On 32.0.3 startup loads homepage, but on exit no "Save & quit"

I have FF load my homepage & Google. Last version on exit would ask me about "Save & quit." Now it just quits and all my tabs are dumped.

If you have multiple browsing windows open then you need to use File > Exit or the button in the 3-bar menu to close all open windows at once.
Otherwise only the last closed window will be restored on the next start and other windows are possibly listed under recently closed windows.

Similar Messages

  • My home page is Google but everytime I close Firefox it opens to the last page viewed. Startup is set to "show my homepage" but it's still not working. HELP!!

    My home page is Google but everytime I close Firefox it opens to the last page viewed. Startup is set to "show my homepage" but it's still not working. I've tried so many things but nothing seems to work. Can someone please give me "Simple" answer.

    Running FF 18, lots of my add ons no good with 20 on PC.
    Thanks

  • Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.

    hi, please help.
    Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
    i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
    How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
    Please please help!!!

    Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.

  • IMac keeps shutting down during startup loading bar under apple sign

    My electricity went out and came back on a minute later. When my computer started up again the font was back to original factory setting. I then restarted my computer and every time it would load up it would shutdown. The computer chimes and then reaches a grey screen with an apple sign. Below it is a loading bar. This bar loads about 10% then goes back down and loads from 0%. A couple minutes later it shuts down after staying at 0%. It keeps doing this routine every time I start the computer. I then did a command s and rebooted the computer to factory reset it. The computer still shuts down and has the old habit of reaching 10% and 0% with the loading bar but now after the loading bar is at 0% it then disappears to the Apple sign and a loading circle. It then shuts down again. This iMac was originally 10.6.8. but i believe i updated it to 10.9.4 and was purchased new around 2008. I also tried to put in a CD with Firmware Restoration CD 1.7. but that didnt work. Can anyone help? or has anyone had similar issues?

    Hello canwary
    Good job on troubleshooting your issue so far. For most issues that deal with your Mac not starting up, consult the article below to see what the issue could be. 
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/TS2570
    Let me know if this helps,
    -Norm G. 

  • I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

    i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 9
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Why slow startup loading (55 secs)

    Have you had any feedback on LabView 7.0 regarding "slow startup loading" or "slow shutdown"? When I click my icon to start LV 7.0 it takes several seconds (55) to get to the first screen and another 40 seconds to get to the second one. On exiting, the program it normally enters a "not responding" mode. While in the program, it appears to operate normally.

    That should be more than enough. I'm not sure how many others have kept 6.1 on with a LV 7 install (there have been a few smatterings of install issues w/ LV 7, most notably w/ network installs). If I was the one dealing with it, I'd uninstall all Labview programs from all versions and do a clean LV 7 install and see if that fixes it (with the idea being that if it doesn't, I'd do a format c:, reinstall the OS and then LV 7, but I like to minimize variables when dealing with it). If you are working in XP or Win2k, you can monitor how much memory is being allocated to LV 7 and how much is free, just to see if that's an issue (ctrl-alt-del and use the Task Manager).
    2006 Ultimate LabVIEW G-eek.

  • ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

    I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
    I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
    However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
    Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
    I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
    I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
    Any suggestions much appreciated!

    Maybe these will help:
    https://discussions.apple.com/message/17677533#17677533
    https://discussions.apple.com/message/18324129#18324129
    https://discussions.apple.com/message/18203126#18203126

  • Doesn't open with homepage, but rather with last site visited

    When I view a site and close it and then reopen Firefox, the last visited site will open instead of my homepage.
    Also, I noticed that this only happens when I have another smaller window open.
    For example, if I have a msnbc streaming video window playing, (just the video, not the msnbc homepage) but I'm viewing another homepage; That other homepage will open again.
    Does this have to do with the small video window that's open? Do I have to close ALL windows to keep this from happening?

    Hello ams963, i think the problem is with TrueCrypt because it is not support your win 8 yet. see: http://www.truecrypt.org/
    http://www.truecrypt.org/docs/version-history
    see if can find a method in the next link, not too useful i think for your win 8 : [http://kb.mozillazine.org/Protect_the_profiles_contents Protecting the contents of the profile]
    thank you

  • Created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, it comes up on each page as a small black dot. How do I get the nav bar to load up and show?

    I created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, where the nav bar should be is only a small black dot on each page. How do I get the nav bar to load up and show? It was a disaster loading up my site as it changed the case of the letters and at first no pages were seen, so I had to go through and change the letters that were supposed to be cap, back to cap in every file. I don't know if this has something to do with it or not. The tech support doesn't have an answer. Please let me know if you have any ideas and solutions. Thanks bunches!

    Here are links to the simple 7 pages....
    http://www.rednosedesign.net/home.html
    http://www.rednosedesign.net/about_us.html
    http://www.rednosedesign.net/logos.html
    http://www.rednosedesign.net/flyers_&_ads.html
    http://www.rednosedesign.net/notecards.html
    http://www.rednosedesign.net/business_cards.html
    http://www.rednosedesign.net/contact_us.html

  • My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premier

    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!

    Hi Bryan,
    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!
    Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
    Hope that works for you.
    Kevin

  • In Options -- General -- I want the option to "Show my windows and tabs from last time" AND "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D

    In Options --> General --> I want the option to "Show my windows and tabs from last time" '''''AND''''' "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D

    You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
    You can look at one of these extensions:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
    * New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

  • I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have, it conects to my itunes and computer, but just won't get passed the logo..what can i do? :/

    I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll

    Does anyone know what causes this error? The application installed on my machine is using Adobe Air.dll version 2.0.3.13070
    This dump file has an exception of interest stored in it.
    The stored exception information can be accessed via .ecxr.
    (2b84.2908): Application hang - code cfffffff (first/second chance not available)
    eax=00000000 ebx=05105dbc ecx=0c013503 edx=00002b84 esi=77f15b70 edi=00000002
    eip=00a68972 esp=0012e03c ebp=00000000 iopl=0         nv up ei pl zr na pe nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00040246
    Unable to load image c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for Adobe AIR.dll
    *** ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll
    Adobe_AIR+0x58972:
    00a68972 8bec            mov     ebp,esp

    Hi,
    Check weather its right path or not.Even check the call interface,weather you are giving the right one or not.
    Regards,
    Srikanth

  • After updating iTunes to 11.0.1.12 and updating Apple TV to 5.1.1 my Apple TV is no longer picking up my photo library. It just keeps saying "loading library" but never brings the pictures up. This didn't happen with previous versions. Any ideas?

    After updating iTunes to 11.0.1.12 and updating Apple TV to 5.1.1 my Apple TV is no longer picking up my photo library. It just keeps saying "loading library" but never brings the pictures up. It also tells me that home sharing isn't on even though it is and then I have to turn it off and on on the PC so the Apple TV even recognizes the photo library. These issues didn't happen with previous versions. Any ideas?

    Update on my previous comment. I have solved my issue. Issue was with Windows 7 firewall not operating correctly. I was unable to add itunes to the 'Allow programs to communicate through windows firewall'. Found the following page useful http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-fire wall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-b561-bc49cbdad904
    Followed the instructions to the foot of the page, restarted PC, normal service resumed on windows firewall, added itunes to list to communicate through firewall. restarted itunes, restarted appletv, success!!!
    Hope this may help somone else.

Maybe you are looking for