OMB commmand to get the oracle target module?

Hi All,
Can anyone please help me to get the omb command which will give "only" the oracle target module within a single project. I tried with OMBLIST ORACLE_MODULES which is giving me the expected result however, i am not sure whether this is the right command or it has any disadvantage.
below is the sample code after connecting to the repository:-
OMBCC 'ABC' # this is the project
set moduleList [OMBLIST ORACLE_MODULES]
foreach moduleName $moduleList {
puts $moduleName
Do we have anyother command which gives only the target module.
Thanks, Anand.

Hi,
Thanks for the responce.
I tried the command however, got below error:-
OMB+> OMBRETRIEVE ORACLE_MODULE 'ABC' GET PROPERTIES(MODULE_TYPE)
OMB01718: Property MODULE_TYPE not defined.
Here 'ABC' is the target module name.
Also tried the same command with project name, got same result.
please help.
Thanks, Anand Arya

Similar Messages

ORA-20160: Encountered an error while getting the ORACLE user account.

when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it.
They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator. ORA-06512: at "APPS.ALR_PER_ABSENCE__800_53447_IAR", line 3 ORA-04088: error during execution of trigger 'APPS.ALR_PER_ABSENCE__800_53447_IAR'
EBS : 12.1.2
Database : 11.2.0

We are also facing the same issue , with the following error.
The Changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request, Contact your system administrator. ORA-06512: at “ APPS.ALR_PAY_ELEMENT_801_53338_IAR”, line 1 ORA-04088: error during execution of the trigger ‘APPS.ALR_PAY_ELEMENT_801_53338_IAR’
Dear Hussein ,
As per your suggestion , if we disable the trigger , does it workflow goes ahead without any problems ?
By Disabling the trigger , what would be the impact ? I mean does we are going to loose the data that was supposed to be updated the trigger.
And basically please educate me . what is the use of this APPS.ALR_PAY_ELEMENT_801_53338_IAR’ ?
Regards
Raghu

Error while getting the ORACLE user account for your concurrent request

Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
Krishna

Krishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ

PS5 - How do I get the hidden target channel to work with the typing tool?

PS5 - How do I get the hidden target channel to work with the typing tool?
I keep getting this error message everytime I try to move a box around.

Have you tried an Adobe forum? PS5 is an Adobe product!

Getting the Intended Target for a Request

I now know how to set the target for a response:
HttpServletResponse.setHeader("Window-target","myFrameName")
My next question is how do I determine the intended target of the initial request, before I set it to something else with the above code? It doesn't seem to be in the header parameter list. Is there another source?

There's no way to get the initial target from the request. That information isn't sent by the browser. :-/
I didn't even know you could force the response to go in another window from the server-side. Most of the time, you know which window it's going to already, so you have the HTML <form> specify target="myFrameName", which forces the whole request to occur in another window.

How to get the Oracle license#

Hello,
Is it possible to get the Oracle(10g) license# from the already installed DB.
We are using Oracle 10g licensed version.
pls, let me know How to get the license# information?
thanks
Edited by: Zerandib on Dec 10, 2008 9:16 AM

Zerandib,
Please check this link
Oracle License verstion; PIN number
and oracle install doesn't require any license# or part# or code# to unlock. What you have is licensing agreement with Oracle on some terms (best known to your licensing/purcharing/IT dept) how your company will be using Oracle? But if your intent is to learn and educate yourself, you can download and install oracle for free. Once again Oracle software doesn't require any license or code# to install but an agreement for its Usage.
Regards

Problem calling web service: Error while getting the ORACLE user account

Hi All!
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, suddenly I get this error as result:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
- <env:Body>
- <OutputParameters xmlns="http://xmlns.oracle.com/apps/ego/soaprovider/plsql/ego_item_pub/process_item__1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<X_INVENTORY_ITEM_ID xsi:nil="true" />
<X_ORGANIZATION_ID xsi:nil="true" />
<X_RETURN_STATUS>U</X_RETURN_STATUS>
<X_MSG_COUNT>1</X_MSG_COUNT>
<X_MSG_DATA>Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.</X_MSG_DATA>
</OutputParameters>
</env:Body>
</env:Envelope>
Any ideas?
Thanks,
Konrad

hsawwan wrote:
Hi,
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, What are those patches?
# Patch 8407693:R12.TXK.B ISG: Service Generation Failure - Java Compiler Could Not be Found
# Patch 8459663:R12.OWF.B : Mandatory Consolidated One-Off Fixes for ISG on Top of 12.1.1
# Patch 8916358:R12.OWF.B : Service Timeout When Invoking Services Deployed to Integrated SOA Gateway
# Patch 9349321:R12.OWF.B : Issue with item Bulk Load in Oracle Product Hub PIP 2.4
# Patch 9446625:R12.FND.B : 1OFF:8995921:12.1.1:12.1.1:PERF : LoginModules Performance Issue
# Patch 9070077:R12.OWF.B : 1OFF:9045280:12.1.1:12.1.1:Invoking a Web Service Requires NLS Lang When It Should be Optional
# Patch 9153106:R12.OWF.B : IREP_Parser.PL Exits with GETPWUID Function IS Unimplemented in PARSER.PM -> Wichtig für ISG (für custom pl/sqls im ISG)
# Patch 9004712:R12.OWF.B : One-Off for IREP PARSER on Top of Oracle E-Business Suite Release 12.1.1 -> Wichtig für ISG (für custom pl/sqls im ISG)
IAS:
# Patch 8607523 for the AS version 10.1.3.4
Oracle Support told me that I need this patches because of some other problem (generating wsdl and deploy for BOM_BO_PUB package does not work in my environment) and since that, the process_item call stopped working!
btw: The EGO_ITEM_PUB-PROCESS_ITEM call for an existing item still works (I can modify the description), but creating a new item does not work anymore. Here are the parameters I send to the web service:
Header:
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken>
<wsse:Username>sysadmin</wsse:Username>
<wsse:Password
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">sysadmin</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
<q0:SOAHeader/>
Body:
<q1:InputParameters>
<q1:P_API_VERSION>1.0</q1:P_API_VERSION>
<q1:P_INIT_MSG_LIST>T</q1:P_INIT_MSG_LIST>
<q1:P_COMMIT>T</q1:P_COMMIT>
<q1:P_TRANSACTION_TYPE>CREATE</q1:P_TRANSACTION_TYPE>
<q1:P_ITEM_NUMBER>KHR_WS_05</q1:P_ITEM_NUMBER>
<q1:P_DESCRIPTION>desc2</q1:P_DESCRIPTION>
</q1:InputParameters>
Thanks,
Konrad

Where do I get the oracle.jsp.dbutil library

Where do I get the oracle.jsp.dbutil library.
Thanks

Bernhard (guest) wrote:
: thanx for the advice. I think the links you posted will be
: helpful in the future.
: I found the source of my troubles on the SUSE homepage (ver 6.1
: does not use glibc 2.1).
: So now I needto find out how to upgrade to glibc 2.1
Upgrading to SuSe 6.2 would probably do the trick. Upgrade is
really smooth, and will take approximately 1h. I was able
to run oracle 8i client install on my PC and it works (32M,
160MHZ pentium) quite satisfactory. On my server machine
(450MHZ, 128MB) I'm running RH 6.0 and it also works fine.
On SuSe, I removed the "Kaffee" JVM installed by default and
downloaded JRE 1.1.7 from www.blackdown.org. I haven't tried
the "kaffe" engine but Oracle documentation requires blackdown.
Michael, if you read this, have you tried installing with the
default JVM engine delivered with SuSe 6.2?
As long as your operating system name doesn't start with "MS"
you should be OK.
: But first I will buy me a book about LINUX administration and
: hope to find the time reading it.
: Colin. (guest) wrote:
: : Bernhard (guest) wrote
: : : But anyway: This is my first try to install anything on
: LINUX.
: : : If anybody has some good advise for a rookie re.
: installation
: : : of ORACLE SERVER 8.15 on Linux I would be very thankful.
: : Try these links, there's lots of good tips to be found (and
: : thanks to the authors of these sites).
: : => A SuSE developers home page for Oracle.
: : www.suse.de/~mha/oracle/
: : => Install Guide for Redhat.
: : jordan.fortwayne.com/oracle/
: : => Oracle tips & scripts
: : www.akadia.com/html/dod-frame.html
: : amoeba.sagemediagroup.com/oracle_linux_howto/
: : www.orafaq.org/
: : www.oracle-dba.com/
: : www.kevinloney.com/
: : www.bf.rmit.edu.au/~orafaq/contents.html
: : www.lazydba.com/
: : www.dbasupport.com/
: : www.dbspecialists.com/
: : altern.org/place4oracle/oracle_contents.html
: : www.dbdomain.com
null

Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.

Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar.

How could the Oracle Application Module Browser collect all the interfaces?

How could the Oracle Application Module Browser comes with the Oracle AS Adapter collect all the interfaces that are available through Oracle Integration Repository? Is it from the XML description file in the Oracle Integration Repository?
Thanks,
Qing

Did you ever figure this out? I'm encountering the same issue.
Thanks.

Unable to get the Oracle.DataAccess namespace

I'm trying to connect to remote 11g Oracle database using Oracle.DataAccess; working on Visual Studio 2008 installed on Windows XP.
I have downloaded and installed Oracle 11g ODAC and Oracle Developer Tools for Visual Studio 11.1.0.7.20 .
I have also installed OracleXEClient.
I have successfully connected to the database in the Server Explored -> Data connection.
I have successfully connected using the Sql data source. The connection String Provider is providerName="Oracle.DataAccess.Client".
But I cant import - use the Oracle.DataAccess;
using Oracle.DataAccess;
I get this error
Error 1 The type or namespace name 'Oracle' could not be found (are you missing a using directive or an assembly reference?)
How can I solve this problem?
Edited by: Daniel Dimov on Apr 29, 2010 10:26 PM

Hi Ershad,
Check the value of the ORACLE_HOME variable.
Also check other oracle variables.
Please check this link:
/community [original link is broken];jsessionid=8d92200630d63622db0ec9a0476182d4ea3eddad1206.e34Tb34Lb34PbO0Lb3eTahiPc3yNe0?messageID=1104338&#1104338
Regards,
Siddhesh

How to get the text in module pool program after f4 help

Hi to all experts,
My required is to get the text of a field when the user clicks on the f4 help text should be populated automatically beside the field
how to do it

>
> the screen name is defined as t528t-plstx and while passing im using the same name in the POV module after what could be the reason;
Hi in the POV module, first read the dynpro filed for which a text has to be displayed (using FM- DYNP_VALUES_READ)and then update your Text Description field uing the FM -'DYNP_VALUES_UPDATE
    dynpfields-fieldname = 'FNAME'.                  "FNAME is the field for which POV is called
    append dynpfields.
    repid = sy-repid.
call function 'DYNP_VALUES_READ'
       exporting
            dyname     = sy-cprog
            dynumb     = sy-dynnr
       tables
            dynpfields = dynpfields
       exceptions
            others.
   read table dynpfields index 1.
   fname = dynpfields-fieldvalue.
*Fetxh the Text field into a local varaible.
    l_plstx = XXXXXXX.
    dynpfields-fieldname    = 'T528T-PLSTX'.
    dynpfields-fieldvalue   = l_plstx.
    APPEND dynpfields .
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = sy-repid
        dynumb               = sy-dynnr
      TABLES
        dynpfields           = dynpfields.
This will update your text field dynamically.
Regards,
Rajesh

SQL query to get the monitor target on a monitor

Hi!
I have a list of some custom created Monitors. I need a list of which computers that are using the monitors, the "Monitor target". Please help me with this. It need to be a SQL Query because my powershell have stopped working.

Yes that is what i have explained you with the screenshot right it is the one in your screen shot also which is mentioned as (This). If this is a default group then you will not get agents for that refer the below link on how to pull agent list of the Target
group
http://msdn.microsoft.com/en-us/library/bb960484.aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
Or look at this. You can see what groups the agents are associated manually one by one by using the default SCOM Task.
Go to Administration==> Agent managed==> Select the agent ==> Right click it and click View ==> Select state view.
Once you select this you will have another window opened for that particular agent.
Then click on the name of the agent and on the right hand side bottom you will have a default made task to check to what group's or Targets this agent is associated to. Run that task and you will get the output.
Look at the ones highlighted in RED
Below is the screenshot for your reference. Hope this helps
Gautam.75801

Can I get the oracle database schema in xml like the original ones

Working with Migration Workbench I've found that uses an XML
with the schema of the original database. I'm asking if I can
get the equivalent XML for the oracle model.
I need a quickly way of get in XML the structure (not data) of
my oracle databases.
Any idea?

Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com)

How to get the oracle 10g database backup.

Hi,
i have installed oracle 10g.i need to get the back up of db.
i have search so many sites.i didn't get much information.
some guys tells we go to installed directory in that run"RAMNS".
i am following in the process.after run the rams which commands
i have to used to get the db back up.
C:\Oracle\app\oracle\product\10.2.0\server\BIN\RAMNS
RAMNS>...(here is the prob which commands i have to used)
i have seen another way solution is you can use "imp" and "exp" present in BIN to take back up.(how to follow this)
please help me,

Would suggest you read the docs on backup, restore. if you cannot restore you db, you are in trouble. read it and understand it well.
Summary:
For 10g, you have rman, imp/exp and datapump import/export (replaces imp/exp).
For very simple backups where you have windows you can shut down, run a cold backup. shutdown the database, copy the database files, and startup. i also take copies of the current pfile and anything else important to restore the database with. we copy the files to a dedicated backup file system, which go to tap, e.
That will give you a simple option to restore.
For prod databases, you typically want archive mode on which means you can run hot or online backups. just remember you have to have the archive logs generated during the hot backup. you now also have the ability to do a point in time restore.
Exp or datapump exp can be used for metadata exports, full exports or partial (schema, table, etc) as needed. i typically run a cold or hot plus an export for redundacy and restore options, but db size will change how you back things up.
You can find plenty of scripts to automate these. just understand how the scripts work and understand the process itself. if not, you will have trouble restoring when it is needed the most.
Rman is also a good option with the latest releases.

OMB commmand to get the oracle target module?

Similar Messages

Maybe you are looking for