.
Could you give the user central goods receipt BBPCF03? That way they will be able to see all confirmations for all users.
If you really want a permanent solution to this and the above does not work, you could create a custom authorisation object called "View own confirmations only" and put this in a role along with BBPCF03 access. Then you could use BADI BBP_WF_LIST to say that if the user has this auth object they are only allowed to see their own confirmations, so in transaction BBPCF03 make sure that the user ID that created the confirmation equals the user ID logged on. That means that in central receipt the user will only be able to see and process their own data, but it will be based on user ID, not BP or GUID.
Regards,
Dave.

HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
in my ipod.

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?

My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?

Connect your phone to iTunes, then right-click on the name of your phone on the left sidebar and select Reset Warnings. Then sync again and you should get a warning listing the problem files.

After restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

after restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

From your backup.

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

HI
Sidhu
Tanks For Ur Replay
i am doing as for u r note..
AFTER DEBUGGING....
function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
WI_LIST_S
WI_LIST_E
WI_LIST_F
STATUSFILTER
TASK_FILTER
yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
CAN PLEASE HELP ME
HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
TANKS
RAFI SHAIK

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

2LIS_02_ITM - Deleted items are not in the ODS 0PUR_O01

Hello,
We activated 2LIS_02_ITM extractor. We noticed that the deleted order items are not available in the ODS 0PUR_O01. SAP Note 578471 (Deleted positions in BW and statistics) explains that deleted items are not "statistical" relevant. However, this is an issue for us. Does anybody know if it's possible to change the behaviour of the extractor to keep deleted order items in the ODS ?
Many thanks.
François.

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

I am constantly told by Itunes that 107 items are not synching from my contacts. This is a message from the Conflict Resolver that appears whenever I synch. I try to resolve the synch and a text message pops up telling me it could not find the synch serve

I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
Thanks

Try here:
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Sync Services: Advanced troubleshooting for contact and calendar syncing

Large list items are not crawling

Recently we have migrated SharePoint 2007 application to SharePoint 2013. In that we are having a list which contains 40000+ items and each item have unique permissions set based on the business requirement.
After migration, we have ran full crawl on the web application. After the crawl, the list items are not crawled and displayed in the search results. When checked in the crawl log, there is no entry related to the list items.
Based on suggestions from the blog and microsoft we have changed the FilterProcessMemoryQuota and DedicatedFilterProcessMemoryQuota to 500 MB from 100 MB.
Still, the items are not crawled. Later we have modified some of the items in the list and ran the incremental crawl. The list items which are modified are crawled and available in the search results.
We have scheduled the incremental crawl to run on every night and full crawl to run every week end (saturday) night. What happened is the incremental crawl that run after full crawl deletes all the items which are modified and crawled before the full crawl
with a message "Deleted by the gatherer ( This item was deleted because its parent was deleted. )". This happens only with the incremental crawl run after the full crawl, but the subsequent incremental crawls add the items to the
search results until full crawl run.
Please advise on this.
Ramkumar

40k items with individual permissions? That's going to have significant performance impact across your content database and is getting close to the hard limit(?) of 50k scopes per list http://technet.microsoft.com/en-us/library/gg128955(v=office.15).aspx
Having said that...
Your full crawl is picking up the items but the first incremental crawl is subsequently deleting them. Are you really using Incremental crawl or is this continuous crawling? Are all list items being deleted or merely some of them?
I'd normally put this down to the crawler not being able to identify the items, which may be the case here, but this sounds a little more interesting.

Old items are not populated after adding items into a master/detail form

Similar Messages

Maybe you are looking for