ORA-20160: Encountered an error while getting the ORACLE user account.

when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it.
They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator. ORA-06512: at "APPS.ALR_PER_ABSENCE__800_53447_IAR", line 3 ORA-04088: error during execution of trigger 'APPS.ALR_PER_ABSENCE__800_53447_IAR'
EBS : 12.1.2
Database : 11.2.0

We are also facing the same issue , with the following error.
The Changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request, Contact your system administrator. ORA-06512: at “ APPS.ALR_PAY_ELEMENT_801_53338_IAR”, line 1 ORA-04088: error during execution of the trigger ‘APPS.ALR_PAY_ELEMENT_801_53338_IAR’
Dear Hussein ,
As per your suggestion , if we disable the trigger , does it workflow goes ahead without any problems ?
By Disabling the trigger , what would be the impact ? I mean does we are going to loose the data that was supposed to be updated the trigger.
And basically please educate me . what is the use of this APPS.ALR_PAY_ELEMENT_801_53338_IAR’ ?
Regards
Raghu

Similar Messages

Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.

Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar.

Error while getting the ORACLE user account for your concurrent request

Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
Krishna

Krishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ

Problem calling web service: Error while getting the ORACLE user account

Hi All!
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, suddenly I get this error as result:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
- <env:Body>
- <OutputParameters xmlns="http://xmlns.oracle.com/apps/ego/soaprovider/plsql/ego_item_pub/process_item__1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<X_INVENTORY_ITEM_ID xsi:nil="true" />
<X_ORGANIZATION_ID xsi:nil="true" />
<X_RETURN_STATUS>U</X_RETURN_STATUS>
<X_MSG_COUNT>1</X_MSG_COUNT>
<X_MSG_DATA>Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.</X_MSG_DATA>
</OutputParameters>
</env:Body>
</env:Envelope>
Any ideas?
Thanks,
Konrad

hsawwan wrote:
Hi,
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, What are those patches?
# Patch 8407693:R12.TXK.B ISG: Service Generation Failure - Java Compiler Could Not be Found
# Patch 8459663:R12.OWF.B : Mandatory Consolidated One-Off Fixes for ISG on Top of 12.1.1
# Patch 8916358:R12.OWF.B : Service Timeout When Invoking Services Deployed to Integrated SOA Gateway
# Patch 9349321:R12.OWF.B : Issue with item Bulk Load in Oracle Product Hub PIP 2.4
# Patch 9446625:R12.FND.B : 1OFF:8995921:12.1.1:12.1.1:PERF : LoginModules Performance Issue
# Patch 9070077:R12.OWF.B : 1OFF:9045280:12.1.1:12.1.1:Invoking a Web Service Requires NLS Lang When It Should be Optional
# Patch 9153106:R12.OWF.B : IREP_Parser.PL Exits with GETPWUID Function IS Unimplemented in PARSER.PM -> Wichtig für ISG (für custom pl/sqls im ISG)
# Patch 9004712:R12.OWF.B : One-Off for IREP PARSER on Top of Oracle E-Business Suite Release 12.1.1 -> Wichtig für ISG (für custom pl/sqls im ISG)
IAS:
# Patch 8607523 for the AS version 10.1.3.4
Oracle Support told me that I need this patches because of some other problem (generating wsdl and deploy for BOM_BO_PUB package does not work in my environment) and since that, the process_item call stopped working!
btw: The EGO_ITEM_PUB-PROCESS_ITEM call for an existing item still works (I can modify the description), but creating a new item does not work anymore. Here are the parameters I send to the web service:
Header:
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken>
<wsse:Username>sysadmin</wsse:Username>
<wsse:Password
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">sysadmin</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
<q0:SOAHeader/>
Body:
<q1:InputParameters>
<q1:P_API_VERSION>1.0</q1:P_API_VERSION>
<q1:P_INIT_MSG_LIST>T</q1:P_INIT_MSG_LIST>
<q1:P_COMMIT>T</q1:P_COMMIT>
<q1:P_TRANSACTION_TYPE>CREATE</q1:P_TRANSACTION_TYPE>
<q1:P_ITEM_NUMBER>KHR_WS_05</q1:P_ITEM_NUMBER>
<q1:P_DESCRIPTION>desc2</q1:P_DESCRIPTION>
</q1:InputParameters>
Thanks,
Konrad

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

Hyper-V encountered an error while Configuring the network on Vmachine

Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill

Error while starting the Oracle BI Server

Hi ,
I am getting the services.msc error while starting the Oracle BI Server as -
Error handling the control request.
Please help me out ..
Thanks and Regards ,

It is actually Windows services error that I am facing ....
while starting the BI server after making any changes to NQS config file ..
Could not start the Oracle BI Server service on Local Computer
Error 1064: An exception occured in the service when handling the control request
Message was edited by:
user460211
Message was edited by:
user460211

Evdre encountered an error while retrieving the data

hi
all
i have an error
"evdre encountered an error while retrieving data" evdre addin
evdre cannot retrieve data
working on ms 7.0 bpc
excel 2003
i have gone thru the sap service place and found that i have to replace 2003 to 2007
please let me know also if there is any possibility to change my reports in such a way that i may pass with out this error
what is the mistake i am doing while i create the reports ?
ur help is appreciated
thanks

This error message has many root cause.
First let's check if the installation of BPC client is correct.
Just use a simple EVDRE functions and try to expand.
Are you receiving any error? If yes then I suggest to try also for Apshell ppset.
If it is not working then that's means you have a problem with installation.
If you can use EVDRE from another machine then the problem is installaytion of the client.
If the problem is into all computers then the problem is into server.
If the problem is just into one report then you have to review that report because some parameters sent to EVDRE are wrong otit is trying to retrievea region which is toobig.
I hope this will help you toinvestigate the issue.
Regards
Sorin Radulescu

Error while running the Oracle Text optimize index procedure (even as a dba user too)

Hi Experts,
I am on Oracle on 11.2.0.2 on Linux. I have implemented Oracle Text. My Oracle Text indexes are fragmented but I am getting an error while running the optimize_index error. Following is the error:
begin
ctx_ddl.optimize_index(idx_name=>'ACCESS_T1',optlevel=>'FULL');
end;
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 941
ORA-06512: at line 1
Now I tried then to run this as DBA user too and it failed the same way!
begin
ctx_ddl.optimize_index(idx_name=>'BVSCH1.ACCESS_T1',optlevel=>'FULL');
end;
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 941
ORA-06512: at line 1
Now CTXAPP role is granted to my schema and still I am getting this error. I will be thankful for the suggestions.
Also one other important observation: We have this issue ONLY in one database and in the other two databases, I don't see any problem at all.
I am unable to figure out what the issue is with this one database!
Thanks,
OrauserN

How about check the following?
Bug 10626728 - CTX_DDL.optimize_index "full" fails with an empty ORA-20000 since 11.2.0.2 upgrade (DOCID 10626728.8)

Error while doing the Oracle 9i Database Installation

PROBLEM ONE
While installing the Oracle Database 9i on Windows 2000 Server with 256 MB Ram, I got the following error
Windows - Wrong Volume
The wrong volume is in the drive. Please insert volume ORCL9011_1 into drive E:.
This message occured when percentage done was 100%. It was copying visualsdo.exe
PROBLEM TWO
Then I deinstalled the Oracle 9i software and deleted the oracle folder from both the Windows Explorer as well as in the RegEdit.
Again I started doing the installation...
In Oracle Database Configuration Assistant, while it was installing "Adding Oracle JVM", I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-06576:not a valid function or procedure name"
When I clicked Ignore I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-04021:timeout occured while waiting to lock object
SYS.META-INF/MANIFEST.MF"
Please let me know why this problem occured and what is the solution for this......
If you need any information then please let me know
With Regards
Deepak

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Fully_qualified_remote_host_name while Configuring the oracle User's Enviro

Hello All,
I am installing Oracle 11g R2 on HP-UX server.
I am connected to the HP-UX server through putty.
On the Quick Installation guide i reached the section "Configuring the oracle User’s Environment" and i have the below questions:
In the below
Enter the following command to ensure that X Window applications can display
on this system:
$ xhost fully_qualified_remote_host_name
what is the fully_qualified_remote_host_name ? is it the IP address of the my own PC where i am connecting to the remote server? or the IP address of the server it self?
and in the below example
$ export DISPLAY=local_host:0.0 -- local host is the IP of the PC i am connecting from it to the server?
Regards,

Hi;
In the below
Enter the following command to ensure that X Window applications can display
on this system:
$ xhost fully_qualified_remote_host_name
what is the fully_qualified_remote_host_name ? is it the IP address of the my own PC where i am connecting to the remote server? or the IP address of the server it self?
and in the below example
$ export DISPLAY=local_host:0.0 -- local host is the IP of the PC i am connecting from it to the server?If you use putty than you need to some program like VNCviwer or xming etc. to can see GUI screen on your desktop.Please check my previous post
Re: 11gR2 Grid Infrastructure cannout launch installer OEL 5.5
Still have some issue than update thread.
Regard
Helios

Locked the oracle User account

How to know who(os Name/ User/ Locked Time) locked the oracle User account

1) You didn't mention an Oracle version. If you're on 10.2, perhaps this discussion
http://www.pythian.com/blogs/284/oracle-102-migrations-%E2%80%93-account-lockedtimed-and-failed_login_attempts
would be interesting.
2) DBA_USERS isn't going to tell you who caused the account to be locked. Just that it is locked and when it was locked.
Justin

Getting Error While Opening the Oracle Form 6i in 10g

Hi All ,
FRM-10102: Cannot attach PL/SQL library XXX. This library attachment will be lost if the module is saved.
I am getting above error message while opening Oracle 6i Form in 10g.
I get the following Alert message when I try to attach the library to my form -
Attached library name
S:\.........xxx.pll contains non-portable directory specification. Remove path? Yes/No?
If I select 'No', the Form compiles and runs without any error.
But if I select 'Yes', I get the following error message:
FRM-40039: Cannot attach library xxx while opening form.
All files (fmb, fmx, pll, plx) are on the same path. I detached and then re-attached the library but this didn't work for me?
Help Appreciated.
Thanks & Regards,
Ram.

use the shiped batch program frmplsqlconv.bat to convert all your forms/librarys from Forms 6i to 10g.
you can call it in wizard mode from the start menu (e.g. OracleDeveloperSuite <OraHome> => Forms Developer => Forms Migration Assistant (GUI Mode) and follow the instructions step by step
or you can call it by batch to convert all your forms/librarys. The batch file is found in
<ORA10g_HOME>BIN\frmplsqlconv.bat
=>
frmplsqlconv.bat <formname>

Error while getting the NotificationTemplate from NotificationService

Hi all
iam intrested in getting NotificationTemplate object using the NotificationService class' api using below code
   NotificationTemplate objtemplate =objNotificationService.lookupTemplate(templateName.trim(),enLocale);when i execute the above code iam getting the exception
<Incoming message header or abbreviation processing failed
java.io.InvalidClassException: org.eclipse.persistence.internal.helper.DatabaseTable; local class incompatible: stream classdesc serialVersionUID = -3104383536215490874, local class serialVersionUID = -8219935847209476671
java.io.InvalidClassException: org.eclipse.persistence.internal.helper.DatabaseTable; local class incompatible: stream classdesc serialVersionUID = -3104383536215490874, local class serialVersionUID = -8219935847209476671I searched this on forums i found that it is due to different versions of the eclipselink.jar so i added the eclipselink.jar in my JDevloper's class path and also added same jar in the
my Jdevloper's weblogic path C:\jdevweblogic11g\oracle_common\modules\oracle.toplink_11.1.1
Still iam getting the the above exception.
please suggest me some solution.

Hi all
when i run my below code as a standalone java application the code will execute fine..
NotificationService objNotificationService = client.getService(NotificationService.class);
NotificationTemplate objtemplate =objNotificationService.lookupTemplate(templateName.trim(),enLocale);but when i execute the above mentioned code as a web application using ADF, JDEvloper 11.1.1.4 and weblogic server it will give me error below.
<Jul 13, 2011 10:13:52 AM IST> <Error> <RJVM> <BEA-000503> <Incoming message header or abbreviation processing failed
java.io.InvalidClassException: org.eclipse.persistence.internal.helper.DatabaseTable; local class incompatible: stream classdesc serialVersionUID = -3104383536215490874, local class serialVersionUID = -8219935847209476671
java.io.InvalidClassException: org.eclipse.persistence.internal.helper.DatabaseTable; local class incompatible: stream classdesc serialVersionUID = -3104383536215490874, local class serialVersionUID = -8219935847209476671
     at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:562)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1583)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1316)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     Truncated. see log file for complete stacktrace
>
The exception ; ; nested exception is:
     java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
     java.io.InvalidClassException: org.eclipse.persistence.internal.helper.DatabaseTable; local class incompatible: stream classdesc serialVersionUID = -3104383536215490874, local class serialVersionUID = -8219935847209476671; nested exception is: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
     java.io.InvalidClassException: org.eclipse.persistence.internal.helper.DatabaseTable; local class incompatible: stream classdesc serialVersionUID = -3104383536215490874, local class serialVersionUID = -8219935847209476671
javax.ejb.EJBException: ; nested exception is: so i replace all the refrencence of eclipcselink.jar file in my weblogic enviornment with the same version which iam using.
still iam getting that same exception mentioned above.
so please provide me some pointers to above problem.how we can tell weblogic server to load test. jar file insted of other version of test.jar
Thanks and Regards.
Edited by: Bipin Patil on Jul 12, 2011 11:42 PM

Error while getting the Direct parent group from IUser

Dear all,
I'm using KM API's to upload documents to KM through a Webdynpro Application.
The uploading of the document is working correctly. the permission setting to the newly uploaded document is done based on user group in which the user is a member.
This is also working.
While uploading, the user gets a selection screen to choose the area.
If the user is a member of All India that person will get option to select all branches and all areas under each branch.
If the user is a member of any one branch, he can select only areas coming under his branch.
Here the problem starts. (All India is the parent group for all branches, under branch some areas are there.)
User 1 is a member of All India
User 2 is a member of Branch1
If an All India user comes in we give the branch list in a dropdown list. Branch user should not get this dropdown. He's not supposed to upload documents for any other branch.
I am checking the parent group of the user identify his Level. But even if the user is not a member of All India, I'm getting the dropdown to choose the branch.
Please give me your valuable guidance to solve this.
My code for getting the parent group is given below.
public com.sapportals.portal.security.usermanagement.IGroup getParentGroup( com.sapportals.portal.security.usermanagement.IUser ep5User )
    //@@begin getParentGroup()
        String [] parentGrp=null;
        IGroup parentGroup=null;
        try
             IGroupFactory groupFact=WPUMFactory.getGroupFactory();
             /* Get all the User groups in which the user is a member */
             String [] userGroup=ep5User.getDirectParentGroups();
             for(int i=0;i<userGroup.length;i++)
                  IGroup userGrp=groupFact.getGroup(userGroup<i>);
                  if(userGrp.getId().startsWith("B00") || userGrp.getId().equalsIgnoreCase("ALL_INDIA"))
                       msgMngr.reportSuccess("ID of the group "+userGrp.getId());
                       parentGroup=userGrp;
                       break;
        catch(UserManagementException e){
             msgMngr.reportException("UserManagementException"+e,false);
        return parentGroup;
    //@@end
Best Regards,
Aparnna

I found a solution. Not sure if its the correct one.
Used the com.sap.security.api.IUser and used the below code to check if the user is a member in group
IUser user=WDClientUser.getCurrentUser().getSAPUser();
               com.sap.security.api.IGroup grp=UMFactory.getGroupFactory().getGroupByUniqueName("ALL_INDIA");
               if(grp.isGroupMember(user.getUniqueID(),false))
//code to be executed if the user is a member
Best Regards
Aparnna

ORA-20160: Encountered an error while getting the ORACLE user account.

Similar Messages

Maybe you are looking for