-- On-save RPT file, source code is emptied --

Dear,
I have converted a C# project to the latest CR2010 for VS 2010
I have 1 RPT file and each time I want to save it, the source code (behind) is emptied.
For example, my report named by 'crpPV.rpt' has a code-behind C# file crpPV.cs. That .cs file is emptied when I save the rpt file in Visual Studio 2010.
This behaviour only happens for this certain rpt-file in my project. For all other RPT-files in the same project, I don't have any problems (with editing/running).
Can someone help me locate the issue with this report?
When I try to run the application and show the report, the application crashes ( could not load the report...)
For all other reports, everything works well.
Can anyone help me with this?
Thank you in advance!
Best regards,
Jens

Can you answer my last question? How do you load the .rpt file in code?
Are you using it as a ReportDocument or as a strongly-typed report?
ReportDocument Code
string filename = "c:\folder\myreport.rpt"
ReportDocument boReportDocument = new ReportDocument();
boReportDocument.Load(filename);
Strongly Typed Report
MyReportName boReport = new MyReportName();

Similar Messages

Save weblog with source code

Hi,
Does anyone an easy way of downloading weblogs with source codes?
If I select all/copy&paste into Microsoft Word 2000 (SP3), the source codes get this "nice" frame, where they are scrollable. When I save it and open it again, the source code is not scrollable, so I can only diplay the part of it:-(
Is there a way of avoid it from my side?
I know from the composer side it can be done, as foir example Sergei did in his weblog:
/people/sergey.korolev/blog/2005/03/14/the-time-for-me-to-have-a-badi-of-my-own
Or is it planned to change this annoying scrollable code frame?
Thanks,
Peter

Printing of Weblogs
Take a look at that thread for some possible help.
As for the "annoying scrollable code frame" well we've been doing it for awhile now and nobody has been complaining too loudly.
If the thought of everyone is to be rid of the textarea then I suppose I wouldn't have a problem using the styles instead.

Why does the Save As File command create an empty .eml file?

When I use the >Save As >File command with a selected email, a .eml file is created with the right name, but it is empty.
I am using Thunderbird 31.2.0 on OS X 10.8.5.

(1) Our office computer has the full website - and the same folders that
are on the server. Essentially a mirror image. We were saving the corrected
html file into the folders we had already set up on the computer. Then FTP'd
it later.
(2) We set up the local site in DMW indicating that we will not be using
"server technology", "edit local copies on my machine and then upload to the
server," "files stored on my computer", "how to connect to remote server -
none" (we use a separate FTP program to upload).

Process Multiple Files:"source folder is empty"

When i try to select a particular folder I get the message,"the source folder is empty".
The folder does have images in it,having checked in preview and file info and double clicking on it.
It seems only to be affecting this particular folder.
Any ideas people?
Thanks in advance!

The issue can be due to:
1) Space in the folder name.
2) Some specific permissions or file types etc.
I would suggest creating a new folder and copy your images into it and try.
ALso in case you still have an issue please share the exact location name or screenshot of the settings you doing in PMF dialog box.
-Garry

Very Easy Question: How to view source code of JAR file

Hi Experts,
1) Can we can see the content of JAR file?
2) How we can we see content of JAR file?
3) I have with me JAR file. It is sap.compcui_gpoadp~ObjectAndDataProvider.JAR. I have to make some changes in the JAR file source code. How I can find the source code?
I tried to see the source code using NWDS. However, I can not see the code.
Regards,
Gaurav

>
Gary wrote:
> Can I make changes in the source code of JAR file? Can I make changes in the code?
You cannot do this by simple repacking/rearchiving of JAR, because it contains special descriptor with fingerprint. In general, JAR is unmodifiable, however, you can create a new one with modified sources.
You can try to import the JAR in some Java project in Eclipse, for example. Then make your changes and use the Eclipse's Export JAR wizard in order to repack the modified source Java files in a new JAR.
>
Gary wrote:
> Can I rename the JAR file and still it will usable? Please confirm.
I general, yes, the operation is allowed. However, you cannot do this with JAR deployed on some J2EE server or Portal, for example. Because there are references to it.
>
Gary wrote:
> Please let me know if by any chance I can see the content of JAR file in NWDS.
Yes, sure. Use Import from Archive wizard in Eclipse. Or add the JAR in the class path of some Java project and Eclipse will show you the content of it.
BR, Sergei

How to release top-level VI (only) source code?

Hello,
I am developing an addon to an application I already have. The application is large (over 1,500 VI's) and the VIs are set up to compile with mostly default settings (there's a top-level VI, a few with Front Panel visible, most of them are not visible).
The customer wants the source code to the work I'm going to do, and it's going to use many existing sub-VI's. The addon itself will be a sub-VI (I have a Main.vi that basically opens 'screens', and this is a new screen). The existing sub-VI's basically do the data collection and processing, and the new code will do some additional processing and have a nice GUI to the existing code. The customer wants the source so they can make modifications as needed.
Is there any easy way to provide just the source for the top-level VI? Basically, I want to give them M.vi, where M.vi calls n.vi, o.vi... etc, but o-z.vi need to remain closed-source. Also, M.vi is called by Main.vi, which opens screens A-M.vi
One option is do copy the entire application, then open every sub-VI and save it without Source Code. But with so many files, this seems like a bad idea. I also then have to maintain two applications.
Any good ideas out there? It seems so easy in other languages (use object files) that it seems like there should be a solution here I'm not seeing.... Thanks!
Message Edited by rnelsonee on 06-02-2010 08:28 AM
Message Edited by rnelsonee on 06-02-2010 08:31 AM
Solved!
Go to Solution.

Dont know if this is the best solution for you, but you can create a "virtual folder" in the LabVIEW project with all the sub-VIs that you want to keep closed-source. Then create Source Distribution build specifications in the project and remove the block diagrams assign passwords to all VIs in the virtual folder. See attached pics.
Attachments:
Project.JPG ‏23 KB
SrcDist.JPG ‏62 KB

Apache TomCat 6.0 - Generate Servlet Source Code

sup java experts,
does anyone know how I can view the Servlet source code that's generated by the JSP engine?

lol...thanks. I know it sounds like a dumb question after having read your answer but I thought TomCat (by default) doesn't save the auto-generated .java files and that i'd have to turn on that feature somehow.
Anyway, just to wrap up this question for future viewers, it turns out TomCat 6.0 does save the servlet source code generated by the JSP engine. I found mine in
C:\web\Tomcat 6.0\work\Catalina\localhost\_\org\apache\jsp\marc\test_jsp.java
Tomcat 6.0 = my installation folder
marc = a folder I created under the "ROOT" directory (the folder where you put your .jsp files so that the server can find them)
Thanks again njb7ty!

Generated XML doc file contains comments from MFC source code

Hello, in my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes, see the part of generated xml file:
Is there a solution to ignore these MFC cpp files?
Many thanks
Regards
Petr Stejskal
<?xml version="1.0"?>
<style xmlns="http://www.w3.org/1999/xhtml">@namespace html url(http://www.w3.org/1999/xhtml); :root { font:small Verdana; font-weight: bold; padding: 2em; padding- } * { display: block; padding- } html|style { display: none; } html|span, html|a
{ display: inline; padding: 0; font-weight: normal; text-decoration: none; } html|span.block { display: block; } *[html|hidden], span.block[html|hidden] { display: none; } .expand { display: block; } .expand:before { content: '+'; color: red; } .collapse
{ display: block; } .collapse:before { content: '-'; color: red; } </style><doc><assembly><assembly>
"Console" </assembly></assembly><members><members><member name="T:_RS"><member
name="T:_RS">Reed-Solomon codec control block</member></member><member name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)"><member
name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)">Mode indicator. See Table 2 in Appendix 1 of JIS X0510:2004, pp.107.</member></member><member
name="M:CMFCControlRenderer.IsScaled"><member
name="M:CMFCControlRenderer.IsScaled"><summary><summary>Tells whether this control
renderer works with scaled (resized) images.</summary></summary><returns><returns>Returns TRUE if this control
renderer works with resized (scaled) images.</returns></returns></member></member><member name="M:CMFCControlRenderer.SmoothResize(System.Double)"><member
name="M:CMFCControlRenderer.SmoothResize(System.Double)"><summary><summary>
Smoothly resizes images.</summary></summary><param name="dblScale" /><param
name="dblScale"> Scale ratio.</param><returns><returns>
TRUE if resize succeeds; otherwise FALSE.</returns></returns></member></member><member name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><member
name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><summary><summary>
Creates a 32 bit bitmap from the specified bitmap.</summary></summary><returns><returns> A handle to created
bitmap, or NULL, if creation fails.</returns></returns><param name="bitmap" /><param
name="bitmap"> A handle to the original bitmap.</param><param name="clrTransparent"
/><param
name="clrTransparent"> An RGB value specifying transparent color of the original bitmap.</param></member></member><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><summary><summary>
Creates an empty 32 bit bitmap.</summary></summary><returns><returns> A handle to created bitmap, or NULL,
if creation fails.</returns></returns><param name="size" /><param
name="size">Specifies bitmap size.</param><param name="pBits" /><param
name="pBits">When the function returns contains a pointer to bitmap bits.</param></member></member><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><summary><summary>Rotates
a source DC content inside the given rectangle by +/- 90 degrees</summary></summary><param name="rectDest" /><param
name="rectDest">Destination rectangle</param><param name="dcSrc" /><param
name="dcSrc">The source device content.</param><param name="bClockWise"
/><param
name="bClockWise">TRUE - rotate +90 degrees, FALSE - 90.</param></member></member><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><summary><summary>Deletes
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of the key to be deleted.</param><param name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><summary><summary>Opens
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of a key that this function opens or creates.</param><param name="ulOptions"
/><param
name="ulOptions">This parameter is reserved and must be zero.</param><param name="samDesired" /><param
name="samDesired">A mask that specifies the desired access rights to the key.</param><param
name="phkResult" /><param
name="phkResult">A pointer to a variable that receives a handle to the openedkey.</param><param
name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member></members>

Hi stejsky,
Thank you for posting in MSDN forum.
>>In my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes.
Based on your issue, could you please tell me how you use the option /doc to generate XML doc file from your source codes?
If you use the option /doc to generate the XML doc file by right-click the your MFC project->Properties->Configuration Properties->C/C++->Output file->set the Generate XML document files as Yes(/doc) like the following screen shot.
(1)If yes, since we could not reproduce your issue in mu side, so if possible, I suggest you could share me your MFC project so that we will further help you support this issue.
You could upload your MFC project to the OneDrive and then copy link here.
(2)If no, please try the above way to generate XML doc file and then check if you still get same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Save a File form a JAVA code into the CDrive

Hello, i need to create a file and save it in the Cdrive of my computer.
I could create the file and get the command prompt to ask me the file name to save it.
However, my problem is that the file is saved in the Cdrive with nothing inside! I can manage to save the file and give it a name, but i can't save the inside of it... the page comes blank...
if someone could help me and tell me why the inside isn't there and how to fix it, it could be very very helpfull!
thx
waiting for any reply
the part where i know i got it wrong is this:
// Save the File.txt in the Cdrive + MSG
               System.out.println( FILENAME_MSG ) ;
               BufferedReader br = new BufferedReader( new InputStreamReader ( System.in ),1 ) ;
               PeastBase = br.readLine() ;
               FileOutputStream fout = new FileOutputStream ( PeastBase ) ;
               OutputStreamWriter out = new OutputStreamWriter ( fout , "Shift_JIS" ) ;
               // Write in File
               out.write( CopyBase ) ;
               // Save PeastBase
               out.flush() ;
               // Close the Bufferedwriter
               out.close() ;
Anyway these are the complete code in case of need:
import java.io.*;
import java.util.ArrayList;
class Exp11 {
     public static void main(String[] args) throws IOException{
          try{
               File objCopyBaseFile = new File( "aaa" ) ;
               File objPeastBaseFile = new File( "bbb" ) ;
               //MAX Letters and Lines Input
               final int MAX_COLS = 10 ;
               final int MAX_ROWS = 10 ;
               final String START_MSG = "Input any LETTER" ;
               final String START_MSG1 = "10 LETTERS per Line, 10 LINES Max is Possible" ;
               final String START_MSG2 = "Input w will Save the FILE and FINISH" ;
               final String COUNT_STRING_ERROR = "Letters Input per Line is OVER" ;
               final String COUNT_ROW_ERROR = "Lines Number is OVER" ;
               final String FILENAME_MSG = "Input the File Name" ;
               String PeastBase ;
               String InputBase ;
               String cpBuffer ;
               String CopyBase ;
               int rownumber ;
               PeastBase = " " ;
               InputBase = "w" ;
               cpBuffer = " " ;
               CopyBase = " " ;
               rownumber = 0 ;
               FileOutputStream fos = new FileOutputStream( "fos.txt" ) ;
               OutputStreamWriter ow = new OutputStreamWriter( fos , "EUC-JP" ) ;
               BufferedWriter bw = new BufferedWriter( new FileWriter ( "out.txt", true )) ;
               // Start MSG
               System.out.println( START_MSG ) ;
               System.out.println( START_MSG1 ) ;
               System.out.println( START_MSG2 ) ;
               // Input
               ArrayList<String> array = new ArrayList<String>() ;
               int i ;
               i = 0 ;
               do {
                    BufferedReader br = new BufferedReader( new InputStreamReader ( System.in ),1 ) ;
                    PeastBase = br.readLine() ;
                    // Let's Count
                    if( !PeastBase.equals( InputBase) ){
                         rownumber ++ ;
                         // Check the Input letters
                         if ( countString(PeastBase,MAX_COLS )){
                              array.add(PeastBase) ;
                         else{
                              System.out.println( COUNT_STRING_ERROR ) ;
                         // Check the Lines
                         if ( countRow( rownumber,MAX_ROWS )){
                              array.add( PeastBase ) ;
                         else{
                              System.out.println( COUNT_ROW_ERROR ) ;
               } while ( !PeastBase.equals( InputBase ) ) ;
               // enter the data
               for( int      j=0;j<array.size();j++ ){
                    System.out.println( "How Many Time Input==>"+array.get(j) ) ;
               // Save the File.txt in the Cdrive + MSG
               System.out.println( FILENAME_MSG ) ;
               BufferedReader br = new BufferedReader( new InputStreamReader ( System.in ),1 ) ;
               PeastBase = br.readLine() ;
               FileOutputStream fout = new FileOutputStream ( PeastBase ) ;
               OutputStreamWriter out = new OutputStreamWriter ( fout , "Shift_JIS" ) ;
               // Write in File
               out.write( CopyBase ) ;
               // Save PeastBase
               out.flush() ;
               // Close the Bufferedwriter
               out.close() ;
          catch ( IOException e ){
               System.out.println( e ) ;
          finally{
     static boolean countString ( String bufString , int maxCount ) throws IOException{
          int StringCnt ;
          StringCnt = 0 ;
          // Count Letters per Lines
          StringCnt = bufString.length() ;
          if( maxCount>= StringCnt ){
               return true ;
          else{
               return false ;
     static boolean countRow ( int rownumber , int maxLine) throws IOException{
          int StringLine ;
          StringLine = 0 ;
          if( maxLine>= rownumber ){
               return true ;
          else{
               return false ;
PLEASE ANY HELP
THX

I'm not great with IO yet, but I see you use
out.write(CopyBase);But I only see you initialize CopyBase to equal an empty String.
So it should be writing nothing to the file.

How do I save PDF files by default to the folder of the source file?

How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

Old version Source code to .exe file conversion

I have a programming GUI source code (written in an older version of LabVIEW). Can it be supported by LABview Evaluation version 10.0.1 and be converted to an .exe file. How can I convert and use source code file for programming? What do I need to convert and how?
I'm new to LABview. Please help!!

2010 can open VIs written in LabVIEW 6.0 or newer. Just double click on the top level VI. You will also need to install any hardware drivers (i.e. GPIB, DAQ, etc) that the old program used.
With the evaluation version, you can create an exe but it will have a watermark on the front panel.

Error: missing ] after element list Source File: javascript:%20[object%20XULElement] Line: 1, Column: 9 Source Code: [object XULElement]

Can you help me out in letting me know what this means and how I can fix this? I found it in my tools menu under error console. It was listed as a warning, but then there was a option to highlight and evaluate the original warning message that was listed as
Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped.
Source File: http://www.msn.com/
When I cut and pasted message in the code evaluate box and pressed enter the warring message became an error then stated:
Error: missing ; before statement
Source File: javascript:%20Warning:%20Expected%20color%20but%20found%20'null'.%20%20Error%20in%20parsing%20value%20for%20'background-color'.%20%20Declaration%20dropped.%20Source%20File:%20http://www.msn.com/%20Line:%200
Line: 1, Column: 10
Source Code:
Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped. Source File: http://www.msn.com/ Line: 0
I am writing to ask for guidance on what to do and how to fix this.
I current have Firefox as my default browser. I have IE 9 and Windows 7 home ed on my HP lap top that has AOL preloaded into it as the mail provider. I am a beginner user and when I got the computer my cousin set up Mozilla and Firefox as a search browser and I like it.
I also have norton security

I think, the problem is with the order (in configuration file) of path to search headers:
     /opt/oracle/product/10g/10.2.0/precomp/admin/pcscfg.cfg
          sys_include=(/usr/include,/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
          include
          include=(/usr/include)
          include=(/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
In the filesys:
     ./usr/include/sys:
     -r--r--r-- 1 bin bin 17786 Aug 13 2007 types.h
     ./opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include/sys:
     -rw-r--r-- 1 root system 18288 Mar 22 2008 types.h
     mode_t came from:
     #include <sys/types.h>
sys/types.h:
     * POSIX Extensions
     typedef unsigned int uint_t;
     typedef unsigned long ulong_t;
     * POSIX and XOPEN Declarations
     #if defined(_LP64) || defined(_I32LPx)
     typedef uint_t mode_t; /* file attribute type */
     #else
     typedef ulong_t mode_t; /* (historical version) */
     #endif

How to get the source code in PAR file

Hi All,
I used the PAR migration tool to migrate from PAR to EAR file. When I imported the EAR into NWDS 7.3, I was just able to see the structure and jsp files and could not find the java source code files. I would requires the java source code to make modifications so that deprecated APIs can be replaced and to also make the code compatible with JDK 1.6.
I think the original 7.0 PAR file itself does not contain the source code. I decided to use the "Include source code" option when exporting the 7.0 PAR.
I have the portal application DC project in my NWDS 7.0. However, when I try to export the PAR file using Export --> PAR File -- > Next... I am unable to select any project from the list. The list appears blank with disabled Next & Finish buttons.
I also noticed that in the portal DC application structure, there is a .sda file under /gen/default/deploy. Also there is no PAR folder under /gen/default/public.
How do I include the source in the PAR file so that I can edit the same after migrating to EAR format ?
Regards,
Melwyn

DC and PAR/EAR stuff are different formats, SC/DC is an archive type used by NWDI, if I got it right.
How do I go about generating the PAR file (with source) ?
In fact through including the seources while creating the PAR/EAR in NWDS, but: no need to do that, you can also depack SDA (rename it to zip). If you wanna just see the Java sources you will find them there, otherwise decompile as Vijay already sad.
cheers

How to convert class file to Java source code ?

Hi All ,
Currently am working in Peoplesoft Demo project using java as Plug in.We have only the class files and jar files and we have planned to modify the code for future enhancements.We dont have any legal issues here as we are already working with our client for the original source code.
Kindly help me out in doing this reverse engineering process.We have come to know the below steps would help us out.Can someone guide us in acheiving this process step by step.Please add your experience here and let us know what are the other steps required ..
(1)Rename the file from .jar to .zip and extract the .zip file.
(2)Decompile the desired .class file using 3rd party tool and get .java file.
(3)Modify the .java file and compile it.
(4)Now zip the extracted files and rename the it from .zip to .jar.
We need to verify whether the modified .jar file will work
Thanks & Regards
Kar1983

Thanks for your reply ....We have asked them so many times ..but they say they dont have it .Since we have planned to do some enhancements from our end we have planned to do reverse engineering process.

The jsp file does not open the new login window but opens the source code.....plz help

When i try to log in to the log in link at the site https://efp.bpcl.in the log in page does not open but the firefox wants to ask with which program the firefox should open the file and when we give firefox or internet explorer than it opens the source code.Plz help...

Those files are send as application/octet-stream and that makes Firefox display a download dialog.
http://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types

-- On-save RPT file, source code is emptied --

Similar Messages

Maybe you are looking for